Category
Brand
Price
Additional Filters
345 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Record Circular (Circumference) Plane – 020c [Preowned, As New]Record Circular (Circumference) Plane – 020c [Preowned, As New]
Sold
Record Circular (Circumference) Plane – 020c [Preowned, As New]
In mint condition. This is a commission sale for a perfectly looked after unused plane. Quite a few of these planes, whether Stanley or Record are in circulation on Ebay and the like, but the buyer must be very wary as often these planes have had a hard life, particularly the vintage planes (the rivets on the sole near the mouth loosen and cracks can develop in the castings). No such fears here...
£185.00 (VAT exempt)
Clifton Convex Spokeshave – No.550 [Preowned]Clifton Convex Spokeshave – No.550 [Preowned]
Clifton Convex Spokeshave – No.550 [Preowned]
Pre-owned – some minor wear and cosmetic markings. G++ condition. A commission sale. Clifton spokeshaves (UK) are made from virtually unbreakable spheroidal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The...
£100.00 (VAT exempt)
Veritas Medium Shoulder Plane [Preowned]Veritas Medium Shoulder Plane [Preowned]
Veritas Medium Shoulder Plane [Preowned]
Little used with full iron. Cosmetic scratches and marks. G++ condition. A commission sale. This is Veritas' description for this plane.. ''The shoulder plane (a specialized rebate plane) is the ultimate tool for trimming a joint to a perfect fit. There is no better plane for trimming the shoulder of a tenon to perfection or for rebating work. The Veritas® medium shoulder...
£175.00 (VAT exempt)
Veritas Custom No.4 1/2 Smooth Plane [Preowned]Veritas Custom No.4 1/2 Smooth Plane [Preowned]
Veritas Custom No.4 1/2 Smooth Plane [Preowned]
This plane is from Veritas Custom range of bench planes, launched a few years ago. Bevel down blade. Adjustable mouth. 2 3/8” wide A2 blade. Common pitch frog (45 degrees) Tall front knob. Well protected by a light covering of oil this plane is in G++ to F condition. No box. A commission sale.
£180.00 (VAT exempt)
5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned]5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned]
5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned]
4 of these gouges have matching London pattern boxwood handles (the smallest has a 1” split near the brass ferrule). The shorter gouges are ½”, ¾”, 1” & 1 ½” wide with a medium sweep. The blade lengths vary from 4” (100mm) – 5” (125mm). The 5th gouge has a very slightly different London pattern boxwood handle but is a much...
£150.00 (VAT exempt)
Woodpeckers – 300mm Rule (with Rule Stop) [Preowned]Woodpeckers – 300mm Rule (with Rule Stop) [Preowned]
Woodpeckers – 300mm Rule (with Rule Stop) [Preowned]
Pre-owned but these items have seen very little use. The 300mm rule reads from the centre on one edge and left to right on the other edge. Each edge is bevelled. Very crisp white markings at 1mm increments. This rule has a very high level of accuracy. These rules are precision made from aircraft grade aluminium and anodized for surface protection and appearance. Woodpeckers say they are...
£66.00 inc VAT
Woodpeckers - 900m Rule (with Hook & Rule Stop 2) [Preowned]Woodpeckers - 900m Rule (with Hook & Rule Stop 2) [Preowned]
Woodpeckers - 900m Rule (with Hook & Rule Stop 2) [Preowned]
Pre-owned but in G+ to Fine condition The rule reads left to right up to 900mm on one bevelled edge. 0-450mm from the centre on the other edge. The ''0'' mark is the exact centre of the rule, with the scale running in both directions from that point. Its quick and easy to move the rule to locate centre of a board and then lay out equal spacing from that point Engraving tolerance...
