Sort By
Per Page
View
Grid
List
Woodpeckers Edge Rule 150mm
Woodpeckers Woodworking Edge Rule - Metric 150mm (Includes Edge Rule Stop)
Measuring the narrow edge of stock with typical rules is a little awkward. Getting the rule parallel to the stock and leaving yourself room to make a tick mark can become quite a juggling act. Working on the face of a piece is usually a little easier, but you can still struggle to jeep the rule parallel to your work. The...
Barr 3 1/2'' Leather Guard
Designed to fit the Barr Scarf and Fat Boy Slicks, these hand-crafted leather guards will help protect your investment. The guard has an ABS plastic backing insert which is sandwiched between saddle grade leather, stitched and riveted. Will also fit other chisels upto 3 1/2" wide, but designed with the Barr Scarf and Fat Boy slicks in mind.
Kutzall Contour Wheel Adapters
Kutzall offer 3 different adapters to use with their Contour Wheels:
1/4'' Shaft Adapter
Elevate your rotary tool setup with our 1/4" Shaft Adapter — designed specifically for securely mounting Kutzall Contour Wheels to your rotary tool with a 1/4" collet or adjustable chuck. Precision machined from high-grade stainless steel and hardened for superior strength, this adapter...
Robert Sorby 3/8' & 5/8' Bead Cutting Tip
The Robert Sorby Bead Cutter is one of a few additional cutters available for the popular Robert Sorby Multi-tip Hollowing Tool. This double sided cutter will cut beautiful beads on spindle work at 3/8" and 5/8" and is one of two beading cutters available for this tool.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity...
Kutzall 3 Piece Very Coarse 1/4'' Burr Kit
Kutzall burrs are the perfect companions for your rotary carving tools.
With three of the most versatile shapes in the open-spaced, ‘Very Coarse’ coating, these Burrs are ready to get to work whenever action calls.
Set Includes:
Sphere Burr (SX-1C)
Very Coarse (Extreme)
Head Dimensions: 1'' x 1''
Flame Burr (FLX-12C)
Very Coarse (Extreme)
Head Dimensions:...
Robert Sorby Honing Wheel Kit
This kit uses the abrasive honing wheel which can be shaped to allow for honing of gouge flutes - especially useful for woodcarving tools.
Items also available individually.
Arbortech Replacement Belt for Mini Carver
Replacement drive belt for use with the Arbortech Mini Grinder (ref: MIN350), M4 version Mini Turbo Kit and Mini Carver.
Crown Tools Square End Scraper
Crown Tools Square End Scrapers are available in two sizes, 1/2'' (13mm) and 3/4'' (19mm).
These traditional scrapers are ground from rectangular bar.
M2-HSS (High Speed Steel)
Stained beech handle.
Walleted.
Pfeil Chip Carving Knife - Kerb 15
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 15 also known as Gebogen, 2 Schneiden.
This is a small knife to carve fine details on objects and figures. The curved blade cuts on both sides and has a pointy tip so it can be used in many ways. It is not suitable for chip carving.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length...
Toothed Blade for the Lie-Nielsen 102 Block Plane
Replacement blade for the No. 102 or No. 103 Block Planes. Comes with a 25° flat ground bevel.
1.250'' wide x .125'' thick
A2 cryogenically treated Tool Steel
Toothed blades have small chisel-like teeth .030'' (.762mm) wide, and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
Please...
Veritas Left Handed Blades for Small Plough & Box-Maker's Plough
For the Veritas Left Handed Plough and Left Handed Box-Maker's Plane.
Henry Taylor Woodcarving Punch - Acorn
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Flexcut Macaroni Tool - 7/16'' (11mm) SK735
The Flexcut SK735 Macaroni Tool is an interchangeable blade used for wood carving. It has "Macaroni" edge, which combines two shapes into one - the flat chisel and the V-tool. It is 7/16'' (11mm) wide.
This unhandled V-tool is compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal...
Kingfisher - Greetings Card
Kingfisher is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
21cm x 10cm (DL)
Woodpeckers Stainless Steel Squares
Woodpeckers Stainless Steel Precision Woodworking Squares with Rack-It
These squares feature the same one piece precision machines central core found in all Woodpeckers fixed blade squares. Some of the highlights.......
Metric graduations
One piece central core
Cheeks are narrower than core to give a shoulder to give stability when laying out
Mark parallel to an edge by dropping a pencil...
