Sort By
Per Page
View
Grid
List
Tormek TNT-00 Storage Tray
The Tormek TNT-00 Storage Tray stores all the jigs included with their Woodturner's Kit. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.
The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.
Designed to hold:
TNT-300 Woodturner's...
![Lie-Nielsen - Pair of 1/2'' Skew Chisels [Preowned, Unused, SOLD]](/images/products/small/3958_10156.jpg "Lie-Nielsen - Pair of 1/2'' Skew Chisels [Preowned, Unused, SOLD]")
![Lie-Nielsen - Pair of 1/2'' Skew Chisels [Preowned, Unused, SOLD]](/images/products/small/3958_10155.jpg "Lie-Nielsen - Pair of 1/2'' Skew Chisels [Preowned, Unused, SOLD]")
Lie-Nielsen - Pair of 1/2'' Skew Chisels [Preowned, Unused, SOLD]
A pair of 1/2'' skew chisels from Lie Nielsen Toolworks.
Pre-owned but unused.
No box.
![Woodpeckers 300mm Rule with end stop [Preowned, Unused, SOLD]](/images/products/small/3914_9998.jpg "Woodpeckers 300mm Rule with end stop [Preowned, Unused, SOLD]")
![Woodpeckers 300mm Rule with end stop [Preowned, Unused, SOLD]](/images/products/small/3914_9997.jpg "Woodpeckers 300mm Rule with end stop [Preowned, Unused, SOLD]")
Woodpeckers 300mm Rule with end stop [Preowned, Unused, SOLD]
Woodpeckers 300mm Rule with end stop.
Unused, as new.
Reads left to right to 300mm on one bevelled edge.
0-150mm from the centre on the other edge.
![Large Flexcut Carving Starter Set [Preowned, Unused, SOLD]](/images/products/small/3757_9387.jpg "Large Flexcut Carving Starter Set [Preowned, Unused, SOLD]")
![Large Flexcut Carving Starter Set [Preowned, Unused, SOLD]](/images/products/small/3757_9385.jpg "Large Flexcut Carving Starter Set [Preowned, Unused, SOLD]")
Large Flexcut Carving Starter Set [Preowned, Unused, SOLD]
This boxed set of 6 tools includes a 9mm 60 degree V tool, a series-11 (veining) 6mm gouge, a series-10 14mm gouge, a series-7 11mm gouge, a series-5 17mm gouge, and a series-3 25mm gouge.
These are Flexcut's large sculpture tools, which are 250mm overall length.
In their original box, totally unused so "as new", although technically pre-owed as we bought them as part of a clearance lot. Available...
![Lie Nielsen Toolworks - Cross-Cut Tenon Saw (Brass Backed) - 13ppi [Preowned, SOLD]](/images/products/small/3738_9309.jpg "Lie Nielsen Toolworks - Cross-Cut Tenon Saw (Brass Backed) - 13ppi [Preowned, SOLD]")
![Lie Nielsen Toolworks - Cross-Cut Tenon Saw (Brass Backed) - 13ppi [Preowned, SOLD]](/images/products/small/3738_9307.jpg "Lie Nielsen Toolworks - Cross-Cut Tenon Saw (Brass Backed) - 13ppi [Preowned, SOLD]")
1 3/4'' Blade for Clifton No.3 Bench Plane
1 3/4'' blade to fit the Clifton No.3 smoothing plane.
The Clifton bench plane blades are made from O1 steel that has been cryogenically treated to give a hardness of 60 to 62 Rockwell C. 3.6mm thick.
1 3/4'' (45mm) wide.
Made in Sheffield, UK
![Blue Spruce Toolworks Ultimate Coping Saw [Preowned, Unused, SOLD]](/images/products/small/3877_9840.jpg "Blue Spruce Toolworks Ultimate Coping Saw [Preowned, Unused, SOLD]")
![Blue Spruce Toolworks Ultimate Coping Saw [Preowned, Unused, SOLD]](/images/products/small/3877_9839.jpg "Blue Spruce Toolworks Ultimate Coping Saw [Preowned, Unused, SOLD]")
Blue Spruce Toolworks Ultimate Coping Saw [Preowned, Unused, SOLD]
A lightweight maple handled 3" throat coping saw with 8 possible lockable settings for your blade or you can unlock the thumbwheels so the blade, blade clamps and sleeves rotate freely while cutting.
This saw also has the adaptors to house pin-less saw blades.
3 blades included.
Here is what Blue Spruce Toolworks say about the saw...
"Coping saws have always had a dilemma. Curved...
