Record 00 - Vice [Preowned, SOLD]Record 00 - Vice [Preowned, SOLD]
Sold
Was £42.00 Now £36.00 inc VAT

Lie Nielsen Replacement Blade for a No.10 ¼ [Pre-owned, As New, SOLD]Lie Nielsen Replacement Blade for a No.10 ¼ [Pre-owned, As New, SOLD]
Sold
Lie Nielsen Replacement Blade for a No.10 ¼ [Pre-owned, As New, SOLD]
Thi is a replacement or spare blade for a Lie-Nielsen 10 1/4 rebate plane. It is an unused replacement blade for a coachmakers rebate plane (favoured by our timber framing friends amongst others). A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. L-N heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat...
£75.00 inc VAT
Lie-Nielsen No.9 Mitre Plane [Pre-owned, SOLD]Lie-Nielsen No.9 Mitre Plane [Pre-owned, SOLD]
Sold
Lie-Nielsen No.9 Mitre Plane [Pre-owned, SOLD]
Lie-Nielsen Toolworks No.9 Complete with hot dog handle (annodised aluminium) This discontinued plane from the famous Lie-Nielsen Tooworks is as new. A very sought after plane. Original box. Full iron. Presents as new with minimal cosmetic tarnishing..95 per cent fine. Primarily designed for shooting mitres (90-degree shooting), but versatile enough for long-grain and cross-grain...
£875.00 inc VAT

Lie-Nielsen Toolworks - 102 Block plane with White Bronze lever cap [New]Lie-Nielsen Toolworks - 102 Block plane with White Bronze lever cap [New]
Sold
Lie-Nielsen Toolworks - 102 Block plane with White Bronze lever cap [New]
Please READ this first.. Note - this plane has a white bronze lever cap - the body is standard manganese bronze (in 2019 Lie-Nielsen prduced an all white bronze version of the 102 - this is NOT that plane) New, in original packaging in Lie-Nielsen box. This is the same plane as the extremely popular 102 low angle block plane on offer today but with a white phosphor bronze lever cap. That...
£195.00 inc VAT
Lie-Nielsen Toolworks - No.2 Bronze bodied smoothing plane [Pre-owned, SOLD]Lie-Nielsen Toolworks - No.2 Bronze bodied smoothing plane [Pre-owned, SOLD]
Sold
Lie-Nielsen Toolworks - No.2 Bronze bodied smoothing plane [Pre-owned, SOLD]
Lie-Nielsen Toolworks No.2 bronze bodied snoothing plane with cherry handles. Original box. Nothing much to say other than this plane is in excellent condition. It has been handled and used a few times so has some minor scratch marks but they are minimal. Full iron. Bedrock type frog and lever cap. American cherry wood handles. Full length 1 5/8 inch blade with matching cap iron. 71/2...
£695.00 inc VAT

Lie-Nielsen Toolworks - Spare Blade for a skew block plane [Pre-owned, As New, SOLD]Lie-Nielsen Toolworks - Spare Blade for a skew block plane [Pre-owned, As New, SOLD]
Sold
Lie-Nielsen Toolworks - Spare Blade for a skew block plane [Pre-owned, As New, SOLD]
This is to fit a Lie-Nielsen skew block plane, it is unused but technically old stock having been bought a few months ago from a gentleman clearing his collection of tools. This fits a right handed LN 140 skew block plane only. New retail is £70 Cryogenically treated A-2 Tool Steel, hardened to Rockwell 60-62 and double tempered for long-lasting edge retention. Thickness: 3.2mm...
£50.00 inc VAT
2 Veneering Hammers [Vintage, SOLD]2 Veneering Hammers [Vintage, SOLD]
Sold
2 Veneering Hammers [Vintage, SOLD]
Little & Large - Used but very much still usable with good clean brass blades to hardwood bodies. Little - with 2” (50mm) brass blade Large- with 4 ¼” (110mm) brass blade. Crafstman made. The term hammer is a bit of a misnomer as the idea is to work from the centre of your piece and dragging the tool outwards, sealing the glued veneer to the substrate without bubbles/air...
£28.00 inc VAT

