Category
Brand
Collection
Price
Additional Filters
562 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Pair of Lie-Nielsen Drawbore Pins [Pre-owned]Pair of Lie-Nielsen Drawbore Pins [Pre-owned]
Revised
Pair of Lie-Nielsen Drawbore Pins [Pre-owned]
Drawboring is a great way to make a strong mechanical joint. A wooden pin is hammered through slightly offset holes in the two pieces, and pulls the joint together. You use Drawbore Pins to pull the joint together first (with some force and a twisting motion). This eases the edges of the hole, making driving the wood pin easier. You can also disassemble the joint if you want to work on the fit some...
EUR €136.44 excl tax, duties and fees
2 Veritas Scraper Plane Irons – Plain & Toothed [Pre-owned, As New]2 Veritas Scraper Plane Irons – Plain & Toothed [Pre-owned, As New]
2 Veritas Scraper Plane Irons – Plain & Toothed [Pre-owned, As New]
Pre-owned but probably unused. If you have this plane then these could be your spare blade and the useful toothing blade. These irons fit the No.112 style Veritas scraping plane. They are high carbon steel 7/8" wide, hardened to Rc48-51 with the cutting edges ground at 45°. The toothing iron has 25tpi with "v" shaped teeth. Senisbly priced. A commission sale.
EUR €56.85 excl tax, duties and fees
Bad Axe Saw (with Bog Oak handle) [Pre-owned]Bad Axe Saw (with Bog Oak handle) [Pre-owned]
Sold
Bad Axe Saw (with Bog Oak handle) [Pre-owned]
Well these are beauties indeed. Bad Axe Toolworks design through a collaboration between The London International Woodworking Festival short course organiser Derek Jones and Mark Harrell of Bad Axe. The open standard size handles to these saws are made from bog oak. The blade is long at 17" (430mm) and tapers from 50mm - 70mm deep We have 5 to sell. You are buying one saw. A commission...
EUR €250.14 excl tax, duties and fees
Norris No.20E Shoulder Plane [Rare, Vintage]Norris No.20E Shoulder Plane [Rare, Vintage]
Norris No.20E Shoulder Plane [Rare, Vintage]
This plane has been professionally restored although you wouldn't know this unless we told you as the restoration is perfectly done. The steel soled mouth is tight and true. Gunmetal body with lovely ebony infil and wedge. A very nice shoulder plane which bears the dings and marks of use. There is little left of the original Norris blade (clearly stamped with Norris London) hence the...
EUR €402.69 excl tax, duties and fees
Handsome Wooden Smoothing Plane with Hock blade [Pre-owned]Handsome Wooden Smoothing Plane with Hock blade [Pre-owned]
Handsome Wooden Smoothing Plane with Hock blade [Pre-owned]
Fraser like! This handsome plane needs to be put to work (just like Fraser!)
EUR €71.06 excl tax, duties and fees
Lie Nielsen Toolworks – 2 3/8” wide blade [Pre-owned, As New]Lie Nielsen Toolworks – 2 3/8” wide blade [Pre-owned, As New]
Lie Nielsen Toolworks – 2 3/8” wide blade [Pre-owned, As New]
In original opened packaging (not dated) To fit No, 4 ½, 5 1/2 , 6 & 7 planes. A2 steel.
EUR €52.11 excl tax, duties and fees
Stanley No.4 1/2 (with Clifton Replacement Blade & Hock Cap iron) [Pre-owned]Stanley No.4 1/2 (with Clifton Replacement Blade & Hock Cap iron) [Pre-owned]
Stanley No.4 1/2 (with Clifton Replacement Blade & Hock Cap iron) [Pre-owned]
This plane is a Stanley Bailey 4 ½ smoother that has a black japanned body and frog with stained beech replacement handle with high front knob (see trade label) and lever cap from Record . It also has the considerable benefit of a hand forged 2 3/8” wide replacement blade by Clifton, Sheffield. It also has a Hock cap iron. So, one very good plane made up of 4 famous names. A good...
