Sort By
Per Page
View
Grid
List
Tite-Mark - Mortice Blades (pair)
Pair of Mortice Blades for laying out mortices for Tite-Mark Standard and Long Marking Gauges
Pfeil Chip Carving Knife - Kerb 13
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 13 also known as Schnitzmesser Gerade.
The use of a Kerb 13 is similar to the Kerb 12 but with a straight blade more for cutting shapes and angles on small objects. Not suitable for chip carving, because of the size of the blade.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Tite-Mark Fixed Width Mortice Blades
Fixed Width Mortice Blades for the Tite-Mark Standard and Long Marking Gauges; available in 1/4'' (6.35mm), 5/16'' (7.94mm), 3/8'' (9.52mm) and 1/2'' (12.7mm).
RH Preyda Axe Stones
The RH Preyda Axe Sharpening Stone was designed specifically for the axe enthusiast. Paired down size, wooden handle grip and Soft Arkansas and Hard Black Arkansas stones allow for ultimate precision when sharpening your blade.
Available in the following sizes:
4" x 1" x 1/4" (102mm x 25mm x 6mm)
- 13/16" (20mm) Overall Thickness
- 8" (203mm) Overall Length
6"...
Tormek DF-200 Diamond Wheel Fine 600G
The Tormek Diamond Wheel Fine with a grit size of 600 is the ultimate all round wheel combining efficient steel removal with smooth surface finish which makes it the perfect versatile wheel.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft.
Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate....
Tormek Planer/Jointer Blade Jig
With the Tormek Planer Blade Attachment SVH-320 you can sharpen HSS planer blades of any length. Also suitable for mitre guillotine blades.
With this jig you will always work with sharp planer blades. You do not need to interrupt your work to send them away for sharpening.
The jig copes with planer blades of any length. Blades longer than 270 mm (10½") are relocated in the blade holder and...
Tormek XB-100 Horizontal Base
The Tormek XB-100 Horizontal Base is an upgrade for earlier Tormek machine models. With the Horizontal Base you can move the Universal Support from vertical mount (for grinding towards the edge) to horizontal mount for grinding away from edge.
Auriou Small Offset Drawknife
Auriou have created a small offset drawknife that is 6" wide, curved blade 1" deep, with offset handles (these are above the plane of the cutting edge giving knuckle clearance). this would be more useful for smaller stock removal and delicate trimming.
Short 3¼" beech handles with brass ferrules.
Hand forged at Forge de Saint Juery, France, home of Auriou Toolworks.
Bad Axe 12'' Stiletto
The Bad Axe Stiletto is a dedicated dovetail saw. You might think you need a short 8'' dovetail saw to cut your finest pins, but actually the Stiletto at 12'' will make for longer (and therefore fewer) cuts, which promotes more accuracy. The extra length is balanced beautifully by a shallow blade so it feels right in the hand.
Bad Axe Tool Works takes the finest materials and pairs...
DMT Diafold Double Sided Sharpener Fine/Coarse
Offering two stage sharpening and a compact design, the Double Sided Diafold Sharpener is as strong as it is versatile. Two different grits are combined on this platform to create a lightweight sharpener that is great for the using on tools such as axes, knives, scissors & drawknives. Also useful for touching up smaller blades and cutters. Features a continuous surface that can be used for small...
Gyokucho Blade for Compact Dozuki 180mm Crosscut (297)
Replacement for the Gyokucho #297 saw
Gyokucho Blade for Compact Jushi 180mm Rip (295)
Replacement for the Gyokucho #295 saw
Henry Taylor Hand Adze Shallow Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes, this one a gouge end with a shallow/mid gouge or there is a tight gouge (sweep 9) and a 50mm (2") straight edge (like a chisel).
At the other end to the cutting edge is a square faced hammer poll.
All the adzes have an ash handle of 250mm (about 10") .
The overall head size (from the...
Hock 1' Chip Carver Knife
A traditional Chip Carving Knife is a short-bladed knife used to make triangular shaped cuts to create intricate designs in wood. Designs carved in this fashion are cut into the wood or incised, not relieved.
The length listed is an approximate blade length.
Handles are made from Jatoba with nothing more than an oil finish.
Lee Valley Spokeshave Roll
For some people, spokeshaves are like peanuts (or planes) - they can't have just one! This unique Lee Valley spokeshave tool roll (really a tri-fold case) keeps them all organized, accessible and portable.
Made from a heavy polyester fabric, the exterior of the roll is double-layered and padded. Sewn elastic straps hold six spokeshaves of lengths up to 12". The roll flaps fasten closed with hook-and-loop...
Oscar Rush Small Carving Axe
A small carving axe for all sizes of carving.
This stout hand forged carving axe has a 95mm - 100mm (4'') edge - SYMMETRICAL grind (also known as double grind).
The head weight is approximately 475 - 500g.
If striking the poll, do so with a wooden mallet (not a steel hammer).