3 Lonely Auriou Carving Tools [New, SOLD]
Sold
3 Lonely Auriou Carving Tools [New, SOLD]
These are 3 remaining Auriou carving tools in our store. With Auriou Toolworks in France going through yet another re-incarnation it is certain that these Chris Pye designed carving tools will not be offered again. A bit random but a lovely threesome. Series 9 - 5mm and 8mm straight gouges. Allongee chisel (flared from bolster to cutting edge) 35mm. Octagonal ash handles. Brass tapered...
£135.00 inc VAT
36” Straight Rule [Rare, Vintage, SOLD]36” Straight Rule [Rare, Vintage, SOLD]
Special Offer
36” Straight Rule [Rare, Vintage, SOLD]
Made from beech with brass edges and ends, this is a lovely rule with clear markings on the upper face which has one bevelled edge. 36” long, ½” thick and 2 ¼” deep. So this is a heavy rule which was desirable so it didn't slide about. The person who owned it told Classic Hand Tools that is was used in aTailors shop. This is perfectly believable but it...
£48.00 inc VAT

5 Graduated Auriou Curved Sole Ironing Rasps [New, SOLD]5 Graduated Auriou Curved Sole Ironing Rasps [New, SOLD]
Sold
5 Graduated Auriou Curved Sole Ironing Rasps [New, SOLD]
Handlled ironing rasps from Auriou Toolworks, France. These are for right handers. 10mm wide - grain 12 15mm wide - grain 11 20mm wide- grain 10 25mm wide - grain 9 30mm wide grain 8 The length of the stitched underside is from 60mm - 90mm Grain means stitch or cut - the higher the number the finer the stitch of the teeth which are applied by the drop if a rasp makers hammer...
£300.00 inc VAT
A 1/2'' Lock Mortise Chisel [Vintage, SOLD]A 1/2'' Lock Mortise Chisel [Vintage, SOLD]
Sold
A 1/2'' Lock Mortise Chisel [Vintage, SOLD]
A very fine example of a vintage lock mortise chisel with stubby handle. Isaac Greaves Cast Steel 19 inches overall including the stubby but typical 1 1/2 inch handle.. As nice an example as we have had recently.
£24.00 inc VAT

A Family of J Rabone & Sons Engineers Spirit Levels [Vintage, SOLD]A Family of J Rabone & Sons Engineers Spirit Levels [Vintage, SOLD]
Sold
A Family of J Rabone & Sons Engineers Spirit Levels [Vintage, SOLD]
Baby level is 6” long by 1” wide by 1 1/4” high Mummy level is 7 ¾” long by 1 1/4” wide by 1 1/2””high Daddy level is 12 “ long by 1 ½” wide by 2 ½”high. Each have a protective rotating cover for the main horizontal vial. The small lateral horizontal vial and the short vertical vial bubbles are all working...
£75.00 inc VAT
Auriou Toolworks – Basic 17 Carving Tool Set [New, Clearance, SOLD]
Sold
Auriou Toolworks – Basic 17 Carving Tool Set [New, Clearance, SOLD]
Auriou no longer make these fabulous carving tools designed by English master carver Chris Pye about 15 years ago. Michel Auriou told us in 2024 that they will not be making these tools again, but we remained foolishly optimistic that he might change his mind but he has been proved correct. A 17 tool Basic Woodcarving Set comprising Straight gouge - Series 3 – 5, 8, 14, 20 & 26mm Straight...
£655.00 inc VAT

