Sort By
Per Page
View
Grid
List
Pfeil Back Bent Gouges Series 10
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
ProEdge Woodturners Accessory Kit
The main jigs and belts required for sharpening woodturning gouges and chisels.
The Robert Sorby ProEdge Woodturners Sharpening Accessory Kit includes......
ProSet Bevel Angle Guide
Fingernail Profile Kit
Skew Jig
Standard Gouge Jig
Ceramic Belt 60 grit - x1
Ceramic Belt 120 grit - x1
Robert Sorby Standard Skew Chisels
Robert Sorby standard skew chisels are rectangular in section, giving this type of of skew more weight. This makes them superb for large spindle work e.g kitchen table legs and newel posts.
Saburrtooth 1/8'' Long Ball Nose - 1/8'' x 1 1/4''
Saburrtooth 1/8" long ball nose available in fine and coarse.
Head Diameter: 1/8"
Head Length: 1¼"
Veritas Bar Gauge 12'' Extension Rods
This pair of 12'' extension rods can be used to extend the reach of the Veritas bar gauge, Veritas beam compass, or Veritas marking and transfer tool.
It can also be used with the fence and centre kit for the Veritas plunge base for rotary tools or the fence and centre kit for compact routers, in order to extend the reach of the fence. The rods have a male thread at one end and a female...
Veritas Centre Marker
The Veritas centre marker is used for marking the centre of any square or round piece up to 6" across.
Ideal for marking work removed from a lathe after waste ends have been removed. This accurate centre marker is a precision aluminium die casting with a steel scoring blade.
Easy to use, set the material in the marker, tap it and rotate a quarter turn and tap again, the result is two scoring...
Veritas Chair Devils
Veritas Chair devils are wonderful tools for final shaping and smoothing of round parts such as chair spindles and posts. The specially shaped scraper blade rounds the workpiece, removing any spokeshave marks.
• Machined steel bodies fitted with hardwood handles
• Machined toe and two thumbscrews are solid brass
• High-carbon steel blades are 0.040'' thick, hardened...
Henry Taylor Large Slipstone
One of 2 slipstones made by Henry Taylor, this one measures 115 x 45mm and tapers from 11mm to 4mm in thickness.
Abranet Dust Extraction Block
The 70mm x 125mm sanding block with hook and loop backing for quick attachment.
4 metre extraction hose available separately.
Kutzall 1/4'' Ball Nose Burr - 3/4'' x 1-1/8''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Crown Tools Bowl Gouge
A bowl gouge is the perfect tool for roughing down bowl and platter blanks as well as shaping and hollowing to a good finish.
These tools are made by milling a U shaped flute in a round bar. The width (a little confusingly) is the width of the flute, rather than the diameter of the bar.
The larger gouges are ideal for roughing down blanks and reaching into large bowls. The 1/4" (6mm) is...
Flexcut Double Sided Paddle Strop PW16
Flexcut Double Sided Paddle Strop has an 10' by 3' stroppping surface on both sides. The rough leather surface is used in conjunction with the Flexcut Polishing Compound (included), the fine side is a smooth leather surface for final finishing. Ideal for larger tools / blades.
Silky F180 Folding Saw - 180mm blade
The Silky F180 folding saw is a lightweight folding pocket saw aimed mainly at the light pruning and gardening market.
The blade is 180mm long with a large tooth configuration of 7.5 teeth per 30mm. The blade locks in two positions to allow flush cuts.
The Sheffield Axe with Leather Sheath
The new Sheffield made axe from Wood Tools. After a break of 30 years Sheffield is making axes again and they are better than ever before.
The head is forged from 100Cr6 bearing steel hardened and tempered to Rc58. It’s ground on one of the few last traditional water cooled grindstones still working and honed to a razor edge you can literally shave with.
The handle is made from locally...
David Barron Dovetail Kit Bundle
A David Barron inspired dovetailing bundle!
The Japanese pullsaw that David demonstrated with, the ever popular Gyokucho Razorsaw Dozuki 240mm Rip Saw
3 David Barron Guides - 1:6 and 1:8 dovetail guides plus the 90 degree guide.
The Knew Concepts 5'' fret saw with lever tension and swivel blade complete with a dozen Pegas #7 tooth blades (15tpi) as recommended by David.
...
Robert Sorby Bedan Parting Tool
The Robert Sorby bedan parting tool is used in the same way as the beading and parting tool the relieved side bevel allows the tool to plunge cut in bowls and boxes with little risk of binding.
3/8" Bedan Parting Tool - 18¾" with handle.