EUR €96.65 excl tax, duties and fees
Veritas Low Angle Bevel Up Smoothing Plane (with 2x A2 blades) [Pre-owned]Veritas Low Angle Bevel Up Smoothing Plane (with 2x A2 blades) [Pre-owned]
Veritas Low Angle Bevel Up Smoothing Plane (with 2x A2 blades) [Pre-owned]
This is Veritas’ state-of-the-art pure smoothing plane. It is the plane to use for the final finish on surfaces, especially woods of difficult grain patterns. It also complements the low-angle jack plane. Veritas have combined the generous width and weight of a dedicated smoother with the versatile inner workings of a low-angle bevel-up plane. The plane has a 12° bed angle, and this...
EUR €255.83 excl tax, duties and fees
Japanese Marking & Layout Tool Bundle [Pre-owned]Japanese Marking & Layout Tool Bundle [Pre-owned]
Revised
Japanese Marking & Layout Tool Bundle [Pre-owned]
White oak marking gauge with matching double marking (mortise) gauge, a small awl, a marking knife and a wooden hammer. 5 separate tools all in G++ condition.
EUR €61.59 excl tax, duties and fees
Stanley No.6 Jack Plane & Record 4 ½ Smoother [Vintage]Stanley No.6 Jack Plane & Record 4 ½ Smoother [Vintage]
Revised
Stanley No.6 Jack Plane & Record 4 ½ Smoother [Vintage]
These pre-owned planes are in good usable condition. Wooden handles, high front knobs. English made. The soles are flat. They would suit for occasional use or as a budget friendly alternative to buying new. In our opinion they are superior to current Stanley and Record models. These probably date from the 80’s. There is plenty of life left in the blades (but you can always upgrade with...
EUR €80.54 excl tax, duties and fees
Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]
Revised
Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]
A recent, used Stanley No.80 Scraper plane with a new Hock replacement iron. The plane is in good order with 100% black japanning and a flat sole for the 2 3/8” sole.
EUR €56.85 excl tax, duties and fees
The Ward Collection – 4 Chisels & A Gouge [Vintage Sheffield edge tool making!]The Ward Collection – 4 Chisels & A Gouge [Vintage Sheffield edge tool making!]
Revised
The Ward Collection – 4 Chisels & A Gouge [Vintage Sheffield edge tool making!]
4 chisels and a magnificent gouge, all by Ward, Sheffield Ward & Payne 1 1/2” wide Firmer Chisel Refurbished 1 ½” wide chisel by Ward & Payne, Sheffield. Attractive London pattern boxwood handle and brass ferrule. Blade is 7” long, 16” overall. 1 ¼” wide bevel edge paring chisel by WARD W & P. Waisted round hardwood...
EUR €142.13 excl tax, duties and fees
RARE - 7 Cooper & Sons FULUSE Brand Chisels [Pre-owned]RARE - 7 Cooper & Sons FULUSE Brand Chisels [Pre-owned]
Revised
RARE - 7 Cooper & Sons FULUSE Brand Chisels [Pre-owned]
5 FULUSE bevel edge & 2 FULUSE firmer chisels, all with makers stamp or label on the handle. 3/16”, 3/8”, 5/8”, 1” & 1 3/8” FULUSE bevel edge chisels. 2 FULUSE registered firmer chisels – ¼” & 11/16” Made from superior forged high carbon steel by Sheffield maker Cooper & Sons who were in existence from 1930’s and...
EUR €112.56 excl tax, duties and fees
Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage]Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage]
Revised
Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage]
Despite many years of handling various gauges, we hadn’t seen this particular gauge before so we enjoyed playing with the adjustable tilting head. The clear patent dates on the reverse of the fence led us to the maker BATES of BLOOMSBURG OCT 20 1896, USA Link to patent source notes Directory of American Tool and Machinery Patents Jim Bode sold one of these in the not-too-distant...
EUR €108.02 excl tax, duties and fees
Tissington Smoothing Plane [Vintage, Rare]Tissington Smoothing Plane [Vintage, Rare]
Revised
Tissington Smoothing Plane [Vintage, Rare]
Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
EUR €317.42 excl tax, duties and fees
Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]
Special Offer
Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]
This plane is a little bit rare these days!
EUR €421.64 excl tax, duties and fees
Stonemasons Firesharp Chisels – 10 widths [Clearance]Stonemasons Firesharp Chisels – 10 widths [Clearance]
Revised
Stonemasons Firesharp Chisels – 10 widths [Clearance]
10 double-hooped strong-as-an-ox stone masonry chisels made in France by Forge de Saint Juery home of Auriou Tool Works. Widths: 10, 15, 25, 30, 35 ,40, 45, 50, 55 & 60mm. 270mm overall length. New old stock. These wooden handled chisels are ideal for softer stone including alabaster, limestone and soapstone. When they are gone, they are gone! 3 sets available – you...
