Sort By
Per Page
View
Grid
List
Auriou Locksmiths Rasp
This is a very typical old French combination shaped rasp. It is called a locksmiths rasp and has a large knife shaped end and a rat tail end.
It is 250mm overall (10 inches) and is used to shape mortises or grooves, not just by locksmiths nowadays but used by sculptors.
Grain 9.
Bee on a Comb - Greetings Card
Bee on a Comb is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
15cm x 15cm
Starrett Centre Punch Set
These Starrett 117 Centre Punches are made of specially selected steel which has been hardened and tempered which gives them good longevity.
They each have a knurled finger grip and the points are ground at an angle to give best results for each size.
The set includes the following sizes in a red vinyl case: 1/16", 5/64", 3/32", 1/8", and 5/32" (1.5mm, 2mm, 2.5mm, 3mm...
Pfeil Medium Sized Tools - Long Bent Gouge
Pfeil Medium Sized Tools for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The D7L Series 7 Long Bent Gouge is available in 10mm width.
Robert Sorby Honing Wheel Arbor
Honing wheel arbor to fit the ProEdge Sharpening Machine.
Also part of the Honing Kit (WPEPHONEKIT)
Set of 3 Narex Marking Knives
Set of 3 Narex Marking knives; 2.5mm, 1.2mm, & 0.75mm.
The Narex marking knife is an essential tool for creating marks on wood when laying out precision joinery or transferring measurements. The flat handle profile prevents the knife from rolling off the bench.
With the addition of laser cut finger indents which are useful for applying pressure closer to the tip.
Handle: Polished Rosewood...
.png "Last Ones!")
Saburrtooth 6mm Cylinder - 3/4'' x 1''
15% discount from price shown.
Veritas Lapping Kit Set of Five 2 oz Containers - 05M0101
Silicon carbide is ideal for flattening oil and water stones or lapping plane bottoms and blades. Just sprinkle the grit on a piece of glass or a steel lapping plate, add a shot of oil or water (as required), and lap the item flat. This fast and easy process lets you keep all of your stones dead flat.
A set of five 2 oz containers of 90x, 180x, 280x, 400x and 600x and instructions. 90x is used for...
Windsor Chairmaking
by James Mursell
Windsor chairs are a beautiful and traditional feature in any home. Some three hundred years of tradition lie behind chairs made today. While sound joints are essential, it is the sensitive shaping of each component that leads to a fine chair. This lavish book celebrates their history and explains their heritage. It compares and contrasts the distinct Windsor designs from England...
Blue Spruce Optima Bench Chisels - Set of 9
Blue Spruce Toolworks new Optima Chisels feature a lapped and polished back with a flatness measured in light bands (the same system used to measure silicon wafers). When you unbox your new Optima Chisels, they’re razor sharp and 100% ready to go to work.
Each Optima Chisel is machined from A2 tool steel, then double-tempered and cryogenically treated. The tempering and cryo treatments result...
Robert Sorby Set of 5 Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle.
This set of 5 comes in a cardboard presentation box and includes the following sizes: 1/4'', 3/8'', 1/2'', 3/4'' and 1''
Fitted with a tapered brass ferrule for comfort and elegance.
Gyokucho 616 Ryoba 300mm + Spare Blade
The Gyokucho 616 Ryoba 300mm with a spare blade.
Henry Taylor Woodcarving Punch - 3 Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Flexcut Quick Connect Long Handle SK103
This Flexcut Quick Connect Long Handle is a 4½'' Ash handle.
It has the same ease of inserting and removing the tool as the SK100 & SK102, it is just longer and its added length allows for greater power for larger tools.
The SK103 is our recommendation as the best handle for the SK120 Scraper Set.
Spare Blade for Lie-Nielsen Small Bronze Spokeshaves
Replacement blade for the Flat or Curved Sole Small Bronze Spokeshaves. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Henry Taylor Woodcarving Punch - Sun
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Tormek LA-124 Set of Optional Narrow Discs
For use with the Tormek Profiled Leather Honing Wheel LA-120. Includes two discs, one with a 2mm (3/32") radius and one with a 45° tip.
These smaller disc profiles permit the honing of small carving tools with very narrow profiles.
Tormek TC-800 Case
The Tormek Case keeps your jigs and accessories organized and is easy to carry thanks to the premium leather handle. The case is made of high-quality materials with a slidable lid that keeps everything in place.
