Category
Brand
Collection
Price
Additional Filters
438 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Lie-Nielsen Toolworks Honing Guide with 3 pairs of jaws [Pre-owned]
Lie-Nielsen Toolworks Honing Guide with 3 pairs of jaws [Pre-owned]
This honing guide is pre-owned and currently has the long jaws fitted. Also included are the standard jaws and the mortise jaws. This description of the honing guide is from our Lie-Nielsen section of our website: "The Lie-Nielsen version of the side clamping style of honing guide is solidly machined from stainless steel, with a bronze bearing. The honing guide features removable jaws:...
USD $305.01 excl tax, duties and fees
Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned]Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned]
Special Offer
Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned]
Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane. Toothed blades have small chisel-like teeth .030'' (.762mm) wide and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set smoothing plane ideally purchased through Classic Hand Tools. The blade comes with a 25° flat ground bevel; it sits in the tool at...
USD $81.34 excl tax, duties and fees
Bespoke E. Garlick & Sons Lynx 14'' Tenon Rip Saw [Preowned]Bespoke E. Garlick & Sons Lynx 14'' Tenon Rip Saw [Preowned]
Special Offer
Bespoke E. Garlick & Sons Lynx 14'' Tenon Rip Saw [Preowned]
A bespoke made rip cut 11tpi tenon saw with lovely walnut handle. This saw was made by Thomas Flinn & Co., saw and tool makers in Sheffield, England. This closed walnut handled LYNX tenon saw is 14'' (350mm) long. This heavy brass backed tenon saw is in G++ condition having been well cared for during its use. The steel plate is 3 1/8'' deep, a heavy brass back with...
USD $115.23 excl tax, duties and fees
Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]
Special Offer
Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]
Still in their original wrapping, this set comprises of 12 bevel edge chisels from the brand IYOROI in linen roll. 223mm in overall length. Red oak handles. Black finish to the blades with polished hollows. Black finish to striking hoops. Hollow ground backs with single flutes for all widths. Widths are as follows: 1.5, 3, 6, 9, 12,15,18, 21, 24, 30, 36 & 42mm. Denim tool...
USD $535.46 excl tax, duties and fees
Starrett 150mm Dividers [Pre-owned]Starrett 150mm Dividers [Pre-owned]
Starrett 150mm Dividers [Pre-owned]
In excellent condition. Little used. In original Starrett box. Starrett code – 277 – 6
USD $81.34 excl tax, duties and fees
Veritas Dual Marking Gauge with shaft clamp [Pre-owned]Veritas Dual Marking Gauge with shaft clamp [Pre-owned]
Sold
Veritas Dual Marking Gauge with shaft clamp [Pre-owned]
In fine working order with crisp marking cutters, this marking gauge would pass “as new”. It is pre-owned and has been used a little. The Veritas Dual Marking Gauge has two independently adjustable rods, which will allow you to set two measurements at once, so you can quickly alternate between them when transferring or marking repetitive dimensions. Projection up to 5-3/4" is...
USD $50.84 excl tax, duties and fees
Veritas Skew Rebate Plane – Right Hand [Pre-owned]Veritas Skew Rebate Plane – Right Hand [Pre-owned]
Sold
Veritas Skew Rebate Plane – Right Hand [Pre-owned]
In almost perfect condition. This is what we write about the plane in our main Veritas Tools section “Like the Stanley #289 that inspired it, it is configured with a blade skewed at a 30° angle to reduce cut resistance, aid in shaving clearance, and help pull the fence tight against the workpiece. Because the blade sits flush with the side of the plane body, corner cuts are clean and...
USD $276.77 excl tax, duties and fees
Curved Boggs Spokeshave - Lie-Nielsen Toolworks [Pre-owned]Curved Boggs Spokeshave - Lie-Nielsen Toolworks [Pre-owned]
Curved Boggs Spokeshave - Lie-Nielsen Toolworks [Pre-owned]
Pre-owned but little used in Lie Nielsen leather case. Note: the curve is extremely shallow. This Boggs Spokeshave is hefty and solid, weighing 12 oz. Designed for fine, precise shaping in all woods. Body is 10" long with a 1" wide sole. The sole of the curved spokeshave has a gentle, 5" radius for working inside curves. 2" wide x 1/8" thick A2 blade. Bronze...
