Sort By
Per Page
View
Grid
List
Ray Iles 1 5/8'' Modern Stanley Block Plane Blade
Designed for the modern Stanley 9½ Block Plane
Width: 1 5/8''
Length: 4 1/2''
High grade carbon steel hardened to 59 - 61 Rockwell C.
Clifton 650 Curved 10'' Spokeshave
Clifton Spokeshaves are made from virtually unbreakable spheridal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the Spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The firm seating and fine adjustment allow you the woodworker to make delicate nuances in the weight...
.png "Last Ones!")
Quercus Magazine - July/August 2021
QM07 July/August 2021
Sharpening and workbench design are key features of the July/August issue of Quercus. Richard Wile offers tips on setting up a stone station for quicker, better sharpening and honing of chisels and plane irons. John Lloyd shows how to sharpen a carving gouge with ‘in-cannel- bevel, while Sean Hellman saves time and pennies by mending a broken bandsaw blade. Then there...
Robert Sorby ProEdge Proset
Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset.
By placing the gouge into the clamp of the profile arm and then extending the gouge up-to the required stop and locking it into place will allow for precise and repeatable bevel angles to be obtained.
Carve
By Melanie Abrantes
Norwegian Wood meets How to Tie a Tie in this irresistible gift for DIY enthusiasts.
Using just a tool or two (a pocketknife and a gouge), readers will learn how to whittle 12 small objects, from a coffee spoon to a pair of dice, that take just a few hours to finishand in the process carve out a little peace and quiet for themselves.
Carve is an accessible guide to a...
Tormek LA-120 Jig Shaft
Replacement shaft for the LA-120 Profiled Honing Wheel
Blades for Veritas Apron Plane
Veritas 1 1/4" blade for the Veritas Apron Plane. Available in O1 or PM-V11 steel with a 25° bevel, or an A2 toothed blade at 38°.
Edge Toolworks Moxon Vice
A beautifully made, ready to go straight from the box (no assembly required) Moxon Vice. Made by Matthew Collins Furniture under their brand of 'Edge Toolworks'. Matt runs a successful workshop in Standlake, Oxfordshire which he set up in 1990, and has been a customer of Classic Hand Tools for as long as we can remember! Matt's team use these vices in their workshop and have done so...
Robert Sorby Tool Rest Stem
These stems work with the Robert Sorby Modular Tool Rest System.
Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish.
Stems are available in 1/2", 5/8", 3/4", 7/8", 1", 25mm, 28mm and 30mm diameters to fit most popular lathes.
Saburrtooth Flat Faced Shaping Wheel - 4'' Sanding Disc
Saburrtooth 4" flat faced shaping wheel.
Bore Size: 7/8"
If grits are not displayed they are no longer available.
The Workbench Book
by Scott Landis
First published in 1987, "The Workbench Book" by Scott Landis remains the most complete book on the most important tool in the woodworker’s shop.
"The Workbench Book" is a richly illustrated guided tour of the world’s best workbenches — from a traditional Shaker bench to the mass-produced Workmate. Author and workbench builder Scott Landis...
Veritas Miniature Bench Plane
This 1/3 scale version of the Veritas small bevel-up smooth plane is only 3½" long and 13/16" wide.
Fully functional, it has a 5/8" wide A2 blade (0.06" thick) with a 25° bevel angle that, together with the 13° bed angle, provides an effective cutting angle of 38°. The stainless-steel Norris-style adjuster lets you set the blade with precision.
The body is made from investment-cast stainless...
Veritas Thickness Calipers
Primarily used by turners, these Veritas thickness calipers can be fitted into virtually any shape of vase or bowl.
To use, open the caliper by just pulling the legs apart (having the spacing nut between the legs rather than outside them allows this), put in position and then set the spacing nut to the wall thickness. Open calipers, remove and measure tip gap.
The spacing nut can be adjusted...
Pfeil Spoon Knives - Large
Pfeil Spoon Knives are used for hollowing out spoons and similar concave forms.
Blades are hardened and come with an oiled octagonal ash handle.
Blade length 45mm
Overall length 180mm
Series 23 Round large, bevel left; typically suited for a right handed person pulling the knife towards themselves. Or a left handed person pushing the knife away.
Series 24 Round large, bevel right; typically...
Pfeil Razor Strop 1
Pfeil Honing Strops for the finest edges for all knives.
Birch base, faced with a fine calf leather.
Size 220 x 50 x 20mm
Veritas No.112 Style Scraping Plane
The Veritas® scraping plane is the ideal tool for final smoothing, especially when you have to deal with highly figured wood or reversing grain. With a well-sharpened blade and light cuts you can achieve excellent results on any wood. Tear-out is virtually eliminated with the cutting action of the included scraping blade. The adjustable frog enables blade angles from 0° to 25°, providing fine...