The handle is hand carved by Oscar, 275mm - 285mm long (just over 11''), faceted, kiln dried ash...
Pfeil Series 17 - Staehli Gouges
The form gives two tools in one - a sharp radius at the base and sides swept like a No.2 gouge.
Ideal for lettercarving and ornamental work. Used for creating clean, sharp bottomed channels.
Robert Sorby SteadyPro Turning System
The Robert Sorby SteadyPro is a very easy to use jig that provides additional tool support when hollowing as well as many other woodturning operations.
The versatile SteadyPro fits a wide range of woodturning lathes by utilising the stems from the Robert Sorby modular tool rest system.
With the easy to adjust cantilever action of the clamping rollers, this ensures the optimum control for a large...
Saburrtooth 1/4'' Flame - 3/8'' x 3/4''
Head Diameter: 3/8"
Head Length: 3/4"
Saburrtooth 1/8'' Cylinder - 1/2'' x 1/2''- (Smooth End)
Saburrtooth 1/8" Cylinder smooth end available in fine, coarse and extra coarse.
Head Diameter: 1/2"
Head Length: 1/2"
If grits are not displayed they are no longer available.
Sterling Tool Works Roubo Curves
Roubo Curves® are metal french curves on "steroids", the largest curve in the three piece set is 18 inches long! This metal french curve set is scaled to a perfect size for full scale work.
The set is made from 304 Stainless Steel precision cut with a laser and tumbled in media to debur all the flash and give a nice matte finish that is easy on the eyes for layout work - No Glare.
This will be...
The Slojd Tradition with Jogge Sundqvist (DVD)
Learn some of the methods and techniques behind Slöjd, the self sufficient tradition from Sweden that emphasizes hand work and handicraft. Jögge Sundqvist walks you through the process of making a spatula and a cheese board from green wood. He also demonstrates different types of letter carving and decorative carving.
Jögge Sundqvist is a Swedish woodworker and carver who started learning knife...
Veritas Joiner's Knife
With a design that is both practical and elegant, this joinery knife is an adaptation of the popular Veritas carving knife.
Like their carving knife, it has a brass collet designed for use with standard disposable scalpel blades, holding the blade firmly and allowing quick, easy blade changes. The handle is turned from torrefied maple, with a contoured shape that permits a comfortable, controlled...
Veritas Small Crosscut Saw
Used for cutting across or perpendicular to the grain, the 16 tpi crosscut saw blade has teeth filed with alternating bevel angles so it severs rather than tears wood fibers; it tracks better and leaves a smoother finish than a rip-cut blade. The teeth are filed with 15° rake and bevel angles and have 0.003" of set per side.
Kutzall 1/4'' Ball Nose Burr - 1/4'' x 1-3/8''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Pfeil Series 18 - Schaller Gouges
This multi-use tool is ideal for roughing out sculptures.
The base of the cutting edge is formed like a No.11 deep gouge, for cutting curves and hollows.
The sides are formed like a No.3 gouge..
Veritas Cabinetmakers Trimming Plane
Commonly called a chisel plane, this 165mm long by 44mm wide plane has an exposed full width blade that lets you work up to adjacent surfaces. It excels at making paring cuts in places where a chisel would be awkward or impossible to use, making short work of cleaning up corners and joints inside carcasses. Because the blade can be set level with the sole, you can also trim plugs or small inlays...
Arbortech Power Chisel MKII
The Arbortech Power Chisel MkII is a 1,000W powered carving tool that enables you to carry out freehand detailed carving and controlled chiselling. Built around the latest Arbortech motor, it does everything a traditional mallet and chisel will do, only easier and faster.
The Arbortech Power Chisel is easy and safe to use. The chisel only engages and starts to move when pressed onto the timber;...
Abranet Dust Extraction Block Hose
4m extraction hose that will fit straight onto most vacuum cleaners.
Auriou Traditional Stonecarving Gouges Series 6
The Auriou Traditional Stonecarving Gouges Series 6 are meticulously crafted for exceptional performance in soft stone and marble carving. Available in a range of sizes from 8mm to 25mm, these gouges offer precise control and durability for various sculpting tasks. The traditional "fat" hexagonal barrel handle ensures comfort during extended use.
Sizes Available: 8mm, 10mm, 12mm, 16mm,...
Pfeil Chip Carving Knife - Kerb 5
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 5 also known as Schnitzhaken.
For one-handed carving on small objects, with this specialist shape you can reach deepened areas from above. Not made specifically for chip carving.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Pfeil Series 23 - Macaroni
The Pfeil Macaroni tool is two forms in one - the base is a straight chisel No 1 and the corners form a parting tool.
Auriou Stone Rifflers - Half Round / Triangular
Enhance your stone carving projects with the Auriou Stone Rifflers, designed with half-round and triangular profiles for versatile sculpting. Hand-stitched with a comfortable "fat" hexagonal barrel handle, these rifflers allow extended use without discomfort. Crafted with a coarser cut specifically for soft stone and marble, they offer precision and durability.