£125.00 inc VAT
Lie-Nielsen No.4 – Bronze Smoothing Plane [Preowned, As New]Lie-Nielsen No.4 – Bronze Smoothing Plane [Preowned, As New]
Sold
Lie-Nielsen No.4 – Bronze Smoothing Plane [Preowned, As New]
Pre-owned in as new condition with LN plane sack. This is out of stock in our Lie-Nielsen plane section where it retails for £595. It is a popular plane. Hopefully we will be getting fresh stock during the summer. This is what we say about the brand-new version on our main LN section. “Lie-Nielsen's smoothing planes are precision machined from a manganese bronze casting, or...
£495.00 inc VAT
Lie Nielsen No.5 1/2 – Jack Plane [Preowned, As New]Lie Nielsen No.5 1/2 – Jack Plane [Preowned, As New]
Lie Nielsen No.5 1/2 – Jack Plane [Preowned, As New]
An unused, “as new” plane with Lie-Nielsen branded plane sock. This is what we say about the plane in our Lie-Nielsen section… "A Lie-Nielsen No.5 1/2 Jack Plane. Probably the most popular bench plane, and the one that many woodwork teachers recommend starting out with due to its versatility. The equivalent of a later type Stanley Bedrock No.605½. 14-3/4"...
£465.00 inc VAT
Brusso Hardware – HD-638 Quadrant Hinge [Clearance]Brusso Hardware – HD-638 Quadrant Hinge [Clearance]
Brusso Hardware – HD-638 Quadrant Hinge [Clearance]
Old stock (same as the new stock) but with old style packaging. This is new old stock – we are offering one pair of this hinge which is popular with box makers. The Brusso HD-638 brass quadrant hinge is engineered with a built-in stop that allows a lid to remain open at 95°. The arc is morticed into the side of the box, beneath the leaf. The hinge is sold in pairs. Each leaf measures...
£60.00 inc VAT
Veritas PMV11 – 2'' Blade [Preowned, As New]Veritas PMV11 – 2'' Blade [Preowned, As New]
Veritas PMV11 – 2'' Blade [Preowned, As New]
This is a replacement iron for a Veritas No.4 or No.5 ¼ hand plane. Pre-owned but appears unused. 1/8” thick.
£48.00 inc VAT
DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned]DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned]
Sold
DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned]
That’s DC for David Charlesworth of Hartland, Devon, England. This marking knife hasn’t left it’s packaging so is new, unused stock. These marking knives were made to David’s specification by (almost a rock star) Phil Edwards of Philly Planes fame
£45.00 inc VAT
Lie-Nielsen – 5 Bevel Edge Chisels [Preowned, As New]Lie-Nielsen – 5 Bevel Edge Chisels [Preowned, As New]
Lie-Nielsen – 5 Bevel Edge Chisels [Preowned, As New]
Unused, as new in original packaging. ¼”, 3/8”, ½”, ¾” & 1” Each box stamped April 2023 Save yourself a few hard-earned pounds (currently selling for £490 new). A commission sale.
£465.00 (VAT exempt)
Lie-Nielsen - 7 Pocket Leather Chisel Roll [Preowned, As New]Lie-Nielsen - 7 Pocket Leather Chisel Roll [Preowned, As New]
Lie-Nielsen - 7 Pocket Leather Chisel Roll [Preowned, As New]
Pre-owned but unused. A commission sale.
£88.00 (VAT exempt)
Benchcrafted Classic Leg Vice & Criss Cross Solo Package [Preowned, As New]Benchcrafted Classic Leg Vice & Criss Cross Solo Package [Preowned, As New]
Benchcrafted Classic Leg Vice & Criss Cross Solo Package [Preowned, As New]
Benchcrafted Classic Leg Vice & Criss Cross Solo Package A commission sale – unused, as new. This is what we say about these components for bench building on our main site. In the 19th and early 20th century, many vocational schools and commercial shops in France and its colonies were outfitted with Roubo-style benches and metal leg vice hardware. French hardware is typically made...
£375.00 (VAT exempt)
Hans Karlsson Short Handled 60mm Adze [Preowned, As New]Hans Karlsson Short Handled 60mm Adze [Preowned, As New]
Hans Karlsson Short Handled 60mm Adze [Preowned, As New]
These adzes are always in great demand but with a very limited production run. These famous Swedish made adzes are not so easy to get hold of (they seem to be sold out everywhere!). This example is a commission sale from a customer who has never used the adze, it is in “as new” condition, complete with a protective leather sheath. This 2 3/8” (about 60mm) wide cutting edge has...
