Category
Brand
Collection
Price
Additional Filters
294 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Steel Letter Stamps – 3/16” [Pre-owned, SOLD]Steel Letter Stamps – 3/16” [Pre-owned, SOLD]
Sold
Steel Letter Stamps – 3/16” [Pre-owned, SOLD]
In original metal case. Made in England. Crisp! About 2 ½” long.
£25.00 inc VAT
Ray Iles Inshave [Pre-owned, SOLD]Ray Iles Inshave [Pre-owned, SOLD]
Sold
Ray Iles Inshave [Pre-owned, SOLD]
The Ray Iles Inshave (scorp) has steamed beech handles with brass ferrules. This tool is basically a semi-circular drawknife with an 8" blade. Pre-owned nut little used, this inshave has a few superficial blemish marks consistent with very light use. The edge is clean and sharp. Available new for £75
£50.00 inc VAT
12 Pfeil Carving Tools in Roll [Pre-owned, Great Condition, SOLD]12 Pfeil Carving Tools in Roll [Pre-owned, Great Condition, SOLD]
Sold
12 Pfeil Carving Tools in Roll [Pre-owned, Great Condition, SOLD]
Save £115 on brand new prices!
£244.00 inc VAT
A lovely upholsterers strapped hammer [Vintage, SOLD]A lovely upholsterers strapped hammer [Vintage, SOLD]
Sold
A lovely upholsterers strapped hammer [Vintage, SOLD]
12 1/2” overall with 4 ¼” strap. The head is 5 1/4” wide with a ½” round face with a flat claw pane. Oak handle A beautifully balanced hammer designed for nailing leather and cloth to furnitures and for saddlery.
£35.00 inc VAT
A nicely refurbished 1 ½” bevel edged paring chisel – Mawhood, Sheffield [Vintage, SOLD]A nicely refurbished 1 ½” bevel edged paring chisel – Mawhood, Sheffield [Vintage, SOLD]
Sold
A nicely refurbished 1 ½” bevel edged paring chisel – Mawhood, Sheffield [Vintage, SOLD]
15” overall Lovely handle with brass ferrule. Mawhood Bothers produced fine edge tools in Sheffield up to about 1980. Their Palm Tree brand has the distinctive stamp of a plam tree in this chisel body.
£44.00 inc VAT
Stanley 79 Double-sided Rebate Plane [Pre-owned, SOLD]Stanley 79 Double-sided Rebate Plane [Pre-owned, SOLD]
Sold
Stanley 79 Double-sided Rebate Plane [Pre-owned, SOLD]
In superb condition. This also has an owner made bespoke wooden base to keep it safely housed. The best example of thus plane we have seen.
£75.00 inc VAT
Stanley 78 Rebate plane [Pre-owned, SOLD]Stanley 78 Rebate plane [Pre-owned, SOLD]
Sold
Stanley 78 Rebate plane [Pre-owned, SOLD]
Unused in original cardboard box.
£45.00 inc VAT
GTL Smoothing Plane [Pre-owned, SOLD]GTL Smoothing Plane [Pre-owned, SOLD]
Sold
GTL Smoothing Plane [Pre-owned, SOLD]
This is a Smoothing Plane with brass body and beech handles. 2" wide blade. In very good condition.
£35.00 inc VAT
Elwell Hand Hatchet – 1 1/2 lbs head [Pre-owned, SOLD]Elwell Hand Hatchet – 1 1/2 lbs head [Pre-owned, SOLD]
Sold
Elwell Hand Hatchet – 1 1/2 lbs head [Pre-owned, SOLD]
An Elwell British Classic!
£45.00 inc VAT
Stanley No.50 Plow Plane [Pre-owned, As New, SOLD]Stanley No.50 Plow Plane [Pre-owned, As New, SOLD]
Sold
Stanley No.50 Plow Plane [Pre-owned, As New, SOLD]
Almost perfect condition. Unused in original box with cutters.
£75.00 inc VAT
Stanley No.8 Hollow & Round bases with cutters for combination plane [Pre-owned, SOLD]Stanley No.8 Hollow & Round bases with cutters for combination plane [Pre-owned, SOLD]
Sold
Stanley No.8 Hollow & Round bases with cutters for combination plane [Pre-owned, SOLD]
These are not so easy to come across in such good condition. Designed to fit the Stanley 45 & 55 Combination planes.
