Gransfors Bruk American Felling Axe 434Gransfors Bruk American Felling Axe 434
Back In Stock
Gransfors Bruk American Felling Axe 434
The Gränsfors American Felling Axe is a professional axe for those who want to work in the forest in the traditional way. The axe is ideal for felling very large trees, thanks to its long, broad edge of 11.5cm. The axe is forged to a curved bit, making it suitable for cutting into fresh, resinous wood such as spruce or pine. The heavy head and long handle also give considerable power to the cut....
£185.00 inc VAT
Gransfors Bruk Carpenter's Axe 465Gransfors Bruk Carpenter's Axe 465
Back In Stock
Gransfors Bruk Carpenter's Axe 465
These axes have a straight edge and thin blade with low angle of the bevel face, suited for work in dry wood. The forged inward curve from the heel to the lip of the head allows your hand to grip almost straight above the centre of the edge. This, and the long straight cutting edge, gives rigidity, stability, and control when cutting. Functions like a good heavy knife. The axe poll is ground and...
£142.00 inc VAT

Gransfors Bruk Hand Hatchet 413Gransfors Bruk Hand Hatchet 413
Back In Stock
Gransfors Bruk Hand Hatchet 413
The distinguishing feature of the Gränsfors Hand Hatchet is its short handle relative to the size of its head. It is extremely practical to carry in your rucksack on forest walks. The shape of the sheath, which covers the edge and the top part of the poll, also stops the axe head cutting into your rucksack. The Hand Hatchet makes an excellent scouting and camping axe. Despite its short handle, the...
£125.00 inc VAT
Gransfors Bruk Hunter's Axe 418Gransfors Bruk Hunter's Axe 418
Back In Stock
Gransfors Bruk Hunter's Axe 418
The Gransfors Bruk Hunter's Axe is specially made for hunters. The Poll is forged thinner than normal and gently rounded and burnished to a Flay Poll to be used when skinning an animal. It is also good for chopping wood as well as meat and bones. The grip of the handle has circular grooves which gives a steady grip even if your hands are wet or sticky. This axe has received, as the first and only...
£142.00 inc VAT

Gransfors Bruk Large Splitting Axe 445 - Long 31' HandleGransfors Bruk Large Splitting Axe 445 - Long 31' Handle
Back In Stock
Gransfors Bruk Large Splitting Axe 445 - Long 31' Handle
The same as the Gransfors Large Splitting Axe 442 but with a longer 31" hickory handle. Ideal for taller users or when more power is required. Danger: Always wear adequate clothing and protection for your face and eyes. The poll of this axe, like the poll on most axes, is definitely not designed for heavy pounding on a wedge. The axe has a 3" face and a 31" hickory handle and weighs just...
£159.00 inc VAT
Gransfors Bruk Small Forest Axe 420Gransfors Bruk Small Forest Axe 420
Back In Stock
Gransfors Bruk Small Forest Axe 420
Gransfors Bruks Small Forest Axe 420 is one of the most popular from the Gransfors Bruks range. The same size as the Hunters Axe but with a more traditional pattern and poll. The blade is thin. The handle is long enough to allow powerful chopping but not too long so it will fit into a rucksack, the back of a car or a boat. Practical for splitting small sticks for the fire or cutting small-diameter...

5

£135.00 inc VAT

Gransfors Bruk Small Hatchet 410Gransfors Bruk Small Hatchet 410
Back In Stock
Gransfors Bruk Small Hatchet 410
The Gransfors Bruk small hatchet is the baby of them all weighing just 11 ounces and with a 2½" face and 11" hickory handle. Ideal for splitting kindling. Book and protective leather sheath included.
£117.00 inc VAT
Gransfors Bruk Small Splitting Axe 441Gransfors Bruk Small Splitting Axe 441
Back In Stock
Gransfors Bruk Small Splitting Axe 441
Can be managed with one hand. Forged and ground to a concave, quite thin blade at the "bit". This design helps the axe to enter the wood rapidly and to efficiently split it when the thicker part follows to push the wood apart. The poll of this axe, like the poll on most axes, is not designed for pounding on a wedge. The head weighs 2 lb. The face is 2½". The 20" hickory handle has circular grooves...
£142.00 inc VAT

