Best Selling

1 1/4'' Coopers Bung Auger [Preowned, SOLD]

1 1/4'' Coopers Bung Auger [Preowned, SOLD]

Made by Wm. Marples, Sheffield This has a 9'' beech handle with a tapered auger that is stamped 1 1/4'' Wm Marples., Sheffield. It will clean up to G++ with little effort. No rust at all, the handle just needs a light clean with some wax and wire wool.

£24.00 inc VAT

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

This 3 volume set of Knight's American Mechanical Dictionaries and the single volume of Knight's New Mechanical Dictionary (Supplement) was reprinted jointly by The Mid-West Tool Collectors Association and The Early American Industries Association October 1979. It is written elsewhere that "This work has been selected by scholars as being culturally important, and is part of the knowledge...

£250.00 (VAT exempt)

Plough Plane Project [Preowned, SOLD]

So, this grubbly plane, like Fraser, needs a good clean. Beech, with brass tips, escutcheons and depth stop screw. You do not need to put on the marigolds or find a buffing wheel to clean it up. Nothing too heavy is needed , just a bit of tender loving care with a bit of fine wire wool to clean off a few idle paint marks, years of dust layers and a minor amount of surface rust. We think this...

£75.00 inc VAT

Lie-Nielsen Toolworks Bevel Edge Chisels - Set of 7 [Preowned, SOLD]

Lie-Nielsen Toolworks Bevel Edge Chisels - Set of 7 [Preowned, SOLD]

Pre-owned but hardly used. This set of 7 includes the following sizes: 1/8'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2'' & 5/8'' (note the correction to earlier description that listed 2 x 3/8" - our apologies for that but it was Fraser's fault as usual) The 5/16'' appears to have been sharpened once but the others are unused. The...

£665.00 inc VAT

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Here is a rare treat. The left hand version has been discontinued and the right handed plane in bronze has not been seen for a few years yet. The Lie-Nielsen No 140 Skew Block Plane is based on the long unavailable Stanley 140, this multi-talented tool is designed to deal with difficult woods using a combination of a low angle approach, shear cutting action from the skewed and tilted blade. A...

£1,200.00 inc VAT

Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]

Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]

Pre-owned but hardly used at all. This Lie-Nielsen small chisel plane comes with a branded LN sack to keep it protected. The Lie-Nielsen Chisel Plane is the perfect little tool 175mm x 45mm (6½" x 1¾") for removing glue and trimming dowel plugs. It is very useful for working into corners and to the ends of rebates. The heavy 4.8mm - 3/16" A2 thick blade is set at 12 degrees. The blade is as new. You...

£175.00 inc VAT

Replacement Blade for Veritas Scraper Shave

This high-carbon steel replacement blade is 0.040'' thick and hardened to Rc48-52, with a 45° cutting edge that can be readily burnished to create a long-lasting hook. Made in Canada.

£13.75 inc VAT

Veritas Bullnose Plane [Preowned, Unused, SOLD]

Veritas Bullnose Plane [Preowned, Unused, SOLD]

Pre-owned but unused. This is what we say about it on our main site where this exact tool is available for £233 inc VAT "The Veritas® bullnose shoulder plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you'll ever own. Designed for maximum versatility, it performs as either a bullnose or a chisel plane as required. Simply loosen the brass toe-locking...

£155.00 inc VAT

Lie-Nielsen Toolworks - Low Angle Smoothing Plane No.164 [Preowned, Unused, SOLD]

Lie-Nielsen Toolworks - Low Angle Smoothing Plane No.164 [Preowned, Unused, SOLD]

Pre-owned but never used. The description in our Lie-Nielsen plane section says this... "The Low Angle Smoothing Plane is based on the rare Stanley 164, and is essentially a shorter version of the Low Angle Jack Plane - with an adjustable mouth, and a massive 2" (5.08cm) wide, 3/16" (4.7mm) thick blade, set at 12°. However, this tool is only 9½" (24.1cm) long and weighs 3¾ lbs. It is called a...

£295.00 inc VAT

Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]

Woodpeckers Saddle T-300 [Preowned, Unused, SOLD]

Pre-owned T-300 metric square made in the USA. Unused, as new. Edge markings to 320mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying down a line...

