Category
Brand
Collection
Price
Additional Filters
319 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Verum 5 ½ Jack Plane, wheel marking gauge, screwdriver set & marking knife set [Pre-owned, SOLD]Verum 5 ½ Jack Plane, wheel marking gauge, screwdriver set & marking knife set [Pre-owned, SOLD]
Sold
Verum 5 ½ Jack Plane, wheel marking gauge, screwdriver set & marking knife set [Pre-owned, SOLD]
Verum bundle - save yourself £125!
£195.00 inc VAT
ECE MOVING FILLESTER [Pre-owned, SOLD]ECE MOVING FILLESTER [Pre-owned, SOLD]
Sold
ECE MOVING FILLESTER [Pre-owned, SOLD]
In near perfect condition. This ECE moving fillester Plane is used to cut rebates both across and with the grain. The hornbeam sole is married to the red beech body and measures 240mm (9 1/2'') x 54mm (2''). The adjustable steel fences set the width of the rebate to a maximum of 33mm (1 5/16''). Maximum depth is 23mm (7/8''). The nicker blade is made from high-speed...
£145.00 (VAT exempt)
ECE – PRIMUS Wooden Smoothing Plane – Model 711 [Pre-owned, SOLD]ECE – PRIMUS Wooden Smoothing Plane – Model 711 [Pre-owned, SOLD]
Sold
ECE – PRIMUS Wooden Smoothing Plane – Model 711 [Pre-owned, SOLD]
Please note: you have 15 minutes to complete checkout with this Friday Finds item. Thank you.
£75.00 inc VAT
Richard Kell Large Honing Guide (up to 2 5/8'') [Pre-owned, SOLD]Richard Kell Large Honing Guide (up to 2 5/8'') [Pre-owned, SOLD]
Sold
Richard Kell Large Honing Guide (up to 2 5/8'') [Pre-owned, SOLD]
Please note: you have 15 minutes to complete checkout with this Friday Finds item. Thank you.
£36.00 inc VAT
Hamilton Toolworks - Panel Gauge/Pencil Gauge [Pre-owned, SOLD]Hamilton Toolworks - Panel Gauge/Pencil Gauge [Pre-owned, SOLD]
Sold
Hamilton Toolworks - Panel Gauge/Pencil Gauge [Pre-owned, SOLD]
Curly Maple. 28” long x 8" fence. Just a few minor cosmetic dings. This is a fabulous looking tool and well as being rated the best panel gauge out there. Made in the USA by Jim Hamilton. Here’s what Jim says about this gauge… “The Hamilton Panel Gauge is a meticulously crafted, precision woodworking tool, designed for accurate line marking on various materials....
£225.00 (VAT exempt)
2 Marples Bevel Edge Paring Chisels [Pre-owned]2 Marples Bevel Edge Paring Chisels [Pre-owned]
Sold
2 Marples Bevel Edge Paring Chisels [Pre-owned]
These are lovely! Slender boxwood handled paring chisels 3/8" and 1/4" wide.Very good condition G++. Restored, flattened and sharpened. A commission sale.
£50.00 (VAT exempt)
David Finck Plane Blade Kit & Book [Pre-owned, SOLD]David Finck Plane Blade Kit & Book [Pre-owned, SOLD]
Sold
David Finck Plane Blade Kit & Book [Pre-owned, SOLD]
David Finck 1.75'' x 3.5'' plane blade assembly (very similar to the Ron Hock - Krenov style combos). Plane blade engraved DF with cap iron. New. PLUS Making & Mastering Wood Planes by David Finck. Revised edition, originally published by Sterling in 2005. Mint copy. A commission sale.
£50.00 (VAT exempt)
2 Beall Tool Co. Wood Threader Kits [Pre-owned, SOLD]
Sold
2 Beall Tool Co. Wood Threader Kits [Pre-owned, SOLD]
1" and 1 1/2". Each complete kit contains: Wood Threader Router Attachment, specially made Internal Threading Tap, complete hardware for attachments, carbide router bit and full instructions. Used very successfully but only once and as new. Note that the Beall Tool Co was sold to Lee Valley and these threader kits and spares are now sold by Classic Hand Tools. A commission sale.
£120.00 (VAT exempt)
Crown Carbide Pro Hollowing Turning Tool [Pre-owned, SOLD]Crown Carbide Pro Hollowing Turning Tool [Pre-owned, SOLD]
Sold
Crown Carbide Pro Hollowing Turning Tool [Pre-owned, SOLD]
Sheffield maker Crown Tools’ Hollowing Tool which features a 15mm replaceable carbide cutter. 355mm handle. Hardly used and in fine condition. This is available from retailers for a little over £110 so grab a little bargain here. A commission sale.