EUR €227.40 excl tax, duties and fees
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
Revised
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
11 Toothed Chisels: 10mm wide 3 pointed teeth 15mm wide 4 pointed teeth 20mm wide 5 pointed teeth 25mm wide 6 pointed teeth 30mm wide 7 pointed teeth 35mm wide 8 pointed teeth 40mm wide 9 pointed teeth 45mm wide 10 pointed teeth 50mm wide - 11 pointed teeth 55mm wide - 11 pointed teeth 60mm wide - 13 pointed teeth 270mm overall length. New old stock. Be advised...
EUR €303.20 excl tax, duties and fees
7 Pneumatic Stone Carving Tools - Auriou [Clearance]7 Pneumatic Stone Carving Tools - Auriou [Clearance]
Clearance
7 Pneumatic Stone Carving Tools - Auriou [Clearance]
Yes! The blacksmiths at legendary French artisan tool makers AURIOU TOOLWORKS also used to make tools for stone sculptors who use air powered chisels for their work. A bit noisy for us (and them maybe because they have stopped making them!) We have 3 gouges: 10mm wide, 15mm wide and 20mm wide. Also 2 snakes tongue (pied a biche) tools - for heavy shaping work (10 & 15mm wide) And 2 point...
EUR €94.75 excl tax, duties and fees
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
Clearance
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
New - just having a good old clean out and this is a bit of a bargain for woodturners This Robery Sorby system (RSTM-SCT2) comes with the carbide detail point cutter plus the following High Speed Steel Cutters RSTM-TIP3 HSS Square Cutter RSTM-TIP4 HSS French Curve Cutter RSTM-TIP5 HSS Dovetail/Box Cutter RSTM-TIP6 HSS Teardrop Inside/Outside Cutter RSTM-TIP7 HSS Mushroom Cutter And...
EUR €108.96 excl tax, duties and fees
Brusso Stainless Steel Hinges – CB302S [Clearance]Brusso Stainless Steel Hinges – CB302S [Clearance]
Clearance
Brusso Stainless Steel Hinges – CB302S [Clearance]
Brusso Hardware (USA) discontinued a lot of their range over the last few years. Most of their range of stainless hinges left their portfolio but we have a few pairs left (5 pairs) in stock. These are new. The Brusso CB-302 full mortice butt hinge, measures 1¼" x 13/16". Length: 1.250" - 1¼" - 32mm Width: 0.802" - 13/16" - 21mm Leaf Thickness: 0.086" - 5/64" - 2mm NOTE - All Brusso hinges...
EUR €39.80 excl tax, duties and fees
Brusso Stainless steel shelf support K-10S [Clearance]Brusso Stainless steel shelf support K-10S [Clearance]
Clearance
Brusso Stainless steel shelf support K-10S [Clearance]
The K-10S stainless steel shelf support pin comprises a decorative turned support and a cylindrical peg. Stainless steel gives the pin a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The peg measures 1/4" in diameter x 3/8" deep, and the support projects 7/16". Supplied as a set of 4 – you are buying 2 sets (8 shelf...
EUR €47.38 excl tax, duties and fees
2 Spokeshaves [Vintage, SOLD]2 Spokeshaves [Vintage, SOLD]
Sold
2 Spokeshaves [Vintage, SOLD]
8” beech bodied spokeshave with1 ½” straight blade, in good order. Stamped Parry & Son 359 Old St. with the Sundial logo. An adjustable mouth beech bodied spokeshave with brass adjusting knobs and curved wear strip to the sole which houses the 3” blade. No cracks, Made by J. Frost Norwich, England. 11 1/2” overall. J.Frost, Norwich dates from 1864-1892. Both...