Lie Nielsen No.66 Replacement Blades for L-N66
Seven hardened, double-ended blades will make 14 standard shapes. The blades will fit antique Stanleys as well, for those who have or acquire one without blades. Made from A2 Tool Steel, 5/8" (1.58cm) wide.
The blade profiles include:
1/16", 5/64", 1/8", 5/32", 3/16", and 1/4" Single Beads
3/32" and 1/8" Fluting
1/8" Double Reed
1/16" and 5/64" Triple Reeds
1/16" Quadruple Reed
3/32" Double Concave
3/32"...
Henry Taylor Woodcarving Punch - Cross 4
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Star
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Flower 4
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Tormek Drill Bit Sharpener
With the Tormek Drill Bits Sharpening Attachment you can now sharpen your drill bits (3-22mm) with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape.
'With All the Precision Possible:
Roubo on Furniture' New Deluxe Edition
Roubo on Furniture' New Deluxe Edition
By Donald C. Williams, Michele Pietryka-Pagán & Philippe Lafargue
This new deluxe edition of ''With All the Precision Possible: Roubo on Furniture'' is a worthy reflection of more than a decade of work by an international team that produced the first English translation of the 18th-century woodworking masterpiece: ''’art du Menuisier'' by André-Jacob...
Arbortech SpheroPlane
You can create a spherical wooden bowl or ball without a lathe using the Arbortech SpheroPlane®. This tool attaches to your angle grinder and features an adjustable carving radius, allowing you to create projects both large and small. You can transform a rough piece of wood into a finished masterpiece easily with the included Sanding System. A must have in your workshop, the SpheroPlane® turns...
Blade for Veritas Low-Angle Spokeshave
Replacement PM-V11 blade to the Veritas Low-Angle Spokeshave (05P3273).
Brusso Brass Butt Hinge with Ball Finials CB-303B
The Brusso CB-303B full mortice butt hinge with ball finials, milled from heavy brass stock, is one of four different sizes manufactured for boxes and small cabinets. It measures 1-1/4" x 1-1/16". Available without ball finials as CB-303.
Length: 1.250" - 1-1/4" - 32mm
Width: 1.063" - 1-1/16" - 27mm
Leaf Thickness: 0.085" - 5/64" - 2mm
NOTE - All Brusso...
Brusso Jig TJ-101
For Brusso Stop Hinges JB101 and Butt Hinges CB301 (with or without ball finials).
Coarse, Medium and Fine Chris Schwarz
Most woodworking projects involve roughing, refining and finishing operations. In this DVD, Chris explores the right tool to use for each stage. He groups tools by which operations they perform. By choosing the right tool for each step, woodworking can be very precise and fast. and the hand tool will often be the most effective choice. 65 minutes, Lie-Nielsen Toolworks Productions.
Fisch Elite Black Auger Bit Set of 5
The Fisch sets of 5 auger bits are available in 2 lengths, 235mm and 320mm.
The sets are supplied with 12mm, 14mm, 16mm, 18mm & 20mm diameter bits.
These German manufactured auger bits have an enviable reputation for superior quality.
Auger bits to satisfy demand from our discerning and growing customer base.
Fisch Elite Black auger bits have a corrosion resistant coating that results in lower...
Henry Taylor Hand Adze Deep Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes; this one is a tight incannel gouge (sweep 9), and is offered with an incannel or outcannel grind.
The outcannel grind is favoured by those working concave surfaces as it allows the leading edge to enter the working area easier.
At the other end to the cutting edge is a square faced hammer...
Hide Mallet Size 10
The head is 89mm (3.5'') in diameter, the length is 140mm (5.5'') and it is made of hide (see below). The total length is approximately 255mm (14'') long and the handle is wooden.
Ideal for the jewellery trade, sheet metal work, die cutting industry and use on copper, brass and soft metals.
This hide mallet has been manufactured from genuine Water Buffalo hide tightly...
Hock Carving Knives - Set of 5
The blades of these comfortable carving knives are made from Hock's high carbon steel, hardened to Rc62 (if that sounds familiar it's because that's the same steel and hardness as Hock's high-carbon knives and plane blades) easy to hone to the sharpest possible edge.
The lengths listed are an approximate blade length.
The set includes: 1" Carving Knife, 1¼" Carving Knife, 1" Chip Carver Knife,...
Matumi
Similar to Goncalo Alves, turns tight and can take fine detail bit the wood is waxy to the touch which helps with turning but can clog abrasives
.png "Last Ones!")