Auriou Toolworks – Lettercarving 14 Tool Set [New, Clearance, SOLD]
Sold
Auriou Toolworks – Lettercarving 14 Tool Set [New, Clearance, SOLD]
Auriou no longer make these fabulous carving tools designed by English master carver Chris Pye about 15 years ago. Michel Auriou decided in 2024 that they will not be making these tools again, but we remained foolishly optimistic that he might change his mind. Complete with a copy of an instruction guide for the letter carving tools written originally by Chris Pye. 14 tool Letter Carving Set...
£545.00 inc VAT
Auriou Woodcarving Tools – The Complete Works! 38 tools [New, Clearance, SOLD]
Sold
Auriou Woodcarving Tools – The Complete Works! 38 tools [New, Clearance, SOLD]
Auriou Toolworks (France) no longer make these fabulous carving tools designed by English master carver Chris Pye about 15 years ago. Michel Auriou told us in 2024 that they will not be making these tools again, but we remained foolishly optimistic that he might change his mind. He won't for various excellent reasons so we are confident in our description here. This is a complete set of all...
£1,495.00 inc VAT

Blue Spruce Carving Mallet - 13 oz [Pre-owned, As New, SOLD]Blue Spruce Carving Mallet - 13 oz [Pre-owned, As New, SOLD]
Sold
Blue Spruce Carving Mallet - 13 oz [Pre-owned, As New, SOLD]
Blue Spruce Toolworks - Mallet This has been sitting behind a bench on a shelf, unused for several years. Why? well when it arrived from Dave Jeske it didn't quite have the exceptional finish to the handle that we had come to expect so it wasnt ever offered out for sale. The head is made from infused maple and that is lovely. The ash handle is ever so lightly rough to the touch, much like...
£85.00 inc VAT
Boxed set of 6 bevel edge bench chisels - Two Cherries [Pre-owned, SOLD]Boxed set of 6 bevel edge bench chisels - Two Cherries [Pre-owned, SOLD]
Sold
Boxed set of 6 bevel edge bench chisels - Two Cherries [Pre-owned, SOLD]
An unused set of 6 Two Cherries brand bevel edge chisels in fitted case. 6,10,12,16,20 & 26mm Made in Germany by Kirschen with shaped white beech handles, fitted with steel ferrules. Polished blades made from high carbon steel. Immaculate.
£115.00 inc VAT

Brusso Stainless Steel Hinges – CB302S [Clearance, SOLD]Brusso Stainless Steel Hinges – CB302S [Clearance, SOLD]
Sold
Brusso Stainless Steel Hinges – CB302S [Clearance, SOLD]
Brusso Hardware (USA) discontinued a lot of their range over the last few years. Most of their range of stainless hinges left their portfolio but we now have just 2 pairs left (from 5 pairs) in stock. These are new. The Brusso CB-302 full mortice butt hinge, measures 1¼" x 13/16". Length: 1.250" - 1¼" - 32mm Width: 0.802" - 13/16" - 21mm Leaf...
£45.00 inc VAT
Chairmakers Delight Mark II – Hand Brace with 9 Auger bits [Pre-owned, SOLD]Chairmakers Delight Mark II – Hand Brace with 9 Auger bits [Pre-owned, SOLD]
Sold
Chairmakers Delight Mark II – Hand Brace with 9 Auger bits [Pre-owned, SOLD]
Many of these auger bits are marked Clico (it is not unusual for these to be unmarked and to assume they are all from Clico Sheffield). Clico was a Sheffield manufacturer of high-quality woodworking and aeronautical tools. The woodworking arm of Clico (or part of it) was acquired by Thomas Flinn & Sons about a dozen years ago. High quality bits which cost a pretty penny back in the day.
£75.00 inc VAT

Chairmaker’s Delight Mark I – Hand Brace with Clico Spoon Bits [Pre-owned, SOLD]Chairmaker’s Delight Mark I – Hand Brace with Clico Spoon Bits [Pre-owned, SOLD]
Sold
Chairmaker’s Delight Mark I – Hand Brace with Clico Spoon Bits [Pre-owned, SOLD]
Clico (Sheffield) made superior quality products for the aeronautical industry and had a sideline in tools for woodworking (including Clifton planes) which were knowledgeably demonstrated at many woodworking shows by the enigmatic Mick Hudson for Clico, on the Classic Hand Tools stand. These spoon bits have seen little use. There are 8 bits including the tapered spoon bit. Clico 250 straight...
£85.00 inc VAT
Clifton 5 1/2 Jack Plane [New, SOLD]Clifton 5 1/2 Jack Plane [New, SOLD]
Sold
Clifton 5 1/2 Jack Plane [New, SOLD]
This is a mighty jack plane at 3.1kg and is the largest of the jack planes from Clifton. The 5 1/2 is regularly considered the go to plane for people starting out as it really is a versatile beastie.. The name ''jack plane'' comes from ''jack of all trades''. Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more...
£305.00 inc VAT