EUR €61.59 excl tax, duties and fees
3 Lovely Vintage Brass Backed Saws [Vintage]3 Lovely Vintage Brass Backed Saws [Vintage]
Sold
3 Lovely Vintage Brass Backed Saws [Vintage]
Refurbished to a high standard. E C ATKINS 13tpi X- CROSS CUT TENON SAW – DEEP BRASS BACK 14” BLADE – attractive closed handle with ATKINS medallion FROST DOVE STREET NORWICH – SPECIAL – 18tpi DOVETAIL SAW 9” BLADE, CLOSED BEECH HANDLE 12” SPEAR & JACKSON 13tpi X – CUT “Leapfrog” tenon saw All straight bladed. A lovely collection. A...
EUR €112.56 excl tax, duties and fees
3 Pfeil Sculpture tools [Pre-owned, As New, SOLD]3 Pfeil Sculpture tools [Pre-owned, As New, SOLD]
Sold
3 Pfeil Sculpture tools [Pre-owned, As New, SOLD]
A super bargain for you big whackers!
EUR €221.72 excl tax, duties and fees
Adze Head [Vintage, SOLD]Adze Head [Vintage, SOLD]
Sold
Adze Head [Vintage, SOLD]
A little used adze head (makers mark indistinct) The blade is curved, 70mm across. The adze is 240mm overall with a short pin. Rectangular tapered poll 45mm x 30mm reducing to 38mm x 26mm. The sweep is as showed on the photo. (Medium to tight)
EUR €33.16 excl tax, duties and fees
Carpenter’s Adze Head - Brades & Co No.385 [Vintage, SOLD]Carpenter’s Adze Head - Brades & Co No.385 [Vintage, SOLD]
Sold
Carpenter’s Adze Head - Brades & Co No.385 [Vintage, SOLD]
This is in G++ condition. Carpenter’s Adze Head - Brades & Co No.385
EUR €28.43 excl tax, duties and fees
Colquhoun and Cadman 2 1/4" wide chisel [Vintage, SOLD]Colquhoun and Cadman 2 1/4" wide chisel [Vintage, SOLD]
Sold
Colquhoun and Cadman 2 1/4" wide chisel [Vintage, SOLD]
Oooh! – this is magnificent. 2 ¼” edge, an impressive 20” overall with a long handle (7 ½”) & 1 5/8” brass ferrule. We think the handle and ferrule may not be original, but this doesn’t distract from the overall appeal of this monster. It has been sharpened and for a chisel that is possibly 125 years old it is in superb condition. No pitting...
EUR €142.13 excl tax, duties and fees
E.C.E Wooden Plane [Pre-owned, SOLD]E.C.E Wooden Plane [Pre-owned, SOLD]
Sold
E.C.E Wooden Plane [Pre-owned, SOLD]
E C Emmerich Smoothing Plane - 48mm wide blade – Pre-owned We think this has not been used as it presents as new. Lacquered beech body with steamed beech sole. Wooden wedge. Made in Germany. A commission sale.
EUR €90.96 excl tax, duties and fees
ECE German-made round-bottom Smoothing Plane [Pre-owned, SOLD]ECE German-made round-bottom Smoothing Plane [Pre-owned, SOLD]
Sold
ECE German-made round-bottom Smoothing Plane [Pre-owned, SOLD]
ECE brand beech plane with a convex sole (side to side, not front to back like a compass plane) for making channels. This plane has not been used and presents as new in its orginal box. A commission sale. 240mm x 70mm overall with 50mm convex blade.
EUR €85.28 excl tax, duties and fees
Gransfors Bruks – Double Bevel Broad Axe [Pre-owned, SOLD]Gransfors Bruks – Double Bevel Broad Axe [Pre-owned, SOLD]
Sold
Gransfors Bruks – Double Bevel Broad Axe [Pre-owned, SOLD]
The pattern of the Gransfors Broad Axe and the handle is based on old Swedish logging techniques for squaring logs and structural timbers of all kinds. Has sufficient space between the "blade’s beard" and the handle for the user’s fingers. There are different options of bevels (double, left or right). You also have handle options of straight (so the blade is in line with the cutting...
