Sort By
Per Page
View
Grid
List
Flexcut 70 deg. Scorp KN24
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
Muller French-Style Sculptors Adze
Again, these adzes are from Leonhard Muller's Carpenter's Hatchets range but they are based on the traditional French design where the head gradually flares from the poll. 3 sweep widths to chose from and all come with straight hickory handles.
Straight 450mm hickory handles (about 18")
Choice of 65mm, 60mm or 56mm wide medium sweep cutting edge.
Pfeil Back Bent Gouges Series 10
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Pfeil Violin Maker's Gouge
Pfeil Violin Maker's Gouges are made of high-alloy carbon steel, the blades are razor sharp, and are ready to use.
Plum handles with brass ferrules. With a bent blade for shaping the tops and backs of stringed instruments, they are forged in one piece and have an inside bevel..
Replacement Tip for Veritas Japanese Style Awls
The replacement tip for the Veritas Japanese-Style Awls is A2 steel hardened to Rc60-62 for toughness.
Saburrtooth 1/8'' Sphere - 1/4'' x 1/4''
Head Diameter: 1/4"
Head Length: 1/4"
Saburrtooth 1/8'' Taper - 1/8'' x 7/8''
Head Diameter: 1/8"
Head Length: 7/8"
If grits are not displayed they are no longer available.
Shinwa Protractor No.182 Chrome Finish
Center lock nut has a needle built-in so that it can be pushed to create a mark.
Measures 0 - 180° with a reverse scale.
150mm stainless steel blade with a hard chrome coating for easy reading (and a 100mm scale).
90mm wide body.
Thomas Flinn 3ft One Man X Cut Saw
One Man Crosscut - 3ft - Great Amercian Tooth.
These saws are equally popular in forestry work as they are at home cutting up smaller logs for firewood.
The Thomas Flinn 3ft One Man X Cut Saw has a clear finished beech handle and comes complete with an auxiliary handle which can be attached to the front of the blade so you can get some additional assistance with cutting if necessary. The handle...
Tormek Wide Centreing Knife Jig
This well balanced, patented jig provides extra stability when sharpening knives with long, flexible blades such as fillet knives. With the KJ-140 Wide Centreing Knife Jig, you achieve a symmetrical grind with the same angle on both sides of the blade. Regardless of the thickness and geometry of the blade, it will self centre in the jig, giving you the same result on both bevels. The longer clamp stabilises...
Veritas Bar Gauge 12'' Extension Rods
This pair of 12'' extension rods can be used to extend the reach of the Veritas bar gauge, Veritas beam compass, or Veritas marking and transfer tool.
It can also be used with the fence and centre kit for the Veritas plunge base for rotary tools or the fence and centre kit for compact routers, in order to extend the reach of the fence. The rods have a male thread at one end and a female...
Veritas Beam Compass Heads
Using a regular compass for small circles is OK, but for projects involving large circles or arcs, our beam compass heads are ideal.
The aluminium heads clamp onto a piece of wood between 5/8" and 3/4" thick, creating a compass whose radius is limited only by the length of stock you have at hand. Each brass clamping knob holds the head securely to the beam using a trapped pin that prevents pivoting...
Robert Sorby Relief Cutting Tool
The Robert Sorby Relief Cutting Tool enables the turner to produce a recess prior to threading.
Veritas Miniature Bevel-Up Jack Plane
This fully functional 1:3-scale version of Veritas' low-angle jack plane is the latest in their line of miniature tools. At 5" long and almost 1" wide, it weighs just over 4 oz, a useful size for fine trimming work. It has a 3/4" wide A2 blade with a 25° bevel angle and a 13° bed angle. The stainless-steel Norris-style adjuster lets you set the blade with precision.
The body is made from investment-cast...
Flexcut 21 Piece Deluxe Starter Set SK108
This Flexcut Deluxe Starter Set has everything a new woodcarver needs. It comes with 16 interchangeable blades, two quick-connect handles - ABS and Power - and a Cutting Knife. There's also a SlipStrop, Gold Polishing Compound and an owner's manual showing how to care for the tools.
Plus you'll find a FREE step-by-step, instructional DVD for a great first project.
Profiles included:
SK406...
Hamlet 3/16'' Diamond Parting Tool
The Hamlet diamond parting tool is not made from diamonds, sorry to disappoint! It refers to the diamond shaped profile which reduces friction, and therefore heat to avoid unwanted burn marks, or even splitting. The shape also reduces the risk of binding in the cut.
Tormek T-8 Custom
Customise your own water cooled sharpening system with a Tormek T-8 Custom. This package enables you to create your own Tormek sharpening system, with your favourite accessories. Just add grinding wheels, honing wheels, the right jigs and your own creativity.
* Create your own sharpening system.
* Grinding wheel and honing wheel not included.
* Sharpen all your edge tools.
* Water cooled sharpening...
