Sort By
Per Page
View
Grid
List
Journeyman Handcrafts Canvas Tool Roll
Keep your carving tools protected and portable with this Journeyman Handcrafts tool roll made from heavy weight 16oz green cotton canvas.
Designed with 16oz cotton canvas, this pouch is made to last and will endure many years of hard use. It’s double stitched with a very strong bonded nylon thread which is water and rot resistant. Finished with veg tan drawstrings for longevity and wooden toggles...
Journeyman Handcrafts Wool Lined Tool Roll
Keep your carving tools protected and portable with this Journeyman Handcrafts tool roll made from a two colours of 8oz waxed cotton canvas giving a lovely contrast of colour when rolled up. The tool roll is lined with a cream wool to give added protection to your tools.
This tool roll is made to last and will endure many years of hard use. It’s double stitched with a very strong bonded nylon...
Knew Concepts 5'' Fret Saw with Screw Tension
The screw tension saw was the origin of the Knew Concepts Fret saw line. It is the economy model. It provides extremely precise blade tensioning simply by turning the knurled tension nut at the top of the frame.
Saws come with a dozen Pegas Skip #7 Tooth blades (15 TPI).
Leadwood
Leadwood is well suited to turning and carving. Dark brown heartwood with blackish streaks. Hard, heavy and durable. Sandpapers, varnishes and oils well to a high lustrous finish.
Lee Valley 3/4'' Dog Hole Bushings
These 3/4'' hardened steel bushings help you make an accurate dog-hole drilling guide using any 1 1/2'' thick board.
Knurling on the bushing provides a mechanical lock when installed in an appropriately sized hole (1'' for the 3/4'' bushing), and a projecting rim ensures that it rests perpendicular to the jig's surface.
Made in Canada.
Lee Valley Vice Rack Stop
This simple device from Lee Valley is designed to help prevent racking when clamping work at one side of a vice. Simply stack up as many of the 0.10" thick shims as you need to match the approximate thickness of your work, up to a total of 4", and insert it into the vice opposite the work being clamped.
For thicker work, you can add a piece of scrap wood to occupy the bulk of the space, and then...
Lee Valley Winding Sticks
Winding sticks are not new; woodworkers have been making them for years from scrap wood and using them to check the flatness of material. Placed at opposite ends of a board, they accentuate any twist (wind), making it easier to identify and correct. With the sticks in place, sight across their top edges. If the edges are parallel, the board is not twisted. Reposition and repeat to check the entire...
Leonhard Muller Brush-Hook (Billhook)
Leather wrapped handle. Rounded tip.
430mm overall (14")
260mm cutting edge (10")
Leonhard Muller Classic Carpenters Side Axe
Good quality side axes are very difficult to source. We are happy to offer this ash handled side axe which has a 13cm edge to its sharpened blade. The length overall is 38cm and weighs approximately 1.2kg.
Available as a left or right handed axe.
Made in Austria by Leonhard Muller & Sons who have been making edge tools for over 333 years (which makes Leonhard extremely old!) This side axe...
Leonhard Muller Froe
Supplied with a 400mm (16") ash handle this froe is from Muller's "Carpenter's" range of edge tools.
The blade length is 350mm (14")
Weight 1.5kg
Lie Nielsen Carbide Burnisher
Creating a burr on a scraper requires a hard, highly polished surface.
The Lie Nielsen Carbide Burnishers have a 4" polished solid Carbide shank held in a Cherry handle. A flared Brass bolster protects your fingers while burnishing.
Lie-Nielsen Carcass Saw with Cherry Handle
The Carcass Saw is used for precise cuts across the grain, cutting tenon shoulders, and defining the edges of a dado.
It has 14 points per inch, filed crosscut, for cutting quickly, yet accurately and smoothly.
Blade is .020" (.5mm) thick, with a .003" (.076mm) set.
Overall length, including handle, is 19" (48.26cm), with an overall height of 4-7/8" (12.38cm).
Usable blade dimensions are 14"...