£60.00 inc VAT
Rabone Chesterman Engineers Spirit Level on hardwood base [Vintage, SOLD]Rabone Chesterman Engineers Spirit Level on hardwood base [Vintage, SOLD]
Sold
Rabone Chesterman Engineers Spirit Level on hardwood base [Vintage, SOLD]
12 “ long by 1 ½” wide by 2 ½”high (without the wooden base) this all metal engineers’ level is an impressive ornament for your desk if nothing else. Its main horizontal vial has a brass cover that rotates to protect the bubble which is in perfect working order. The brass cover elevates this level somewhat in terms of its attractiveness. The small lateral...
£66.00 inc VAT
Stanley No.10 Rebate Plane [Pre-owned, SOLD]Stanley No.10 Rebate Plane [Pre-owned, SOLD]
Sold
Stanley No.10 Rebate Plane [Pre-owned, SOLD]
Popular with timber framers and the like. This plane is ready to work. Stanley England. Original iron. Very good condition with slight chip at corner of the mouth 1/16” (1.5mm). Priced to sell quickly!
£65.00 inc VAT
Edward Preston Bullnose Plane [Pre-owned, SOLD]Edward Preston Bullnose Plane [Pre-owned, SOLD]
Sold
Edward Preston Bullnose Plane [Pre-owned, SOLD]
Edward Preston Bullnose Rebate Plane Manufactured:From 1933 to 1994 Length:4 inches Weight:1-1/4 pounds Cutter Width:1-1/8 inches Construction:Cast iron body. Tungsten steel cutter This has the detachable front piece which means you can convert this to a chisel plane if required. Original good iron with plenty of life left (5/8”) Good square mouth.
£54.00 inc VAT
Record Bullnose No.077A [Pre-owned, SOLD]Record Bullnose No.077A [Pre-owned, SOLD]
Sold
Record Bullnose No.077A [Pre-owned, SOLD]
In excellent condition G++ - Fine Full iron. Super clean.
£66.00 inc VAT
Record No10H & No10R Special Bases with cutters for Record No.405 [Pre-owned, SOLD]Record No10H & No10R Special Bases with cutters for Record No.405 [Pre-owned, SOLD]
Sold
Record No10H & No10R Special Bases with cutters for Record No.405 [Pre-owned, SOLD]
Special bases were available for the Record No. 405 Multi-Plane: A Hollow and its cutter would form a round, and a Round and its cutter would form a hollow. Hollows and Rounds were sold in sets, comprising 1 Hollow, 1 Round and 2 cutters. No. 6 Hollow and Round – 1/2 inch cutter width – works circles of 3/4 inch No. 8 Hollow and Round – 5/8 inch cutter width – works...
£75.00 inc VAT
Edward Preston Large Shoulder Plane [Pre-owned, SOLD]Edward Preston Large Shoulder Plane [Pre-owned, SOLD]
Sold
Edward Preston Large Shoulder Plane [Pre-owned, SOLD]
In super working order, this heavy-duty shoulder plane has good life left in the iron. 1 ¼” wide and 8 1/4” long. Good mouth. You can read all about Preston Shoulder planes at Preston Tool Reviews website An excellent alternative to the current new offerings by Lie Nielsen, Veritas & Clifton. A good percentage of the original nickel plating has worn due to use.
£125.00 inc VAT
Stanley Bedrock No.7 Jointer Plane [Vintage, SOLD]Stanley Bedrock No.7 Jointer Plane [Vintage, SOLD]
Sold
Stanley Bedrock No.7 Jointer Plane [Vintage, SOLD]
22” square sided Stanley Bedrock Jointer plane for finishing large surfaces and for trueing up the edges of boards so that they can be closely fitted or joined together. Markings as follows Bedrock is cast into the plane body ahead of the front knob. Bedrock is cast into the cap iron. No 607 (at rear of plane) and just behind the frog themselves is in the casting PATD APR 2...