Brusso Jig TJ-804
Compatible with Brusso JB-804 and JB-804S
Cedar Of Lebanon
Cedar Of Lebanon Bowl Blanks.
Nice fragrance when turning, lightweight with subtle grain patterns.
Gyokucho Dozuki Cross & Rip Bundle - TPE
The Dozuki 240mm Crosscut #371 and Rip Cut #372 saws with the TPE (rubber) handle.
Replacement Blade for Clifton Low Angle Block Plane
1 5/8'' blade to fit the Clifton low angle block plane.
The Clifton blades are made from O1 steel that has been cryogenically treated to give a hardness of 60 to 62 Rockwell C.
Made in Sheffield, UK
Replacement Blade for Veritas Cabinetmakers Trimming Plane
Replacement lapped O1 steel blade for the Veritas Cabinetmaker's Trimming Plane. Hardened to Rc58-60.
Made in Canada.
Robert Sorby Chattertool - 215
Chattertool patterns add a neat, random decoration on end grain like box lids. These are created by using the Robert Sorby chattertool which comes with two different double-ended chattering tips and a handy scraper cutter. One chattertool tip (RS220) has a straight and a pointed end, the second (RS221) has a convex and a concave half-round end.
Chatter patterns are created by causing the spring...
Robert Sorby Texturing Tool
This Robert Sorby Texturing Tool is a remarkable adaptation of an engineer's knurling tool. It consists of a handle, blade and a double bevelled texturing cutter with integral bearing.
It can be used to create unique effects that alter the tactile and visual qualities of your bowls, hollow forms, goblets or boxes perfect for adding that individual mark to your work. Orange peel, striated and...
Rotur Deluxe Colleted Pen Mandrel
The new Colleted Pen Mandrel has been designed and made in the UK for pen turning professionals. Very similar to the Original Pen Mandrel, its unique quarter-turn action clamps the shaft in place accurately and its completely dust-free collet remains hidden.
Rotur Original Pen Turning Kit
The Rotur Original Pen Turning Kit is a comprehensive and portable set ideal for both beginners and seasoned pen turners. It includes everything you need to start turning pens, all packed neatly in a sturdy carrying case. The key components of the kit are:
Universal Original Pen Mandrel: Accommodates one or two pen parts simultaneously, suitable for a wide range of pen kits.
7mm Trimming Tool:...
Saburrtooth 1/4'' Cylinder - 1'' x 1'' - (Smooth End)
Head Diameter: 1"
Head Length: 1"
Saburrtooth 1/4'' Cylinder - 1/2'' x 3/4'' - (Smooth End)
Head Diameter: 1/2"
Head Length: 3/4"
Spare Blade for Lie-Nielsen 95 Edge Plane
Replacement blade for the Lie-Nielsen No. 95 Edge Planes. Comes with a 25° flat ground bevel.
1.105" wide x .125" thick
A2 cryogenically treated Tool Steel
![This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]](/images/products/small/4127_10993.jpg "This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]")
![This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]](/images/products/small/4127_10992.jpg "This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]")
This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]
This beauty dates from the 2nd World War and was of government issue.
The arrow stamped in the blade is the giveaway sign for this.
It is 14 1/2" long overall (about 365mm) and 2 1/2" wide (58mm)
It has the original very attractive handle which is in great condition.
There are many years of use left in this super chisel which tapers along its length from 1/4" to 1/8"...
![Tite-Mark Standard [Preowned, SOLD]](/images/products/small/4207_11235.jpg "Tite-Mark Standard [Preowned, SOLD]")
![Tite-Mark Standard [Preowned, SOLD]](/images/products/small/4207_11236.jpg "Tite-Mark Standard [Preowned, SOLD]")
Tite-Mark Standard [Preowned, SOLD]
Pre-owned in little used condition.
The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks.
The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head.
The Tite-Mark...
Toothed Blade for Lie-Nielsen No. 610 Low Angle Jack Rabbet Plane
Image shows non-toothed blade
Toothed Replacement blade for the Lie-Nielsen No. 610 Low Angle Jack Rabbet Plane.
Toothed blades have small chisel-like teeth. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
The blade comes with a 25° flat ground bevel.
The blade comes ready to use, but honing a secondary bevel of 5° or 10° will...
Unlocking the Secrets of Traditional Design:
Moldings
Moldings
Well proportioned moldings add visual interest, symmetry and structure to architecture, interiors and furniture. George Walker shows how he creates moldings for period or modern furniture using basic tools and techniques to create harmonious designs.