USD $231.58 excl tax, duties and fees
Flat Boggs Spokeshaves - Lie-Nielsen Toolworks [Pre-owned]Flat Boggs Spokeshaves - Lie-Nielsen Toolworks [Pre-owned]
Sold
Flat Boggs Spokeshaves - Lie-Nielsen Toolworks [Pre-owned]
Pre-owned but sparingly used. This Boggs Spokeshave is hefty and solid, weighing 12 oz. Designed for fine, precise shaping in all woods. Body is 10" long with a 1" wide flat sole. 2" wide x 1/8" thick A2 blade. Bronze body and cap. Hickory handles.
USD $163.80 excl tax, duties and fees
Gramercy Dovetail Saw [Pre-owned]Gramercy Dovetail Saw [Pre-owned]
Gramercy Dovetail Saw [Pre-owned]
9” long rip cut, 19 ppi, dovetail saw which tapers from the toe for ease of use. American black walnut handle which affords a 3-finger grip, this is a lightweight saw that feels very comfortable in the hand. The saw plate is 0.018” thick allowing for a narrow kerf. Hand filed with minimum set (approx. 0.003”) Brass backed. Made in the USA. This is pre-owned and has been...
USD $254.18 excl tax, duties and fees
1/4'' Corner Chisel by Lie-Nielsen [Pre-owned]1/4'' Corner Chisel by Lie-Nielsen [Pre-owned]
Sold
1/4'' Corner Chisel by Lie-Nielsen [Pre-owned]
Not used very much at all. Original box. Dates from 2012.
USD $141.21 excl tax, duties and fees
1/4'' Mortise Chisel by Lie-Nielsen [Pre-owned]1/4'' Mortise Chisel by Lie-Nielsen [Pre-owned]
Sold
1/4'' Mortise Chisel by Lie-Nielsen [Pre-owned]
Not used very much at all. Good ++ - Fine (F) condition. 1/4" LN mortise chisel.
USD $99.41 excl tax, duties and fees
HSS 3-wing Deburring Tool and Handled Burnishing Rod - Clifton, Sheffield [Preowned]HSS 3-wing Deburring Tool and Handled Burnishing Rod - Clifton, Sheffield [Preowned]
Revised
HSS 3-wing Deburring Tool and Handled Burnishing Rod - Clifton, Sheffield [Preowned]
Clifton haven’t made the high-speed steel deburring tool since being taken over by Thomas Flinn so this handsome tool is a little bit of a rarity. The burnishing tool is still offered today. Rosewood handles with brass ferules/collars (to protect your knuckles). Pre-owned but little used.
USD $74.56 excl tax, duties and fees
Stanley 271 - Small Router Plane [Preowned]Stanley 271 - Small Router Plane [Preowned]
Revised
Stanley 271 - Small Router Plane [Preowned]
A little used Stanley 271 small router plane Marked 'STANLEY No.271 MADE IN ENG' on the body of the plane. 1/4'' cutter which can be mounted for use as either an open or closed throat router. 3” x 2” overall. In original orange box with instruction leaflet.
USD $47.45 excl tax, duties and fees
Rob Cosman Dovetail Marking Knife & Dovetail Marker [Preowned]Rob Cosman Dovetail Marking Knife & Dovetail Marker [Preowned]
Revised
Rob Cosman Dovetail Marking Knife & Dovetail Marker [Preowned]
It doesn’t look like this pre-owned marking knife has done much marking out as it presents in Good++(G++) to Fine (F) condition in original packaging. The dovetail marker (1:7 & 1:6) has been used. This dovetail marking knife took Rob Cosman several years to design and perfect. Hand-cut dovetailing is Rob's specialism, and he has no doubt this tool is a great asset to those of you...
