Brand
Price
Additional Filters
26 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Veritas 5 ¼ Jack Plane [Pre-owned]Veritas 5 ¼ Jack Plane [Pre-owned]
Veritas 5 ¼ Jack Plane [Pre-owned]
Veritas No. 5 1/4 - junior jack plane. At 305mm long, this plane sites between the No. 4 smoother and the No.5 Jack plane. 50mm wide blade which sits 115mm back from the nose of the sole. This extra length of sole in front of the blade makes it much easier to cut accurately because the extra-long nose makes it easier to maintain the sole flush to the material at the start of a cut. The combination...
£220.00 (VAT exempt)
Norris A5 Smoothing Plane – original box [Vintage]Norris A5 Smoothing Plane – original box [Vintage]
Sold
Norris A5 Smoothing Plane – original box [Vintage]
You may only have 30 minutes to complete your purchase after you have entered this item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£425.00 (VAT exempt)
Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New]Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New]
Sold
Lie-Nielsen Toolworks – Standard Angle No.103 Block Plane [Pre-owned, As New]
You may only have 30 minutes to complete your purchase after you have entered this rare item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£325.00 inc VAT
Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New]Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New]
Sold
Lie-Nielsen Toolworks - White Bronze 102 Low Angle Block Plane [Clearance, As New]
You may only have 30 minutes to complete your purchase after you have entered this rare item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£325.00 inc VAT
Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare]Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare]
Sold
Lie Nielsen Toolworks – Set of 3 Pistol-grip Dovetail Saws [Rare]
You may only have 30 minutes to complete your purchase after you have entered this item into your basket.  This is so others may not be blocked from purchasing should you decide not to proceed.
£480.00 inc VAT
Auriou Rasp-stitchers Hammer [Rare, Vintage]Auriou Rasp-stitchers Hammer [Rare, Vintage]
Auriou Rasp-stitchers Hammer [Rare, Vintage]
This is from the Auriou Toolworks forge in France. The handle is boxwood and has the distinct wear marks where the “stitcher” held the handle with his fingers for many years. A “stitcher” is the person who applies the teeth to the face of the rasp which would be held in a lead bedded anvil (to avoid “bounce”). The teeth are applied in diagonal rows and this...
£225.00 inc VAT
6 Rasp/Chisel handles – French Walnut [Clearance]6 Rasp/Chisel handles – French Walnut [Clearance]
Sold
6 Rasp/Chisel handles – French Walnut [Clearance]
Attractive French Walnut handles for chisels, rasps etc. 5" overall (125mm) with 3/4" diameter ferrule, rounded profile with waist. The handles are pre-drilled with a 4mm diameter hole about 12mm deep. Clear lacquer finish. New old stock.
£35.00 inc VAT
Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New]Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New]
Sold
Matched Plane Iron & Cap Iron - IBC - Rob Cosman [Pre-owned, As New]
2 3/8" wide Rob Cosman IBC plane & cap iron Crafted from high-vanadium A-2 steel, this blade boasts a thickness of 0.140 inches and a hardness of 60-62 HRc, ensuring exceptional edge retention and durability. The blade undergoes cryogenic treatment to enhance wear resistance, while the sides are precision-ground square to the bevel and hand-polished for optimal performance. Unused but...
£65.00 inc VAT
A Tailor’s 36” Straight Rule [Rare, Vintage]A Tailor’s 36” Straight Rule [Rare, Vintage]
A Tailor’s 36” Straight Rule [Rare, Vintage]
Made from beech with brass edges and ends, this is lovely rule with clear markings on the upper face which has one bevelled edge. 36” long, ½” thick and 2 ¼” deep.
£65.00 inc VAT
Henry Taylor Fishtail Carving Gouges [New, Clearance]
Henry Taylor Fishtail Carving Gouges [New, Clearance]
3 professional grade carving gouges from Sheffield maker Henry Taylor Fishtail Gouge – 5/16” (8mm) swep 7 Fishtail Gouge – 1/8” (3mm) Sweep 9 Fishtail Gouge – ¼” (6mm) Sweep 11 New discontinued stock in original packaging. These fishtail gouges have quite tight curves (11 being the tightest) and should be used for fine detail work. Please...
