Best Selling

Woodpeckers Saddle Square - TS150 [Preowned, SOLD]

Woodpeckers Saddle Square - TS150 [Preowned, SOLD]

Edge markings to 170mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying down a line parallel to the edge of your stock is as simple as finding the hole...

£60.00 (VAT exempt)

Blue Spruce Toolworks - 16oz Round Mallet [Preowned, Unused, SOLD]

Blue Spruce Toolworks - 16oz Round Mallet [Preowned, Unused, SOLD]

Pre-owned - a commission sale on behalf of our customer. As new, unused. Beautifully figured resin impregnated maple head with beech handle. This is a extract from our Blue Spruce section where this mallet retails for £148 ''Blue Spruce Round Mallets feature a maple head infused with a tough polymer resin that increases the density of the maple by 80%. The infused head puts...

£120.00 (VAT exempt)

DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned, SOLD]

DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned, SOLD]

That’s DC for David Charlesworth of Hartland, Devon, England. This marking knife hasn’t left it’s packaging so is new, unused stock. These marking knives were made to David’s specification by (almost a rock star) Phil Edwards of Philly Planes fame

£45.00 inc VAT

Kutzall 2 1/2'' Polyplug Insert

Enhance the performance of your Kutzall Contour Wheels with these PolyPlug (3/8'' bore) Accessories! They are designed to fit inside the wheels to help optimize performance and extend their life. Reduces vibration for a smoother, quieter, and more comfortable operation. Increases mounting accuracy resulting in a more 'true' operation - also allows the wheel to wear evenly for...

£12.54 inc VAT

Lie-Nielsen - Dovetail Saw [Preowned, SOLD]

Lie-Nielsen - Dovetail Saw [Preowned, SOLD]

Pre-owned with a few dinks and minor scratches/staining marks. 15ppi Rip cut Lie-Nielsen dovetail saw – 9” blade. This has been used but has a lot of life left to cut several hundred more dovetails. A commission sale.

£115.00 (VAT exempt)

Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]

Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]

Made by Pfeil - Switzerland Unused - fine condition - a commission sale. These Pfeil Punches for wood are for creating background detail for your carvings. They are made from steel and weigh 540g each. They are housed in a wooden base. Size - 10mm x 10mm x 135mm each. These are the same set of puches as Classic Hand Tools sell in their Pfeil carving tools section for £170 (and...

£125.00 (VAT exempt)

Robert Sorby Heavy Duty - Bowl Finishing Outboard Scraper

The Robert Sorby Heavy Duty Bowl Finishing Outboard Scraper is ideal for finishing when working in the outboard mode of the lathe. 1 1/2" (38mm) wide by 21" (525mm) overall length.

Robert Sorby RSJ15 Jaws 1 3/8' (35mm)

1 3/8" Jaws. Designed for smaller projects like boxes and bowls up to 6". The photo shows the RSJ15 Jaws fitted to a Patriot Chuck (not included).

£61.00 inc VAT

Woodpeckers Saddle Square - TS200 [Preowned, SOLD]

Woodpeckers Saddle Square - TS200 [Preowned, SOLD]

Pre-owned TS-200 metric Saddle T -square made in the USA. Little used in G++ condition.. Edge markings to 220mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils)...

£72.00 (VAT exempt)

Auriou Riffler Rasp Set of 6 - 200mm

All six double ended rifflers giving you 12 precision shaping heads. Set includes: Knife / Spoon Rhombus / Brush V Shape / Rectangle Thumb / Laurel Rat Tail / Oval Half Round / Triangular Very special prices for sets of rifflers from the world's best riffler make (beware imitations!).

£395.00 inc VAT

view bundle

Bad Axe Toolworks - D8 Panel Saw [Preowned, SOLD]

Bad Axe Toolworks - D8 Panel Saw [Preowned, SOLD]

A beauty and a steal. Pre-owned, commission sale. G++ condition – superficial wear marks only. The D8 is dubbed by Bad Axe Tool Works as the 'Henry Disston' in honour of the legendary saw maker himself. The Bad Axe D8 features a meticulously tapered grind achieved through advanced grinding techniques, ensuring a strong, agile blade that performs reliably under pressure. ergonomic...

£275.00 (VAT exempt)

Crown Parting & Beading Tool - 1/4'' (6mm)

A beading and parting tool made by Crown Tools to assist in creating spindles. Described as a parting and beading tool because, with practice, this tool can be used to roll a bead. Sharpening - all parting tools can be sharpened with a fine stone. Using a light touch on a grinder will create a useful litte burr which cuts a cleaner edge. M2-HSS (High Speed Steel) Stained beech handle....