Lie-Nielsen Honing Guide
The Lie-Nielsen version of the side clamping style of honing guide is solidly machined from Stainless Steel, with a Bronze bearing.
Their Honing Guide features removable jaws: it comes with a standard pair of jaws that fit most Lie-Nielsen blades, and additional jaws are available (sold separately) for Chisels 3/16" and under, tall jaws for Mortice Chisels, long jaws for very short blades and...
Lie-Nielsen Honing Guide Mortice Chisel Jaw Pair
The Lie-Nielsen Mortice Chisel Jaws fit all Lie-Nielsen Mortice Chisels, as well as their 1" Bevel Edge Chisel.
Lie-Nielsen Mortice Chisels
SPECIAL NOTE - MARCH 2025
Please have a look at our Friday Finds section as we currently currently have 2 pre-owned (but hardly used) sets that will save you a few well earned pounds!
Designed with cabinetmaking in mind, these well-balanced Mortise Chisels are ground with parallel sides and are thicker than they are wide to help keep them straight in the cut.
Made of A2 Tool Steel, hardened...
Lie-Nielsen No.1 Iron Smoothing Plane
The Lie-Nielsen No.1 Smoothing Plane in iron. This is based on the famous (and somewhat scarce) Stanley No.1. The size makes it more comparable to a block plane than a smoother but nonetheless this small bench plane is suitable for detail work.
5-1/2" (14cm) long
Blade is 1-3/16" (3cm) x .110" (2.79mm) thick.
Weight is 1.35 lbs. (612 grams)
Lie-Nielsen No.60 1/2 Block Plane
The Lie-Nielsen No. 60½ Block Plane is based on the legendary Stanley No. 60½. This low angle block plane from Lie-Nielsen is a superb little tool for any toolkit — ideal for trimming end grain, chamfering edges, and general fine-tuning.
Adjustable Mouth – The movable front shoe lets you open or close the mouth easily: fine for delicate finishing, wider for more aggressive...
Lie-Nielsen Tongue & Groove Plane - 1/2''
The Lie-Nielsen Tongue & Groove Plane (1/2") cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one-piece blade registers on the milled body casting, to ensure squareness and equal depth of cut on both sides. Since this is a heavy stock removal tool no depth adjuster is needed.
Made to centre on 1/2" stock, tongue...
Mastercarver 3 Piece Knife Set
Mastercarver® has improved the handle comfort of their popular 3 piece knife set. The naturally shaped hardwood handles will fit your hand better for superior grip and comfort. Perfect for right or left-handed use. The handles are lightly finished with natural Tung oil. Unlike ordinary varnish used on others, Tung oil prevents skin blistering and discomfort.
The blades are the 3 most popular...
MoraKniv 120 Sloyd Woodcarving Knife
The Mora 120 Sloyd woodcarving knife is the shorter of the two we carry. The thin (2.8mm thick by 60mm long) blade is made from carbon steel which is easier to sharpen, and will ultimately give you a better edge over the laminated blades. Comes sharp, ready to go to work. The handle is made from oiled birch which is barrell shaped to give good grip. The tang runs the full length of the handle which...
Muller French-Style Sculptors Adze
Again, these adzes are from Leonhard Muller's Carpenter's Hatchets range but they are based on the traditional French design where the head gradually flares from the poll. 3 sweep widths to chose from and all come with straight hickory handles.
Straight 450mm hickory handles (about 18")
Choice of 65mm, 60mm or 56mm wide medium sweep cutting edge.
Narex Richter Bevel Edge Chisels
Until recently we stocked the Narex 8116 range of bevel edge chisels which were popular amongst students and people starting out in woodworking. Most importantly the steel in the 8116 range was very good but in our opinion the balance and feel would sometimes let them down. I'm glad to say that this new premium range 8150 from Narex is a massive improvement upon the old chisels. Yes they are not...
New Veritas Micro-Adjust Wheel Marking Gauge
Veritas have refined and redesigned their ever popular wheel marking gauges. This new micro-adjust wheel marking gauge draws on two decades of manufacturing experience, with subtle improvements across the board.