£84.00 inc VAT

Lie-Nielsen Toolworks - No 4 Smoothing Plane (Iron) [Preowned, SOLD]

Lie-Nielsen Toolworks - No 4 Smoothing Plane (Iron) [Preowned, SOLD]

Pre Loved

£325.00 inc VAT

Lie-Nielsen - Pair of Preston style Spokeshaves with Leather Cases [Preowned, SOLD]

Lie-Nielsen - Pair of Preston style Spokeshaves with Leather Cases [Preowned, SOLD]

Pre Loved

£335.00 inc VAT

Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]

Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]

Pre Loved

£25.00 inc VAT

Small Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Small Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Pre Loved

£36.00 inc VAT

Large Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Large Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Pre Loved

£45.00 inc VAT

Clifton 410 - 18mm Shoulder Rebate Plane [Preowned, SOLD]

Clifton 410 - 18mm Shoulder Rebate Plane [Preowned, SOLD]

Pre Loved

£125.00 (VAT exempt)

Lie Nielsen Toolworks - Fishtail Chisels [Preowned, SOLD]

Lie Nielsen Toolworks - Fishtail Chisels [Preowned, SOLD]

Sold

£300.00 inc VAT

Lie Nielsen Toolworks - Corner Chisels [Preowned, Unused, SOLD]

Sold

£350.00 inc VAT

Woodpeckers 300mm Centre/Standard Rule with end stop [Preowned, Unused, SOLD]

Sold

£36.00 inc VAT

Drawknife - Mike Abbott designed 8'' blade [Preowned, SOLD]

Sold

£48.00 inc VAT

JessEm Tool Company - Wood Sabre Marking Gauge (08803) [Preowned, Unused, SOLD]

Sold

£75.00 inc VAT

Richard Kell Wonder Bundle [Preowned, SOLD]

Sold

£100.00 inc VAT

Woodpeckers - 6'' Carpenters Combination Square [Preowned, Unused, SOLD]

Pre-owned, but the condition is ''as new''. The Woodpeckers 6'' Carpenters Square is a perfectly machined combination 90-degree and 45-degree with handles for a physical reference to the edge of the workpiece. The blade is machined from cast and ground aluminium tool plate. This expensive material is utilised for its mechanical stability and tendency to maintain close...

£50.00 inc VAT

Robert Sorby Small Ultima Hollowing Tool [Clearance, SOLD]

Robert Sorby Small Ultima Hollowing Tool [Clearance, SOLD]

Clearance

Was £145.00 Now £125.00 inc VAT

1'' (25mm) Blue Spruce Paring Chisel (with Resin Infused Figured Handle) [Preowned, Unused, SOLD]

1'' (25mm) Blue Spruce Paring Chisel (with Resin Infused Figured Handle) [Preowned, Unused, SOLD]

Beautiful and unused. We are unsure as to the handle species but it looks like walnut. The handle is a deeply figured brown with black streaks. 11 1/2" overall (the handle with the ferrule is 4 1/4"). Original packaging. This is a commission sale on behalf of a customer.

£105.00 (VAT exempt)

Blade for Cast Round Spokeshave

Replacement PM-V11 blade to fit the Lee Valley Cast Round Spokeshave (15P1701).

£27.00 inc VAT

Bridge City Toolworks - Tri & Mitre Squares [Preowned, Unused, SOLD]

Bridge City Toolworks - Tri & Mitre Squares [Preowned, Unused, SOLD]

These are The Bridge City Tool Works ungraduated Made in China 2019 models. 5V2 Precision Try Square - This precision square is made of extremely stable and anodized aluminium, making it very robust. The handle consists of two symmetrical parts. Four screws secure the blade, which is slightly rounded at the corners. Made to a tolerance of 0.01 mm per 100 mm. There is a triangular cut-out in the...

£80.00 (VAT exempt)

Clifton Convex Spokeshave – No.550 [Preowned, SOLD]

Clifton Convex Spokeshave – No.550 [Preowned, SOLD]

Pre-owned – some minor wear and cosmetic markings. G++ condition. A commission sale. Clifton spokeshaves (UK) are made from virtually unbreakable spheroidal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The...