ECE Primus Block Plane - lignum vitae sole 649-P [Pre-owned, As New, SOLD]ECE Primus Block Plane - lignum vitae sole 649-P [Pre-owned, As New, SOLD]
Sold
ECE Primus Block Plane - lignum vitae sole 649-P [Pre-owned, As New, SOLD]
E. C. Emmerich Primus Adjustable Block Plane – THE POCKET PLANE NO.649-P This superb plane combines the convenience of a steel block plane with the feel and performance of a fine hardwood body. The 39mm iron is secured with a screw-tightened cap, & depth of cut is adjusted with a large knob which fits in the palm of the hand. 150mm long. Made in Germany Supplied with a spare...
£75.00 inc VAT
ECE Primus Improved Smooth Plane 711 – Cherry Body, lignum vitae sole [Pre-owned, SOLD]ECE Primus Improved Smooth Plane 711 – Cherry Body, lignum vitae sole [Pre-owned, SOLD]
Sold
ECE Primus Improved Smooth Plane 711 – Cherry Body, lignum vitae sole [Pre-owned, SOLD]
The ECE Primus Improved Smooth Plane (Model 711) is a premium German-made hand plane featuring a durable cherry body and a self-lubricating, wear-resistant lignum vitae sole. It features a unique, backlash-free metal mechanism for precise iron adjustment and a movable shoe that allows for a tight, adjustable throat, ideal for fine finishing on difficult grain. Adjustable Throat: The plane...
£125.00 inc VAT

ECE Primus Smooth Plane 704 – Beech Body [Pre-owned, SOLD]ECE Primus Smooth Plane 704 – Beech Body [Pre-owned, SOLD]
Sold
ECE Primus Smooth Plane 704 – Beech Body [Pre-owned, SOLD]
This ECE Primus Smooth Plane (Model 704) is a premium German-made hand plane featuring a durable beech body and a hornbeam sole. It features a unique, backlash-free metal mechanism for precise iron adjustment.. Key Features and Benefits: Primus Adjustment Mechanism: A metal mechanism allows for fine blade depth adjustment via a screw, eliminating the need for hammer blows. Body Construction:...
£85.00 inc VAT
Large Froe - Bristol Design - Made in Sheffield [Pre-owned, SOLD]Large Froe - Bristol Design - Made in Sheffield [Pre-owned, SOLD]
Sold
Large Froe - Bristol Design - Made in Sheffield [Pre-owned, SOLD]
Ray Iles from Lincolnshire makes this froe and the renowned tool shop, known as Bristol Design in Bristol, has it branded with their logo. Blade Length: 10½ inches. Material: EN9 spring steel. Beech Handle. Use for splitting logs, ideal for green woodworking and for making kindling for your stove or camp fire.
£48.00 inc VAT

Lovely shallow patternmakers gouge [Vintage, SOLD]Lovely shallow patternmakers gouge [Vintage, SOLD]
Sold
Lovely shallow patternmakers gouge [Vintage, SOLD]
This patternmakers gouge is 14 inches (300mm) long overall and 1 1/4 inches wide (30mm) It has a very shallow profile and a handsome rosewood handle with brass ferrule. It sits beautifully in your hand.
£35.00 inc VAT
Marples - 2 cracking chisels - Firmer & Mortise [Pre-owned, SOLD]Marples - 2 cracking chisels - Firmer & Mortise [Pre-owned, SOLD]
Sold
Marples - 2 cracking chisels - Firmer & Mortise [Pre-owned, SOLD]
A 3/8 inch (10mm) wide mortise chisel (13 1/2 inches - 350mm overall) & a 1 1/2inch (38mm) wide firmer chisel (325mm overall) These are lovely to hold and have seen very little use. It is the handles! Whilst slightly different, they are gorgeous! Boxwood with brass ferrules. Marples, with original trade labels.
£55.00 inc VAT