£48.00 inc VAT
Henry Taylor Straight Carving Gouges [New, Clearance]
Henry Taylor Straight Carving Gouges [New, Clearance]
5 straight carving gouges from Henry Taylor Sheffield’s professional range. New unused, stock in original packaging. Straight gouge – sweep 3 (shallow curve) – 2mm Straight gouge – sweep 5 (medium curve) – 3mm Straight gouge – sweep 9 (tight curve) – 2mm Straight gouge – sweep 9 (tight curve) – 5mm Straight gouge – Sweep 11 (very...
£80.00 inc VAT
Clifton Anniversary Plane Set – 7 Planes [Rare]Clifton Anniversary Plane Set – 7 Planes [Rare]
Clifton Anniversary Plane Set – 7 Planes [Rare]
A wonderful set of 7 Limited Edition Clifton Anniversary Planes 2010 – for users & collectors. This is one of just twelve full sets known to have been sold from this well respected Sheffield plane maker. (Note - Classic Hand Tools sold the vast majority of the planes when they were launched as a limited edition, so we are very confident of our numbers). You are buying a small slice...
£3,450.00 (VAT exempt)
Preston Flat Soled Spokeshave – Nickel Plated [Vintage]Preston Flat Soled Spokeshave – Nickel Plated [Vintage]
Special Offer
Preston Flat Soled Spokeshave – Nickel Plated [Vintage]
This attractive shave is the Preston 1391 shave with 2'' blade Original Preston iron with plenty of life left. .10'' overall. A very attractive which presents well with all original parts. A commission sale.
£75.00 (VAT exempt)
Attractive Beech bodied Plough Plane with Boxwood arms & Fence [Vintage]Attractive Beech bodied Plough Plane with Boxwood arms & Fence [Vintage]
Special Offer
Attractive Beech bodied Plough Plane with Boxwood arms & Fence [Vintage]
Boxwood beauty!
£110.00 (VAT exempt)
Norris No.13 Smoothing Plane [Vintage]Norris No.13 Smoothing Plane [Vintage]
Revised
Norris No.13 Smoothing Plane [Vintage]
Steel soled Norris smoothing plane with pinned parallel patent metal sides and attractive rosewood infill. Alex Mathieson & Son iron ( 1 ½” remaining at least) and matching cap iron. The lever cap is stamped Norris London. This was once owned by an A Kirkland, whose name is on the rosewood, AK initials on the plane bed and quite discreetly dotted on one of the steel sides. The...
£395.00 (VAT exempt)
Mortise & Tenon Magazine – Individual Editions, 1, 2 & 3 [Clearance]
Last Ones!
Mortise & Tenon Magazine – Individual Editions, 1, 2 & 3 [Clearance]
These magazines were combined into a compound hardback book Mortise & Tenon Issued 1-3 about 3 years ago. These are individual copies in excellent (unread) condition. Issue 1 Mortise & Tenon Magazine 2016 Issue 2 Mortise & Tenon Magazine 2016 Issue 3 Mortise & Tenon Magazine 2017
£75.00 inc VAT
Bessey KR60-2K Clamps x 4 Pack [Clearance, UK mainland only]
Bessey KR60-2K Clamps x 4 Pack [Clearance, UK mainland only]
UK mainland shipping only and excluding post codes AB31-56, BT 1-94, FK17-19, HS1-9, IM 1-99, IV1-63, KA, Kw1-9, PA 20-88, PH 15 - 50, PO 31-41, TR 21-25 & ZE1-3 and Guernsey & Jersey
£200.00 inc VAT
Scooped Adze by Muller – Austria [Clearance]Scooped Adze by Muller – Austria [Clearance]
Clearance
Scooped Adze by Muller – Austria [Clearance]
New but the edge needs to be re-sharpened. Great for hollowing and shaping. 450mm overall length with straight ash handle. 70mm wide cutting edge which is almost a semi circle. Normally retails for £103
£72.00 inc VAT
Henry Taylor Sheffield Fishtail Carving Gouges – Series 11 – 5 widths [New, Clearance]
Henry Taylor Sheffield Fishtail Carving Gouges – Series 11 – 5 widths [New, Clearance]
Clearance stock, From the "Professional" range of Henry Taylor carving tools. These fishtail gouges have a 4¾" (120mm) blade with a ground inner surface and a charcoal black non-reflective finish on the outer surface. Fitted with an octagonal beech handle and brass ferrules. Professional grade Sheffield made fishtail gouges series 11 – which is a tight curve. These...