£100.00 (VAT exempt)

Clifton No.3 - Smoothing Plane [Preowned, SOLD]

Clifton No.3 - Smoothing Plane [Preowned, SOLD]

Pre-owned, a commission sale. This plane has seen little use and is in G++ condition with original box and packaging. This is the smallest smoothing plane Clifton make; ideal for those with smaller hands, or those with smaller jobs that don't require so much heft. Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment...

£245.00 (VAT exempt)

Crucible Exeter Hammer

After years of research, prototyping and testing, Crucible have developed an ideal furniture-maker's hammer. With a 9.8-ounce (280g) steel head and a balanced octagonal hickory handle, the Crucible Exeter-pattern hammer is suitable for many common tasks at the bench. Lighter than the typical carpenter's hammer, the Exeter-pattern excels at driving the typical 4d and 6d brads used in traditional...

£139.00 inc VAT

Da Vinci Bicycle

The Leonardo Bicycle has an interesting and controversial history. The design itself would have been incredibly groundbreaking for the time, no inventor/engineer during that era had even considered a personal vehicle – of any kind (well, maybe a horse). A bicycle design was not seen until the 1800’s – over 300 years later! It is widely accepted that the image was not drawn by Leonardo,...

£16.50 inc VAT

Flexcut 19 Pocket Tool Roll SK200

Keep all your Flexcut tools in one convenient tool roll. Fits 18 unhandled gouges and 1 handle. Note the tools are not included.

£30.75 inc VAT

Gifkins H20 Dovetail Jig Template Upgrade Kit

The H20 template cuts the same sized dovetail joint as the H10 template. The significant difference is a greater distance between pins. The H10 cutters are used with this template. Timber thickness range: 2mm to 10mm. Pin Size 6mm. Pin Spacing 26mm. Min material thickness 2mm. Max material thickness 10mm. Max width 290mm. This kit includes the template, both cutters and spare backing...

£205.00 inc VAT

Hamlet Round Side Cutting Scraper

These Hamlet scrapers are used to finish the insides and bottoms of objects as they are able to cut where conventional tools cannot reach. This 3/4'' Round Side Cutting Scraper has a 10'' handle.

£41.45 inc VAT

Henry Taylor Chris Stott Hollowing Tool

This Henry Taylor Hollowing Tool has been designed personally by Chris Stott. These tools are ideal for turning small hollow forms up to 4'' in depth or diameter. The bent scraper works perfectly on curved areas, including tight areas around the neck of the opening. This hollowing tool is 3/8'' in size. Handle length is 10''

£43.40 inc VAT

Kirjes Detailed Sanding & Polishing Kit

The Kirjes Detailed Sanding & Polishing Kit is the ultimate solution for fine sanding and polishing tasks, designed for use with the KJ120 and KJ130 drums. This comprehensive kit includes sanding sleeves for waxing and polishing, a hand pump, a cleaning stick, and wax. It provides everything you need to achieve a smooth, polished finish on your woodworking projects, making it an essential addition...

£85.00 inc VAT

Lie-Nielsen Mortise Chisels - Set of 5 with Leather Roll [Preowned, Unused, SOLD]

Lie-Nielsen Mortise Chisels - Set of 5 with Leather Roll [Preowned, Unused, SOLD]

Over £750 pounds worth selling for a great price - we can't belive these haven't been snapped up! These mortise chisels are pre-owned but unused. A Lie-Nielsen branded 7 pocket tool roll houses these 5 unused Lie-Nielsen mortise chisels. The tool roll has a few minor cosmetic small stains which will clean off (no tears, rips or damage). Chisels sizes - 3/16'', 1/4'',...

£595.00 (VAT exempt)

Lie-Nielsen No.073 - Large Shoulder Plane [Preowned, SOLD]

Lie-Nielsen No.073 - Large Shoulder Plane [Preowned, SOLD]

Commission sale Pre-owned in excellent condition This description is from our main site where this plane (without plane sack is normally available for £376 - but we are currently out of stock!) ''A versatile, general purpose shoulder plane with nice heft and the best size to start with. This all-metal shoulder plane is based on the Record 073, which in turn was based on a Preston...