£80.00 (VAT exempt)
Crown & Henry Taylor Spindle Gouges [Pre-owned, As New, SOLD]Crown & Henry Taylor Spindle Gouges [Pre-owned, As New, SOLD]
Sold
Crown & Henry Taylor Spindle Gouges [Pre-owned, As New, SOLD]
2 famous Sheffield makers! The Crown spindle gouge is one from their M42 cyro range. 10mm wide. It has been sharpened but is unused. The Henry Taylor Spindle Gouge is 6mm, sharpened but unused. A commission sale.
£55.00 (VAT exempt)
2 pairs of Adjustable Hand Clamps by Dubuque, Ohio, USA. 'Moose Brand' [Pre-owned, As New, SOLD]2 pairs of Adjustable Hand Clamps by Dubuque, Ohio, USA. 'Moose Brand' [Pre-owned, As New, SOLD]
Sold
2 pairs of Adjustable Hand Clamps by Dubuque, Ohio, USA. 'Moose Brand' [Pre-owned, As New, SOLD]
The jaws are made with fine quality American hard maple. The spindles and swivel nuts are of cold drawn carbon steel. The Dubuque hand screw clamp is a versatile chap. The first pair: Jaw length: 10'' (250mm). Clamp opening: 7'' (175mm). The second pair: Jaw length: 4'' (100mm). Clamp opening: 2¼'' (56mm). Unused and fine condition. A...
£55.00 (VAT exempt)
Record 311 – Rebate, Chisel & Bullnose Plane [Pre-owned, SOLD]Record 311 – Rebate, Chisel & Bullnose Plane [Pre-owned, SOLD]
Sold
Record 311 – Rebate, Chisel & Bullnose Plane [Pre-owned, SOLD]
A very good crisp example of this plane which is now made by Thomas Flinn Sheffield under the Clifton Planes (Clifton 3110) brand for £245. Supplied with a well-made fitted case with a sliding lid. 7” overall, 1 1/8” wide blade. It will be difficult to find this plane elsewhere is such good condition.
£155.00 inc VAT
Chris Vesper Marking Knife [Pre-owned, SOLD]Chris Vesper Marking Knife [Pre-owned, SOLD]
Sold
Chris Vesper Marking Knife [Pre-owned, SOLD]
Chris Vesper of Australia is one of those makers who gets it right. He just doesn’t compromise on making sure his tools do exactly what they are supposed to, and that usually comes with a hefty price tag as the workmanship in his hand tool is legendary. When the Aussie dollar strengthened so much, it was simply too expensive for Classic Hand Tools to bring Chris’ tools into the UK (alongside...
£115.00 inc VAT
2 Ray Iles Mortise Chisels [Pre-owned, SOLD]2 Ray Iles Mortise Chisels [Pre-owned, SOLD]
Sold
2 Ray Iles Mortise Chisels [Pre-owned, SOLD]
Pre-owned but superbly cared for! So much so that the owner made a handsome box with a sliding lid to house these two beech handled mortise chisels made by Ray Iles of England. ¼” & 3/8” wide. 12” overall.
£185.00 inc VAT
Stanley No.79 (ENG) Side Rebate Plane [Pre-owned, SOLD]Stanley No.79 (ENG) Side Rebate Plane [Pre-owned, SOLD]
Sold
Stanley No.79 (ENG) Side Rebate Plane [Pre-owned, SOLD]
Probably unused, in original box this is a pre-owned item in near perfect condition. This 5 1/2" long side rebate plane was designed for cabinet makers to accurately trim dados, grooves, moulds etc. This useful plane has two skewed cutters set at a very low angle. The cutters are set in the plane with their bevel edges facing upwards. Keep these cutters sharp to get the best results. Full...
£48.00 inc VAT
Panel Raising Plane [Vintage, SOLD]Panel Raising Plane [Vintage, SOLD]
Sold
Panel Raising Plane [Vintage, SOLD]
A beech bodied panel raising plane with good 2 ¼'' skew iron by Greaves. The plane does not have a maker’s name but is well made and is in very good order. 8 ½'' long.
