Sort By
Per Page
View
Grid
List
Above the Smokehouse - Greetings Card
Above the Smokehouse is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting
21cm x 10cm (DL)
Kutzall 1/4'' Taper Burr - 3/4'' x 1-1/4''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Nakaya Dozuki 240mm Japanese Folding Saw
Blade 0.3mm thick
Spacing 1.5mm for cross cut and rip cut
James Barry Diamond File Tapered 3''
3" (81mm) versatile half round and flat tapered 400 grit file.
Precision ground steel file electroplated with 400 grit monocrystalline diamonds to ensure a superb even finish and finished with a split ergonomic handle pinned through the steel file and finished with a hanging hole for storage. Suitable for sharpening many woodworking tools including router cutters, forstner bits, woodturning...
Mastercarver Flex-Shaft Essential Set
The Mastercarver Flex-Shaft Essential Set includes the following maintenance items:
Spare Inner Flex-Shaft x2
Spare Outer Sheath x1
Pro Flex-shaft Lube x1
Note: parts will fit on all 1/2hp, 1/3hp & 1/4hp Mastercarver® Flex-shaft motors from 1985 to present.
Includes instructions.
Robert Sorby 1/4'' & 1/2'' Bead Cutting Tip
The Robert Sorby Bead Cutter is one of five additional cutters available for the popular Robert Sorby Multi-tip Hollowing Tool. This double sided cutter will cut beautiful beads on spindle work at 1/4" and 1/2" and is one of two beading cutters available for this tool.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity...
Auriou Locksmiths Rasp
This is a very typical old French combination shaped rasp. It is called a locksmiths rasp and has a large knife shaped end and a rat tail end.
It is 250mm overall (10 inches) and is used to shape mortises or grooves, not just by locksmiths nowadays but used by sculptors.
Grain 9.
Bee on a Comb - Greetings Card
Bee on a Comb is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
15cm x 15cm
Starrett Centre Punch Set
These Starrett 117 Centre Punches are made of specially selected steel which has been hardened and tempered which gives them good longevity.
They each have a knurled finger grip and the points are ground at an angle to give best results for each size.
The set includes the following sizes in a red vinyl case: 1/16", 5/64", 3/32", 1/8", and 5/32" (1.5mm, 2mm, 2.5mm, 3mm...
Pfeil Medium Sized Tools - Long Bent Gouge
Pfeil Medium Sized Tools for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
The D7L Series 7 Long Bent Gouge is available in 10mm width.
Robert Sorby Honing Wheel Arbor
Honing wheel arbor to fit the ProEdge Sharpening Machine.
Also part of the Honing Kit (WPEPHONEKIT)
Arbortech Precision Carving System
The Arbortech Precision Carving System is designed for free form carving, sculpting, detailing and texturing.
The system consists of a Universal Base, which fits onto either the Arbortech Power Carving Unit or a 100mm or 115mm angle grinder with an M14 thread. Into this base you have the choice of attaching either the Ball Gouge, Barrel Carver or Drum Sander. The system also contains two sanding...
Henry Taylor Woodcarving Punch - Diamond
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Veritas Lapping Kit Set of Five 2 oz Containers - 05M0101
Silicon carbide is ideal for flattening oil and water stones or lapping plane bottoms and blades. Just sprinkle the grit on a piece of glass or a steel lapping plate, add a shot of oil or water (as required), and lap the item flat. This fast and easy process lets you keep all of your stones dead flat.
A set of five 2 oz containers of 90x, 180x, 280x, 400x and 600x and instructions. 90x is used for...
Robert Sorby ProEdge Knife Holder Small
The Robert Sorby ProEdge Small Knife Holder can be used for pocket knives, carving knives and blades up to 8" long.
Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).
Blue Spruce Optima Bench Chisels - Set of 4
Blue Spruce Toolworks new Optima Chisels feature a lapped and polished back with a flatness measured in light bands (the same system used to measure silicon wafers). When you unbox your new Optima Chisels, they’re razor sharp and 100% ready to go to work.
Each Optima Chisel is machined from A2 tool steel, then double-tempered and cryogenically treated. The tempering and cryo treatments result...
Lie-Nielsen No.1 Iron Smoothing Plane
The Lie-Nielsen No.1 Smoothing Plane in iron. This is based on the famous (and somewhat scarce) Stanley No.1. The size makes it more comparable to a block plane than a smoother but nonetheless this small bench plane is suitable for detail work.
5-1/2" (14cm) long
Blade is 1-3/16" (3cm) x .110" (2.79mm) thick.
Weight is 1.35 lbs. (612 grams)
Veritas Tail Vice
This vise can be used for both types of tail vise - with or without a shoulder. It has guide plates 2" wide by 15" long. The maximum opening is 8" (less the thickness of your wooden jaws).
The single-lead Acme screw is 7/8" in diameter.
Made in Canada. Patented.
Windsor Chairmaking
by James Mursell
This book is the first new book about the making and design of Windsor chairs for over 10 years. James Mursell has written it with a broad readership in mind. It is aimed not only at existing Windsor chairmakers but also at those who are perhaps contemplating making their first chair.
Detailed plans are included for two English and two American chairs. It is also aimed at those...
Blue Spruce Optima Bench Chisels - Set of 9
Blue Spruce Toolworks new Optima Chisels feature a lapped and polished back with a flatness measured in light bands (the same system used to measure silicon wafers). When you unbox your new Optima Chisels, they’re razor sharp and 100% ready to go to work.
Each Optima Chisel is machined from A2 tool steel, then double-tempered and cryogenically treated. The tempering and cryo treatments result...
Flexcut Quick Connect Long Handle SK103
This Flexcut Quick Connect Long Handle is a 4½'' Ash handle.