Another Work is Possible
By: Joshua A. Klein with Charpentiers Sans Frontières
Since 2002, Charpentiers Sans Frontières (CSF, 'Carpenters Without Borders') have travelled around the world to build, using the old ways. With axe, saw, plumb bob, and chisel, this diverse group of skilled craftspeople restored a medieval bridge at a castle in France, built a new hewn-truss roof system on a blacksmith shop...
Oscar Rush Side Axe - Right Grind
A hand forged, 130mm -135mm (5 1/4'') edge side axe. RIGHT grind.
The head weight is approximately 775g
Handle - 320mm long (just over 12'') hand carved, faceted, kiln dried ash handle.
The leather cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
The axe is belt sharpened (2000 grit) and then polished on a wheel...
Pfeil Series 21 - Dog Leg Chisels
Dog leg chisels are used for finishing rectangular depressions.
Robert Sorby Spindlemaster - 812H
The spindlemaster will create beads & coves as well as planing and trimming end grain.
Taming the skew is perhaps the most common of problems encountered by the woodturner. The digs-ins which ensue from incorrect presentation cause many turners to avoid using the skew chisels and consequently reduce their skills and limit their opportunities of turning between centres. The new Spindlemaster...
Pfeil Chip Carving Knife - Kerb 7
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 7 also known as Kerbmesser.
This knife is for whittling or chip carving. The blade is curved so it will carve the wood easily but it cannot be used to carve straight lines as you can with the Kerb 1 or Kerb pfeil.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 40mm
Ray Iles 1 3/8'' Modern Stanley Block Plane Blade
Designed for the modern Stanley 60½ Block Plane
Width: 1 3/8''
Length: 4 3/8''
High grade carbon steel hardened to 59 - 61 Rockwell C.
Lee Valley 3-in-1 Brass Marking Gauge
This elegant Lee Valley marking gauge is really three tools in one - a wheel gauge, a pin gauge, and a cutting gauge.
The unique swivelling pin/blade chuck takes either a pin or a blade that locks in place (after extension is set) using a set screw in the end of the 4½" gauge stem. The cutting blade can be set for either right or left handed use. The opposite end of the stem is tapped to accept...
Clifton 600 Flat 10'' Spokeshave
Clifton Spokeshaves are made from virtually unbreakable spheridal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the Spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The firm seating and fine adjustment allow you the woodworker to make delicate nuances in the weight...
Starrett Electronic Digital Caliper
The Starrett EC799 Series Electronic Caliper is light, comfortable, easy-to-use, and constructed with features that have made Starrett slide calipers the machinist's first choice for many years. The EC799 offers a slim, streamlined profile, a large, clear, easy-to-read LCD display, long battery life, and function buttons for zero and inch/mm. Electronic Caliper, 0-6" (0-150mm), w/o Output, w/Plastic...
Lie-Nielsen 55 Degree Frog
If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog.
Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch).
The higher pitches make smoothing difficult wood easier.
Rob Cosman Shawn Shim Dovetail Offset Tool 3/4
This is the smaller of the two Shawn Shims that Rob offers.
One of the most difficult tasks in hand cutting dovetails is accurately transferring the tails and precisely sawing the pins. Rob's improved method of transferring tails to the pin board by offsetting the tailboard by the thickness of the saw kerf takes all the guess work out of where to saw.
Offsetting by the exact thickness can...
Holster for Robert Sorby Timber Framer's Slick
A quality riveted leather holster for safer carriage of the Robert Sorby Timber Framer's Slick.
Pfeil Medium Sized Tools - Set of 18
Pfeil Medium Sized Tools - Set of 18 comes in a beechwood box and includes:
1 x Straight Chisel: 8mm (D1-8);
1 x Skew Chisel: 8mm (D1S-8);
12 x Gouges:
Series 2 - 12mm (D2-12),
Series 5 - 3mm (D5-3) & 8mm (D5-8) & 12mm (D5-12),
Series 7 - 4mm (D7-4) & 14mm (D7-14),
Series 8 - 7mm (D8-7) & 10mm (D8-10),
Series 9 - 5mm (D9-5) & 10mm (D9-10),
Series 11 - 1mm (D11-1) &3mm...
Grinling Gibbons Master Carver
by Paul Rabbitts
Master Carver Grinling Gibbons (1648–1721) is famous for his breathtakingly delicate, intricate and realistic carvings, both in wood and stone. Tantalising cascades of fruit and flowers, puffy-cheeked cherubs, crowds of figures and flourishes of architecture are all trademark features of his energetic, animated carvings that grace stately homes, palaces, churches and colleges...