USD $65.52 excl tax, duties and fees
Stonemasons Firesharp Chisels – 10 widths [Clearance]Stonemasons Firesharp Chisels – 10 widths [Clearance]
Stonemasons Firesharp Chisels – 10 widths [Clearance]
10 double-hooped strong-as-an-ox stone masonry chisels made in France by Forge de Saint Juery home of Auriou Tool Works. Widths: 10, 15, 25, 30, 35 ,40, 45, 50, 55 & 60mm. 270mm overall length. New old stock. These wooden handled chisels are ideal for softer stone including alabaster, limestone and soapstone. When they are gone, they are gone! 3 sets available – you...
USD $288.07 excl tax, duties and fees
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
11 Toothed Chisels: 10mm wide 3 pointed teeth 15mm wide 4 pointed teeth 20mm wide 5 pointed teeth 25mm wide 6 pointed teeth 30mm wide 7 pointed teeth 35mm wide 8 pointed teeth 40mm wide 9 pointed teeth 45mm wide 10 pointed teeth 50mm wide - 11 pointed teeth 55mm wide - 11 pointed teeth 60mm wide - 13 pointed teeth 270mm overall length. New old stock. Be advised...
USD $378.44 excl tax, duties and fees
3 French Drags – Quality Stone Masons Tools [Clearance]3 French Drags – Quality Stone Masons Tools [Clearance]
3 French Drags – Quality Stone Masons Tools [Clearance]
French drags are the equivalent of the plane in woodworking. They are used for soft stone and consist of 9 blades set at skewed angles over the length of a block of wood. 2 of these drags have toothed blades (straight and circular) to allow removal of surface material. The 3rd drag (30mm width) has toothless blades for smoothing out the surface of the stone. These 3 drags have the same overall...
USD $96.02 excl tax, duties and fees
Tapered Carcass Saw – 14 ppi – Cross Cut - Lie Nielsen Toolworks [Preowned]Tapered Carcass Saw – 14 ppi – Cross Cut - Lie Nielsen Toolworks [Preowned]
Tapered Carcass Saw – 14 ppi – Cross Cut - Lie Nielsen Toolworks [Preowned]
Pre-owned 14” tapered carcass saw – 14 ppi made in 2014. In excellent condition, with original box
USD $178.49 excl tax, duties and fees
Flexcut – 3 Special Edition Forged Carving Knives [Clearance]
Flexcut – 3 Special Edition Forged Carving Knives [Clearance]
Upsweep, Detail & Cutting Knives KN201, KN203 & KN204 New, old stock. With attractive bocote and leather insert handles these 3 knives were part of a small special edition from well-known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall. High carbon drop forged blade edges, the cutting and...
USD $81.34 excl tax, duties and fees
Flexcut – 2 Special Edition Forged Upsweep & Cutting Knives KN203 & KN204 [Clearance]
Flexcut – 2 Special Edition Forged Upsweep & Cutting Knives KN203 & KN204 [Clearance]
Upsweep & Cutting Knives KN203 & KN204 New, old stock. With attractive bocote and leather insert handles these 2 knives were part of a small special edition from well-known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge each measuring approximately...
USD $56.48 excl tax, duties and fees
Flexcut – Special Edition Forged Upsweep Knife KN203 [Clearance]
Flexcut – Special Edition Forged Upsweep Knife KN203 [Clearance]
New, old stock. With attractive bocote and leather insert handles this knife was part of a small special edition from well known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge measuring 35mm. The blade profile differs slightly from current Flexcut offerings...
USD $28.24 excl tax, duties and fees
Flexcut – Special Edition Forged Cutting Knife KN204 [Clearance]
Flexcut – Special Edition Forged Cutting Knife KN204 [Clearance]
New, old stock. With attractive bocote and leather insert handles this knife was part of a small special edition from well known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge measuring 35mm. The blade profile differs slightly from current Flexcut offerings...
USD $28.24 excl tax, duties and fees
7 Pneumatic Stone Carving Tools - Auriou [Clearance]7 Pneumatic Stone Carving Tools - Auriou [Clearance]
Last Ones!