£195.00 inc VAT
Record 042 Shoulder plane [Pre-owned, SOLD]Record 042 Shoulder plane [Pre-owned, SOLD]
Sold
Record 042 Shoulder plane [Pre-owned, SOLD]
 Excellent 19mm wide Record Shoulder Plane
£104.00 inc VAT
A Stanley Bailey (USA) No. 8 Jointer Plane [Pre-owned, SOLD]A Stanley Bailey (USA) No. 8 Jointer Plane [Pre-owned, SOLD]
Sold
A Stanley Bailey (USA) No. 8 Jointer Plane [Pre-owned, SOLD]
24” long with 2 5/8” wide original (thin) cutter with 1 1/2” life left before you need to invest in a replacement blade (we sell these!) A very good example of this jointer plane with original rosewood handle and front knob in very good condition. Production of this plane stopped in 1958 and we think this is a type 14 which dates it to 1939-1940. At over 85 years old, this super...
£195.00 inc VAT
A 2” wide firmer chisel by Mathieson – Glasgow [Vintage, SOLD]A 2” wide firmer chisel by Mathieson – Glasgow [Vintage, SOLD]
Sold
A 2” wide firmer chisel by Mathieson – Glasgow [Vintage, SOLD]
Warranted cast steel. Steel hooped oak handled firmer chisel by famous Scottish maker Mathieson (note – take care with the hoop and it has an edge caused by being struck repeatedly which requires a bit of rounding off, a 3 minute job) 12 ½” overall. Blade life is 4”
£42.00 inc VAT
Record 405 Multi Plane [Vintage, SOLD]Record 405 Multi Plane [Vintage, SOLD]
Sold
Record 405 Multi Plane [Vintage, SOLD]
A little used Record 405 in its original box, complete with a full set of cutters and instruction booklet. This Record Planes online resource is a great place to look and learn about this plane. Note this plane comes with 23 standard cutters. 11 plough and dado cutters 2 match cutters 1 sash cutter 1 slitting cutter 1 fillister cutter 7 beading cutters In original fitted...
£175.00 inc VAT
Marples Lock Mortise Chisel [Vintage, SOLD]Marples Lock Mortise Chisel [Vintage, SOLD]
Sold
Marples Lock Mortise Chisel [Vintage, SOLD]
18” overall length with stubby 4 “ handle. All in great order. A steal!
£28.00 inc VAT
J Rabone & Sons Steel and Brass 12” decorative Machinists Spirit Level [Vintage, SOLD]J Rabone & Sons Steel and Brass 12” decorative Machinists Spirit Level [Vintage, SOLD]
Sold
J Rabone & Sons Steel and Brass 12” decorative Machinists Spirit Level [Vintage, SOLD]
An attractive steel and brass level with 3 good clear working vials. The japanning (the black paint) is in excellent order – a nice decorative and functional tool..
£60.00 inc VAT
W.Marples & Sons 2” wide bevel edge chisel [Vintage, SOLD]W.Marples & Sons 2” wide bevel edge chisel [Vintage, SOLD]
Sold
W.Marples & Sons 2” wide bevel edge chisel [Vintage, SOLD]
12 1/2” overall this is a lovely chisel that has a hefty hardwood handle. There is over 4“ of blade left to wear out (good luck with that!) In very good condition, no pitting, good clean edge. Small split to brass ferrule but the ferrule will hold.
£38.00 inc VAT
Stanley Rule & Level Co. No.113 Compass Plane [Pre-owned, SOLD]Stanley Rule & Level Co. No.113 Compass Plane [Pre-owned, SOLD]
Sold
Stanley Rule & Level Co. No.113 Compass Plane [Pre-owned, SOLD]
This is in very good order with original Stanley iron. The sole moves adjust freely. There is a small indent at one edge of the sole (very small indeed but we do try to be very accurate in our descriptions). This indent (1mm) is outside the edge of the planning track and we do not think this would affect performance.
£125.00 inc VAT
1/2” Mortise Chisel – Brades & Co. [Pre-owned, SOLD]1/2” Mortise Chisel – Brades & Co. [Pre-owned, SOLD]
Sold
1/2” Mortise Chisel – Brades & Co. [Pre-owned, SOLD]
As good as you’ll get if you want an old-style oval handles mortise chisel. This bad boy hasn’t done any work we think.