£300.00 inc VAT

Lie-Nielsen No.49 - Small Tongue & Groove Plane [Preowned, SOLD]

Lie-Nielsen No.49 - Small Tongue & Groove Plane [Preowned, SOLD]

Pre-owned - a commission sale on behalf of our customer. This is the description of the plane from our web site (currently out of stock, priced at £329) "The Lie-Nielsen Tongue & Groove Plane (1/2'') cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one-piece blade registers on the milled body casting,...

£255.00 (VAT exempt)

Lie-Nielsen – Pair of 1/2'' Skew Chisels [Preowned, SOLD]

Lie-Nielsen – Pair of 1/2'' Skew Chisels [Preowned, SOLD]

Pre-owned but still with the wax on the ends. A commission sale. These skew chisels are not currently offered by Lie-Nielsen so this is a rare opportunity to purchase. No box.

£250.00 (VAT exempt)

Martinez Signature Series 7075 - Metric Rapid Square (with base) [Preowned, SOLD]

Martinez Signature Series 7075 - Metric Rapid Square (with base) [Preowned, SOLD]

This is a commission sale. Used but in G++ condition. This US made roofing square with a 180mm metric blade designed for accuracy and durability. Made with aerospace grade aluminium, hard anodised, this square is light and strong with very, easy to read measurements. The base (or heel) is anodised aluminium in red (no level) providing a reliable base that improves control and precision in marking...

£88.00 (VAT exempt)

Nigel Melfi High Angle Block Plane - Rosewood (SOLD)

NOW SOLD Exceptional workmanship is evident in this CBII high angle block plane with lovely 'Cupids Bow' dovetails on the sole. The weight and feel of each Melfi plane feels "right" and the user will enjoy the experience of using such a lovely plane. Melfi's inspirations in the plane making world include Karl Holtey, Konrad Sauer, Olly Sparkes & Bill Carter and his meticulous...

Onager

The Onager was used by the Roman Army to lay siege to city walls and fortification in their territories around the Mediterranean sea and beyond. This torsion powered version can fire small clay balls (included) and other projectiles over 15 feet.

£24.50 inc VAT

Quansheng - No.5 Bedrock Pattern Bench Plane [Preowned, Unused, SOLD]

Quansheng - No.5 Bedrock Pattern Bench Plane [Preowned, Unused, SOLD]

Unused, in original box and packaging, as new. Cherry handles, 2'' wide blade. 14'' overall length (355mm) This is a commission sale on behalf of a customer.

£115.00 (VAT exempt)

Record Calvert Stephens - CS88 Bench Plane [Preowned, SOLD]

Record Calvert Stephens - CS88 Bench Plane [Preowned, SOLD]

This is a commission sale on behalf of a customer. This limited edition plane was made by Record Tools. The excellent reference site dedicated to Record Tools is the best place to discover more information on all matters Record including detailed information about this plane (although the prices they quote are 17 years out of date!). Information on the Record No. CS88 Calvert Stevens Smooth...

£325.00 (VAT exempt)

Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]

Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]

In mint condition. This is a commission sale for a perfectly looked after unused plane. Quite a few of these planes, whether Stanley or Record are in circulation on Ebay and the like, but the buyer must be very wary as often these planes have had a hard life, particularly the vintage planes (the rivets on the sole near the mouth loosen and cracks can develop in the castings). No such fears here...

£185.00 (VAT exempt)

Rotur Pen Blank Trimming Tool

The Rotur Pen Blank Trimming Tool is an essential tool for pen turners, designed to precisely square the ends of pen blanks before turning and assembly. This tool ensures that your pen blanks are perfectly aligned, which is critical for achieving a professional finish. The trimming tool can be mounted in a drill chuck or used with a universal pen mandrel. Key Features: Precise Squaring: Helps...

from £17.40 inc VAT

view options

Rotur Pen Press

The ideal tool for pressing pen crafting components together. These easy to use adjustable pen presses allow you to work quickly and efficiently.

£68.29 inc VAT

Category

Brand

Price

Additional Filters

Sort By

Per Page

View