7 Pneumatic Stone Carving Tools - Auriou [Clearance]
Yes! The blacksmiths at legendary French artisan tool makers AURIOU TOOLWORKS also used to make tools for stone sculptors who use air powered chisels for their work. A bit noisy for us (and them maybe because they have stopped making them!) We have 3 gouges: 10mm wide, 15mm wide and 20mm wide. Also 2 snakes tongue (pied a biche) tools - for heavy shaping work (10 & 15mm wide) And 2 point...
USD $112.97 excl tax, duties and fees
Vintage Squares [Preowned]Vintage Squares [Preowned]
Revised
Vintage Squares [Preowned]
All squared up? A selection of attractive vintage squares – all in G+ - G++ condition They probably aren’t super accurate, but they will be good enough for most DIY tasks should you chose to use them. However, cleaning these up (which we haven’t had time to do) will release the beauty of the wood and make the brass glisten like gold. A little bit of wire wool (medium) some...
USD $33.89 excl tax, duties and fees
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
Last Ones!
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
New This system (RSTM-SCT2) comes with the carbide detail point cutter plus the following High Speed Steel Cutters RSTM-TIP3 HSS Square Cutter RSTM-TIP4 HSS French Curve Cutter RSTM-TIP5 HSS Dovetail/Box Cutter RSTM-TIP6 HSS Teardrop Inside/Outside Cutter RSTM-TIP7 HSS Mushroom Cutter And as a Brucey Bonus RSTM-GT2 Excelsior Detail Point Cutter (titanium nitride)
USD $141.21 excl tax, duties and fees
Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance]
Special Offer
Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance]
New This system (RSTM-SCT3) comes with the carbide square cutter plus the following titanium nitride cutters RSTM-GT2 Excelsior Detail Point Cutter RSTM-GT4 Excelsior French Curve Cutter RSTM-GT6 Excelsior Teardrop Inside/Outside Cutter RSTM-GT7 Excelsior Mushroom Cutter
USD $129.91 excl tax, duties and fees
Robert Sorby TURNMASTER Woodturning System [Clearance]
Special Offer
Robert Sorby TURNMASTER Woodturning System [Clearance]
New "old" tool that we are clearing from our stock due to a summer stock clean. This system (RSTM-SCT3) comes with the single carbide square cutter only. Some more info here from Robert Sorby
USD $84.73 excl tax, duties and fees
Woodturning – Robert Sorby Spindle Gouge 1/2'' – Unhandled [Clearance]
Last Ones!
Woodturning – Robert Sorby Spindle Gouge 1/2'' – Unhandled [Clearance]
New, walleted surplus stock. These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed. Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle sticks and other spindle projects. RS840 1/2'' This blade is compatible with The SOVEREIGN SYSTEM
USD $28.24 excl tax, duties and fees
Woodturning – Robert Sorby Long & Strong Spindle Gouge 3/8'' – Unhandled [Clearance]
Revised
Woodturning – Robert Sorby Long & Strong Spindle Gouge 3/8'' – Unhandled [Clearance]
New, walleted surplus stock. Apart from the length of the blade, these tools are identical to Robert Sorby standard gouges. The increased length of the blades (12'') allows a further reach into the workpiece. This blade is compatible with The SOVEREIGN SYSTEM RS841 3/8''
USD $38.41 excl tax, duties and fees
1/2'' Large Carving Chisel by Flexcut USA [Clearance]1/2'' Large Carving Chisel by Flexcut USA [Clearance]
Last Ones!
1/2'' Large Carving Chisel by Flexcut USA [Clearance]
These unused tools were discontinued from Flexcut USA’s portfolio of large tools several years ago. These are unused new, old stock tools in perfect condition. Flexcut designed these beefy tools to be struck with a mallet when working on large sculptures. But of course, they can be used by hand to shape work without whacking with a mallet as required. Single bevel (underside) Code...
USD $16.95 excl tax, duties and fees
Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]
Last Ones!
Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]
These unused tools were discontinued from Flexcut USA’s portfolio of large tools several years ago. These are unused new, old stock tools in perfect condition. Flexcut designed these beefy tools to be stuck with a mallet when working on large sculptures. but of course, they can be used by hand to shape work without whacking with a mallet as required. The old Flexcut code is MC 302 which...