PEC Tools 12' Solid Square
The PEC Tools 2" Solid Square has a 2" long blade. The length of blade is measured from inner edge of the beam to the end of the blade.
The solid squares have true right angles; both inside and out. (Squareness within 0.0010").
They are made from high quality harden tool steel and the beams and blades are precision ground and hardened.
Made in the USA
Rob Cosman Kerf Saw X-10 3/4
If you cut half-blind dovetails you will love Rob's Kerf saw! This is the narrower Ker X-10 3/4 to work in saw kerfs in the .019" to .021" width range (designed for Rob's 3/4 dovetail saw).
The Kerf X-10 3/4 completes the saw cut.
Waste removal is faster than paring and more accurate. This saw works with soft and hardwoods.
The handle is made of Mahogany and the blade is...
Rob Cosman Large Tenon Saw - Rip Cut - Ebony Resin Handle
Unique features include;
Start the kerf easily with the Super Fine 20 tpi starting tip, then gain the speed you need for heavy cuts with the 12 tpi blade - we eased the angle of the cutting face a few degrees to reduce the grabbing that accompanies larger saw teeth.
Very slight .002” (per side) set makes for dead straight saw cuts and smooth ready to glue surfaces - the blade is 12 inches...
Robert Sorby Hollowmaster
The Robert Sorby Hollowmaster is the perfect complement to the Multi Tip Hollowing Tool. It uses the same unique design of a meaty 3/4" flat shank which when laid on the tool rest gives ample support to prevent the tool from being turned over by the rotation of the wood. You are not fighting the laws of nature, but removing wood with ease.
It's swan neck design means that the Hollowmaster...
Robert Sorby Patriot Chuck - Direct Thread
Dedicated M33 x 3.5mm.
Robert Sorby Pen Turning Set
The perfect pen turning tool set. All the tools needed to rough down the pen blank, clean up the ends and perfectly shape the finished pen.
Comprises 5/16" roughing gouge, 1/16" parting tool & 1/2" spindlemaster.
Rotur Deluxe Colleted Pen Turning Kit
The Rotur Deluxe Colleted Pen Turning Kit. This kit has been designed with the professional pen turner in mind, it has a unique colleted pen mandrel which only needs a quarter turn to clamp the shaft in place. Features a dust free collect which remains hidden.
The other parts supplied in this kit are: Spacers and Cones for assembly, Pen Blank Trimming Tool to square the ends of the blanks and 5...
Saburrtooth 1/4'' Cross Cutter - 1/2''
Shape: Cross Cut Eyecutter
Diameter: 1/2''
Head Length: 1/2
Saburrtooth 1/4'' Cross Cutter 1''
Shape: Cross Cut Eyecutter
Diameter: 1''
Head Length: 1"
Saburrtooth 1/4'' Cylinder - 1'' x 1'' - (Radius End)
Head Diameter: 1"
Head Length: 1"
Saburrtooth 1/4'' Cylinder 3/4'' x 1 1/4'' (Smooth End)
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/8'' Cylinder - 1/4'' x 1/2'' - (Smooth End)
Saburrtooth 1/8" Cylinder smooth end available in fine and coarse.
Head Diameter: 1/4"
Head Length: 1/2"
Saburrtooth 1/8'' Long Cylinder - 1/8'' x 1 1/4'' - (Smooth End)
Saburrtooth 1/8" Long Cylinder smooth end available in fine and coarse.
Head Diameter: 1/8"
Head Length: 1¼"
Saburrtooth 1/8'' Taper - 1/4'' x 1/2''
The Saburrtooth 1/8" Taper is a versatile carving tool designed for woodworkers.
With a head diameter of 1/4" and a head length of 1/2", it’s ideal for detailed carving and shaping tasks. Available in various grits (X Fine, Fine, Coarse), this tool provides excellent material removal while minimizing clogging. It’s perfect for creating fine details and smoothing surfaces...
Spare Blade for Lie-Nielsen No. 7 1/2 Low Angle Jointer
Replacement blade for the Lie-Nielsen No. 7½ Low Angle Jointer Plane. Comes with a 25° flat ground bevel.
2.300" wide x .240" thick
A2 cryogenically treated Tool Steel
Thomas Flinn Pax Reversible Mini Gent's Saw
A 4" version of the 10" Reversible Gents Saw, the saw is made to facilitate the right or left-handed worker. The cranked rosewood handle allows you to cut into even smaller awkward corners than the larger Reversible Saw.
This saw has a brightly polished brass back and a Walnut handle. Individually blister packed. 20tpi as standard.