£285.00 (VAT exempt)
Pair of Stanley 98/99 Rebate Planes [Preowned]Pair of Stanley 98/99 Rebate Planes [Preowned]
Sold
Pair of Stanley 98/99 Rebate Planes [Preowned]
They may look a bit scruffy but in fact that is just dried oil in the photos which disguises tools in G++ condition with full blades and nice rosewood knobs. This pair will clean up nicely. Patent date of Jan 95 (that will be 1895!).
£138.00 inc VAT
Lie-Nielsen – 1/2'' Mortise Chisel [Preowned, As New]Lie-Nielsen – 1/2'' Mortise Chisel [Preowned, As New]
Lie-Nielsen – 1/2'' Mortise Chisel [Preowned, As New]
Unused – pre-owned, as new
£110.00 inc VAT
9'' Straight Drawknife by Marsden Brothers [Preowned]9'' Straight Drawknife by Marsden Brothers [Preowned]
9'' Straight Drawknife by Marsden Brothers [Preowned]
Beech handles with brass ferules. This is a lovely drawknife which will serve you well for many a chair leg. The makers stamp is a little indistinct but it is Marsden Brothers. Owner’s stamp of C GIBSON
£72.00 inc VAT
Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]
Revised
Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]
This is old stock from the early days of starting up Classic Hand Tools. Sanderson Hardware are still going in California. (Note - these cotter pins are different to what they offer now). The diameter of the ring pull is 3/4". The rod stock is 1/8" diameter and 2 1/4” ong . The square plate is ¾” x 5/8” with 4 screw holes (screws provided). The plate has...
£30.00 inc VAT
Gifkins A10 Dovetail Jig [Preowned, As New]Gifkins A10 Dovetail Jig [Preowned, As New]
Gifkins A10 Dovetail Jig [Preowned, As New]
Unused. A commission sale. The A10 Gifkins Box Maker's Dovetail Jig. The Gifkins Dovetail Jig is ideal for boxes, drawers and other small pieces requiring clean, accurate, through-cut dovetail joints. After the initial setup, there is no need to make a trial joint every time you use the jig. Once adjusted, the Gifkins Box Makers Dovetail Jig always gives you exactly the same fit, no matter...
£295.00 (VAT exempt)
Gifkins F5 Finger Jig [Preowned, As New]Gifkins F5 Finger Jig [Preowned, As New]
Gifkins F5 Finger Jig [Preowned, As New]
Pre-owned - unused. A commission sale. The F5 template cuts a joint with delicate 5 mm fingers, and is fully adjustable, maintaining the quality and accuracy that is synonymous with products from Gifkins product range. The template uses a specially designed solid carbide cutter and will handle any thickness up to a maximum of 13 mm. As with dovetailing, the finger joints are cut on a table mounted...
£175.00 (VAT exempt)
Philip Marcou - Smoothing Plane [Preowned]Philip Marcou - Smoothing Plane [Preowned]
Revised
Philip Marcou - Smoothing Plane [Preowned]
PHILIP MARCOU S2 2008 HEAVY SMOOTHING PLANE It is not easy to find out a great deal about this plane by the highly respected planemaker Philip Marcou. Philip made this plane in 2008. Reviews of his work are not plentiful but it is obvious that his planes were very well received when he first started making in 2006. Philip Marcou is based in New Zealand so that may go some way to explaining...
£2,500.00 (VAT exempt)
Vintage Beech & Brass Brace – Lovely Patina [Preowned]Vintage Beech & Brass Brace – Lovely Patina [Preowned]
Revised
Vintage Beech & Brass Brace – Lovely Patina [Preowned]
There is no makers mark for this beech hand brass with brass escutcheons. The brass button that releases your bit from the brace is stiff (but you would be after 100 years or so) but it is working and will free up. This brace has a lovely patina. The head rotates freely as it should . The head may be rosewood but years of grubby carpenters hands have deposited blood sweat and tears all over the...