Auriou 4 in 1 Rasp
Flat on one side, convex on the other, with two stitches (grain 7 & 9). Use the finer stitch across the grain and the coarser stitch with grain when speed and close dexterity are needed. Useful for stickmakers and knife handle makers.
Replacement Blade for Nakaya Universal Dozuki Saw
Replacement blade for the Universal Dozuki Saw.
This saw combines both rip and cross cut on one cutting edge
J-WDU245 spacing 1.5 mm (finer)
J-WDU248 spacing 1.8 mm (coarser)
Flexcut No.8 Sweep Gouges
The Flexcut No.8 Sweep Gouges are interchangeable blades with a medium curved cutting edge. These unhandled gouges are compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Available Widths:
1/4" (6mm) SK428
3/8" (10mm) SK402
11/16" (17mm) SK702
7/8"...
Gyokucho Blade for Dozuki 240mm Rip (372 & 375)
Replacement for the Gyokucho #372 and 375 saws
Veritas Bevel-Up Jointer Fence
The Veritas low-angle jointer fence enables you to shoot consistent and accurate square or bevelled edges with your Veritas bevel-up jointer. The 11" long anodized aluminium fence can be attached to either side of the plane with the brass thumbscrews provided; a set screw can be adjusted to square the fence to the sole.
As supplied, the 2" tall guiding face can be used to plane edges perfectly...
Small Blade Adapter for Lie-Nielsen Large Router Planes
This adaptor enables you to use the specialty blades for the Small Router Planes in the Large Router Planes.
Veritas Jointer Fence
Planing a square edge on a board requires a jointer fence, whether you are using an electric jointer or a hand plane.
The Veritas® jointer fence allows you to shoot accurate and consistent square or bevelled edges with most* iron or steel bench planes. The integral rare-earth magnets make it quick and easy to attach or remove the 11" long anodized aluminium fence from either side of all...
Stanley 66 Replacement Irons
This replacement cutters fit the Stanley No.66 hand beader. Set of 8, as per original pattern.
These replacement irons are made of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C and will have edge keeping qualities equal to the originals.
Veritas Special Bench Bolts
Most European benches use a bolt system to fasten leg sets to stretchers. The main advantage is that you can snug the bolts if anything loosens due to changes in humidity.
The solid brass nuts on our bench bolts slide into a pre-drilled hole in the stretcher, and distribute pressure to prevent breakout. A bench can be made very rigid (without complex joinery) by using a wide stretcher, since the...
Auriou Rasp Bundle
A bundle of the 3 most popular rasps from Auriou
Cabinet Rasp 10'' Grain 9
Modeller Rasp 7'' Grain 13
Rat Tail Rasp 6'' Grain 13
Veritas Blade Storage Box
This blade box holds the blades for the combination plane or small plow plane, displaying them edge up so you can easily pick the one you need. Made of Baltic birch plywood, it holds blades side by side in two 6" long rows. Because the width of the blades determines how many fit in the box, the number of blades you can store depends on which blades you own. However, all the new blades for the combination...
Flexcut Micro-Palm Set FR804
This Flexcut set has been designed for extreme detail used in netsuke or caricature carving. These tools have their edges forged down even thinner than our other palm tools. Cutting with these fine edges allows the carver to work extremely close to adjacent detail without crushing wood fibers that can lead to 'chipping out.'
Palm Tools included: FR802 #5 x 2.5 mm, FR800 #9 x 1mm, FR801 #9 x...
Robert Sorby Boxed Set of 5 Traditional Bevel Edged Chisels
Set of 5 Robert Sorby Traditional "carver" style chisels with boxwood handle, brass ferule and leather washer in a cardboard presentation box.
Includes 1/4'', 3/8'', 1/2'', 3/4'' and 1'' chisels
Overall Size 265 - 340mm
Blade Length 127-178mm
Blades for the Veritas Detail Palm Planes
Replacement blades for the Veritas detail palm planes. (Convex and double-convex planes use the same blade.)
Blue Spruce Router Plane
Whether you rely on hand tools or prefer machinery, there are times when a joint needs just a slight adjustment. Machines struggle with removing a ''little bit'', and even many hand tools fall short. That’s where a router plane shines.
The Blue Spruce engineering team studied router planes from the late 1800s to today, designing a tool that appeals to both dedicated hand-tool...
Pair of Mounting Knobs for Veritas Universal Variable Angle Fence
A pair of stainless-steel knobs for mounting the Veritas universal variable angle plane fence to the bevel-up jointer, jack rabbet and shooting planes.
Made in Canada.
Pfeil Violin Maker's Gouge
Pfeil Violin Maker's Gouges are made of high-alloy carbon steel, the blades are razor sharp, and are ready to use.
Plum handles with brass ferrules. With a bent blade for shaping the tops and backs of stringed instruments, they are forged in one piece and have an inside bevel..
Replacement Tip for Veritas Japanese Style Awls
The replacement tip for the Veritas Japanese-Style Awls is A2 steel hardened to Rc60-62 for toughness.
Saburrtooth 1/8'' Sphere - 1/4'' x 1/4''
Head Diameter: 1/4"
Head Length: 1/4"
Tormek Wide Centreing Knife Jig
This well balanced, patented jig provides extra stability when sharpening knives with long, flexible blades such as fillet knives. With the KJ-140 Wide Centreing Knife Jig, you achieve a symmetrical grind with the same angle on both sides of the blade. Regardless of the thickness and geometry of the blade, it will self centre in the jig, giving you the same result on both bevels. The longer clamp stabilises...
Veritas Miniature Right-Hand Shooting Plane & Board
A perfect match of minature tools.
Veritas Miniature Right-Hand Shooting Plane
Only 5 5/16" long with a 3/4" wide blade, this is a fully functional 1:3-scale version of the veritas right-hand shooting plane. A superb tool for precisely trimming smaller stock to length, it is useful for anything from picture framing to kumiko and similarly fine work.
The body is made of stainless...
Clifton 770 Bull Nose Plane
The Clifton 770 Bull Nose plane is made to the exacting specifications as all the other Clifton planes.
The 770 fulfills the need for a straight-forward bull nose plane enabling the user to plane close to an abutting section of wood and avoiding tear-out.
It is a lightweight plane often used for cutting rebate stop shoulders. The cutting iron fits smoothly onto the machined pad in the body and...
Pfeil Small Straight Drawknife
Pfeil Small straight drawknife with cherry handles.
Overall length 310mm with a cutting edge of 120mm.
Gyokucho Fugaku Folding Kataba Super Hard 240mm
Full Name : Gyokucho Razorsaw Fugaka Folding Kataba.
Blade Length : 240mm.
Overall Length : 540mm open / 290mm closed.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : 1.9mm / 13.4
Blade Thickness : 0.6mm.
Teeth Pattern : Crosscut.
Gyokucho Product Number : 112.
Weight : 300g
Replacement Blade : S112
Pretty much the same as the standard range of saws, but these fold which means...
Benchcrafted Glide Leg Vice Base Hardware - Machined
The Benchcrafted Glide makes holding your work quick, easy, and pleasurable. It uses a clever combination of components to deliver incredible clamping force with minimal effort.
Traditional leg vices use a sliding ''tommy bar'' to operate the vice. This style of handle offers one distinct advantage: lots of leverage. These guys have engineered the Glide to deliver rock-solid workholding...
Kutzall 1/8'' Dovetail Burr - 3/8'' x 1/2''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
The Decorating Elf - Bud Cutter
The bud cutter is an optional extra for The Decorating Elf.
The Decorating Elf is the most versatile texturing tool available and so simple to use.
Designed by William Hudson (USA), known to his friends as the "Turning Elf". Ideal for decorating pens, boxes, finials, bowls, jewellery, Christmas decorations, toys, key rings, pepper & salt mills and lots, lots more.
Cuts wood - side and end...
Replacement Blade for Nakaya Kataba 250mm Folding Saw
Blade 0.5mm thick
Spacing 1.36mm for cross cut
African Walnut Turning Blanks
This species is part of the Meliaceae family and is closely related to African Mahogany with which it shares many similar characteristics to including weight, strength and stability.
Planed All Round (PAR) Turning blanks - kiln dried and grade A.
Gloforce 270mm Gooseneck Extension
This Glofroce 270mm Gooseneck extension is ideal for getting the Eye-Light into even further reaches and awkward positions.
It can be used with the Eye-Light Pro, Suction Cup or MagFoot and comes with a female 1/4' UNC thread on one side and a male 1/4' UNC thread on the other.
Veritas Scraper Shave
The Veritas Scraper Shave is a versatile small scraper suitable for small-scale work, fine detailing, or any application where a normal scraping plane would be too large.
The design of the tool allows a controlled scraping action that effectively smoothes the workpiece. Can be used as a companion tool with the chair devils for smoothing of non-round chair parts such as crest rails, arm bows and...
Clifton 550 10'' Concave Spokeshave
Clifton Spokeshaves are made from virtually unbreakable spheridal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the Spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The firm seating and fine adjustment allow the woodworker to make delicate nuances in the weight of cut.
Available...