Matty Sears - Small Drawknife [Pre-owned, As New, SOLD]Matty Sears - Small Drawknife [Pre-owned, As New, SOLD]
Sold
Matty Sears - Small Drawknife [Pre-owned, As New, SOLD]
6” hand forged blade. This is a very sweetly balanced drawknife with fruitwood handles. It originates from Wales, UK from John Brown territory. We think ths was made by Matty Sears, one of John Brown's sons as it came to us from a near neighbour of Matty's when he lived in Wales. He advised us that he bought this and other tools featured in this months Friday Finds from Matty over...
£150.00 inc VAT
Matty Sears Hand Adze [Pre-owned, SOLD]Matty Sears Hand Adze [Pre-owned, SOLD]
Sold
Matty Sears Hand Adze [Pre-owned, SOLD]
Short handled carving adze, made by Matty Sears, son of legendary Welsh Chairmaker John Brown. Take time to read GOOD WORK The Chairmaking Life of John Brown by Christopher Williams. You will find written and pictorial reference to Matty Sears tools in this excellent read (available, co-incidentally from Classic Hand Tools). This adze features quite prominently in the book. The curve (see photo)...
£225.00 inc VAT

Matty Sears Inshave [Pre-owned, SOLD]Matty Sears Inshave [Pre-owned, SOLD]
Sold
Matty Sears Inshave [Pre-owned, SOLD]
This is sweet! Basically a bent version of his drawshave. This is in little used condition. Matty Sears is a toolmaker who learnt his skills in part from the legendary John Seymour (author of the fabulous Country Crafts) back in the 1960s. Matty made tools for his dad, John Brown whose life is written about in the Lost Art Press Publication "Good Work". In fact Matty has a chapter...
£175.00 inc VAT
Record 077A Bullnose Plane [Pre-owned, SOLD]Record 077A Bullnose Plane [Pre-owned, SOLD]
Sold
Record 077A Bullnose Plane [Pre-owned, SOLD]
A very neat example of this plane. The A in 077A means you can take of the front of the plane and use it as a chisel plane. It needs a buff up to bring ut back looking spick and span but 10 -15 mins should do this. Full blade, tight mouth.
£55.00 inc VAT

Record 077A Bullnose Plane [Pre-owned, SOLD]Record 077A Bullnose Plane [Pre-owned, SOLD]
Sold
Record 077A Bullnose Plane [Pre-owned, SOLD]
In superb condition. Tight mouth. The Record No. 077A is a vintage British-made bullnose rebate plane designed for fine woodworking, joinery, and trimming shoulders or tenons. Featuring a 1 1/18-inch wide blade, this tool allowed for high-accuracy, low-angle cutting. The mouth can be detached to turn this into a chisel plane.. Procuced mainly in the 40's and 50's. These often have...
Record 3 in 1 Shoulder Rebate Plane – Record 311 [Pre-owned, SOLD]Record 3 in 1 Shoulder Rebate Plane – Record 311 [Pre-owned, SOLD]
Sold
Record 3 in 1 Shoulder Rebate Plane – Record 311 [Pre-owned, SOLD]
This plane serves as a chisel plane, a bullnose plane and shoulder plane. The 2 attachments are matched to the main plane body and should have the same number stamped in them to ensure perfect matching (this plane has this). The bullnose attchment is tucked into the shoulder plane attachment as our photographer has ommited to photograph it separately (staff these days!) Cosmetic tarnishing but...
£98.00 inc VAT
Page: First | | 3 | 4 | 5 | 6 | 7 | 8 |