Sort By
Per Page
View
Grid
List
Glenn Lucas 1'' Radius Edge Skew Chisel
Glenn Lucas 1'' Radius Edge Skew Chisel which is used for planing cuts and detailed work on spindles.
This is Glenn's preferred shape of skew chisel.
The handle is 10" in length
Woodpeckers in-DEXABLE Combi Square
The Woodpeckers in-DEXABLE Combination Square with 300mm metric blade and Rack-It.
The combination square was invented in 1878 and has been copied countless times over the years, but it has rarely been improved upon. The Woodpeckers in-DEXABLE Combi Squares features the following......
Laser accurate scribing guides every millimetre.
Positive indexing every 30mm.
Laser engraved metric...
Flexcut #8 Interchangeable Gouges
The Flexcut No.8 Sweep Gouges are interchangeable blades with a medium curved cutting edge. These unhandled gouges are compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Available Widths:
1/4" (6mm) SK428
3/8" (10mm) SK402
11/16" (17mm) SK702
7/8"...
Veritas Miniature Honing Guide
It may be stating the obvious, but at some point the blades of the Veritas miniature tools will require sharpening and honing. This 1/3 scale version of the Veritas Mk1 honing guide is a natural extension to the Veritas miniature tool collection. This fully functional honing guide will help keep the miniature blades in peak condition.
The guide consists of a honing guide and an angle jig. The honing...
Robert Sorby ProEdge Proset
Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset.
By placing the gouge into the clamp of the profile arm and then extending the gouge up-to the required stop and locking it into place will allow for precise and repeatable bevel angles to be obtained.
Tormek Bench Grinder Mounting Set
If you need to remove a lot of steel to create a desired shape on a new tool, this Tormek Bench Grinder Mounting Set BGM-100 enables you to use the Tormek woodturning jigs also on your bench grinder.
Take control of your profiles
No matter which grinding machine you use, the most difficult part in sharpening woodturning tools is to exactly replicate the shape and the edge angle.
With the BGM-100...
Crucible Dovetail 1:
4 Dovetail Template
4 Dovetail Template
The Crucible 1:4 Dovetail Template marks out dovetail joints – both the tails and the pins – and allows you to easily and accurately lay out the angled and straight parts of the joint. This template marks out Christopher Schwarz's favorite dovetail slope: 1:4 (about 14°). The square end of the tool allows you to also use it as a saddle square (and to not get turned around by two...
Crucible Sliding Bevel
For some woodworkers – particularly chairmakers – a small sliding bevel that locks tightly is an essential tool. Most inexpensive sliding bevels can be knocked off their settings with little effort, and the results can be a disaster. Because sliding bevels guide most of the joinery in a chair, being off by 1° or 2° can ruin a workpiece.
The Crucible Sliding Bevel is designed...
Robert Sorby Standard Skew Chisels
Robert Sorby standard skew chisels are rectangular in section, giving this type of of skew more weight. This makes them superb for large spindle work e.g kitchen table legs and newel posts.
Saburrtooth 1/8'' Long Ball Nose - 1/8'' x 1 1/4''
Saburrtooth 1/8" long ball nose available in fine and coarse.
Head Diameter: 1/8"
Head Length: 1¼"
Saburrtooth 1/8'' Taper - 1/8'' x 7/8''
Head Diameter: 1/8"
Head Length: 7/8"
If grits are not displayed they are no longer available.
Warrington Pattern Hammer
Words from Christopher Schwarz......
''Small cross-peen hammers are incredibly useful in furniture making. We've used them in our work for more than 20 years.
Americans don’t have much of a history with this form of hammer. It’s a British thing, just like the lump hammer we make. We don’t know why that is the case because Warringtons are quite useful.
This small...
Gyokucho Small Gardening Saw - 150mm blade
A dedicated gardening saw with a wooden handle and sheath. Tapered saw plate designed for pruning.
Gyokucho Razorsaws cut on the pull stroke. The blades are thin, but the teeth are very tough: perfect for making smooth, clean and precise cuts. The blades are nickel plated which helps prevent rust, and will also assist in stopping gunk such as sap getting stuck to the blade.
No need to use excessive power, let the weight of the saw so the work.
Made in Miki City, Japan.
Robert Sorby Standard Spindle Gouges
The Robert Sorby Standard Spindle Gouges are ideal tools for detailed work between centres, such as creating coves, beads, and other profiles on spindle projects. Available in sizes ranging from 1/4'' to 3/4'', these gouges feature comfortable handles and are suitable for turning projects like goblets, vases, and egg cups.
Kirjes Sanding & Polishing Motor
The Kirjes Sanding & Polishing Motor includes 2 drill chucks 0-10mm, 3000rpm, 300w, Height 150mm = 6"
Total length 300mm = 12," Weight 4.5kgs = 10lbs
Chucks tapered-connected = vibration free running.