Silky F180 Folding Saw - 180mm blade
The Silky F180 folding saw is a lightweight folding pocket saw aimed mainly at the light pruning and gardening market.
The blade is 180mm long with a large tooth configuration of 7.5 teeth per 30mm. The blade locks in two positions to allow flush cuts.
Combination Arkansas Bench Stones Soft / Hard Black
Combination Arkansas Bench Stones
David Barron Dovetail Kit Bundle
A David Barron inspired dovetailing bundle!
The Japanese pullsaw that David demonstrated with, the ever popular Gyokucho Razorsaw Dozuki 240mm Rip Saw
3 David Barron Guides - 1:6 and 1:8 dovetail guides plus the 90 degree guide.
The Knew Concepts 5'' fret saw with lever tension and swivel blade complete with a dozen Pegas #7 tooth blades (15tpi) as recommended by David.
...
Replacement Blade for Nakaya Kataba 250mm Folding Saw
Blade 0.5mm thick
Spacing 1.36mm for cross cut
Flexcut 5 Piece Lino & Relief Printmaking Set SK130
Hours of creative lino cut and printmaking fun!
Auriou 4 in 1 Rasp
Flat on one side, convex on the other, with two stitches (grain 7 & 9). Use the finer stitch across the grain and the coarser stitch with grain when speed and close dexterity are needed. Useful for stickmakers and knife handle makers.
Veritas Scraper Shave
The Veritas Scraper Shave is a versatile small scraper suitable for small-scale work, fine detailing, or any application where a normal scraping plane would be too large.
The design of the tool allows a controlled scraping action that effectively smoothes the workpiece. Can be used as a companion tool with the chair devils for smoothing of non-round chair parts such as crest rails, arm bows and...
Barr 2 1/2'' Leather Guard
Designed to fit the Barr Small and Large Slicks, these hand-crafted leather guards will help protect your investment. The guard has an ABS plastic backing insert which is sandwiched between saddle grade leather, stitched and riveted. Will also fit other chisels upto 2 1/2" wide, but designed with the Barr small and large slicks in mind.
Pfeil Medium Sized Tools - Spoon Gouges
Pfeil Medium Sized Tools for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The Pfeil Medium Sized Spoon Gouges come in 2 options:
D5A Series 5 - 8mm width.
D8A Series 8 - 7mm width.
Veritas Carvers Screw
Turned from a solid bar of brass, this carver's screw, with its tapered tip and high-profile threads, grips securely and guarantees that remounted pieces are held as securely the third and fourth time as they were the first.
The hex portion clamps securely in a vice while you thread on a blank, or you can use a spanner. The moulded tightening knob has a low-friction brass insert. At 5" long overall,...
Veritas Lapping Grit 90x Silicon Carbide 4oz
Silicon carbide is ideal for flattening oil and water stones or lapping plane bottoms and blades. Just sprinkle the grit on a piece of glass or a steel lapping plate, add a shot of oil or water (as required), and lap the item flat. This fast and easy process lets you keep all of your stones dead flat.
90x is used for most applications.
Using PSA-backed plastic laminate sheets on glass speeds...
Masasa
This is a hard wood used by turners and in furniture making. Its heartwood is reddish brown with occasional black or grey streak
Making Woodblock Prints
By Merlyn Chesterman & Rod Nelson,
Woodblock printing is an ancient art form, which produces beautiful, subtle and lively pieces with just a few simple materials. This book introduces the art, and shares technical information and ideas for those with more experience. Drawing on the vibrant living traditions from China and Japan, it is both a technical guide and an inspiration.
Includes:
A...
Veritas PM-V11 Blades for Vintage Bench Planes
Veritas offer top-quality replacement blades for other manufacturers’ bench planes (e.g., Stanley or Record) in PM-V11 tool steel. All are lapped on the face side to a flatness tolerance of 0.0005'' (0.0127mm) or better, with an average roughness (Ra) of 5 microinches (0.000127mm) or better.
The blades are 0.100'' (2.54mm) thick, 25% thicker than the industry standard of 0.080''...
2 3/8'' Blade for Clifton No.4 1/2, 5 1/2, 6 & 7 Bench Plane
2 3/8'' blade to fit the Clifton No.4 1/2 smoothing plane, and the No.5 1/2 jack plane
The Clifton bench plane blades are made from O1 steel that has been cryogenically treated to give a hardness of 60 to 62 Rockwell C. 3.6mm thick
2 3/8'' (60mm) wide
Made in Sheffield, UK
Flexcut Mini-Palm Set FR604
As the name implies, this Flexcut set was made for miniature carving. Model-makers, as well as those who enjoy carving fine detail, find these tools quite handy. Ranging in size from 1/8-inch down to 1/16-inch, these tools make others seem like crayons when you really need a sharp pencil.
Also a good choice for printmakers.
Palm Tools included: FR600 #3 x 1/8', FR601 #5 x 1/8', FR602...