£30.00 inc VAT
6 Pattermakers gouges [Vintage, SOLD]6 Pattermakers gouges [Vintage, SOLD]
Sold
6 Pattermakers gouges [Vintage, SOLD]
These are well looked after patternmakers cranked paring gouges. Different makers and non-matching handles. These came from a pattern maker in the West Midlands area of England. A pattern maker is often referred to as the “king of trades” and whenever we get hold of pattern makers hand tools they are generally in very good condition, as is the case here. 12” “ to 16“...
£66.00 inc VAT
Record 071 Router Plane [Pre-owned, SOLD]Record 071 Router Plane [Pre-owned, SOLD]
Sold
Record 071 Router Plane [Pre-owned, SOLD]
Complete with 3 cutters, depth stop and fence.
£105.00 inc VAT
Norris A5 Smoothing Plane – original box [Vintage, SOLD]Norris A5 Smoothing Plane – original box [Vintage, SOLD]
Sold
Norris A5 Smoothing Plane – original box [Vintage, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£425.00 (VAT exempt)
Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]
Sold
Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this rare item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£325.00 inc VAT
Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New, SOLD]Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New, SOLD]
Sold
Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this rare item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£325.00 inc VAT
Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]
Sold
Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare, SOLD]
You may only have 30 minutes to complete your purchase after you have entered this item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£480.00 inc VAT
6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]
Sold
6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]
Attractive French Walnut handles for chisels, rasps etc. 5" overall (125mm) with 3/4" diameter ferrule, rounded profile with waist. The handles are pre-drilled with a 4mm diameter hole about 12mm deep. Clear lacquer finish. New old stock.
£35.00 inc VAT
Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New, SOLD]Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New, SOLD]
Sold
Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New, SOLD]
2 3/8" wide Rob Cosman IBC plane & cap iron Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.140 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while the sides are precision-ground square to the bevel and hand-polished for optimal performance. Unused but...
£65.00 inc VAT
3 Henry Taylor Fishtail Carving Gouges [New, Clearance, SOLD]
Sold
3 Henry Taylor Fishtail Carving Gouges [New, Clearance, SOLD]
Last Ones!
£45.00 inc VAT
5 Henry Taylor Straight Carving Gouges [New, Clearance, SOLD]
Sold
5 Henry Taylor Straight Carving Gouges [New, Clearance, SOLD]
Last 3 sets!
£75.00 inc VAT
Lamello Minispot G2a [Clearance, As New, SOLD]Lamello Minispot G2a [Clearance, As New, SOLD]
Sold
Lamello Minispot G2a [Clearance, As New, SOLD]
G2A is the Minispot grooving machine for cutting out knots, resin pockets or damaged areas with patch size 2. The movable cover allows the groove to be cut very close to the rabbet edge, without the material thickness of the base plate coming into play. The transparent rear cover enables accurate positioning of the G2A over the relevant area, thus ensuring a perfect repair. We are not sure...
£245.00 inc VAT
Lamello Top 20 S2 Biscuit Jointer [Clearance, As New, SOLD]Lamello Top 20 S2 Biscuit Jointer [Clearance, As New, SOLD]
Sold
Lamello Top 20 S2 Biscuit Jointer [Clearance, As New, SOLD]
Lamello Top 20 S2 Biscuit Jointer - New Old stock The Top 20S is considered superior to standard biscuit jointers for precision work, especially when using its adjustable height stop for parallel alignment. We have had this in our stock room for at least a decade. It has been quietly sitting in its original box, doing absolutely nothing at all. The winter months clean continues at Classic...
£395.00 inc VAT
Record No.3 Engineers Vice [Pre-owned, SOLD]Record No.3 Engineers Vice [Pre-owned, SOLD]
Sold
Record No.3 Engineers Vice [Pre-owned, SOLD]
UK mainland shipping only and excluding post codes AB31-56, BT 1-94, FK17-19, HS1-9, IM 1-99, IV1-63, KA, Kw1-9, PA 20-88, PH 15 - 50, PO 31-41, TR 21-25 & ZE1-3 and Guernsey & Jersey
£135.00 inc VAT
Clifton Anniversary Plane Set – 7 Planes [Rare, SOLD]Clifton Anniversary Plane Set – 7 Planes [Rare, SOLD]
Sold
Clifton Anniversary Plane Set – 7 Planes [Rare, SOLD]
A wonderful set of 7 Limited Edition Clifton Anniversary Planes 2010 – for users & collectors. This is one of just twelve full sets known to have been sold from this well respected Sheffield plane maker. (Note - Classic Hand Tools sold the vast majority of the planes when they were launched as a limited edition, so we are very confident of our numbers). You are buying a small slice...
£3,450.00 (VAT exempt)
Wood Sabre Metric Marking Gauge [Pre-owned, SOLD]Wood Sabre Metric Marking Gauge [Pre-owned, SOLD]
Sold
Wood Sabre Metric Marking Gauge [Pre-owned, SOLD]
This clever and very well-made marking gauge is made by JessEm Tool Company in Canada and normally retails for about £135. The Model number is 08803. The Wood Sabre Metric Marking Gauge from The JessEm Tool Company is machined out of high-quality stainless steel, 6061 aluminium and anodised for durability. The design allows the user to dial in their scribe line from 0 up to 150mm. The bevelled...
£75.00 inc VAT
Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]
Sold
Interesting Bevel Gear Drill with spirit level [Vintage, SOLD]
These bevel gear hand drills are very underrated examples of hand tool ingenuity. Our American friends seem to hold their clever design and functional efficiency in higher regard than user/collectors on this side of the pond (as they do wrenches and other seemingly simple tools). Fun to use. Note: there is a spring missing in the jaw mechanism, so clamping is slightly assymetric, but still central....
£24.00 inc VAT
Mortise & Tenon Magazine – Individual Editions, 1, 2 & 3 [Clearance, SOLD]
Sold
Mortise & Tenon Magazine – Individual Editions, 1, 2 & 3 [Clearance, SOLD]
These magazines were combined into a compound hardback book Mortise & Tenon Issued 1-3 about 3 years ago. These are individual copies in excellent (unread) condition. Issue 1 Mortise & Tenon Magazine 2016 Issue 2 Mortise & Tenon Magazine 2016 Issue 3 Mortise & Tenon Magazine 2017
£75.00 inc VAT
Bessey Uni-Clamps - 4 Pack - 600mm [Clearance, UK mainland only, SOLD]
Sold
Bessey Uni-Clamps - 4 Pack - 600mm [Clearance, UK mainland only, SOLD]
UK mainland shipping only and excluding post codes AB31-56, BT 1-94, FK17-19, HS1-9, IM 1-99, IV1-63, KA, Kw1-9, PA 20-88, PH 15 - 50, PO 31-41, TR 21-25 & ZE1-3 and Guernsey & Jersey
£80.00 inc VAT
Scooped Adze by Muller – Austria [Clearance, SOLD]Scooped Adze by Muller – Austria [Clearance, SOLD]
Sold
Scooped Adze by Muller – Austria [Clearance, SOLD]
New but the edge needs to be re-sharpened. Great for hollowing and shaping. 450mm overall length with straight ash handle. 70mm wide cutting edge which is almost a semi circle. Normally retails for £103
£65.00 inc VAT
Record 050 Combination Plane [Pre-owned, As New, SOLD]Record 050 Combination Plane [Pre-owned, As New, SOLD]
Sold
Record 050 Combination Plane [Pre-owned, As New, SOLD]
Never used. All in 90-100% as new condition (just the long bars are a little scruffy). Original tatty box but pretty much everything else including all the 18 cutters are in unused, untarnished condition. Instruction booklet.
£125.00 inc VAT
Preston Flat Soled Spokeshave – Nickel Plated [Vintage, SOLD]Preston Flat Soled Spokeshave – Nickel Plated [Vintage, SOLD]
Sold
Preston Flat Soled Spokeshave – Nickel Plated [Vintage, SOLD]
This attractive shave is the Preston 1391 shave with 2'' blade Original Preston iron with plenty of life left. .10'' overall. A very attractive which presents well with all original parts. A commission sale.
£75.00 (VAT exempt)
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 |