£40.00 inc VAT
Pair of No.12 Hollow & Round by John Moseley & Son [Vintage, SOLD]Pair of No.12 Hollow & Round by John Moseley & Son [Vintage, SOLD]
Sold
Pair of No.12 Hollow & Round by John Moseley & Son [Vintage, SOLD]
A nice pair! Hollows and rounds were made in matched pairs, thin ones marked No1 and widest ones generally stopped at No.18 (yes, we have seen a No.20 matched pair but that is rare) No.12's have cutters that are 3/4" wide. Wedges and irons in very good order. John Moseley was making planes in Broad Street from 1862-1894 (Source : Goodman, British Planemakers from 1700) There...
£25.00 inc VAT
1” Moving Fillester Plane by John Moseley & Son, London [Vintage, SOLD]1” Moving Fillester Plane by John Moseley & Son, London [Vintage, SOLD]
Sold
1” Moving Fillester Plane by John Moseley & Son, London [Vintage, SOLD]
This is a lovely fillester plane by John Moseley & Son, 54-55 Broad Street, Bloomsbury, London Beech with boxwood wear strip & nicker wedge. Good clear, crisp stamp. 9 ½” x 2” overall The original owner obviously coveted this plane as the initials “FGC” are stamped very boldly into the side of the plane. John Moseley was making planes in Broad...
£75.00 inc VAT
Starrett 150mm Dividers [Pre-owned, SOLD]Starrett 150mm Dividers [Pre-owned, SOLD]
Sold
Starrett 150mm Dividers [Pre-owned, SOLD]
In excellent condition Little used In the original Starrett box Starrett code 277–6
£68.00 inc VAT
Gramercy Dovetail Saw [Pre-owned, SOLD]Gramercy Dovetail Saw [Pre-owned, SOLD]
Sold
Gramercy Dovetail Saw [Pre-owned, SOLD]
9'' long rip cut, 19 ppi, dovetail saw which tapers from the toe for ease of use. American black walnut handle which affords a 3-finger grip, this is a lightweight saw that feels very comfortable in the hand. The saw plate is 0.018'' thick allowing for a narrow kerf. Hand filed with minimum set (approx. 0.003'') Brass backed. Made in the USA. This is pre-owned and...
£200.00 inc VAT
Stanley No.71 Router in fitted box – superb condition [Preowned, SOLD]Stanley No.71 Router in fitted box – superb condition [Preowned, SOLD]
Sold
Stanley No.71 Router in fitted box – superb condition [Preowned, SOLD]
Probably unused. 98% nickel plating remains. 3 cutters: 1/4'' & 1/2'' straight and 1/2'' spear cutter. Correct straight/curved fence. Instruction sheet. Made in England. Fitted box. With additional, owner made, wooden base (not currently fitted so can be dicaared if not of use).
£135.00 inc VAT
HSS 3-wing Deburring Tool and Handled Burnishing Rod - Clifton, Sheffield [Preowned, SOLD]HSS 3-wing Deburring Tool and Handled Burnishing Rod - Clifton, Sheffield [Preowned, SOLD]
Sold
HSS 3-wing Deburring Tool and Handled Burnishing Rod - Clifton, Sheffield [Preowned, SOLD]
Clifton haven’t made the high-speed steel deburring tool since being taken over by Thomas Flinn so this handsome tool is a little bit of a rarity. The burnishing tool is still offered today. Rosewood handles with brass ferules/collars (to protect your knuckles). Pre-owned but little used.
£60.00 inc VAT
Stanley 271 - Small Router Plane [Preowned, SOLD]Stanley 271 - Small Router Plane [Preowned, SOLD]
Sold
Stanley 271 - Small Router Plane [Preowned, SOLD]
A little used Stanley 271 small router plane Marked 'STANLEY No.271 MADE IN ENG' on the body of the plane. 1/4'' cutter which can be mounted for use as either an open or closed throat router. 3'' x 2'' overall. In original orange box with instruction leaflet.
£36.00 inc VAT
2 Bessey UniKlamps – 300mm [Clearance, SOLD]
Sold
2 Bessey UniKlamps – 300mm [Clearance, SOLD]
New - Unused – (a mistake on our ordering!) Throat depth 80mm Jaw width 30mm Rail – 20mm x 5mm
£30.00 inc VAT
Stonemasons Firesharp Chisels – 10 widths [Clearance, SOLD]Stonemasons Firesharp Chisels – 10 widths [Clearance, SOLD]
Sold
Stonemasons Firesharp Chisels – 10 widths [Clearance, SOLD]
10 double-hooped strong-as-an-ox stone masonry chisels made in France by Forge de Saint Juery home of Auriou Tool Works. Widths: 10, 15, 25, 30, 35 ,40, 45, 50, 55 & 60mm. 270mm overall length. New old stock. These wooden handled chisels are ideal for softer stone including alabaster, limestone and soapstone. When they are gone, they are gone! 3 sets available – you...