£37.00 inc VAT

Henry Boyd's Freedom Bed

A children’s book written and illustrated by Whitney L.B. Miller “Henry Boyd’s Freedom Bed” is the true story of an enslaved Kentucky man who purchases his freedom and becomes one of the most innovative and important furniture makers in 19th-century Cincinnati. In this children’s picture book, appropriate for ages 3-8, you can follow young Boyd as he learns to farm...

£16.50 (VAT exempt)

Henry Taylor Woodcarving Punch - Thistle

Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.

£9.60 inc VAT

Lie Nielsen No.66 Bronze Beading Plane:
L-N 66

£345.00 inc VAT

Lie-Nielsen - 1/8'' & 1/2'' Bevel Edge Chisels [Preowned, SOLD]

Lie-Nielsen - 1/8'' & 1/2'' Bevel Edge Chisels [Preowned, SOLD]

Unused, as new. A commission sale.

£180.00 (VAT exempt)

Mappa Toolworks Mallet [Preowned, As New, SOLD]

Mappa Toolworks Mallet [Preowned, As New, SOLD]

A commission sale. As new, unused. This has a lovely blackwood handle with an infused maple head. It weighs 650g Overall height of 215mm with a 90mm deep head, 60mm diameter. Mappa (Netherlands) didn’t really get going as a tool making concern. 2 great hand tool enthusiasts got too busy with life, work and other distractions to build their portfolio of tools (where is that travisher boys??)...

£95.00 (VAT exempt)

Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New, SOLD]

Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New, SOLD]

Made by Pfeil - Switzerland These tools are very popular based on our experience in selling Pfeil carving tools for the last 15 years (but clearly not by our customer though, as he has never used them!). Precisely ground and polished. Pear handles, 70mm blade length, 125mm overall length. The set which is housed in a wooden stand includes: 1 straight chisel 8mm (L1-8); 1 skew...

£215.00 (VAT exempt)

Robert Sorby Honing Wheel

Honing wheel to fit the ProEdge Sharpening Machine. Also part of the Honing Kit (WPEPHONEKIT)

£38.00 inc VAT

Woodpeckers 300mm Precision Square (No.1281) [Preowned, SOLD]

Woodpeckers 300mm Precision Square (No.1281) [Preowned, SOLD]

The core of the 1281 is a precisely machined square milled from cast and ground tool plate......the most stable aluminium in the world. The stability of the material and the methods Woodpeckers use to machine the core mean they all hold the tolerance to +/-.0085°. To this highly accurate core they add cheeks to make the base thicker. Metric graduations One piece central core Cheeks are narrower...

£120.00 (VAT exempt)

Auriou Riffler Rasp Set of 6 - 250mm

All six double ended rifflers giving you 12 precision shaping heads. Set includes: Knife / Spoon Rhombus / Brush V Shape / Rectangle Thumb / Laurel Rat Tail / Oval Half Round / Triangular Very special prices for sets of rifflers from the world's best riffler make (beware imitations!).

£475.00 inc VAT

view bundle

Bad Axe Toolworks – 14'' Hybrid Tenon Saw [Preowned, SOLD]

Bad Axe Toolworks – 14'' Hybrid Tenon Saw [Preowned, SOLD]

Pre-owned, commission sale. G++ condition –We have given this a very light clean and many of the usual grubby spots that always accumulate have disappeared but some remain with some scratches. Closed maple handle with brass nuts. The saw blade depth is 3 3/8” The saw back is black oxidised steel. 11 ppi

£185.00 (VAT exempt)

Barr Scarf Slick

Invaluable for cutting scarf joints on your timber projects, this slick is a favorite among log and timber smiths. It is also well-suited for cleaning up adzed timbers. Barr's scarf slick has a mild sweep with a curved edge and will give you a slight concave cut. 3½" cutting edge, 7½" blade length, 16" from edge to end of socket, length with handle 30". Please note that this slick is not flat (by...

£245.00 inc VAT

Crown Tools Box Scraper - 1/4'' (6mm)

The Crown Tools 1/4'' Box Scraper was developed by professional turner Albert Harrison for cleaning out the inside of small boxes and similar end grain work. Sharpen with a diamond hone across the top flat and end - note only grind this tool when you lose the profile. M2-HSS (High Speed Steel) Stained beech handle. Walleted.

£30.25 inc VAT

Lie-Nielsen - 1/2'' Fishtail Chisel [Preowned, SOLD]

Lie-Nielsen - 1/2'' Fishtail Chisel [Preowned, SOLD]

Unused, as new. A commission sale.

£125.00 (VAT exempt)

Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New, SOLD]

Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New, SOLD]

This is a great value buy. These Henry Taylor incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. This set comprises the following gouges (if bought new from our site they would cost you £214) F11...

