Friday Finds - Premium Second Hand Tools for sale in the UK: Page 6

2 Iyoroi Japanese Slick Chisels [Preowned, Unused, SOLD]

2 Iyoroi Japanese Slick Chisels [Preowned, Unused, SOLD]

Unused paring chisels/slicks from Iyoroi who are makers from Japan. Widths are 36mm & 42mm All with single hollows. Length overall of 580mm Red Oak handles. The blades are 120mm long. Bevel edged. These are long paring chisels refered to as slicks and are used for cleaning up joints such as the mortise and tenon joints. They are not design to be struck with a mallet or hammer. A...

EUR €246.25 excl tax, duties and fees

Iyoroi Japanese Diamond Backed Paring Chisel/Slick (24mm) [Preowned, Unused, SOLD]

Iyoroi Japanese Diamond Backed Paring Chisel/Slick (24mm) [Preowned, Unused, SOLD]

Unused paring chisel/slick from Iyoroi who are makers from Japan. 24mm wide with single hollow. Length overall - 580mm Oak handle. The blades are 120mm long. The back is diamond shaped as opposed to bevel edged. This is a long paring chisels refered to as a slick and is used for cleaning up joints such as the mortise and tenon joints. They are not design to be struck with a mallet...

EUR €114.53 excl tax, duties and fees

Union No.42 Tongue & Groove Plane [Preowned, SOLD]

Union No.42 Tongue & Groove Plane [Preowned, SOLD]

A very nice example of the No.42 tongue & groove plane by UNION This dates from about the 1920's This Union No.42, which is similar to the Stanley plane, has a fence that you can swing through 180 degrees. One way for the tongue, then swing it around for the groove. In great order this plane is ready to tongue and to groove. This is a commission sale.

EUR €148.89 excl tax, duties and fees

Record 778 Rebate & Fillester Plane [Preowned, Unused, SOLD]

Record 778 Rebate & Fillester Plane [Preowned, Unused, SOLD]

Unused in original packaging. No. 778 plane has two positions for the cutter — one for ordinary work, and the other for bull-nose work. It is fitted with a hardened steel spur, an adjustable depth gauge which is removable, and an adjustable fence which can be used on either side of the plane. This plane is adaptable for many other purposes besides rabbeting when the fence and arms are...

EUR €68.72 excl tax, duties and fees

10mm Corner Chisel [Preowned, SOLD]

Manufacturer unknown. Oval beech handle with brass ferrule and leather washer. 240mm overall with 120mm handle. HSS blade. Blade thickness is a very consistent 2.5 mm up to where it bevels. This has been well made whoever did it.

EUR €26.72 excl tax, duties and fees

William Marples 5/8'' socketed Lock Mortise Chisel [Preowned, SOLD]

William Marples 5/8'' socketed Lock Mortise Chisel [Preowned, SOLD]

17 1/2'' overall with a short stubby (slightly battered) beech handle. Original Marples trade label on handle. Also stamped W.Marples & Sons, Sheffield, England on the steel. This is the improved sock mortise chisel pattern No.745 This is in G++ condition You can learn more here.. https://williammarplesandsons.com/lock-mortice-chisels/

Was €40.09 Now EUR €28.63 excl tax, duties and fees

Marples Paring Chisels 1'' & 3/4'' [Preowned, Unused, SOLD]

Marples Paring Chisels 1'' & 3/4'' [Preowned, Unused, SOLD]

385mm overall with 140mm boxwood handles Pre-owned - Unused The 1'' has a cracked brass ferrule. Otherwise in G++ condition. We don't think they have done any work. The handles and blades are marked Marples. 2 bevel edge paring chisels.

EUR €45.81 excl tax, duties and fees

Marples Bevel Edged Bench Chisels x4 (1/4'', 3/8'', 5/8'' & 3/4'') [Preowned, SOLD]

Marples Bevel Edged Bench Chisels x4 (1/4'', 3/8'', 5/8'' & 3/4'') [Preowned, SOLD]

Pre-owned, little used, will clean up easily to look almost new. Beech handles with brass ferrules. 220-240mm overall. Edge guards included.