£65.00 inc VAT
Sorby Lock Mortise Chisel [Preowned]Sorby Lock Mortise Chisel [Preowned]
Revised
Sorby Lock Mortise Chisel [Preowned]
A handsome lock mortise chisel. 18” overall including a stubby 3'' oak handle. 1/2'' wide. Owners stamp - "C GIBSON" This beast will clean up very well.
£36.00 inc VAT
Vintage Beech Box Chamfer Plane [Preowned]Vintage Beech Box Chamfer Plane [Preowned]
Vintage Beech Box Chamfer Plane [Preowned]
2 3/8” wide , 6 ½” long overall with 1 5/8” wide blade. G++ condition. This would clean up beautifully and still work well. There is an old 2” long crack in the sole of the plane but we think it will still work as intended. A nice example. Owners stamp - "C GIBSON"
£35.00 inc VAT
Lie-Nielsen No. 4 1/2 - Smoothing Plane [Preowned, As New]Lie-Nielsen No. 4 1/2 - Smoothing Plane [Preowned, As New]
Lie-Nielsen No. 4 1/2 - Smoothing Plane [Preowned, As New]
Pre-owned, unused, as new. No box but Lie-Nielsen branded plane sack. Solidly built, this is the ultimate smoothing plane. It is longer, wider, and heavier than the No. 4, and its extra thick blade eliminates the possibility of chatter. Comes with a 45° frog as standard. Other frogs are available separately. 10-3/8" (264mm) long. 2-3/8" (60mm) blade. A2 steel. Iron body...
£425.00 inc VAT
Sterling Toolworks - Plane Adjusting Hammer [Preowned]Sterling Toolworks - Plane Adjusting Hammer [Preowned]
Revised
Sterling Toolworks - Plane Adjusting Hammer [Preowned]
This is a commission sale. Pre-owned but hardly used in G++ condition. Note - this hammer comes with a spare "spud" in a Sterling Toolworks branded bag. This is what we say about the hammer on our website, where it sells new for £175: "The Sterling Tool Works Plane Adjustment Hammer is designed to be used to adjust plane blades and wooden plane wedges for wooden hand...
£138.00 (VAT exempt)
Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New]Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New]
Revised
Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New]
Made by Pfeil - Switzerland Unused - fine condition - a commission sale. These Pfeil Punches for wood are for creating background detail for your carvings. They are made from steel and weigh 540g each. They are housed in a wooden base. Size - 10mm x 10mm x 135mm each. These are the same set of puches as Classic Hand Tools sell in their Pfeil carving tools section for £170 (and...
£138.00 (VAT exempt)
Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New]Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New]
Revised
Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New]
This is a great value buy. These Henry Taylor incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. This set comprises the following gouges (if bought new from our site they would cost you £214) F11...
£164.00 (VAT exempt)
5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned]5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned]
Revised
5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned]
These are pre-owned - little used chisels with cosmetic staining to the steel blades. We have quickly cleaned them up and we think they will be absolutely fine for many years to come presenting a very affordable opportunity to get a good spread of bench chisels. 3/8", 1/2", 5/8", 1", 1 1/4" wide Boxwood round handles with brass ferrules (the largest one is split but it isn't working free and could...
£65.00 (VAT exempt)
Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]
Revised
Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]
Still in their original wrapping, this set comprises of 12 bevel edge chisels from the brand IYOROI in linen roll. 223mm in overall length. Red oak handles. Black finish to the blades with polished hollows. Black finish to striking hoops. Hollow ground backs with single flutes for all widths. Widths are as follows: 1.5, 3, 6, 9, 12,15,18, 21, 24, 30, 36 & 42mm. Denim tool...