£120.00 inc VAT
Norris No.20E Shoulder Plane [Rare, Vintage]Norris No.20E Shoulder Plane [Rare, Vintage]
Special Offer
Norris No.20E Shoulder Plane [Rare, Vintage]
This plane has been professionally restored although you wouldn't know this unless we told you as the restoration is perfectly done. The steel soled mouth is tight and true. Gunmetal body with lovely ebony infil and wedge. A very nice shoulder plane which bears the dings and marks of use. There is little left of the original Norris blade (clearly stamped with Norris London) hence the...
£375.00 inc VAT
Japanese Marking & Layout Tool Bundle [Pre-owned]Japanese Marking & Layout Tool Bundle [Pre-owned]
Sold
Japanese Marking & Layout Tool Bundle [Pre-owned]
White oak marking gauge with matching double marking (mortise) gauge, a small awl, a marking knife and a wooden hammer. 5 separate tools all in G++ condition.
£60.00 inc VAT
Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]
Revised
Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]
A recent, used Stanley No.80 Scraper plane with a new Hock replacement iron. The plane is in good order with 100% black japanning and a flat sole for the 2 3/8” sole.
£55.00 inc VAT
Tissington Smoothing Plane [Vintage, Rare]Tissington Smoothing Plane [Vintage, Rare]
Special Offer
Tissington Smoothing Plane [Vintage, Rare]
Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
£195.00 inc VAT
Stonemasons Firesharp Chisels – 10 widths [Clearance]Stonemasons Firesharp Chisels – 10 widths [Clearance]
Revised
Stonemasons Firesharp Chisels – 10 widths [Clearance]
10 double-hooped strong-as-an-ox stone masonry chisels made in France by Forge de Saint Juery home of Auriou Tool Works. Widths: 10, 15, 25, 30, 35 ,40, 45, 50, 55 & 60mm. 270mm overall length. New old stock. These wooden handled chisels are ideal for softer stone including alabaster, limestone and soapstone. When they are gone, they are gone! 3 sets available – you...
£240.00 inc VAT
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
Revised
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
11 Toothed Chisels: 10mm wide 3 pointed teeth 15mm wide 4 pointed teeth 20mm wide 5 pointed teeth 25mm wide 6 pointed teeth 30mm wide 7 pointed teeth 35mm wide 8 pointed teeth 40mm wide 9 pointed teeth 45mm wide 10 pointed teeth 50mm wide - 11 pointed teeth 55mm wide - 11 pointed teeth 60mm wide - 13 pointed teeth 270mm overall length. New old stock. Be advised...
£320.00 inc VAT
Brusso Stainless Steel Hinges – CB302S [Clearance]Brusso Stainless Steel Hinges – CB302S [Clearance]
Clearance
Brusso Stainless Steel Hinges – CB302S [Clearance]
Brusso Hardware (USA) discontinued a lot of their range over the last few years. Most of their range of stainless hinges left their portfolio but we have a few pairs left (5 pairs) in stock. These are new. The Brusso CB-302 full mortice butt hinge, measures 1¼" x 13/16". Length: 1.250" - 1¼" - 32mm Width: 0.802" - 13/16" - 21mm Leaf Thickness: 0.086" - 5/64" - 2mm NOTE - All Brusso hinges...
£42.00 inc VAT