EUR €34.36 excl tax, duties and fees

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

This 3 volume set of Knight's American Mechanical Dictionaries and the single volume of Knight's New Mechanical Dictionary (Supplement) was reprinted jointly by The Mid-West Tool Collectors Association and The Early American Industries Association October 1979. It is written elsewhere that "This work has been selected by scholars as being culturally important, and is part of the knowledge...

EUR €286.34 excl tax, duties and fees

Plough Plane Project [Preowned, SOLD]

So, this grubbly plane, like Fraser, needs a good clean. Beech, with brass tips, escutcheons and depth stop screw. You do not need to put on the marigolds or find a buffing wheel to clean it up. Nothing too heavy is needed , just a bit of tender loving care with a bit of fine wire wool to clean off a few idle paint marks, years of dust layers and a minor amount of surface rust. We think this...

EUR €71.58 excl tax, duties and fees

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Here is a rare treat. The left hand version has been discontinued and the right handed plane in bronze has not been seen for a few years yet. The Lie-Nielsen No 140 Skew Block Plane is based on the long unavailable Stanley 140, this multi-talented tool is designed to deal with difficult woods using a combination of a low angle approach, shear cutting action from the skewed and tilted blade. A...

EUR €1,145.34 excl tax, duties and fees

Timber Scribe and Race Knife [Preowned, SOLD]

Timber Scribe and Race Knife [Preowned, SOLD]

Rosewood handled with brass ferrule, this attractive race knife and scribe is unmarked. Original including the wing nut. A lovely vintage tool. Timber scribes were used to mark casks, imported timber, packing crates and trees for felling.

EUR €34.36 excl tax, duties and fees

Saddlers Round Knife - C S Osborne & Co. Newark N.J [Preowned, SOLD]

Saddlers Round Knife - C S Osborne & Co. Newark N.J [Preowned, SOLD]

This is a lovely vintage Saddlers round knife from the USA manufacturer CS Osborne. It is difficult to date but from its form and simplistic beauty we hazard a guess that it is an early one dating as far back as the 19th Century.The blade has a lovely ring to it when flicked by a finger. It is marked ''C S Osborne & Co. Newark N.J Made in USA'' on the blade. It is also marked...

EUR €47.72 excl tax, duties and fees

Record 041 Shoulder Plane (5/8'' Blade) [Preowned, SOLD]

Record 041 Shoulder Plane (5/8'' Blade) [Preowned, SOLD]

This is preowned, has a full blade, and has seen little or no use.

EUR €80.17 excl tax, duties and fees

Armourers Brass Brace [Preowned, SOLD]

This is a sweetie! Stamped RL . iii .10-13 . N . With the government arrow underneath. Measuring 10" overall with a tapered square chuck and a thumb screw (which we do not think is original but it works perfectly well). The 2 1/4” diameter rotating head connects to the body of the brace and it all seems to be working jolly nicely.

EUR €33.41 excl tax, duties and fees

3 Bridge City Tool Works Scratch Awls [Preowned, Unused, SOLD]

3 Bridge City Tool Works Scratch Awls [Preowned, Unused, SOLD]

SA 1 v 2 - 4 1/2" (115mm) scratch awl (red handle) SA - 2 v 2 - 8" (200mm) scratch awl (blue handle) SA - 3 v 2 - 8" (200mm) bent tip scratch awl (black handle) CNC-turned and anodised aluminium heads. Used for scribing wood, metal, glass, ceramics etc. You can draw lines in the tightest of situations, such as dovetails, mortises, tenons or profiles. The hardened steel blade is long and narrow and...

EUR €57.27 excl tax, duties and fees

2 Scratch Awls - Bridge City Tool Works [Preowned, Unused, SOLD]

2 Scratch Awls - Bridge City Tool Works [Preowned, Unused, SOLD]

SA - 2 v 2 - 8" (200mm) scratch awl (blue handle) SA - 3 v 2 - 8" (200mm) bent tip scratch awl (black handle) These have not been used. The lids to the original BC boxes are all missing. CNC-turned and anodised aluminium heads. Used for scribing wood, metal, glass, ceramics etc. You can draw lines in the tightest of situations, such as dovetails, mortises, tenons or profiles. The hardened steel...

Was €45.81 Now EUR €41.23 excl tax, duties and fees