Note; not rated for continuous use
Glenn Lucas Bowl Gouges
The Glenn Lucas Bowl Gouge - 3/8'' Round Bar (GL5S) or 1/2'' round bar (GL5)
Both can be used for the finer cuts on both the inside and outside of a bowl.
Handle is 16" for the GL5 and 14'' for the GL5S.
The gouges feature a secondary bevel on the heel to give the tools some clearance when going around tight corners making concave curves or coves.
Robert Sorby Bedan Parting Tool
The Robert Sorby bedan parting tool is used in the same way as the beading and parting tool the relieved side bevel allows the tool to plunge cut in bowls and boxes with little risk of binding.
3/8" Bedan Parting Tool - 18¾" with handle.
Henry Taylor No.8 Allongee Gouge - 2 1/2'' (63mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Replacement Blade for Nakaya Universal Dozuki Saw
Replacement blade for the Universal Dozuki Saw.
This saw combines both rip and cross cut on one cutting edge
J-WDU245 spacing 1.5 mm (finer)
J-WDU248 spacing 1.8 mm (coarser)
Bullnose Replacement Iron Ray Iles
This replacement iron fits the Record Bullnose No.s 076, 077, 077A & the equivalent plane by Preston. This iron also fits the Record 311.
These replacement irons are made of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C and will have edge keeping qualities equal to the originals.
Veritas Bevel-Up Jointer Fence
The Veritas low-angle jointer fence enables you to shoot consistent and accurate square or bevelled edges with your Veritas bevel-up jointer. The 11" long anodized aluminium fence can be attached to either side of the plane with the brass thumbscrews provided; a set screw can be adjusted to square the fence to the sole.
As supplied, the 2" tall guiding face can be used to plane edges perfectly...
The Woodland Axe Sheath
These axe sheaths from Wood Tools will fit their The Woodland Axe.
This axe sheath is made of full grain veg tanned leather from Clayton’s of Chesterfield. These sheaths are made with strong rivets and brass press studs. They are a snug fit and will keep the sharp edge of your axe safe for many years.
As with all natural materials, the leather will vary from batch to batch.
Made Sheffield
Veritas Special Bench Bolts
Most European benches use a bolt system to fasten leg sets to stretchers. The main advantage is that you can snug the bolts if anything loosens due to changes in humidity.
The solid brass nuts on our bench bolts slide into a pre-drilled hole in the stretcher, and distribute pressure to prevent breakout. A bench can be made very rigid (without complex joinery) by using a wide stretcher, since the...
Mukwa (Umbilo/Kiaat)
This wood is popular in Souh Africa with furniture makers and woodturners. Soft in comparison to the rest of our exotic timbers
Flexcut Skewed Detail Knife KN34
The Flexcut Skewed Detail Knife gives the user a different approach to a detail or paring cut.
Instead of a perpendicular bevel as found in many detail knives, this bevel is slightly skewed.
The handle shape allows holding like a pencil or a conventional knife.
Veritas Wooden Plane Hardware Kit + PM-V11 Blade
With this kit (and basic woodworking skills) you can build a bevel-down wood-bodied smooth plane with a Norris-style mechanism for easy depth and lateral adjustment.
The kit includes a blade, a Norris-style adjuster with a steel cup to seat it in, plus a knob, tapped insert and cross pin for the lever cap, all made of brass. The lapped PM-V11 blade is 1/8" thick and 1 5/8" wide with...
Veritas PM-V11 Blades for Vintage Bench Planes
Veritas offer top-quality replacement blades for other manufacturers’ bench planes (e.g., Stanley or Record) in PM-V11 tool steel. All are lapped on the face side to a flatness tolerance of 0.0005'' (0.0127mm) or better, with an average roughness (Ra) of 5 microinches (0.000127mm) or better.
The blades are 0.100'' (2.54mm) thick, 25% thicker than the industry standard of 0.080''...
Benchcrafted Mag-Blok Maple
We've had our eye on these Mag-Bloks by Benchcrafted for years and years, but sadly they'd previously had an agent in the UK. Thankfully, things have changed and we can import the Mag-Bloks alongside their wonderful bench hardware.
The Mag-Bloks are equally fantastic in both the home and the workshop. We use them here in the shop to display bench chisels, and a couple of us have them in...
Edge Toolworks Moxon Vice
A beautifully made, ready to go straight from the box (no assembly required) Moxon Vice. Made by Matthew Collins Furniture under their brand of 'Edge Toolworks'. Matt runs a successful workshop in Standlake, Oxfordshire which he set up in 1990, and has been a customer of Classic Hand Tools for as long as we can remember! Matt's team use these vices in their workshop and have done so...
Gyokucho Compact Set of 2 (Ryoba & Jushi) - 180mm blades
2 saws, each with 180mm blades.
Double edged Ryoba and the single edged, backed Jushi.
Hock 1' Chip Carver Knife
A traditional Chip Carving Knife is a short-bladed knife used to make triangular shaped cuts to create intricate designs in wood. Designs carved in this fashion are cut into the wood or incised, not relieved.