Gransfors Bruk Splitting Hatchet 439Gransfors Bruk Splitting Hatchet 439
Back In Stock
Gransfors Bruk Splitting Hatchet 439
The splitting Hatchets blade starts off concave and fairly thin, allowing easy penetration into the wood, where upon the thickening axe head exerts enormous splitting pressure. The small splitting axe, with 2½ lb. head, 2½" face & 16" textured hickory handle, is ideal for splitting kindling & smallish stove wood. It is designed for one-handed use. Note this axe’s poll is not hardened for use...
£142.00 inc VAT
Gransfors Bruk Splitting Maul 450Gransfors Bruk Splitting Maul 450
Back In Stock
Gransfors Bruk Splitting Maul 450
Also names Hammer-poll Axe. Designed for splitting apart large chunks of wood or "rounds". The Maul’s head is heavier and the cheek flare far wider behind the cutting edge compared with the Splitting Axes. The poll is designed for pounding on a splitting wedge. The axe has a 2½" face and weighs 5½ lb (2.5kg). 31" hickory handle. Overall weight 7 lb (3.2kg) Danger:...
£168.00 inc VAT

Gransfors Bruk Splitting Wedge 460Gransfors Bruk Splitting Wedge 460
Back In Stock
Gransfors Bruk Splitting Wedge 460
Forged steel wedge. Twisted for maximum splitting. The poll has ground edges. The wedge has a 1¾" face, weighs 4 lb. Danger: Always wear adequate clothing and protection for your face and eyes. Book and protective leather sheath included.
£72.50 inc VAT
Gransfors Bruk Swedish Broad AxesGransfors Bruk Swedish Broad Axes
Back In Stock
Gransfors Bruk Swedish Broad Axes
The pattern of the Gransfors Broad Axe and the handle is based on old Swedish logging techniques for squaring logs and structural timbers of all kinds. Has sufficient space between the "blade’s beard" and the handle for the user’s fingers. There are different options of bevels (double, left or right). You also have handle options of straight (so the blade is in line with the...
£225.00 inc VAT

Gransfors Bruk Wildlife Hatchet 415Gransfors Bruk Wildlife Hatchet 415
Back In Stock
Gransfors Bruk Wildlife Hatchet 415
The Gransfors Bruk Wildlife Hatchet is a small, light axe which can be easily carried, protected by its leather sheath, inside your backpack or on your belt. With this small axe you can cut branches in the garden or chop and split sticks for a camp fire. This little hatchet may awake memories and dreams of exciting camps and adventures. Length including the Hickory handle is 34cm (13.5")....
£125.00 inc VAT
Veritas Inlay Cutter Head for Router PlaneVeritas Inlay Cutter Head for Router Plane
Back In Stock
Veritas Inlay Cutter Head for Router Plane
This simple attachment for a lets you score a shallow groove to accept inlaid purfling, banding or stringing, taking advantage of the plane’s fence and depth-adjustment mechanism to precisely control groove position and depth. The cutter head holds a pair of included single-bevel slicing blades that score crisply defined groove outlines across, with or diagonal to the grain. By using a chisel...
£62.50 inc VAT

Veritas Inlay String Thicknesser
Back In Stock
Veritas Inlay String Thicknesser
The critical dimension for string inlay material is thickness. If too thick it won’t fit into the groove; too thin, and it will leave an unsightly gap. This Veritas Inlay String Thicknesser scrapes veneer - or any narrow, thin stock up to 2½" wide - to the exact thickness required. Instead of a sole that travels on top of the material, it has two skates to elevate the blade from the work surface....
£78.00 inc VAT
Veritas Template Groove Cutter, Inlay Chisel and Pin AwlVeritas Template Groove Cutter, Inlay Chisel and Pin Awl
Back In Stock
Veritas Template Groove Cutter, Inlay Chisel and Pin Awl
With slender handles for pencil-like control, these Veritas tools are useful for freehand inlay work and following templates. They are also good complements to the Veritas inlay groove and slicing tool since the groove and chisel tools can be used to clean up, deepen or terminate grooves without widening them. The Veritas template groove cutter is available in 0.025", 0.032" and 0.040"...
from £14.00 inc VAT

Crucible Dovetail TemplateCrucible Dovetail Template
Back In Stock
Crucible Dovetail Template
The Crucible Dovetail Template marks out dovetail joints – both the tails and the pins – and allows you to easily and accurately lay out the angled and straight parts of the joint. This template marks out the two most common dovetail slopes, 1:6 and 1:8 (9.5° and 7.1° respectively). This solid steel template is based on a discontinued version from Woodjoy Tools. We contacted...
£66.00 inc VAT
Sterling Tool Works Dovetailing SquareSterling Tool Works Dovetailing Square
Back In Stock
Sterling Tool Works Dovetailing Square
The re-designed Sterling Tool Works Dovetail Square is an excellent tool to help diagnose potential issues with your Dovetails before they become gaps in your assembled Joint. The Heart of this tool is the Sterling Dovetail Rule and was inspired by pattern makers squares that have been around for decades. Sterling Tool Works designed the reduced size blade for woodworking and to fit commonly available...
£115.00 inc VAT