Tormek DE-250 Diamond Wheel Extra Fine 1200G
The Tormek Diamond Wheel Extra Fine with a grit size of 1200 leaves an extra fine finish and is especially suitable for carving tools and knives when the need for steel removal is minimal.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter.
Included with every diamond wheel is a bottle of Tormek...
Joseph Marples Trial 1 - 10'' Mitre Square
The Joseph Marples Trial 1 Double Brass Faced Mitre Square is a tool based on designs that were last made over 70 years ago which were marked with the Trial 1 brand or corporate mark.
This high quality Mitre Square has a blade length of 10'' (250mm) which is made from chemically blacked spring steel.
This Mitre Square is made from either Walnut or Rosewood and has four brass diamond rivets...
Robert Sorby Framing Chisel Set
On of each of the ever popular RS285 Robert Sorby Framing Chisel in 1'', 1 1/2'' and 2''.
Overall Size:- 495mm
Blade Length:- 267mm
Saburrtooth 1/4''' Ball Nose - 1/2'' x 2''
The Saburrtooth 1/4" Ball Nose with a 1/2" diameter and 2" length is perfect for carving, shaping, and smoothing. It is available in multiple grits (X Fine, Fine, Coarse, X Coarse) and is designed for efficient material removal with minimal clogging. Ideal for woodworkers, it provides excellent control and precision for detailed tasks.
If grits are not displayed they are no longer...
Saburrtooth 1/8'' Flame - 1/4'' x 1/2''
Flame burr available in extra fine, fine and coarse.
Head Diameter: 1/4"
Head Length: 1/2"
Veritas Square Fence
A carpenter's square is frequently needed just because of its size. The key disadvantage of such a square (its lack of a supporting fence ledge) can now be eliminated using a Veritas square fence.
The 8" (200mm) long anodized aluminum extrusion can be readily attached to either the stock or blade of your square (depending upon intended use) with the two integral brass screws. The face of...
Warrington Pattern Hammer
Words from Christopher Schwarz......
''Small cross-peen hammers are incredibly useful in furniture making. We've used them in our work for more than 20 years.
Americans don’t have much of a history with this form of hammer. It’s a British thing, just like the lump hammer we make. We don’t know why that is the case because Warringtons are quite useful.
This small...
Hamlet Oval Skew Chisel
Finely balanced tool designed to allow the tool ease of movement along the tool rest producing a clean fine finish without the fear of tool rest damage.
Pfeil Large Curved Drawknife
Pfeil large curved drawknife with Cherry handles, and goatskin protector for blade.
430mm overall length, blade length 240mm, weight 450g.
Gently curved blade.
Clifton Adjustable Low Angle Block Plane
Adjustable Low Angle Block Plane - made in Sheffield, England
Made from bronze, this block plane aims to offer the ultimate in comfort and style aiming to fit your hand perfectly with it's high quality walnut handle, this block plane will allow you to shave the surface of your project with ease.
Made from a high quality bronze casting, in Sheffield UK, this is then finished with the new signature...
Hamlet Beading & Parting Tools
These beading and parting tools are used primarily for forming beads and spigots, these tools can also perform the standard parting tool tasks such as cutting through and forming shoulders.
Kutzall 1/8'' Cylinder Burr - 1/8'' x 7/8''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Veritas Jack Rebate Plane + PM-V11 Blade
This Veritas Jack Rebate plane cuts large-scale rebating down to size. The body is 385mm long and the blade extends the full width (57mm) of the body. It is suitable for very large rebates and fielded or bevelled panels. The long sole and substantial mass help ensure accuracy.
The 4.8mm thick bevel-up blade makes right or left-handed corner cuts cleanly and accurately. Adjustable scoring spurs...
Red Rose Reproductions Dividers
These dividers were designed with a few key objectives in mind. First, they needed to have the ability to be quickly adjusted. Many dividers are fitted with thumb screws used to open and close the arms. This method is fine for some tasks, but falls short when rapid adjustments are needed, such as when using with the sector where adjustments are frequent and over a large range. These are fitted...
Henry Taylor Incannel Firmer Gouges Set of 6
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F11 - 1/4" (6mm)
F12 - 3/8"...
Arbortech Industrial Pro Kit
- Fast, safe & controllable
- Will not bind or grab on tight curves - perfect for shaping & fast removal
- Extremely hard cutting edge & a resilient inner core for high speed work
- Blade hardened to 40 Rockwell C (can be sharpened with a chainsaw file or ceramic sharpening stone)
- Fits 100mm &115mm grinders
The Arbortech Industrial Woodcarver is a unique tungsten carbide tipped cutter...