£420.00 (VAT exempt)
Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New]Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New]
Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New]
Unused, as new. White paper tool steel and high carbon steel laminated blade with red oak handle and steel striking hoop. 240mm overall. 60mm blade. White paper steel (Shirogami in Japanese) is a carbon tool steel that is ideally suited to the production of chisels. It exhibits superior durability when compared to alloyed blue paper steels. Widely available in the UK for about £70...
£58.00 (VAT exempt)
Clifton No.3 - Smoothing Plane [Preowned]Clifton No.3 - Smoothing Plane [Preowned]
Revised
Clifton No.3 - Smoothing Plane [Preowned]
Pre-owned, a commission sale. This plane has seen little use and is in G++ condition with original box and packaging. This is the smallest smoothing plane Clifton make; ideal for those with smaller hands, or those with smaller jobs that don't require so much heft. Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment...
£245.00 (VAT exempt)
Veritas - Small Shoulder Plane [Preowned]Veritas - Small Shoulder Plane [Preowned]
Revised
Veritas - Small Shoulder Plane [Preowned]
Pre-owned, a commission sale. This is what we and Lee Valley Tools say about the small shoulder plane... "Designed to seat nicely in the hand, the smallest Veritas shoulder plane is easily controlled using a one-handed grip. The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest...
£175.00 (VAT exempt)
Veritas No.112 - Large Scraping Plane [Preowned]Veritas No.112 - Large Scraping Plane [Preowned]
Revised
Veritas No.112 - Large Scraping Plane [Preowned]
Pre-owned, a commission sale. Original packaging, instruction leaflet and Veritas plane sack. This plane hasn't seen much work at all. G++ This is what we and Lee Valley Tools say about this large scraping plane.. "The Veritas® scraping plane is the ideal tool for final smoothing, especially when you have to deal with highly figured wood or reversing grain. With a well-sharpened...
£205.00 (VAT exempt)
Lie-Nielsen No.073 - Large Shoulder Plane [Preowned]Lie-Nielsen No.073 - Large Shoulder Plane [Preowned]
Revised
Lie-Nielsen No.073 - Large Shoulder Plane [Preowned]
Pre-owned in excellent condition with a branded plane sack. This description is from our main Lie-Nielsen section where this plane (without plane sack is normally available for £376 - but we are currently out of stock!) ''A versatile, general purpose shoulder plane with nice heft and the best size to start with. This all-metal shoulder plane is based on the Record 073, which in...
£305.00 inc VAT
Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned]Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned]
Revised
Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned]
This is a commission sale. Used but in G++ condition 3/8” straight blade. Reversible curved/straight detachable fence. Instruction leaflet. This is our description from our LN section… “A router plane is a great tool for working shallow mortices - hinge gains, inlay, door locks, trimming tenons and the like. Lie-Nielsen's version is based on an early Stanley...
£205.00 (VAT exempt)
Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned]Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned]
Revised
Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned]
Pre-owned – a commission sale 4, 5, 6, 7 ,8 & 10mm blades come with this plane which has been lightly used. Original packaging (the box is a bit tatty) and Instruction booklet. The condition of the plane and blades is Good ++ (G++) which indicates it is not new, but has been well cared for and has no defects over and above superficial cosmetic blemishes. “Closest in size...
£238.00 (VAT exempt)
5 Tasai Bench Chisels [Preowned]5 Tasai Bench Chisels [Preowned]
Revised
5 Tasai Bench Chisels [Preowned]
These are pre-owned bevel edged bench chisels from the forge of master blacksmith Akio Tasai in Japan. A commission sale. They have been used very sparingly; the hoops have been struck and there are burrs to be attended to in order to safeguard your fingers but that is a quick and easy job. The chisels and box are in G++ condition. Laminated steel with single hollows. The cutting edge is blue...
£1,025.00 (VAT exempt)
Flexcut Left-Handed Carving Jack [Clearance]Flexcut Left-Handed Carving Jack [Clearance]
Revised
Flexcut Left-Handed Carving Jack [Clearance]
FLEXCUT CARVIN JACK - older version, new. LEFT HANDED For you whittlers out there! This is the older version of the Carvin Jack launched successfully by USA manufacturer Flexcut some 20 years ago to great acclaim. This a new unused version of the Carvin Jack in original packaging (the new version is labelled 2.0) Blades firmly lock in both open and closed positions Supplied with SlipStrop...