These cases are stackable for easy storage and compatible with the new storage trays HTK-00, TNT-00 and T8-00. The storage trays are redesigned and made of EPP, a permanent construction...
![Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]](/images/products/small/3937_10049.jpg "Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]")
![Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]](/images/products/small/3937_10052.jpg "Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]")
Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]
Ergonomically shaped handle for optimum comfort with a straight 38mm blade with fine a point for detail work.
New, old stock in original packaging.
Described as a detail knife.
Beading Tool Set
Robert Sorby bead forming tools to cut perfect semi-circular beads every time.
The nose design permits multiple bead designs.
This ia a boxed set of 5 RS-835H Bead Forming Tools 1/8", 3/16", 1/4", 5/16" & 3/8" .
Bessey TW16-2K 3/4'' Bench Hold Down
The Bessey Hold Down Clamp with the 19mm adaptor to work on workbenches with 3/4" holes.
Clamping depth 100mm.
Max. clamping height 200mm.
High quality 2-component plastic handle with smooth-running trapezoidal threaded spindle.
Includes the 19mm (3/4") adaptor.
If you are looking for this to work with a workbench which has 1" holes (such as the Sjoberg Elite range)...
Brusso Jig TJ-680
For Brusso quadrant hinges HD680.
Flexcut 5 Piece Lino & Relief Printmaking Set SK130
This Flexcut 5 piece Printmaking Set contains 4 carving blades, a quick connect ABS handle, 11 pocket tool roll, as well as a custom strop and polishing compound.
Relief printing is based on a reductive process - carve the non image away from a flat, level surface and ink the remaining top surface with a roller or brayer in order to print the image.
Profiles included:
SK306 #6 x 5/16''
SK309...
Gyokucho Multi-Purpose Folding Saw
Blade Length : 200mm.
Overall Length : 415mm (235mm closed).
Max Cutting Depth : N/A.
Teeth Pitch / TPI : 2.2mm 11.5.
Blade Thickness : 0.7mm.
Teeth Pattern : Universal.
Gyokucho Product Number : 810.
Weight : 210g.
Replacement Blade : S810
A bit of a Swiss Army knife as this saw can work on many different materials such as softwoods and hardwood (not exotics), wet timer (greenwood),...
Hamlet Big Brother
Hamlet Big Brother is the complete set consisting of Multi Handle (26''), 1/2'' cutter, edge protector and a 5/8'' straight stem.
Does not include reducing collets, side handle or hollowing gate, but these are available separately.
Hamlet Multi-Tip Scraper & Cutters
This versatile tool from Hamlet comes with three inter-changeable tips, which can be oriented to any position to give the most suitable angle of presentation to the work.
The three tips/cutters are round, pear and square in shape.
Handle is 10'' in length
Hock Carving Knives - Set of 5
The blades of these comfortable carving knives are made from Hock's high carbon steel, hardened to Rc62 (if that sounds familiar it's because that's the same steel and hardness as Hock's high-carbon knives and plane blades) easy to hone to the sharpest possible edge.
The lengths listed are an approximate blade length.
The set includes: 1" Carving Knife, 1¼" Carving Knife, 1" Chip Carver Knife,...
Lie Nielsen No.66 Iron Beading Plane
This Beading Tool can quickly produce a wide range of decorative profiles without the fuss and fiddle of setting up an electric router.
Derived from an early, generously proportioned Stanley No. 66, it has a Ductile Iron body and Bronze blade clamp. Two Bronze fences are included, one for curved work and one for straight work, and can be adjusted along the slot across the bottom of the tool.
The...
Saburrtooth 1/4'' Dove Tail 3/4'' x 1 1/4'' (Smooth End)
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/8'' Burrs Set - Coarse
This set of 1/8'' burrs from Saburrtooth includes the following in Coarse (green):
18BN14 Ballnose
18C14 Cylinder
18F38 Flame
18S38 Sphere
18BUD14 Bud
Saburrtooth Supreme 1/4' Sphere 7/8' x 7/8'
Head Diameter: 7/8"
Head Length: 7/8"
Veritas Joiner's Knife
With a design that is both practical and elegant, this joinery knife is an adaptation of the popular Veritas carving knife.
Like their carving knife, it has a brass collet designed for use with standard disposable scalpel blades, holding the blade firmly and allowing quick, easy blade changes. The handle is turned from torrefied maple, with a contoured shape that permits a comfortable, controlled...