£240.00 inc VAT
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
Sold
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
11 Toothed Chisels: 10mm wide 3 pointed teeth 15mm wide 4 pointed teeth 20mm wide 5 pointed teeth 25mm wide 6 pointed teeth 30mm wide 7 pointed teeth 35mm wide 8 pointed teeth 40mm wide 9 pointed teeth 45mm wide 10 pointed teeth 50mm wide - 11 pointed teeth 55mm wide - 12 pointed teeth 60mm wide - 13 pointed teeth 270mm overall length. New old stock. Be advised...
£320.00 inc VAT
3 French Drags – Quality Stone Masons Tools [Clearance, SOLD]3 French Drags – Quality Stone Masons Tools [Clearance, SOLD]
Sold
3 French Drags – Quality Stone Masons Tools [Clearance, SOLD]
French drags are the equivalent of the plane in woodworking. They are used for soft stone and consist of 9 blades set at skewed angles over the length of a block of wood. 2 of these drags have toothed blades (straight and circular) to allow removal of surface material. The 3rd drag (30mm width) has toothless blades for smoothing out the surface of the stone. These 3 drags have the same overall...
£85.00 inc VAT
Lie-Nielsen Toolworks Dovetail Marker [Preowned, SOLD]Lie-Nielsen Toolworks Dovetail Marker [Preowned, SOLD]
Sold
Lie-Nielsen Toolworks Dovetail Marker [Preowned, SOLD]
This brass and rosewood dovetail maker from Lie-Nielsen Toolworks was a popular item back in the day before being discontinued. It seems to be even more popular now! We have sold several over the last 6 months and no doubt this will fly off the shelf. It has no box, has been lightly cleaned and is in very good condition.
£75.00 inc VAT
Lie Nielsen Toolworks – Bronze No. 4 Smoothing Plane [Preowned, SOLD]Lie Nielsen Toolworks – Bronze No. 4 Smoothing Plane [Preowned, SOLD]
Sold
Lie Nielsen Toolworks – Bronze No. 4 Smoothing Plane [Preowned, SOLD]
This is a pre-owned bronze LN No.4 in good ++ (G++) condition. Look here to see what we say about the brand-new version (which retails for £595) on our main LN section. This Lie-Nielsen's smoothing plane has a manganese bronze casting and has a beautifully formed handle and knob. It has the Stanley Bedrock style frog which gives a fully machined mating fit between the frog and body....
£445.00 inc VAT
Record 405 Multiplane [Preowned, SOLD]Record 405 Multiplane [Preowned, SOLD]
Sold
Record 405 Multiplane [Preowned, SOLD]
This plane has seen very little use at all and presents as almost new. It has its fitted box with wallet containing 24 cutters and instruction booklet. The cutters: 4, 6, 9 & 12mm plus 1/8'', 3/16'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 5/8'', 3/4'' & 7/8'' Plough & Dado cutters. 1/8'',...
£185.00 inc VAT
Record No.7 Jointer Plane (with Clifton Hand forged blade & 2 piece cap iron) [Preowned, SOLD]Record No.7 Jointer Plane (with Clifton Hand forged blade & 2 piece cap iron) [Preowned, SOLD]
Sold
Record No.7 Jointer Plane (with Clifton Hand forged blade & 2 piece cap iron) [Preowned, SOLD]
Pre-owned but in superb condition this plane has the considerable advantage of having been fitted with a Clifton hand forged blade and 2 piece cap iron. This plane has done very little planing. 21” overall with 2 3/8” wide blade. Stained beech handles. This plane is quite recent. Made in England.
£115.00 inc VAT
4 Ray Iles Mortise Chisels [Preowned, SOLD]4 Ray Iles Mortise Chisels [Preowned, SOLD]
Sold
4 Ray Iles Mortise Chisels [Preowned, SOLD]
Very little used these are very well made mortise chisels by legendary English tool maker Ray Iles. These do not find their way on the market very often as they are not any easy tool to make and Ray tends to send his production to Tools for Working Wood in the USA. So, these tools have been sparingly used. The beech handles are slightly rounded at the butt (by special request) to make them more...