Gyokucho Blade for Compact Kataba Atsuba 180mm (293)
Replacement for the Gyokucho #293 saw
Gyokucho Fugaku Folding Dozuki 240mmm Crosscut
Full Name : Gyokucho Razorsaw Fugaka Folding Dozuki.
Blade Length : 240mm.
Overall Length : 540mm open / 290mm closed.
Max Cutting Depth : 45mm.
Teeth Pitch / TPI : 1.5mm / 16.9
Blade Thickness : 0.3mm.
Teeth Pattern : Crosscut.
Gyokucho Product Number : 110.
Weight : 320g
Replacement Blade : S110
Pretty much the same as the standard range of saws, but these fold which means it can stored...
Hamlet Woodturning Boxed Set - 5 piece
The Hamlet woodturning boxed set of 5 includes:
3/4" Roughing Gouge (HCT064)
1/4" Spindle Gouge (HCT067)
1/2" Skew (HCT100)
1/2" Round Nose Scraper (HCT116)
1/4" Parting tool (HCT091)
HCT064 - 3/4" Spindle Roughing Gouge
Made in Sheffield from M2 High Speed Steel, this Spindle Roughing Gouge is a forged bar and comes with a 10-inch beech handle. Its primary...
Pfeil Purfling Pick
The Pfeil Purfling Pick is used for cleaning the purfling channel.
Cutting width is 2mm and has a plum handle.
Saburrtooth Adapter 1/4'' Shank
Cup Adapter 1/4" Shank (required for use with all 2” wheels)
Thread: 3/8" x 24 TPI
Shank: 1/4"
Fits: 1 3/4" Cups, 2" Cups & 2" Wheels
Weight: 2oz
Please Note:
Not for use on METAL or CERAMICS.
Safety: Always use approved eye protection and safety devices!
Recommended Operating Speed: 4,000 to 25,000 RPM
"
Robert Sorby Standard Spindle Gouges
The Robert Sorby Standard Spindle Gouges are ideal tools for detailed work between centres, such as creating coves, beads, and other profiles on spindle projects. Available in sizes ranging from 1/4'' to 3/4'', these gouges feature comfortable handles and are suitable for turning projects like goblets, vases, and egg cups.
Glenn Lucas 5/8'' Bar Bowl Gouge
The Glenn Lucas 5/8'' Bar Bowl Gouge with 16'' handle.
This tool is great for the rough shaping of wet or dry bowls as well as refining work.
The gouge features a secondary bevel on the heel to give the tool some clearance when going around tight corners making concave curves or coves.
Flexcut Pro Series - Pack of 2 Knives with Small/Slim Handle FP100
This set of two knives delivers the Flexcut Pro experience for users who prefer a smaller and slimmer handle.
The small/slim handle is approximately 20% slimmer and slightly shorter than the full sized handle.
Note - These Small/Slim handle knives are not sold separately.
This sent includes the followingt 2 knives
1 3/8'' Detail Knife
1'' Chip Carving Knife
Thor Super Plastic Masons Maul
1000 Grade Ultra-High Molecular Weight Polythene Heads with wooden handles.
High impact with strength, durability and abrasive resistance.
Specifically designed for stone masonry.
Available in 3 sizes: 4'', 5'' and 6'' diameter round heads - all measuring approximately 240mm (9.5'') in total length
Blue Spruce Card Scraper Set
If you’ve struggled to sharpen and use traditional, thin card scrapers, you’re going to love the Blue Spruce Toolworks' new card scrapers. Even if you’re a master with traditional card scrapers, you’ll still appreciate the unique features they bring to the table.
Blue Spruce card scrapers are nearly twice as thick as most others on the market. The thicker blade won’t...
Benchcrafted Benchmakers Hardware
Typical captive nut arrangements for knockdown bases involve either a square nut, recessed hex nut, or short, slotted cross-dowels. All of these fasteners make it tricky to assemble the joint without some frustration or extra tools.
The BenchCrafted barrel nuts and end cap barrel nuts are the ideal choise for making knock-down joints in workbench bases.
The set of 4 zinc-plated steel Barrel Nuts are...
Benchcrafted Tail Vice (Wagon Vice) Kit - Machined
Clamping work to a bench surface between dogs is a very old technique. The historical record gives us examples as far back as the Roman era, but most woodworkers know the tail vice from the modern Scandanavian and German tradition. The oldest detailed drawings we have are from the early 16th century by German author Martin Löffelholz.
The Benchcrafted tail vice uses a pair of either wooden or metal...
Curved Replacement Blade for Veritas Dowel & Tenon Cutters
The curved blade is a replacement blade for the Veritas Dowel and Tenon Cutters. It can also be used on the 3/8", 7/16" and 1/2" Veritas Tapered Tenon Cutters (not recommended for the larger sizes as overheating may occur).
Gyokucho Blade for Kataba Proton Power Saw 240mm (400 & 400T)
Replacement for the Gyokucho #400 and 400T saws