Lengths Available: 150mm,...
Henry Taylor Woodcarving Punch - Circle
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Pfeil Scorp Round
The Pfeil scorp round is a tool for hollowing out bowls, or sculpting the seat of chairs etc.
Cherry wood handle.
Forged from K720 steel, blade is 65mm in diameter.
Pfeil Series 24 - Fluteroni
This Pfeil Fluteroni is a tool with an assortment of radii. It is between a square sided macaroni tool and a deep gouge and is used for creating precise lines (flutes) on furniture, mouldings or panels as well as in lettercarving. Where precise detailing is required, fluteronis are very useful tools.
Square End Scrapers
The Square End Scrapers available from Classic Hand Tools are highly versatile tools designed primarily for finishing convex and flat-bottomed forms in woodturning. These scrapers are particularly useful for achieving smooth, clean surfaces on your projects. The square end can also be modified to specific shapes, such as a diamond point, to suit different tasks.
Key Features:
Versatility:...
Temple Tool Co. Little Demon Universal Dozuki
A small-sized Japanese Dozuki pull saw with Universal teeth. Fine crosscuts AND rip-cuts. Use for Dovetails, Kumiko, Tenon Shoulders, Tenon Cheeks, and any other fine crosscut or rip-cut needs. For soft and hard woods.
Blade Length 6'' (150mm)
Overall Length 15.2'' (385mm)
Universal TPI 25 TPI
Blade Thickness 0.012'' (0.3mm)
Kerf 0.02'' (0.5mm)
In...
Henry Taylor Registered Mortice Chisel Set of 5
Made in Sheffield, England for over 150 years.
Blade about 5½" long.
F23 - 1/4" (6mm)
F24a - 3/8" (9mm)
F24 - 1/2" (12mm)
F25 - 3/4" (19mm)
F26 - 1" (25mm)
Temple Tool Co. Ultra Fine Crosscut Dozuki 180mm
Mid-sized Dozuki Japanese pull saw. Ultra-fine Crosscut teeth. Our thinnest and finest crosscut saw. Use for Kumiko, small to medium tenon shoulders, dovetail shoulders, and other fine crosscut needs. For soft and hard woods.
Blade Length 7'' (180mm)
Overall Length16.3'' (415mm)
Crosscut Teeth 30 TPI
Blade Thickness 0.008'' (0.2mm)
Kerf 0.012'' (0.3mm)
In...
MoraKniv Woodcarving Kit
The Mora Woodcarving kit is the perfect gift.
Sweden in a box - literally. This woodcarving kit includes a classic woodcarving knife no 120 and a wooden Dala horse. It’s a given combination of two of Sweden’s most famous national symbols. The narrow and pointed knife blade is made of laminated steel, which gives it superior toughness and edge resilience. The barrel shaped handle made...
Narex Gimlets
Gimlets are used as a right-hand drill for small openings or as a pre-drilling tool to prepare openings for screws.
The Narex gimlets are made of tool carbon steel by traditional forging and subsequent grinding technique in the same way as it was done more than one hundred years ago. Special geometry of the edge enables self-cutting into the wood or other soft materials without using much force.
Veritas Small Bevel-Up Bench Plane + PM-V11 Blade
This Veritas low angle smoother is 225mm long, 59mm wide and weighs only 1.25kg. It is easier to handle than a full size smoother. Think of it lying somewhere between a large block plane and a full size smoother, then you’ll see just how useful this plane can be.
Like a full size version, it is useful for final finishing of surfaces, end-grain work and for shooting mitres. The ductile cast...
Pfeil Polishing Paste, Green
Pfeil Polishing Paste is a fine abrasive paste for polishing honed bevels. Ideal for use with a powered strop, the paste features a cooling property, to avoid heating of the blade. The paste can be used with a cloth.
Weight 900g
Flexcut #11 Interchangeable Gouges
The Flexcut No.9 Sweep Gouges are interchangeable blades with a steep curved cutting edge. These unhandled gouges are compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Available Widths:
1/16" (2mm) SK602
1/8" (3mm) SK309
3/16" (5mm) SK409
1/4"...
Preston Replacement Spokeshave iron
This Ray Iles replacement iron fits the Preston Adjustable Spokeshave.
Made from of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C.
Tite-Mark Extensions
A pair of extension rods to fit the Tite-Mark Standard. One 3" (7.62cm) and one 6" (15.24cm) extension rod may be used individually or joined together to extend the reach of the Titemark an extra 9" (22.86cm) by being screwed onto the blade end.
Flexcut Scraper Set SK121
These Flexcut scrapers are easy to use (even for children) and come ready to use.
There are 6 different profiles in the set. Once inserted into the handle any side can be used as a scraping edge.
In just a few strokes you can remove any uneven surface or finish from your work without the use of sandpaper. No airborne dust! The scrapers can remove rough areas e.g on hand or power carving or ripple...