£88.00 inc VAT
Lie-Nielsen SD-3 - Saw Nut Screwdriver [Preowned]
Lie-Nielsen SD-3 - Saw Nut Screwdriver [Preowned]
Tenon saw nut and thicknessing gauge screwdriver. Pre-owned, in great condition with a few dings to the handle. Curly Maple Handle (newer versions have cherry handles) Modelled after gunsmith’s screwdrivers with machined tips, these screwdrivers are made to fit specific screw slots on Lie-Nielsen tools to give you control without slipping. Hardened 416 Stainless Steel blades, numbered...
£42.00 inc VAT
Lie-Nielsen - Spare Blade for a LN 97 1/2 Small Chisel Plane [Preowned, Unused]Lie-Nielsen - Spare Blade for a LN 97 1/2 Small Chisel Plane [Preowned, Unused]
Lie-Nielsen - Spare Blade for a LN 97 1/2 Small Chisel Plane [Preowned, Unused]
As new, pre-owned. Replacement blade for the Lie-Nielsen No. 97½ Small Chisel Plane. Comes with a 25° flat ground bevel. 1¾" wide x 3/16" thick A2 cryogenically treated Tool Steel
£54.00 inc VAT
File Sets
30%
OFF
Percent Off
File Sets
The RH Preyda File Sets, made from prized Arkansas Novaculite, are essential for deburring, chamfering, and creating smooth finishes. These files are highly valued by craftsmen such as gunsmiths, dentists, machinists, and jewelers. File shapes: Round, Square, Triangular, and Knife Blade Size: 4" x 3/8" (101.6mm x 9.5mm) Grit options: Soft (400-600), Surgical Black (4000-6000), Translucent...
Was £51.00 Now from £35.70 inc VAT
Square Double Angle File Translucent
25%
OFF
Percent Off
Square Double Angle File Translucent
The Square Double Angle Files offered by Classic Hand Tools are high-quality sharpening tools made from Arkansas Novaculite, a natural material prized for its ability to both sharpen and polish blades effectively. These files are designed to accommodate the various shapes and gauges of V-tools, making them ideal for detailed sharpening, finishing, and maintaining the edges of your tools. Key Features: Material:...
Was £16.80 Now £12.60 inc VAT
6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]
Sold
6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]
Six, unused Jorgensen hand screws. As new. A commission sale. From the manufacturer's website... "Seasoned, straight-grain hard maple wood jaws marry with cold drawn steel-spindles and nuts with special double-lead threads. Together they create a handscrew clamp that holds tightly over broad areas, providing greater reach and a wider distribution of pressure than other clamps. The angle...
£180.00 (VAT exempt)
Lie-Nielsen - Boggs Spokeshave (Curved) [Preowned]Lie-Nielsen - Boggs Spokeshave (Curved) [Preowned]
Sold
Lie-Nielsen - Boggs Spokeshave (Curved) [Preowned]
Pre-owned, used. G++ condition. A commission sale. Note: the curve on this spokeshave is extremely shallow. The Boggs Spokeshave is hefty and solid, weighing 12oz. Designed for fine, precise shaping in all woods. Body is 10" long with a 1" wide very slightly curved sole. The sole of this spokeshave has a gentle (almost imperceptible) 5 degree radius for working inside curves. 2"...
£175.00 (VAT exempt)
3 Vintage Mortise Chisels [Preowned]3 Vintage Mortise Chisels [Preowned]
Sold
3 Vintage Mortise Chisels [Preowned]
These beauties (2 stamped BUCK and the larger one stamped I & H SORBY) I & H SORBY – octagonal handle – ½” wide BUCK – oval handle 3/16” wide BUCK – oval handle 3/8” wide Great condition. 11 1/2” - 12 ¼” overall length.
£72.00 inc VAT
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |