Sort By
Per Page
View
Grid
List
Veritas Imperial Rule for Sliding Square
These Imperial rules for the Veritas sliding squares are interchangeable.
Boggs Concave Spokeshave
The Boggs Concave Spokeshave is a collaboration between Kentucky Master Chair Maker Brian Boggs and Lie-Nielsen Toolworks. A 2-5/8" diameter sole makes this tool the right choice for working chair spindles and other round parts.
Weight 8 oz. Body is 9-5/8" long, A-2 blade 1-1/8" x 1/8" thick, Bronze body and cap. Hickory handles.
Hamlet Rolled Edge Skew Chisels
A combination of flat skew and rolled edge for steadiness on the tool rest without fear of drag.
Lie-Nielsen No. 212 Small Iron Scraping Plane
Please note that this is the iron version, the bronze version is temporarily unavailable.
Scraping Planes are used for finishing woods that do not yield well to the hand plane. A scraping plane is more comfortable to use than a hand scraper, and a plane body helps you keep the surface you are scraping flat.
They can be tricky to master, however. To make it easier, Lie-Nielsen do not recommend...
Pfeil Back Bent Gouges Series 30
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Blue Spruce 6'' Straight Card Scraper
If you’ve struggled to sharpen and use traditional, thin card scrapers, you’re going to love the Blue Spruce Toolworks' new card scrapers. Even if you’re a master with traditional card scrapers, you’ll still appreciate the unique features they bring to the table.
Blue Spruce card scrapers are nearly twice as thick as most others on the market. The thicker blade won’t...
Pfeil Spoon Knives - Large
Pfeil Spoon Knives are used for hollowing out spoons and similar concave forms.
Blades are hardened and come with an oiled octagonal ash handle.
Blade length 45mm
Overall length 180mm
Series 23 Round large, bevel left; typically suited for a right handed person pulling the knife towards themselves. Or a left handed person pushing the knife away.
Series 24 Round large, bevel right; typically...
Replacement Blade for Veritas Power Tenon Cutters
This replacement blade is for Veritas Power Tenon Cutters and it fits all sizes.
The Sheffield Axe with Leather Sheath
The new Sheffield made axe from Wood Tools. After a break of 30 years Sheffield is making axes again and they are better than ever before.
The head is forged from 100Cr6 bearing steel hardened and tempered to Rc58. It’s ground on one of the few last traditional water cooled grindstones still working and honed to a razor edge you can literally shave with.
The handle is made from locally...
Another Work is Possible
By: Joshua A. Klein with Charpentiers Sans Frontières
Since 2002, Charpentiers Sans Frontières (CSF, 'Carpenters Without Borders') have travelled around the world to build, using the old ways. With axe, saw, plumb bob, and chisel, this diverse group of skilled craftspeople restored a medieval bridge at a castle in France, built a new hewn-truss roof system on a blacksmith shop...
Robert Sorby Spindlemaster - 812H
The spindlemaster will create beads & coves as well as planing and trimming end grain.
Taming the skew is perhaps the most common of problems encountered by the woodturner. The digs-ins which ensue from incorrect presentation cause many turners to avoid using the skew chisels and consequently reduce their skills and limit their opportunities of turning between centres. The new Spindlemaster...
Flexcut Beginner Palm & Knife Set KN600
The Flexcut beginner palm and knife set is a great way to get started in this rewarding craft. It includes the most popular palm tools and knives from the Flexcut range.
Each tool is supplied razor sharp and ready for use. Set includes: KN12 Cutting Knife, KN13 Detail Knife, FR307 V-Tool and FR306 Gouge.
Woodpeckers Micro Double Square
Woodpeckers new Micro-Squares go where other squares just can't fitting in the narrow openings of your precision joinery. The small double square includes two blades, one 1/2'' wide, and one 1/4'' wide.
The 1/4'' is ideal for checking the cheeks of tiny dovetail sockets and the walls of mortices. The 1/2'' blade handles the more general work such as layout, machinery...
Lie-Nielsen No.40B Butt Mortice Plane
The Butt Mortice is a simple to use plane that produces precise mortices of uniform depths with sharp, square corners.
The body is cast iron with a bronze blade cap, and the handles are polished cherry. The sole has a long slot that gives a clear view of your work and allows for quick removal of shavings. The plane measures 9 3/4" x 1", with a 3/4" wide blade.
Starrett Electronic Digital Caliper
The Starrett EC799 Series Electronic Caliper is light, comfortable, easy-to-use, and constructed with features that have made Starrett slide calipers the machinist's first choice for many years. The EC799 offers a slim, streamlined profile, a large, clear, easy-to-read LCD display, long battery life, and function buttons for zero and inch/mm. Electronic Caliper, 0-6" (0-150mm), w/o Output, w/Plastic...
.png "Last Ones!")
Bessey Horizontal Toggle Clamp with Open Arm and Horizontal Base Plate
In the clamped position‚ the lever is horizontal.
Automatic and infinitely variable adjustment of the clamping height 0 - 65 mm (2 ½ In.) while clamping force remains unchanged - without having to make manual changes to the position of the pressure screws.
Clamping force is variable up to 2‚500 N (550 lbs) depending on the adjustment of the set screw in the cantilevered joint.
Sturdy‚...
Crucible Dividers - Type 2
The Crucible Dividers, Type 2, allow you to quickly adjust the tips with one hand and easily lock in an important setting with a common No. 8 screwdriver. Made from alloy steel in the United States, these dividers are designed especially for woodworking - chairs, dovetails, shelving and other furniture-scale tasks.
Why are they called Type 2 dividers? The first-generation dividers were excellent,...
Rob Cosman Shawn Shim Dovetail Offset Tool 3/4
This is the smaller of the two Shawn Shims that Rob offers.
One of the most difficult tasks in hand cutting dovetails is accurately transferring the tails and precisely sawing the pins. Rob's improved method of transferring tails to the pin board by offsetting the tailboard by the thickness of the saw kerf takes all the guess work out of where to saw.
Offsetting by the exact thickness can...
Brown Ivory
Brown Ivory is red brown with a faint pink tinge with occasional blackish streak. Irresistible! For turning and furniture.
Tite-Mark Scoring Blade
Tite-Mark scoring blade for deep marking, slicing veneer strips and other general scoring tasks for the Tite-Mark Standard and Long Marking Gauges
Veritas Combination Plane Rabbet Blade - 1 1/16'
Will only work with the Veritas combination plane. 1-1/16" wide PM-V11 rabbeting blade lets you cut rabbets up to 1". 35° bevel angle
Replacement 1/4' Blade for Veritas Small Router
Veritas Replacement 1/4" wide high-carbon steel blade for the .
Made in Canada.
Lettercarving in Wood:
A Practical Course
A Practical Course
By Chris Pye
Letters are everywhere and lettercarving in wood is a tremendously useful skill for a carver to have: from memorials to signing work; from decorating bowls to house signs.
This book from internationally renowned woodcarving instructor Chris Pye will teach you fundamental lettercarving skills with which to artfully add words or text to an otherwise plain piece of wood.
For beginners,...
Veritas Chipbreakers (Cap Iron) for Vintage Planes
A cap iron serves to stiffen a plane blade, helping to dampen vibration and reduce the potential for blade chatter.
Made of corrosion-resistant A2 steel, our 1/8'' (3.17mm) thick cap irons are sized to fit Stanley and Record planes. The leading edge of the cap iron is machined with a relief angle to ensure it always contacts the face of the blade, so no gap can form.
Made in Canada.
Please...
Blue Spruce Router Plane
Whether you rely on hand tools or prefer machinery, there are times when a joint needs just a slight adjustment. Machines struggle with removing a ''little bit'', and even many hand tools fall short. That’s where a router plane shines.
The Blue Spruce engineering team studied router planes from the late 1800s to today, designing a tool that appeals to both dedicated hand-tool...
Saburrtooth 1/8'' Flame - 1/4'' x 1/2''
Flame burr available in extra fine, fine and coarse.
Head Diameter: 1/4"
Head Length: 1/2"
Veritas Miniature Bench Plane
This 1/3 scale version of the Veritas small bevel-up smooth plane is only 3½" long and 13/16" wide.
Fully functional, it has a 5/8" wide A2 blade (0.06" thick) with a 25° bevel angle that, together with the 13° bed angle, provides an effective cutting angle of 38°. The stainless-steel Norris-style adjuster lets you set the blade with precision.
The body is made from investment-cast stainless...
Proxxon Cordless Drill Set
Complete with lithium-ion battery, charger and case.
Kutzall 1/4'' Ball Nose Burr - 3/4'' x 1-1/8''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Crown Tools Bowl Gouge
A bowl gouge is the perfect tool for roughing down bowl and platter blanks as well as shaping and hollowing to a good finish.
These tools are made by milling a U shaped flute in a round bar. The width (a little confusingly) is the width of the flute, rather than the diameter of the bar.
The larger gouges are ideal for roughing down blanks and reaching into large bowls. The 1/4" (6mm) is...
Kutzall 1/8'' Cylinder Burr - 1/8'' x 7/8''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Veritas Technical Fence
This variable-angle fence enhances the versatility of your Veritas plane by making it easy to accurately and consistently plane any angle from 45° to 135°.
Knurled stainless-steel knobs mount it to any of the Veritas planes that have threaded holes: the low-angle jack, custom bench, bevel-up jointer, shooting and jack rabbet planes. Adjustment is straightforward – simply loosen the...
Henry Taylor No.11 Fishtail Gouges
This range is being discontinued by the supplier, only available while we have stock.
From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules.
A copy of the Henry Taylor sizing...