EUR €187.61 excl tax, duties and fees
IOROI Bevel Edge Chisel Set – 9 piece box [Pre-owned, SOLD]IOROI Bevel Edge Chisel Set – 9 piece box [Pre-owned, SOLD]
Sold
IOROI Bevel Edge Chisel Set – 9 piece box [Pre-owned, SOLD]
Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
EUR €279.51 excl tax, duties and fees
Japanese Mortise Chisel – 12mm wide [Pre-owned, SOLD]Japanese Mortise Chisel – 12mm wide [Pre-owned, SOLD]
Sold
Japanese Mortise Chisel – 12mm wide [Pre-owned, SOLD]
A stout fella but with 80mm of blade left, enough for the building of a temple or two. 245mm overall. Red Oak handle. Steel strike hoop and ferrule. Little used. Makers stamp but we can’t identify the maker.
EUR €22.74 excl tax, duties and fees
Karl Holtey 2 1/8'' Plane Blade [Clearance, SOLD]Karl Holtey 2 1/8'' Plane Blade [Clearance, SOLD]
Sold
Karl Holtey 2 1/8'' Plane Blade [Clearance, SOLD]
Unused old stock. Stamped HOLTEY. Also stamped “s”. 4” overall. 2 1/8” wide. 3/16” thick. 4 positioning holes.
EUR €37.90 excl tax, duties and fees
Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance, SOLD]Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance, SOLD]
Sold
Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance, SOLD]
These unused tools were discontinued from Flexcut USA’s portfolio of large tools several years ago. These are unused new, old stock tools in perfect condition. Flexcut designed these beefy tools to be stuck with a mallet when working on large sculptures. but of course, they can be used by hand to shape work without whacking with a mallet as required. The old Flexcut code is MC 302 which...
EUR €13.27 excl tax, duties and fees
Lie Nielsen Toolworks – 2” wide O1 blade [Pre-owned, As New, SOLD]Lie Nielsen Toolworks – 2” wide O1 blade [Pre-owned, As New, SOLD]
Sold
Lie Nielsen Toolworks – 2” wide O1 blade [Pre-owned, As New, SOLD]
Still in original unopened packaging (dated 2013) To fit No, 4 & 5 planes. O1 steel.
EUR €42.64 excl tax, duties and fees
Lie-Nielsen Metric Dowel Plane [Pre-owned, SOLD]Lie-Nielsen Metric Dowel Plane [Pre-owned, SOLD]
Sold
Lie-Nielsen Metric Dowel Plane [Pre-owned, SOLD]
This metric dowel plate from Lie-Nielsen Toolworks comes with a leather wallet and is unused - as new. If you want to make exact-sized dowels from any wood you choose, a Lie-Nielsen Dowel Plate is the best tool. It's also handy to get a precise tenon on chair spindles. The Lie Nielsen plates are 1/4" x 5-5/8" x 1½" surface ground A2 tool steel. The holes are machined...
EUR €79.59 excl tax, duties and fees
Lie-Nielsen No.7 Jointer Plane [Pre-owned, SOLD]Lie-Nielsen No.7 Jointer Plane [Pre-owned, SOLD]
Sold
Lie-Nielsen No.7 Jointer Plane [Pre-owned, SOLD]
In Good+ condition (G+) this plane is one of the most popular planes we sell at Classic Hand Tools. The plane has been used and shows cosmetic signs of use. Good blade life remaining. Cherry front knob and tote in nice order. Lie Nielsen box. A commission sale.
EUR €494.60 excl tax, duties and fees
Lie-Nielsen Toolworks - Curved Boggs Spokeshave with leather case [Pre-owned, SOLD]Lie-Nielsen Toolworks - Curved Boggs Spokeshave with leather case [Pre-owned, SOLD]
Sold
Lie-Nielsen Toolworks - Curved Boggs Spokeshave with leather case [Pre-owned, SOLD]
Pre-owned but little used in Lie-Nielsen leather case.
EUR €165.81 excl tax, duties and fees
Lie-Nielsen Toolworks No.9 Mitre Plane [Pre-owned, SOLD]Lie-Nielsen Toolworks No.9 Mitre Plane [Pre-owned, SOLD]
Sold
Lie-Nielsen Toolworks No.9 Mitre Plane [Pre-owned, SOLD]
Complete with hot dog handle (which currently retails for £92) and the cherry side handle. So this is an earlier No.9 as the cherry handle was replaced over time for the hot dog option. With this purchase you get both! This discontinued plane from heirloom hand tool maker Lie-Nielsen Toolworks has been well cared for by a long-standing customer of Classic Hand Tools. We have sold 4 of these...