The adjustment mechanism built into the stainless-steel rod is intuitive to use. After setting the approximate projection, you can fine-tune the position of the cutter within a range of...
Oscar Rush Large Bowl Adze
A hand forged 50mm diameter hand adze with elliptical sweep profile to the cutting edge.
The head weight is approximately 600g with a 230mm - 235mm long (just over 9''), hand carved, faceted, kiln dried ash handle.
The leather adze cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
This adze has been carefully designed for...
Oscar Rush Side Axe - Left Grind
A hand forged, 130mm - 135mm (5 1/4'') edge side axe. LEFT grind.
The head weight is approximately 775g.
Handle - 320mm long (just over 1'') hand carved, faceted, kiln dried ash handle.
The leather cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
This axe has been carefully designed as an all rounder rather...
Oscar Rush Side Axe - Right Grind
A hand forged, 130mm -135mm (5 1/4'') edge side axe. RIGHT grind.
The head weight is approximately 775g
Handle - 320mm long (just over 12'') hand carved, faceted, kiln dried ash handle.
The leather cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
The axe is belt sharpened (2000 grit) and then polished on a wheel...
Oscar Rush Small Bowl Adze
A hand forged 30mm diameter hand adze with a compound sweep profile to the cutting edge (more of a U profile).
The head weight is approximately 450g with a 210mm - 215mm long (just over 8'') hand carved, faceted, kiln dried ash handle.
The leather adze cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
This adze has been...
Parts and Accessories for Veritas String Inlay Tool System
Used much like a marking gauge, this inlay tool lets you accurately cut narrow grooves in a workpiece as well as neatly slice fine strings from a sheet of veneer. Its interchangeable blade system lets you quickly swap blades to suit the activity.
The hook-shaped blade is designed to cut grooves. Used in a sweeping push-pull motion, it has outlining spurs on one side of the blade to score the groove...
Pax Razor Saw
The Pax Razor Saw has a fine toothed blade with 40tpi and no set on the teeth so this gives a smooth finish to your work. it is suitable for precision work and very small areas of wood. As the teeth are so fine, it is perfect for those delicate areas, which need the best finish.
The saw has a brightly polished brass back and a Rosewood handle.
Blade length 6″, 42tpi.
Popular with model...
Pfeil - 25 Piece Carving Set
This large fully forged Pfeil 25 piece carving set is for challenging carving projects and contains the roll case, 80mm wooden mallet, 2 genuine Arkansas stones, honing oil, carving knife and 20 full size carving tools.
The tools included are:1/16, 1s/16, 2/20, 3/3, 3/12, 3/25, 5/35, 7/20, 8/7, 8/18, 8/25, 9/7, 8a/18, 9/15, 7L/25, 11/2, 11/10, 15/3, 12/10 and 14/8.
This in plain english means
16mm...
Pfeil - 8 Piece Carving Set
This Pfeil 8 piece carving set is a starter set containing 7 full size fully forged tools and one chip carving tool. It is supplied in a rugged canvas roll case and the tools are honed and sharpened ready for use.
The tools included are 1/12, 1s/12, 5/12, 4/20, 7/10, 9/4, 12/8 and KERB12.
This in plain English means a 12mm chisel,
12mm skew chisel,
Series 5 12mm gouge,
Series 4 20mm gouge,
Series...
Pfeil Chip Carving Knife - Kerb 1
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 1 also known as Rosenmesser.
A simple knife for chip carving with a straight blade. You can use it to carve patterns (geometric or simple flowers) as well as whittling.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 50mm
Pfeil Chip Carving Knife - Kerb 12
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 12 also known as Fuchmesser.
The most popular Pfeil knife for one-handed carving on small objects where the small piece of wood is held in one hand and the knife is used with the other hand. Compared to the Kerb 1 it has a curved blade which is not suitable for chip carving but which runs easily through the wood for rougher...
Pfeil Chip Carving Knife - Kerb 13
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 13 also known as Schnitzmesser Gerade.