Red Rose Reproductions Dividers
These dividers were designed with a few key objectives in mind. First, they needed to have the ability to be quickly adjusted. Many dividers are fitted with thumb screws used to open and close the arms. This method is fine for some tasks, but falls short when rapid adjustments are needed, such as when using with the sector where adjustments are frequent and over a large range. These are fitted...
Henry Taylor Incannel Firmer Gouges Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F11 - 1/4" (6mm)
F12 - 3/8"...
Henry Taylor No.7 Long Bent Gouge - 1 1/2'' (38mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Silky Pocket Boy Medium Teeth Folding Saw - 130mm or 170mm blade
The Silky Saws Pocketboy range of folding saws is an extremely popular, high quality gardening and leisure product. Its compact, lightweight design meaning it fits neatly into your pocket or rucksack. Ideal for light pruning around the garden, including fruit and small ornamental trees. It is also popular with campers and those enjoying the great outdoors.
Gyokucho Blade for Ryoba 240mm (610 & 661)
Replacement for the Gyokucho #610 and 661 saws
Quercus Magazine - July/August 2021
QM07 July/August 2021
Sharpening and workbench design are key features of the July/August issue of Quercus. Richard Wile offers tips on setting up a stone station for quicker, better sharpening and honing of chisels and plane irons. John Lloyd shows how to sharpen a carving gouge with ‘in-cannel- bevel, while Sean Hellman saves time and pennies by mending a broken bandsaw blade. Then there...
Pfeil Medium Sized Tools - Set of 18
Pfeil Medium Sized Tools - Set of 18 comes in a beechwood box and includes:
1 x Straight Chisel: 8mm (D1-8);
1 x Skew Chisel: 8mm (D1S-8);
12 x Gouges:
Series 2 - 12mm (D2-12),
Series 5 - 3mm (D5-3) & 8mm (D5-8) & 12mm (D5-12),
Series 7 - 4mm (D7-4) & 14mm (D7-14),
Series 8 - 7mm (D8-7) & 10mm (D8-10),
Series 9 - 5mm (D9-5) & 10mm (D9-10),
Series 11 - 1mm (D11-1) &3mm...
Tormek DE-250 Diamond Wheel Extra Fine 1200G
The Tormek Diamond Wheel Extra Fine with a grit size of 1200 leaves an extra fine finish and is especially suitable for carving tools and knives when the need for steel removal is minimal.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter.
Included with every diamond wheel is a bottle of Tormek...
Tormek LA-120 Jig Shaft
Replacement shaft for the LA-120 Profiled Honing Wheel
Auriou Standard Stonecarving Gouges Series 7
Auriou stone carving chisels from this standard range have straight octagonal bodies. These are perfect for working soft stone and marble.
Flat and rondelle chisels are used for smoothing out the texture left by the tooth chisel and prepares the stone for finishing. Any stone bruises left by the point or tooth chisels can be removed with a flat chisel or a riffler file.
Hock 3 1/2'' Radius-Edge Krenov-Style Plane Assemblies
The Hock 3 1/2" Radius-Edge Krenov-Style Plane Assemblies are designed in collaboration with James Krenov's Fine-Woodworking studio in Fort Bragg USA. These blades are 3/16" thick and come in sizes ranging from 1 1/4" to 1 3/4", with a 30° bevel. Made from high carbon steel, they include a chip breaker and assembly screw.
Dimensions:
PR125: 4'' High Carbon...
Pfeil Spoon Knives - Half Round Small
Pfeil Spoon Knives are used for hollowing out spoons and similar concave forms.
Blades are hardened and come with an oiled octagonal ash handle.
Blade length 50mm
Overall length 165mm
Series 25 Half-round small, bevel left; typically suited for a right handed person pulling the knife towards themselves. Or a left handed person pushing the kinfe away.
Series 26 Half-round small, bevel right;...
Replacement Face - Thor Nylon Retail Hammer 370g
These replacements faces are for the Thor Retail Hammer 31-710R weight 370g
Available in Hard Yellow Nylon, White Nylon, Medium Hard Red Plastic, Tough Nrown Polyurethane and Soft Grey PVC
Faces are designed to wear and to be replaced by hand.
All faces are one piece moulded.
No metal pegs or inserts to damage the workpiece when worn.
Faces have a shoulder for extra strength and to prevent...
Saburrtooth 1/4''' Ball Nose - 1/2'' x 2''
The Saburrtooth 1/4" Ball Nose with a 1/2" diameter and 2" length is perfect for carving, shaping, and smoothing. It is available in multiple grits (X Fine, Fine, Coarse, X Coarse) and is designed for efficient material removal with minimal clogging. Ideal for woodworkers, it provides excellent control and precision for detailed tasks.
If grits are not displayed they are no longer...
Set of 9 Pfeil Punches for Wood in Wooden Block
These Pfeil Punches for wood are just great for creating background detail for your carvings.
The punches are made from steel and weigh 540g each.
Size 100mm x 100mm x 135mm