EUR €756.11 excl tax, duties and fees
Marples M6 Jack Plane [Vintage, SOLD]Marples M6 Jack Plane [Vintage, SOLD]
Sold
Marples M6 Jack Plane [Vintage, SOLD]
This Marples jointer plane has a 2 3/8” wide blade (original with correct cap iron and 1 ¾” left in the blade). A few scratches to the distinctive cherry red japanning. Nice handles (rosewood – we think). 18” overall Dating this plane is fun, which we will leave to you (suffice to say we think post 1940). Do your detective work here at this superb William...
EUR €96.65 excl tax, duties and fees
Norris A17 Smoother Plane [Rare, Vintage, SOLD]Norris A17 Smoother Plane [Rare, Vintage, SOLD]
Sold
Norris A17 Smoother Plane [Rare, Vintage, SOLD]
This is a commission sale of a rare A17 Norris coffin shaped smoother. Gunmetal sides with sweated steel sole and steel pins. Attractive rosewood infill which needs a very light cleaned to get rid of a few grimy marks, paint splatter etc. The rosewood will respond delightfully and hopefully the photographs already do justice to the rich rosewood colour. No major scratches or blemishes to...
EUR €1,989.77 excl tax, duties and fees
Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned, SOLD]Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned, SOLD]
Sold
Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned, SOLD]
This was a commission plane for an English customer. The plane is a skewed rebate plane with a 1 3/16'' blade set in a 1 7/8'' wide body with a full width fence that is ¾'' deep. The plane is 9 ¼'' long. It has a nicked iron as shown in the photograph and a full length brass wear strip. Philly Planes stamped on the front of the plane. We can...
EUR €236.88 excl tax, duties and fees
Record 05 SS Jack Plane [Vintage, SOLD]Record 05 SS Jack Plane [Vintage, SOLD]
Sold
Record 05 SS Jack Plane [Vintage, SOLD]
With stained beech handles, this Stay-Set (SS) version of the No.5 jack plane is in excellent condition. Stay set refers to the 2-piece cap iron which makes the sharpening of the iron somewhat quicker as you do not have to disassemble the plane iron assembly. Dating from 1950 – 1965 2” wide blade. 1 ½” original iron remains. This may have been refurbished...
EUR €85.28 excl tax, duties and fees
Record Compass (Circular) Plane – Record 020 [Vintage, SOLD]Record Compass (Circular) Plane – Record 020 [Vintage, SOLD]
Sold
Record Compass (Circular) Plane – Record 020 [Vintage, SOLD]
This plane probably dates from about the 1980’s and is in very good condition. There is relatively little wear to the sole and all the things to check for in these planes have all passed (the sole moves freely, no cracks in the casting, all original parts, mouth rivets are not proud of the sole, the lateral blade adjuster works properly, full convex and concave range etc etc).
EUR €99.49 excl tax, duties and fees
Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance, SOLD]
Sold
Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance, SOLD]
New This system (RSTM-SCT3) comes with the carbide square cutter plus the following titanium nitride cutters RSTM-GT2 Excelsior Detail Point Cutter RSTM-GT4 Excelsior French Curve Cutter RSTM-GT6 Excelsior Teardrop Inside/Outside Cutter RSTM-GT7 Excelsior Mushroom Cutter
EUR €108.96 excl tax, duties and fees
Veritas Combination Plane with storage box & 7 cutters [Pre-owned, SOLD]Veritas Combination Plane with storage box & 7 cutters [Pre-owned, SOLD]
Sold
Veritas Combination Plane with storage box & 7 cutters [Pre-owned, SOLD]
Please note: you may only have a maximum of 20 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
EUR €469.02 excl tax, duties and fees
Veritas Concave Spokeshave [Rare, Pre-owned, SOLD]Veritas Concave Spokeshave [Rare, Pre-owned, SOLD]
Sold
Veritas Concave Spokeshave [Rare, Pre-owned, SOLD]
This is a curious rarity. Originally made by Veritas as one of 3 shaves designed by Brian Boggs the legendary chairmaker (and top geezer) before they were subsequently made by Lie-Nielsen Toolworks. So this dates back about 20-25 years. It is slightly smaller than the current LN model being 9" overall with rosewood handles. 1 1/4" blade.
EUR €213.19 excl tax, duties and fees
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | Last