50 Minutes. Lie-Nielsen Toolworks Productions, 2009.
Veritas Small Plough Plane Conversion Kit - Left Hand
For the Veritas Left Handed Plough Plane
![Veritas Tapered Power Tenon Cutter – 5/8'' [Preowned, SOLD]](/images/products/small/4183_11189.jpg "Veritas Tapered Power Tenon Cutter – 5/8'' [Preowned, SOLD]")
![Veritas Tapered Power Tenon Cutter – 5/8'' [Preowned, SOLD]](/images/products/small/4183_11188.jpg "Veritas Tapered Power Tenon Cutter – 5/8'' [Preowned, SOLD]")
Veritas Tapered Power Tenon Cutter – 5/8'' [Preowned, SOLD]
Used as a demo model a few times. Used but in very good condition with little blade wear.
This Veritas Power tapered tenon cutter makes cutting 60-degree shouldered tenons for rustic furniture quick, easy and accurate.
For use in an electric drill (not a drill press).
This is the 5/8” size and you should use the drill at between 500-700 rpm.
Veritas code 05J4602
Instruction leaflet...
![Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]](/images/products/small/3853_9756.jpg "Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]")
![Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]](/images/products/small/3853_9754.jpg "Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]")
Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]
The Woodpeckers Box Clamp is designed for clamping cases, drawers, cabinets and most other boxes made from material 1/4" - 1" thick. Its main advantage is its ability to apply simultaneous in and downward pressure against 2 perpendicular pieces.
The box clamp can be assembled in "fixture mode" or "hand clamp mode"- either way it works the same with the difference being from which side of the clamp...
Glenn Lucas Round Nose Negative Rake Scraper
The Glenn Lucas Round Nose Negative Rake Scraper 1 3/8'' x 3/8'' with a 16'' handle
Great for refining the curves on bowls and platters, very similar to the GL1 but shaped with a round nose.
![Lie-Nielsen - Low Angle Rebating Block Plane (Knickered) [Preowned, SOLD]](/images/products/small/3921_10076.jpg "Lie-Nielsen - Low Angle Rebating Block Plane (Knickered) [Preowned, SOLD]")
![Lie-Nielsen - Low Angle Rebating Block Plane (Knickered) [Preowned, SOLD]](/images/products/small/3921_10074.jpg "Lie-Nielsen - Low Angle Rebating Block Plane (Knickered) [Preowned, SOLD]")
Lie-Nielsen - Low Angle Rebating Block Plane (Knickered) [Preowned, SOLD]
Pre-owned - a commission sale on behalf of our customer.
Original Lie-Nielsen box dates the production to March 2018.
This is what we say on our site about this plane which retails new for £218.....
The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R).
''This 12° angle rebate block plane is based on an old...
Robert Sorby Patriot Chuck
No insert or exert included.
Please select your insert from the list below, or visit here
Robert Sorby RSJDG Deep Grip Jaws
Robert Sorby Deep Grip Jaws have deep sides of these jaws make them ideal for large logs or awkward pieces of wood. They come with both internal and external dovetails to hold cumbersome pieces securely.
The photo shows the RSJDG Jaws fitted to a Patriot Chuck (not included).
Selection of 5 Greetings Cards - Set 2
This set of 5 greetings cards includes the following:
Turning Urban
Five Crows
Above the Smokehouse
Earth, Sea & Sky
Shalder's Flight
All images from Fiona Kingdon's fabulous creations.
Blank inside for your own greeting.
All 5 are DL (21cm 19cm) and are printed on 300gsm card
Blue Spruce 4'' Straight Card Scraper
If you’ve struggled to sharpen and use traditional, thin card scrapers, you’re going to love the Blue Spruce Toolworks' new card scrapers. Even if you’re a master with traditional card scrapers, you’ll still appreciate the unique features they bring to the table.
Blue Spruce card scrapers are nearly twice as thick as most others on the market. The thicker blade won’t...
Flexcut Pro Series 2'' Roughing Knife FP03
The 2'' Flexcut Pro Roughing Knife features a robust full flat grind sheepsfoot blade in precision heat treated 1095 steel, polished to a brilliant mirror finish.
This knife excels at handling heavy preliminary stock removal work. The longer blade length, slim profile, and detail tip provides plenty of blade to cover a wide variety of heavy cuts in various stock sizes while maintaining full...
Flexcut Roughing Power Gouge Set RG404
These Roughing Power Gouges are for removing larger amounts of waste wood. Can be used by hand with our RG102 Handle Adaptor.
Power Gouges included: RG400 #3 x 5/8', RG401 #5 x 9/16', RG402 #8 x 3/8', RG403 70 deg. x 3/8'.