Woodpeckers Micro Combination Square
Woodpeckers new Micro-Squares go where other squares just can't fitting in the narrow openings of your precision joinery. The small combination square includes two blades, one 1/2'' wide and one 1/4'' wide.
The 1/4'' is ideal for checking the cheeks of tiny dovetail sockets and the walls of mortices. The 1/2'' blade handles the more general work such as layout,...
Crown Tools Thin Parting Tool - 1/16'' (1.6mm)
This is Crown Tools Thin Parting Tool, width 1/16''.
Thin parting tools allow for very fine parting which is useful where you need the grain to match ie boxes, vases etc.
Sharpening - all parting tools can be sharpened with a fine stone but using a light touch on the grinder gives a useful litte burr which cuts a cleaner edge.
M2-HSS (High Speed Steel)
Stained beech handle.
Walleted.
Flexcut Double Bevel Sloyd Hook Knife KN51
The Flexcut Double Bevel Sloyd Hook Knife is ideal for carving spoons, bowls, ladles and other deep hollowed work.
It features a double-sided blade with a square, sharpened end. For added strength, the tang of each knife extends completely through the beautifully conditioned Cherry hardwood handle. It also features a brass ferrule for added stability. The overall length of this knife is 8½"...
Flexcut Pro Series 1 5/8'' Carving Knife FP02
The 1 5/8'' Flexcut Pro Carving Knife features a versatile, full flat grind sheepsfoot blade in precision, heat-treated 1095 steel, polished to a brilliant mirror finish.
This knife is great for all around carving work. The medium blade length, slim profile, and detail tip provides enough reach for tough cuts while maintaining full control.
Flexcut Skew Knife KN11
The Flexcut skew carving knife is used for taking more vertical cuts where room is limited for a conventional whittling stroke.
Blade length 5/8''
Flexcut Single Bevel Sloyd Hook Knife KN52
The Flexcut Single Bevel Sloyd Hook Knife is perfect for forming the hollows of spoons and bowls.
The deeply curved, single-edged blade is sharpened all the way to the pointed tip. For added strength, the tang of each knife extends completely through the beautifully conditioned Cherry hardwood handle. It also features a brass ferrule for added stability. The overall length of this knife is 8"...
Pfeil Sculpture's Adze
The Pfeil Sculptor's Adzes follow old French designs.
Available with Straight, Curved or Round blades, these tools are forged from quality tool steel, hardened and sharpened with Hickory handles.
Straight:
Overall length 450mm (about 18").
Weight 800gms.
Cutting edge of 65mm.
Curved:
Overall length 450mm (about 18")
Weight 850gms.
Cutting edge of 60mm.
Round:
Overall...
Spare Blade for Lie-Nielsen No. 3 Smoothing Plane
Replacement blade for Lie-Nielsen No. 3 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish...
Hamlet Hollowing Gate
Available in 19mm (3/4") and 25mm (1"). Other stem sizes can be made to order, but will have a longer lead time.
Burn
by Ben Short
Crown Tools Pro PM Bowl Gouge
The Pro-PM is an exclusive range for Crown Tools and is the elite if all turning chisels.
Made from advanced Power Metal, the molten steel has been compressed and sintered giving the Pro-PM turning tools a cutting edge which Crown Tools claim will last up to four or five times that of a conventional High Speed Steel tool.
The chisels are hardened to between 66 degree and 69 degree Rockwell, enabling...
Gyokucho Blade for Fugaku Folding Dozuki 240mmm Rip (111)
Replacement for the Gyokucho #111 saw
Leather Sheath for the Veritas Hacking Knife
Hacking Knife sold separately.
Robert Sorby Diamond/Side Cut Scraper
The Robert Sorby diamond/side cut scraper can be used on square bottomed boxes the end profiles allows the tool to create a right angled juncture between side wall and bottom. The 85º angle at the end prevents the tool from cutting th eside wall and the bottom at the same time.
3/4" Diamond/Side Cut Scraper - 16" with handle.
Flexcut Power Gouge Interchangeable Handle RG102
Allows any RG range reciprocating gouge to be used as a hand tool.
Robert Sorby Buffing Mop
Buffing Mop to fit the ProEdge Sharpening Machine.
Also part of the Buffing Kit (PEBUFFKIT)