USD $16.95 excl tax, duties and fees
Karl Holtey 2 1/8'' Plane Blade [Clearance]Karl Holtey 2 1/8'' Plane Blade [Clearance]
Special Offer
Karl Holtey 2 1/8'' Plane Blade [Clearance]
Unused old stock. Stamped HOLTEY. Also stamped “s”. 4” overall. 2 1/8” wide. 3/16” thick. 4 positioning holes.
USD $56.48 excl tax, duties and fees
Karl Holtey 2 1/4'' Plane Blade [Clearance]Karl Holtey 2 1/4'' Plane Blade [Clearance]
Special Offer
Karl Holtey 2 1/4'' Plane Blade [Clearance]
Unused old stock. Stamped HOLTEY. Also stamped “2”. 9 1/8” overall. 2 ¼” wide. 3/16” thick. 7 positioning holes.
USD $73.43 excl tax, duties and fees
SEVEN Henry Taylor Straight Fishtail Gouges [Clearance]SEVEN Henry Taylor Straight Fishtail Gouges [Clearance]
Last Ones!
SEVEN Henry Taylor Straight Fishtail Gouges [Clearance]
New current stock. A fishtail bundle! Ok – so this is excess stock created through our enthusiasm to promote this great British brand a few years back. We still love these Henry Taylor carving tools but when HT slimmed down their overall offering, we were holding quite a lot (hundreds!) of carving tools. At that point we decided to concentrate our future investment in woodcarving hand tools...
USD $163.80 excl tax, duties and fees
Eclipse No.34 Butt Gauge [Vintage]Eclipse No.34 Butt Gauge [Vintage]
Last Ones!
Eclipse No.34 Butt Gauge [Vintage]
Good condition, clear markings, and all works freely. Imperial and metric markings.
USD $16.95 excl tax, duties and fees
1/2'' Lock Mortise Chisel [Vintage]1/2'' Lock Mortise Chisel [Vintage]
Revised
1/2'' Lock Mortise Chisel [Vintage]
A nice, socketed lock 1/2" wide mortise chisel with oak handle. 21” overall. No markers mark. Very good condition.
USD $27.11 excl tax, duties and fees
7 Excellent Paring Gouges – Marples & Ibbotson [Vintage]7 Excellent Paring Gouges – Marples & Ibbotson [Vintage]
Special Offer
7 Excellent Paring Gouges – Marples & Ibbotson [Vintage]
Featuring famous makers from Sheffield, England - William Marples & Sons (5 of the 7) and Thomas Ibbotson (2). Did you know that Marples acquired Thomas Ibbotsons assets in 1905? – nor did we! A mix of long paring gouges with different handle styles and wood species, all with ferrules and virtually no defects (just one very short crack in one handle). A very tactile bunch of gouges. Overall...
USD $67.78 excl tax, duties and fees
Brusso Stainless Steel Hinges – CB302S [Clearance]Brusso Stainless Steel Hinges – CB302S [Clearance]
Revised
Brusso Stainless Steel Hinges – CB302S [Clearance]
Brusso Hardware (USA) discontinued a lot of their range over the last few years. Most of their range of stainless hinges left their portfolio but we have a few pairs left (5 pairs) in stock. These are new. The Brusso CB-302 full mortice butt hinge, measures 1¼" x 13/16". Length: 1.250" - 1¼" - 32mm Width: 0.802" - 13/16" - 21mm Leaf Thickness: 0.086" - 5/64" - 2mm NOTE - All Brusso hinges...
USD $54.22 excl tax, duties and fees
Brusso Stainless steel shelf support K-10S [Clearance]Brusso Stainless steel shelf support K-10S [Clearance]
Revised
Brusso Stainless steel shelf support K-10S [Clearance]
The K-10S stainless steel shelf support pin comprises a decorative turned support and a cylindrical peg. Stainless steel gives the pin a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The peg measures 1/4" in diameter x 3/8" deep, and the support projects 7/16". Supplied as a set of 4 – you are buying 2 sets (8 shelf support...