Green Wood Carving
by Harald Lamon
More than just a ‘how-to’ book, the author’s passion for wood carving as a sustainable craft and his connection to wood and nature shines through on every page. Green Wood Carving includes fascinating information about wood, how it grows, how to use it and what makes it unique. The main carving tools, their uses, and how to look after them are also explained. From...
Orbicut Grinding Card
A double sided diamond credit card style stone, designed to be used with the Orbicut blades / cutters.
Proxxon Cordless Long Neck Angle Grinder (Body Only)
Body only. No battery included.
David Barron Dovetail Kit Bundle
The ever popular Gyokucho Razorsaw Dozuki 240mm Rip saw bundled together with the David Barron 1:6 and 1:8 dovetail guides plus the 90 degree guide.
This kit also includes the Knew Concepts 5'' fret saw with lever tension and swivel blade clamps. Knew Concepts saw comes complete with a dozen Pegas #7 tooth blades (15tpi) as recommended by David.
Gifkins F15 Finger Jig Template Upgrade Kit
F15 templates are suitable for stock from 13 mm to 22 mm thick and use a 1/4" shank cutter
F15 Finger Joint Template and Cutters Kit - Includes F15 Template with Straight Cutter, 5 Adjusting Sleeves, Red Spacer, 2 backing boards and Instructions.
You can purchase cutters individually.
Specifications
Cutter: TGF15
Finger size: 15 mm
Finger Spacing: 30 mm
Max Thickness: 22 mm
Max Width:...
Gyokucho Blade for Small Gardening Saw (6611)
Replacement for the Gyokucho #6611 saw
Robert Sorby Long Nose Jaws
Robert Sorby Long Nose Jaws have a reach of 4" allowing bowls to be remounted internally. The shape of the jaws allows easy access to the back of the project. Dovetailed internally and externally for extra versatility.
The photo shows the Long Nose Jaws fitted to a Patriot Chuck (not included).
Robert Sorby Midi Round Tip
The Robert Sorby Midi Round End Swivel Tip is an excellent choice for removing waste material very quickly especially undercutting. A true work horse designed for the midi multi-tip hollowing tool but suitable for a range of Robert Sorby tools (see below)
Sharpening: Use a diamond file or honing stone flat across the face. To gain best results and increase the longevity of the cutter this simple...
Ulmia Alu-Line Sliding Bevel
A new range of layout tools from Ulmia. Ulmia are probably best known for their workbenches and wooden hand planes, but as soon as we picked these up we knew we needed to add them to our ever increasing inventory! This new series is called Alu-Line, and combines aluminium and walnut to give these squares and bevels a feel of quality which is hard to find at this price point.
Precision milled...
![Woodpeckers Equal Space Divider [Preowned, SOLD]](/images/products/small/3856_9767.jpg "Woodpeckers Equal Space Divider [Preowned, SOLD]")
![Woodpeckers Equal Space Divider [Preowned, SOLD]](/images/products/small/3856_9768.jpg "Woodpeckers Equal Space Divider [Preowned, SOLD]")
Woodpeckers Equal Space Divider [Preowned, SOLD]
This very handy tool divides your space into 6 equal parts from 3/4" (20mm) to 4" (100mm)
Based on the mathematical theory of the parallelogram this tool has arms that always move parallel to each other and stay perpendicular to the target line which allows you to be able to draw a line instead of just a point. Laser cut from stainless spring steel with Swiss machined precision pins made to very exacting...
Blue Spruce 8'' XL Straight Card Scraper
There are endless challenges when it comes to finishing wood. First and foremost is getting the surface smooth. On top of that, grain direction, plane adjustments, and tear-out all present their own obstacles. It’s a daunting enough task on straight-grained, clear lumber—and even trickier on figured wood.
Blue Spruce continues its line of card scrapers with extra-large scrapers. All...
Flexcut Universal Adaptor SK109
The Flexcut Universal Adaptor SK109 allows you to use Flexcut SK tools with many reciprocating power tools, including the Proxxon Detail Carver and Automach. This adaptor enhances the versatility of your power carving tools, making it a valuable addition for any woodworker.
Hamlet Side Handle
Will fit both Little Brother & Big Brother.
Robert Sorby RSJ1 Jaws - 1' (25mm)
1" Jaws. With a fine internal and external dovetail, these 1" jaws are perfect for gripping miniature projects. The jaws expand from 25mm to 50mm and compress from 39mm down to 14mm.
Also compatible with Nova and Supernova chucks.
The photo shows the RSJ1 Jaws fitted to a Patriot Chuck (not included).