£164.00 (VAT exempt)

Woodpeckers 200mm Precision Square (No.851) [Preowned, SOLD]

Woodpeckers 200mm Precision Square (No.851) [Preowned, SOLD]

What sets Woodpeckers squares above the rest is their one-piece central core design. Rather than a blade attached to a beam, as you will find in most try-squares of this size, the 851 has one piece of tool plate aluminium meticulously machined into a square. Then cheeks are added to the central core with stainless steel location pins. The cheeks are 1/4'' (6mm) narrower than the central core,...

£100.00 (VAT exempt)

5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned, SOLD]

5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned, SOLD]

These are pre-owned - little used chisels with cosmetic staining to the steel blades. We have quickly cleaned them up and we think they will be absolutely fine for many years to come presenting a very affordable opportunity to get a good spread of bench chisels. 3/8", 1/2", 5/8", 1", 1 1/4" wide Boxwood round handles with brass ferrules (the largest one is split but it isn't working free and could...

£65.00 (VAT exempt)

Kirjes Small Chuck

Kirjes Small chuck suitable for use with both the sanding system and the Orbicut 20.

£13.25 inc VAT

Lie-Nielsen - 7 Pocket Leather Tool Roll [Preowned, SOLD]

Lie-Nielsen - 7 Pocket Leather Tool Roll [Preowned, SOLD]

Quality you would expect from these guys. This pre-owned roll is in very good G++ condition, Retailing on our main LN section for £105 A commission sale.

£85.00 (VAT exempt)

Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]

Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]

They may look a bit scruffy but in fact that is just dried oil in the photos which disguises tools in G++ condition with full blades and nice rosewood knobs. This pair will clean up nicely. Patent date of Jan 95 (that will be 1895!).

£138.00 inc VAT

Woodpeckers 150mm Precision Square (No. 641) [Preowned, SOLD]

Woodpeckers 150mm Precision Square (No. 641) [Preowned, SOLD]

What sets Woodpeckers squares above the rest is their one-piece central core design. Rather than a blade attached to a beam, as you will find in most try-squares of this size, the 641 has one piece of tool plate aluminium meticulously machined into a square. Then cheeks are added to the central core with stainless steel location pins. The cheeks are 1/4'' (6mm) narrower than the central core,...

£80.00 (VAT exempt)

Woodpeckers DeadNutz Square 3.5''

Woodpeckers DeadNutz Square Machined to perfection using the latest technology, giving rise to its name. To ensure the DeadNutz Square lives up to its name, Woodpeckers uses Wire Electrical Discharge Machining (EDM) technology. Wire EDM erodes away the metal at the micron level, resulting in incredible precision and quality. DeadNutz is made from one piece of 3/8'' (9.8mm) thick stainless...

£113.40 inc VAT

2 Woodpeckers Metric Carpenter's Squares & Mini Square Bundle [Preowned, SOLD]

2 Woodpeckers Metric Carpenter's Squares & Mini Square Bundle [Preowned, SOLD]

Pre-owned, commission sale. All 3 squares are in excellent condition with minor cosmetic blemishes. 150mm & 95mm Carpenter's Squares & The Mini Square All made by Woodpeckers USA. Both of these One-Piece Carpenter Squares have an engraved scale along the vertical edge and the 150mm also has the most common angles marked (18, 22-1/2, 30, 45, 60, 67.5, 72). Metric graduations every millimetre. The...

£88.00 (VAT exempt)

4 Small Beech Rebate Planes [Preowned, SOLD]

4 Small Beech Rebate Planes [Preowned, SOLD]

All with the same owners stamp C Gibson. Convex from front to toe. 4 1/8” long C NURSE & CO. LONDON (owners stamp R. Gibson) Boat shaped sole. 4 ½” long. NURSE (C Gibson) Straight rebate. 4 ½” long. NURSE (C Gibson) Rounded sole. 4” long. (R. Gibson) All the wedges and irons are in g++ condition. It is a sweet collection. We have given...

£60.00 inc VAT

Barr 7/8'' Corner Chisel

Corner chisels are forged from tough carbon steel; these chisels are hand-tapered, bent to 90 degrees, then flat ground. Terrific for cleaning out mortises. 7/8" (22.225mm) x 7/8" (22.225mm) x 18" (450mm)

£235.00 inc VAT

Lie-Nielsen - Pair of Drawbore Pins [Preowned, SOLD]

Lie-Nielsen - Pair of Drawbore Pins [Preowned, SOLD]

From our main LN section – “Drawboring is a great way to make a strong mechanical joint. A wooden pin is hammered through slightly offset holes in the two pieces, and pulls the joint together. You use Drawbore Pins to pull the joint together first (with some force and a twisting motion). This eases the edges of the hole, making driving the wood pin easier. You can also disassemble the joint...