USD $61.00 excl tax, duties and fees
Veritas PM-V11 – 2'' Blade [Preowned, As New]Veritas PM-V11 – 2'' Blade [Preowned, As New]
Special Offer
Veritas PM-V11 – 2'' Blade [Preowned, As New]
This is a straight replacement iron for a Veritas No.4 or No.5 ¼ hand plane or can be fitted to Stanley or Record No.4 or No.5 bench planes.. The blade is slightly thicker than the old Record & Stanley planes so some minor adjustment made be necessary to the mouth and the pawl. Pre-owned but appears unused. 1/10” thick. PM-V11 blade. Normally selling for about £62...
USD $50.84 excl tax, duties and fees
Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]
Last Ones!
Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]
This is old stock from the early days of starting up Classic Hand Tools. Sanderson Hardware are still going in California. (Note - these cotter pins are different to what they offer now). The diameter of the ring pull is 3/4". The rod stock is 1/8" diameter and 2 1/4” ong . The square plate is ¾” x 5/8” with 4 screw holes (screws provided). The plate has...
USD $13.56 excl tax, duties and fees
3 Vintage Rabone Measuring Tools - Imperial [Preowned]3 Vintage Rabone Measuring Tools - Imperial [Preowned]
Special Offer
3 Vintage Rabone Measuring Tools - Imperial [Preowned]
A 33 feet Rabone steel tape No.435 - brass winder. A 100 feet Rabone steel tape No.4351 - brass winder. A Rabone No.1377 Boxwood 2 foot 4 fold rule with brass tips and hinge. All are in crisp condition for their age.
USD $22.59 excl tax, duties and fees
File Sets
30%
OFF
Percent Off
File Sets
The RH Preyda File Sets, made from prized Arkansas Novaculite, are essential for deburring, chamfering, and creating smooth finishes. These files are highly valued by craftsmen such as gunsmiths, dentists, machinists, and jewelers. File shapes: Round, Square, Triangular, and Knife Blade Size: 4" x 3/8" (101.6mm x 9.5mm) Grit options: Soft (400-600), Surgical Black (4000-6000), Translucent...
Was $69.14 Now from $48.39 excl tax, duties and fees
Stanley No.71 Router in fitted box – superb condition [Preowned, SOLD]Stanley No.71 Router in fitted box – superb condition [Preowned, SOLD]
Sold
Stanley No.71 Router in fitted box – superb condition [Preowned, SOLD]
Probably unused. 98% nickel plating remains. 3 cutters: 1/4'' & 1/2'' straight and 1/2'' spear cutter. Correct straight/curved fence. Instruction sheet. Made in England. Fitted box. With additional, owner made, wooden base (not currently fitted so can be dicaared if not of use).
USD $152.51 excl tax, duties and fees
Tite-Mark LONG – Glen Drake / Lie-Nielsen Toolworks [Preowned, SOLD]Tite-Mark LONG – Glen Drake / Lie-Nielsen Toolworks [Preowned, SOLD]
Sold
Tite-Mark LONG – Glen Drake / Lie-Nielsen Toolworks [Preowned, SOLD]
Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with a brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark...
USD $107.32 excl tax, duties and fees
2 Bessey UniKlamps – 300mm [Clearance, SOLD]
Sold
2 Bessey UniKlamps – 300mm [Clearance, SOLD]
New - Unused – (a mistake on our ordering!) Throat depth 80mm Jaw width 30mm Rail – 20mm x 5mm
USD $33.89 excl tax, duties and fees
Veritas Box Makers Plough Plane (Right Hand) [Preowned, SOLD]Veritas Box Makers Plough Plane (Right Hand) [Preowned, SOLD]
Sold
Veritas Box Makers Plough Plane (Right Hand) [Preowned, SOLD]
Used sparingly. This plane is based upon the Record 043 Plough Plane which was produced during the heydays of British manufacturing. An ideal tool for making grooves in boxes and small drawers, this compact plough plane excels at precise grooving and beading applications on small workpieces. 5 1/2" (140mm) long cast-iron body and weighing just 1 lb 7 oz (650 grams), it is highly manoeuvrable...
USD $124.26 excl tax, duties and fees
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | Last