£360.00 (VAT exempt)
No.9 Mitre Plane - Lie-Nielsen Toolworks [Preowned, SOLD]No.9 Mitre Plane - Lie-Nielsen Toolworks [Preowned, SOLD]
Sold
No.9 Mitre Plane - Lie-Nielsen Toolworks [Preowned, SOLD]
Pre-owned and used sparingly. This is the iron bodied version with the side handle. Later models had the option of a "hot dog" attachment which would still work with this model if you thought you needed it although this bad boy maybe heading to a collector. This discontinued beauty has marks of use. The sole is 90-95% free of any marks as are the side faces. This is not pristine,...
£625.00 inc VAT
2 Good Oval Handled Mortise Chisels 3/16'' & 3/8'' [Vintage, SOLD]
Sold
2 Good Oval Handled Mortise Chisels 3/16'' & 3/8'' [Vintage, SOLD]
These would be termed vintage. In fact, these 2 were made centuries ago! They are great tools with original handles (in good but slightly grubby condition which can easily be rectified with a bit of wax and elbow grease). The chisels are not heavily used and will give a few decades of service. These legendary Sheffiled toolmaking companies made these mortise chisels between the times stated. 3/16''...
£115.00 inc VAT
7 Pneumatic Stone Carving Tools - Auriou [Clearance, SOLD]7 Pneumatic Stone Carving Tools - Auriou [Clearance, SOLD]
Sold
7 Pneumatic Stone Carving Tools - Auriou [Clearance, SOLD]
Yes! The blacksmiths at legendary French artisan tool makers AURIOU TOOLWORKS also used to make tools for stone sculptors who use air powered chisels for their work. A bit noisy for us (and them maybe because they have stopped making them!) We have 3 gouges: 10mm wide, 15mm wide and 20mm wide. Also 2 snakes tongue (pied a biche) tools - for heavy shaping work (10 & 15mm wide) And 2 point...
£100.00 inc VAT
Lie-Nielsen Toolworks Dovetail Marker [Preowned, SOLD]Lie-Nielsen Toolworks Dovetail Marker [Preowned, SOLD]
Sold
Lie-Nielsen Toolworks Dovetail Marker [Preowned, SOLD]
This brass and rosewood dovetail maker from Lie-Nielsen Toolworks was a popular item back in the day before being discontinued. This is little used and has its original box with instruction leaflet.. A commission sale.
£75.00 (VAT exempt)
Woodworking Starter Set [Preowned, SOLD]Woodworking Starter Set [Preowned, SOLD]
Sold
Woodworking Starter Set [Preowned, SOLD]
Get yourself (or someone else started!) A Brass & Rosewood mortise gauge A Brass and rosewood 4'' square (Crown Tools) A Brass and rosewood 8'' bevel with lever lock. 3 bevel edged chisels: 3/8'' Marples 5/8'' Marples 1/2'' Ashley Iles A Record 4½ smoothing plane – that has seen little, if any, use. Stained beech...
£135.00 (VAT exempt)
Incra Stainless Steel Metric Rule Set [Preowned, SOLD]Incra Stainless Steel Metric Rule Set [Preowned, SOLD]
Sold
Incra Stainless Steel Metric Rule Set [Preowned, SOLD]
300mm, 150mm & 75mm long. These super slim Incra rules are extremely precise measuring aids as they have holes for precise marking allowing accuracy to 0.25mm In almost new condition. You’ll need a 0.5mm diameter lead in your pencil to fit the holes.
£30.00 inc VAT
Ulmia Layout Tools from Germany [Clearance, SOLD]Ulmia Layout Tools from Germany [Clearance, SOLD]
Sold
Ulmia Layout Tools from Germany [Clearance, SOLD]
We bought these in as samples to have a good look alongside the fantastic new range of squares and precision bevels we are now selling from ULMIA . New Ulmia Squares & Bevels Made from white beech these are a throwback to the days of basic wooden measuring tools and they are very nicely made indeed. 15cm square & a 33cm bevel with excellent locking finger nut. New - unused.
£33.00 inc VAT
Vintage Squares [Preowned, SOLD]Vintage Squares [Preowned, SOLD]
Sold
Vintage Squares [Preowned, SOLD]
All squared up? A selection of attractive vintage squares – all in G+ - G++ condition They probably aren’t super accurate, but they will be good enough for most DIY tasks should you chose to use them. However, cleaning these up (which we haven’t had time to do) will release the beauty of the wood and make the brass glisten like gold. A little bit of wire wool (medium) some...