Veritas Bar Gauge HeadsVeritas Bar Gauge Heads
Back In Stock
Veritas Bar Gauge Heads
Compares measurements e.g. equal diagnosis in drawers. Transfers dimensions without converting into numbers. Can be used for sizing shelves or interior trim on windows. Gauge head openings are 13 x 19mm, rip 6mm slices to make bars (wood not included).
£13.25 inc VAT
Veritas Imperial Rule for Sliding Square
Back In Stock
Veritas Imperial Rule for Sliding Square
These Imperial rules for the Veritas sliding squares are interchangeable.
£14.50 inc VAT

Bad Axe 14" Hybrid Thin Plate Carcass Saw - The BayonetBad Axe 14" Hybrid Thin Plate Carcass Saw - The Bayonet
Back In Stock
Bad Axe 14" Hybrid Thin Plate Carcass Saw - The Bayonet
The ''Bayonet'' - yet another strange name from Bad Axe Tool Works, but don't let that put you off. This carcass saw will excel at virtually any carcase joinery you throw at it. The hybrid-cut filing gives you a saw that will give you plenty of opportunities to put it to good use. Bad Axe Tool Works takes the finest materials and pairs it with great craftsmanship to produce...

5

£305.00 inc VAT
Thomas Flinn Pax 1776 Dovetail Saw
Back In Stock
Thomas Flinn Pax 1776 Dovetail Saw
Available in lengths 8", 10" and 12" with 20tpi, in Rip (for cutting with the grain). Blade depths are as follows: 8" Blade length = Blade depth 2" 10" Blade length = Blade depth 2" 12" Blade length = Blade depth 2 1/2" These Pax 1776 saws are the premium range made by Thomas Flinn & Co in Sheffield, England. The dovetails saws are beautifuly...
from £172.00 inc VAT

Thomas Flinn Pax Gent's Saw
Back In Stock
Thomas Flinn Pax Gent's Saw
The perfect partner to the Pax Hand and Tenon Saws, the classic Gents Saws are made for dovetail applications and are still a very popular seller today and come in a range of sizes to compliment your work. The saw has a brightly polished brass back and a Walnut handle. Individually blister packed. 20tpi as standard.
from £19.50 inc VAT
Thomas Flinn Pax Veneer Saw 15tpi
Back In Stock
Thomas Flinn Pax Veneer Saw 15tpi
The Pax Veneer Saw is made to enable cuts to be started in the centre of a panel of wood and for other inlaying work. The saw has 15tpi and the two different sides of the blade are made so that one side has a crosscut tooth formation and the other side has a rip tooth formation. The saw has a Walnut handle and are individually blister packed. Blade length 3".
£23.00 inc VAT

Veritas Flush Cutting SawVeritas Flush Cutting Saw
Back In Stock
Veritas Flush Cutting Saw
Traditionally used for the rapid trimming of plugs and dowels flush with a surface, the Veritas flush cutting saws can be used where you want to cut off a projection without damaging the surrounding or adjoining face. This is possible because the teeth are set one way only The 22 tpi Japanese tooth-pattern blade cuts aggressively (on the pull stroke), but does not mark the surface that it is...
from £25.95 inc VAT
Blue Spruce Classic Marking KnifeBlue Spruce Classic Marking Knife
Back In Stock
Blue Spruce Classic Marking Knife
The Blue Spruce Toolworks Classic Marking Knife has a Curly Maple Handle with .032" Small Spear Point Marking Blade and stainless steel ferrule. Your handcut joinery will take a huge leap forward when you stop marking with a pencil and start marking with a single bevel marking knife. A pencil line gives you nothing but a target. A marking knife gives you a physical impression in the wood which...
£82.50 inc VAT

Spare Blade for Blue Spruce Marking Knife
Back In Stock
Spare Blade for Blue Spruce Marking Knife
Blue Spruce .032, Spear Point, Small Marking Blade Take advantage of the tool-less collet design of the Classic Marking Knife and always work with a fresh cutting edge.
£17.00 inc VAT
Blue Spruce Round MalletBlue Spruce Round Mallet
Back In Stock
Blue Spruce Round Mallet
Blue Spruce Round Mallets feature a maple head infused with a tough polymer resin that increases the density of the maple by 80%. The infused head puts more “smack” into less space than simple wooden headed mallets. In addition to concentrating power, the resin protects the wood fibers from compression. This beautiful tool will still look beautiful after chopping hundreds of dovetails and...
from £120.00 inc VAT

Blue Spruce Rectangular MalletBlue Spruce Rectangular Mallet
Back In Stock
Blue Spruce Rectangular Mallet
For centuries, joiner’s have used wooden mallets to strike tool handles and tap assemblies together. Wood-on-wood minimizes damage to whatever is being hit. The problem is, once a mallet head is large enough to deliver an adequate blow, it’s often too big and awkward to fit where you need it. Blue Spruce Toolworks has designed an elegant, traditional looking Rectangular Mallet, but they’ve...
from £127.00 inc VAT
Red Rose Reproductions Compass AttachmentRed Rose Reproductions Compass Attachment
Back In Stock
Red Rose Reproductions Compass Attachment
Red Rose Reproductions dividers can now be converted to a compass for drawing arcs and circles using the compass attachment. To convert, one of the points is unscrewed from the dividers and replaced with the mounting bracket and screw. The second screw secures a wooden pencil in place. The attachment is universal, and will fit on either the 5" or 7½" divider. Two pencils are included,...
£36.00 inc VAT

Red Rose Reproductions DividersRed Rose Reproductions Dividers
Back In Stock
Red Rose Reproductions Dividers
These dividers were designed with a few key objectives in mind. First, they needed to have the ability to be quickly adjusted. Many dividers are fitted with thumb screws used to open and close the arms. This method is fine for some tasks, but falls short when rapid adjustments are needed, such as when using with the sector where adjustments are frequent and over a large range. These are fitted...
from £128.00 inc VAT
Dustpan
Back In Stock
Dustpan
A playful design that balances perfectly in the hand with a reassuringly sturdy feel. The quality is diifcult to put into words, but a very humble item made incredibly well with thought and care. A handy size to sweep bench debris from your workbench or floor into (brush available separately). Made from thin gauge folded stainless steel sheet, beech wood and formed stainless steel wire. The steel...
£35.00 inc VAT

Dustpan & Brush
Back In Stock
Dustpan & Brush
A beautifully designed dustpan and brush. Made in England by Turner & Harper. Consists of........... Dustpan - a playful design that balances perfectly in the hand with a reassuringly sturdy feel. The quality is diifcult to put into words, but a very humble item made incredibly well with thought and care. A handy size to sweep bench debris from your workbench or floor into (brush available separately). Made...
£58.00 inc VAT
Workshop BrushWorkshop Brush
Back In Stock
Workshop Brush
Sold as the Chiltern Bannister Brush, this soft hog hair brush removes even the finest of dust. It is perfect for dusting all manner of surfaces, from delicate objects to those awkward nooks & crannies. We've found it to be a really useful size for cleaning down your workbench. For the tidy people amongst us there is a beautifully proportioned dust pan available separately. The handle is...
£24.00 inc VAT

Compound Curve Spoon Knife (Right Handed)Compound Curve Spoon Knife (Right Handed)
Back In Stock
Compound Curve Spoon Knife (Right Handed)
A high quality spoon knife from Wood Tools designed for use with a combined 30 years of spoon carving experience. The knives are made from an excellent high alloy steel, very hard and tough so they hold an edge for a long time. They come razor sharp and ready to use. The handles are beech and around 7.5″ long, allowing for a great range of grips to be used efficiently. This compound curve...
£57.00 inc VAT
Open Curve Spoon Knife (Right Handed)Open Curve Spoon Knife (Right Handed)
Back In Stock
Open Curve Spoon Knife (Right Handed)
A high quality spoon knife from Wood Tools designed for use with a combined 30 years of spoon carving experience. The knives are made from an excellent high alloy steel, very hard and tough so they hold an edge for a long time. They come razor sharp and ready to use. The handles are beech and around 7.5″ long, allowing for a great range of grips to be used efficiently. The open curve spoon...
£57.00 inc VAT

The Large Carving AxeThe Large Carving Axe
Back In Stock
The Large Carving Axe
A large head with a long cutting edge, a flat grind for carving and a curvy ergonomic handle. A textured handle gives it beautiful grip in use. This heavier version of the Wood Tools carving axe is ideal for larger work like bowl carving, or for the stronger carver who is looking for something with a bit more power. The natural wood materials and hand grinding means there will be some aesthetic...
£75.00 inc VAT
The Robin Wood Carving AxeThe Robin Wood Carving Axe
Back In Stock
The Robin Wood Carving Axe
A razor sharp axe from Wood Tools that will do anything from felling small trees to splitting firewood, where it really excels is as a carving axe. The weight of the head is 550g and the total weight around 720g (1lb 11oz), handle length is 12.5" (31cm). This is a great mid weight carving axe that most people will use easily without getting tired, yet still heavy enough to remove wood quickly. A...
£69.00 inc VAT

Auriou 9'' Curved DrawknifeAuriou 9'' Curved Drawknife
Back In Stock
Auriou 9'' Curved Drawknife
Auriou's high quality, hand-forged tools are well known to discerning woodworkers, Famous for their hand stitched rasps and rifflers Auriou are using their small team of highly skilled artisans to produce a small range of tools to balance their portfolio of tools. Launched in autumn 2010 this large, curved-blade draw knife is sure to become a favourite in green woodworking circles. The 9"...
£135.00 inc VAT
Auriou 9'' Straight DrawknifeAuriou 9'' Straight Drawknife
Back In Stock
Auriou 9'' Straight Drawknife
Auriou's high quality, hand-forged tools are well known to discerning woodworkers, Famous for their hand stitched rasps and rifflers Auriou are using their small team of highly skilled artisans to produce a small range of tools to balance their portfolio of tools. Launched in autumn 2010 this large, straight-blade draw knife is sure to become a favourite in green woodworking circles. Turned...

5

£135.00 inc VAT

Veritas PM-V11 Bench ChiselsVeritas PM-V11 Bench Chisels
Back In Stock
Veritas PM-V11 Bench Chisels
Precision made in Veritas' own machine shop, these bench chisels are milled from PM-V11 steel (Rc61-63), an innovative proprietary alloy. This metal's micro-structure makes it extremely durable, so it can withstand the impact of heavy chopping cuts without chipping or deforming as readily as other tool steels, even at bevel angles as low as 20°. Highly wear resistant, the edge typically...

5

from £94.50 inc VAT
Robert Sorby Set of 5 Gilt Edge Chisels - Boxwood
Back In Stock
Robert Sorby Set of 5 Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle. This set of 5 comes in a cardboard presentation box and includes the following sizes: 1/4'', 3/8'', 1/2'', 3/4'' and 1'' Fitted with a tapered brass ferrule for comfort and elegance.
£231.00 inc VAT

Veritas PM-V11 Butt ChiselsVeritas PM-V11 Butt Chisels
Back In Stock
Veritas PM-V11 Butt Chisels
Veritas Butt chisels are made in wider sizes than most chisels, making them efficient for wasting out large areas, such as the mortices for installing butt hinges. They also have shorter blades that some woodworkers find offer improved control. Made from PM-V11 tool steel, the blades taper from shoulder to tip for strength and rigidity, and have parallel sides and true bevel edges for clearance...
from £81.00 inc VAT
Henry Taylor Cranked Bevel Edge Paring ChiselsHenry Taylor Cranked Bevel Edge Paring Chisels
Back In Stock
Henry Taylor Cranked Bevel Edge Paring Chisels
The Henry Taylor bent, or 'cranked neck' design of these special paring chisels allows the craftsman to use the chisel with the blade absolutely flat on the stock at all times. Blade about 8¾" long.
from £62.00 inc VAT

Shapton Ceramic Glass StoneShapton Ceramic Glass Stone
Back In Stock
Shapton Ceramic Glass Stone
The Shapton stones are ceramic which means they will wear more slowly than a traditional waterstone, but still cut quickly to get you back working in no time. The ceramic grit is bonded to float glass which also helps maintain the stones flatness. No need to soak, just splash water on to its surface, and you are ready to go. Like a waterstone these Shapton Glass Stones will need to be flattened...

5

from £29.95 inc VAT
Shapton Diamond Flattening PlateShapton Diamond Flattening Plate
Back In Stock
Shapton Diamond Flattening Plate
With diamond coating for ultra precise truing of ceramic stones and conventional water stones (tolerances +/-4 micron).
£249.95 inc VAT

Shapton Professional Sharpening Stone HolderShapton Professional Sharpening Stone Holder
Back In Stock
Shapton Professional Sharpening Stone Holder
Solid sharpening stone holder, of hard rubber with tempered glass core for secure positioning.
£92.00 inc VAT
Henry Taylor Heavy Duty Socket Firmer ChiselsHenry Taylor Heavy Duty Socket Firmer Chisels
Back In Stock
Henry Taylor Heavy Duty Socket Firmer Chisels
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers. The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased. Forged...
from £78.00 inc VAT
Page: 1 | 2 | 3 |