The use of a Kerb 13 is similar to the Kerb 12 but with a straight blade more for cutting shapes and angles on small objects. Not suitable for chip carving, because of the size of the blade.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Pfeil Chip Carving Knife - Kerb 15
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 15 also known as Gebogen, 2 Schneiden.
This is a small knife to carve fine details on objects and figures. The curved blade cuts on both sides and has a pointy tip so it can be used in many ways. It is not suitable for chip carving.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length...
Pfeil Chip Carving Knife - Kerb 5
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 5 also known as Schnitzhaken.
For one-handed carving on small objects, with this specialist shape you can reach deepened areas from above. Not made specifically for chip carving.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Pfeil Chip Carving Knife - Kerb 7
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 7 also known as Kerbmesser.
This knife is for whittling or chip carving. The blade is curved so it will carve the wood easily but it cannot be used to carve straight lines as you can with the Kerb 1 or Kerb pfeil.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 40mm
Pfeil Chip Carving Knife - Kerb Pfeil
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb Pfeil also known as Kerbschnittmesser.
The most popular knife made for chip carving (definitely one of our best sellers!). The short pointy blade allows a good grip in the wood.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 36mm
Pfeil Lino & Block Cutting Tools - Sets of 6
Pfeil Lino & Block Cutter Tools - Sets
Pocket Stones
Used to create the finest edge on precision tools, delicate instruments, and die work. RH Preyda Arkansas files hold their shape while creating the finest, most uniform finish.
Recommended for outdoor enthusiasts in need of a sharp edge on fish hooks, arrows, and hunting knives. The pocket stone's compact size allows it to easily fit in your outerwear pocket, or pack inside your gear. Pocket...
Red Rose Reproductions Compass Attachment
Red Rose Reproductions dividers can now be converted to a compass for drawing arcs and circles using the compass attachment. To convert, one of the points is unscrewed from the dividers and replaced with the mounting bracket and screw. The second screw secures a wooden pencil in place. The attachment is universal, and will fit on either the 5" or 7½" divider. Two pencils are included,...
Red Rose Reproductions Dividers
These dividers were designed with a few key objectives in mind. First, they needed to have the ability to be quickly adjusted. Many dividers are fitted with thumb screws used to open and close the arms. This method is fine for some tasks, but falls short when rapid adjustments are needed, such as when using with the sector where adjustments are frequent and over a large range. These are fitted...
Relief Carving in Wood:
A Practical Introduction
A Practical Introduction
By Chris Pye
This is a unique book for woodcarvers. Master woodcarver Chris Pye digs deeply into the process of relief carving by pulling apart a single subject, clearly demonstrating how low and high relief carvings 'work' and how to go about carving them.
Follow this book step by step and you'll learn about the tools and how to handle them properly, and fundamental, transferable carving skills...
Replacement Blade for Tite-Mark Marking Gauge
Replacement Blade for Tite-Mark Standard and Long Marking Gauges.
Robert Sorby Diamond/Side Cut Scraper
The Robert Sorby diamond/side cut scraper can be used on square bottomed boxes the end profiles allows the tool to create a right angled juncture between side wall and bottom. The 85º angle at the end prevents the tool from cutting th eside wall and the bottom at the same time.
3/4" Diamond/Side Cut Scraper - 16" with handle.
Robert Sorby Fingernail Profile Spindle Gouge 1/2''
Robert Sorby fingernail profile spindle gouge are ideal for fine detailing on spindle work. The wing tips are ground back to reduce the danger of catching when working in confined areas.
1/2'' spindle gouge. 18 1/2'' in length overall.
Robert Sorby Relief Cutting Tool
The Robert Sorby Relief Cutting Tool enables the turner to produce a recess prior to threading.
Sack Ups Plane Sack - Jack Plane SU546
Protect your valuable planes with these impregnated sacks made by Sack Ups which inhibit rust corrosion. More effective than any smelly old sock.
Sack-Ups are Silicon treated to prevent rust and to wick moisture away from your valuable tools. They provide protection for your tools and prevent dings and scratches. Keeping your tools looking as new as they did the day that you bought them.
Available...