£30.00 inc VAT
Stanley No.5 1/2 Jack Plane [Preowned, SOLD]Stanley No.5 1/2 Jack Plane [Preowned, SOLD]
Sold
Stanley No.5 1/2 Jack Plane [Preowned, SOLD]
Pre-owned in G++ condition. Attractive rosewood handles. A good user plane that has been well looked after. A commission sale.
£75.00 (VAT exempt)
Bespoke E. Garlick & Sons Lynx 14'' Tenon Rip Saw [Preowned, SOLD]Bespoke E. Garlick & Sons Lynx 14'' Tenon Rip Saw [Preowned, SOLD]
Sold
Bespoke E. Garlick & Sons Lynx 14'' Tenon Rip Saw [Preowned, SOLD]
A bespoke made rip cut 11tpi tenon saw with lovely walnut handle. This saw was made by Thomas Flinn & Co., saw and tool makers in Sheffield, England. This closed walnut handled LYNX tenon saw is 14'' (350mm) long. This heavy brass backed tenon saw is in G++ condition having been well cared for during its use. The steel plate is 3 1/8'' deep, a heavy brass back with...
£85.00 (VAT exempt)
Karl Holtey 2 1/8'' Plane Blade [Clearance, SOLD]Karl Holtey 2 1/8'' Plane Blade [Clearance, SOLD]
Sold
Karl Holtey 2 1/8'' Plane Blade [Clearance, SOLD]
Unused old stock. Stamped HOLTEY. Also stamped “s”. 4” overall. 2 1/8” wide. 3/16” thick. 4 positioning holes.
£40.00 inc VAT
Karl Holtey 2 1/4'' Plane Blade [Clearance, SOLD]Karl Holtey 2 1/4'' Plane Blade [Clearance, SOLD]
Sold
Karl Holtey 2 1/4'' Plane Blade [Clearance, SOLD]
Unused old stock. Stamped HOLTEY. Also stamped “2”. 9 1/8” overall. 2 ¼” wide. 3/16” thick. 7 positioning holes.
£60.00 inc VAT
EIGHT Henry Taylor Straight Carving Gouges [Clearance, SOLD]EIGHT Henry Taylor Straight Carving Gouges [Clearance, SOLD]
Sold
EIGHT Henry Taylor Straight Carving Gouges [Clearance, SOLD]
New current stock - a straight carving gouge bundle! Ok – we overstocked through our enthusiasm to promote this great British brand and then Henry Taylor slimmed down their overall offering of carving tools, so we decided to concentrate our future investment in woodcarving hand tools in Swiss maker Pfeil and USA maker Flexcut. No crying here but we are trying to get these remaining new tools...
£160.00 inc VAT
SEVEN Henry Taylor Straight Fishtail Gouges [Clearance, SOLD]SEVEN Henry Taylor Straight Fishtail Gouges [Clearance, SOLD]
Sold
SEVEN Henry Taylor Straight Fishtail Gouges [Clearance, SOLD]
New current stock. A fishtail bundle! Ok – so this is excess stock created through our enthusiasm to promote this great British brand a few years back. We still love these Henry Taylor carving tools but when HT slimmed down their overall offering, we were holding quite a lot (hundreds!) of carving tools. At that point we decided to concentrate our future investment in woodcarving hand tools...
£138.00 inc VAT
Paring chisels – 4 lovelies [Vintage, SOLD]Paring chisels – 4 lovelies [Vintage, SOLD]
Sold
Paring chisels – 4 lovelies [Vintage, SOLD]
Well looked after vintage paring chisels all with brass ferrules. Some bashing to the handles (crack to the largest size and a split to the 1” chisel but they are functional and fit for good use) Marples & Sons, Sheffield - 15 1/2” (390mm) overall – 8” (200mm) blade – 1 ¼” (32mm) wide bevel edge paring chisel Hearnshaw Brothers, Sheffield...
£84.00 inc VAT
Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]
Sold
Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]
This plane has seen good service for many decades and remains in good condition. The original Stanley Sweetheart blade has worn down to the last 3/4'' so we have fitted a 2 3/8'' HOCK A2 cyro replacement iron for you (the original iron will also come with the plane) Patent dates of MAR 25 - 02 AUG 19- 02 APR 19 – 10 Lovely rosewood handles.
£125.00 inc VAT
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 |