£95.00 (VAT exempt)

Robert Sorby Recessing & Dovetailing Cutter

The Recess and Dovetail cutter (RS-234C) is the perfect tool for creating dovetails and recesses at 45 – 60º – ideal for creating a foot on a bowl. Designed for use with: Multi-tip Hollowing Tool (RS-200KT and RS-200) and Swivel Tip Probe (RS-8803H) High Speed Steel.

£19.47 inc VAT

3 Vintage Mortise Chisels [Vintage, SOLD]

3 Vintage Mortise Chisels [Vintage, SOLD]

These beauties (2 stamped BUCK and the larger one stamped I & H SORBY) I & H SORBY – octagonal handle – ½” wide BUCK – oval handle 3/16” wide BUCK – oval handle 3/8” wide Great condition. 11 1/2” - 12 ¼” overall length.

£72.00 inc VAT

Crown Tools Dovetail Cutting Tool

In 2001 Stiles and Bates ground some of their 1/2'' scrapers to this profile for a course they were running. Crown Tools followed suit so you lovely people can also benefit from S&B's innovation. So this is not a new idea but from what Dave Bates has shared with us, this tool is more useful than other dovetail tools as it will cut both internal and external dovetails on bowls...

£39.80 inc VAT

Gyokucho 372 Dozuki 240mm Rip + Spare Blade

Gyokucho 372 Dozuki 240mm Rip with a spare blade.

£68.95 inc VAT

view bundle

Iyoroi Spearpoint 18mm Drawshave Chisel - Yari Kanna [Preowned, As New, SOLD]

Iyoroi Spearpoint 18mm Drawshave Chisel - Yari Kanna [Preowned, As New, SOLD]

Boxwood handle - unused. In fact whilst it looks like a chisel it is best described as a plane (kanna). These work by drawing the edge towards you. They are also described as a Japanese skew chisel that tapers to a point from 18mm. The length of the blade is 60mm with an overall length of 210mm Japanese Yari Kanna are unusual tools, descended from ancient Korean and Japanese bent chisels used...

£65.00 (VAT exempt)

Lie-Nielsen No.60 1/2 - Low Angle Adjustable Block Plane [Preowned, SOLD]

Lie-Nielsen No.60 1/2 - Low Angle Adjustable Block Plane [Preowned, SOLD]

This scruffy boy has the scars of use and some wear but still has plenty of life left in the iron. The mouth adjuster and screw blade adjustment are working fine. Priced to sell. A commission sale.

£95.00 (VAT exempt)

Woodpeckers 6SS Carpenters Square [Preowned, SOLD]

Woodpeckers 6SS Carpenters Square [Preowned, SOLD]

The fixed 90° and 45° angles are accurate to within .0085° or better. The square’s stout construction, including a stainless steel blade, means it will last a lifetime and never lose tolerance. The tool’s aluminum handles are registered on the base of the square with precision-milled, tight-tolerance steel pins, then fastened with stainless steel socket head screws. Woodpeckers Model 6SS Carpenters...

£88.00 (VAT exempt)

Convex Beech Plane (with Adjustable Front Boxwood Depth Stop) [Preowned, SOLD]

Convex Beech Plane (with Adjustable Front Boxwood Depth Stop) [Preowned, SOLD]

The 2 ¼” wide iron is by Buck Owners stamp C Gibson

£24.00 inc VAT

Flexcut 45-degree V-Tools (45°)

The Flexcut 45-degree V-Tools are interchangeable blades with a 45° V-shaped edge used for wood carving. These unhandled V-tools are compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving. Available Widths: 1mm (micro) SK803 5/32'' (4mm) SK317 1/4''...

from £23.45 inc VAT

view options

Lie-Nielsen No.9 - Mitre Plane [Preowned, SOLD]

Lie-Nielsen No.9 - Mitre Plane [Preowned, SOLD]

Pre-owned and used. A commission sale. Complete with Hot Dog handle (which currently retails north of £90) This discontinued beauty has marks of use. The sole is 90-95% free of any marks as is the side face where the hot dog is currently sitting. The other face has all the scrach and discolouration marks affecting maybe 10-15% of the face. So if you are lookig for pristine, look eleswehere....

£495.00 (VAT exempt)

Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, Unused, SOLD]

Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, Unused, SOLD]

Pre-owned but unused in original packaging (2021) This is from our description on our main site where the dowel pate is available for £106 "If you want to make exact-size dowels from any wood you choose, a Lie-Nielsen Dowel Plate is the best tool. It's also handy to get a precise tenon on chair spindles. The Lie Nielsen plates are 1/4" x 5-5/8" x 1½" surface...

£88.00 (VAT exempt)

Recently viewed

Classic Hand Tools

Customer Service

Best Selling

Category

Brand

Collection

Price

Additional Filters

Sort By

Per Page

View

Recently viewed