The length listed is an approximate blade length.
Handles are made from Jatoba with nothing more than an oil finish.
Oscar Rush Small Carving Axe
A small carving axe for all sizes of carving.
This stout hand forged carving axe has a 95mm - 100mm (4'') edge - SYMMETRICAL grind (also known as double grind).
The head weight is approximately 475 - 500g.
If striking the poll, do so with a wooden mallet (not a steel hammer).
The handle is hand carved by Oscar, 275mm - 285mm long (just over 11''), faceted, kiln dried ash...
Pair of Mounting Knobs for Veritas Universal Variable Angle Fence
A pair of stainless-steel knobs for mounting the Veritas universal variable angle plane fence to the bevel-up jointer, jack rabbet and shooting planes.
Made in Canada.
Robert Sorby Standard Bowl Gouges (Deep Flute)
The Robert Sorby standard bowl gouges are a must in the tool kit of every bowl turner.
These tools are ideal for making bowls, capable of producing either massive profiling cuts or delicate finishing cuts as necessary.
Saburrtooth Flat Faced Shaping Wheel - 4'' Sanding Disc
Saburrtooth 4" flat faced shaping wheel.
Bore Size: 7/8"
If grits are not displayed they are no longer available.
Tormek T-8 Original Sharpening System with Hand Tool Kit
Package deal contains the Tormek T-8 Sharpening System with Tormek HTK-906 Hand Tool Kit
Veritas Optional Depth Stop for Small Router Plane
This optional stainless-steel depth stop is for use with the Veritas Small Router Plane. To limit cutting depth to a preset maximum, the stop clamps onto the blade shaft.
Made in Canada.
Flexcut 3' Draw Knife KN25
This handy little draw knife by Flexcut was developed for fan carving but works great for skinning small areas of bark and roughing-off corners.
Made in the USA by Flexcut.
Henry Taylor Large Slipstone
One of 2 slipstones made by Henry Taylor, this one measures 115 x 45mm and tapers from 11mm to 4mm in thickness.
Abranet Dust Extraction Block
The 70mm x 125mm sanding block with hook and loop backing for quick attachment.
4 metre extraction hose available separately.
Flexcut Whittler's Kit KN300
The Flexcut Whittler's Kit is a 2 piece knife set with Sharpening Compound to keep your knife blade sharp.
Knives included in the set are
KN13 Detail Knife
KN27 Mini Detail Knife
Clifton No. 410 Shoulder Plane
The Clifton 410 Shoulder Rebate Plane fills the need for a narrow light and accurate shoulder plane. The cutting iron fits smoothly onto the machined pads in the body and can be finely adjusted by means of a screw..
Cutter: 11/16" (18mm) wide
Length of plane: 5.1/2" (138mm)
Approximate weight: 1.1/4"lbs (0.58kg)
Made in Sheffield, UK
The Decorating Elf - Bud Cutter
The bud cutter is an optional extra for The Decorating Elf.
The Decorating Elf is the most versatile texturing tool available and so simple to use.
Designed by William Hudson (USA), known to his friends as the 'Turning Elf'. Ideal for decorating pens, boxes, finials, bowls, jewellery, Christmas decorations, toys, key rings, pepper & salt mills and lots, lots more.
Cuts wood - side and end...
Flexcut Hook Hone PW18
The Flexcut Hook Hone is used to sharpen the inside edge of any hook knife. This sharpening tool used abrasive paper as a more aggressive solution than stropping to remove nicks and scratches from the cutting edge.
Includes 400 and 600-grit abrasive paper and an instructional guide.
Replacement Blade for Nakaya Kataba 250mm Folding Saw
Blade 0.5mm thick
Spacing 1.36mm for cross cut
Benchcrafted Benchmakers Hardware
Typical captive nut arrangements for knockdown bases involve either a square nut, recessed hex nut, or short, slotted cross-dowels. All of these fasteners make it tricky to assemble the joint without some frustration or extra tools.
The BenchCrafted barrel nuts and end cap barrel nuts are the ideal choise for making knock-down joints in workbench bases.
The set of 4 zinc-plated steel Barrel Nuts are...
Narex Gimlets
Gimlets are used as a right-hand drill for small openings or as a pre-drilling tool to prepare openings for screws.
The Narex gimlets are made of tool carbon steel by traditional forging and subsequent grinding technique in the same way as it was done more than one hundred years ago. Special geometry of the edge enables self-cutting into the wood or other soft materials without using much force.
The Large Carving Axe Sheath
These Wood Tools axe sheaths will fit their Large Carving Axe.
The sheath is made of full grain veg tanned leather from Clayton’s of Chesterfield. These sheaths are made with strong rivets and brass press studs. They are a snug fit and will keep the sharp edge of your axe safe for many years.
As with all natural materials, the leather will vary from batch to batch.
Made in Sheffield