It has the same ease of inserting and removing the tool as the SK100 & SK102, it is just longer and its added length allows for greater power for larger tools.
The SK103 is our recommendation as the best handle for the SK120 Scraper Set.
Henry Taylor Woodcarving Punch - 4 x 2 Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Robert Sorby Standard Gouge Jig
Allows easy sharpening of all standard ground woodworking gouges.
Henry Taylor Woodcarving Punch - Asterisk with open centre
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Diamond Pattern
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Tormek Handbook
The Tormek handbook is included with each machine. It gives you the basics of sharpening and different techniques as well as user instructions and valuable tips for each jig and how to sharpen specific tools.
More than 600 detailed line drawings show, step by step, how best to sharpen most type of edge tools with the unique Tormek method. The updated design with wire-o-binding and plastic cover...
![Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]](/images/products/small/3937_10049.jpg "Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]")
![Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]](/images/products/small/3937_10052.jpg "Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]")
Flexcut KN13 - Detail Carving Knife [Clearance, SOLD]
Ergonomically shaped handle for optimum comfort with a straight 38mm blade with fine a point for detail work.
New, old stock in original packaging.
Described as a detail knife.
Tormek TC-800 Case
The Tormek Case keeps your jigs and accessories organized and is easy to carry thanks to the premium leather handle. The case is made of high-quality materials with a slidable lid that keeps everything in place.
These cases are stackable for easy storage and compatible with the new storage trays HTK-00, TNT-00 and T8-00. The storage trays are redesigned and made of EPP, a permanent construction...
Arbortech Replacement Belt for Mini Carver
Replacement drive belt for use with the Arbortech Mini Grinder (ref: MIN350), M4 version Mini Turbo Kit and Mini Carver.
Arbortech Turbo Scraper
The Arbortech TURBO Scraper™ is like a turbocharged version of a traditional hand scraper. It has been specifically designed to cut on a negative angle resulting in minimal tear-out and chipping.
This disc can be controlled by pressure and gently scrapes away at wood, delivering a smooth, scratch-free finish. Its unique design provides unparalleled accuracy, allowing you to see your carving...
Beading Tool Set
Robert Sorby bead forming tools to cut perfect semi-circular beads every time.
The nose design permits multiple bead designs.
This ia a boxed set of 5 RS-835H Bead Forming Tools 1/8", 3/16", 1/4", 5/16" & 3/8" .
Bessey TW16-2K 3/4'' Bench Hold Down
The Bessey Hold Down Clamp with the 19mm adaptor to work on workbenches with 3/4" holes.
Clamping depth 100mm.
Max. clamping height 200mm.
High quality 2-component plastic handle with smooth-running trapezoidal threaded spindle.
Includes the 19mm (3/4") adaptor.
If you are looking for this to work with a workbench which has 1" holes (such as the Sjoberg Elite range)...
Brusso Jig TJ-680
For Brusso quadrant hinges HD680.
Flexcut 5 Piece Lino & Relief Printmaking Set SK130
This Flexcut 5 piece Printmaking Set contains 4 carving blades, a quick connect ABS handle, 11 pocket tool roll, as well as a custom strop and polishing compound.
Relief printing is based on a reductive process - carve the non image away from a flat, level surface and ink the remaining top surface with a roller or brayer in order to print the image.
Profiles included:
SK306 #6 x 5/16''
SK309...
Flexcut Pro Series 1 3/8'' Detail Knife FP01
The 1 3/8'' Flexcut Pro Detail Knife features a narrowly tapered full flat grind wharncliffe blade in precision, heat treated 1095 steel, polished to a brilliant mirror finish.
This knife excels at precise detail carving work. The shorter blade length, slim profile, and narrower detail tip provides the highest level of precision and control.
Hamlet Big Brother
Hamlet Big Brother is the complete set consisting of Multi Handle (26''), 1/2'' cutter, edge protector and a 5/8'' straight stem.
Does not include reducing collets, side handle or hollowing gate, but these are available separately.
Hamlet Multi-Tip Scraper & Cutters
This versatile tool from Hamlet comes with three inter-changeable tips, which can be oriented to any position to give the most suitable angle of presentation to the work.
The three tips/cutters are round, pear and square in shape.
Handle is 10'' in length
Lie Nielsen No.66 Iron Beading Plane
This Beading Tool can quickly produce a wide range of decorative profiles without the fuss and fiddle of setting up an electric router.
Derived from an early, generously proportioned Stanley No. 66, it has a Ductile Iron body and Bronze blade clamp. Two Bronze fences are included, one for curved work and one for straight work, and can be adjusted along the slot across the bottom of the tool.
The...
Robert Sorby Bowl Reversing Jaws
Robert Sorby Bowl Reversing Jaws are designed for finishing the outside and foot of a bowl. Lightweight, but extremely strong solid aluminium construction with 10 different location points to hold a variety of sizes of bowl. Rubber grips hold the project in place without causing damage.
Maximum bowl diameter 9". 10" capacity over bed bars.
The photo shows the Bowl Reversing Jaws fitted to a...
Saburrtooth 1/4'' Concave - 1/2'' x 3/4''
Head Diameter: 1/2''
Head Length: 3/4''
Saburrtooth 1/8'' Dove Tail Acute - 3/8'' x 3/8''
15% discount from price shown.
Saburrtooth Supreme 1/4' Sphere 7/8' x 7/8'
15% discount from price shown.
Spoon Carving: From Log to Spoon
Whatever your experience, this book has all the instructions you need to carve beautiful spoons from logs of green wood. Author Alex Finberg walks you through every stage of the process with clear explanations and some 400 stunning photos. At the core of the book is a 25 step sequence that illustrates how to carve functional cooking spoons and beautiful eating spoons from a log. This guide will inspire...
Surfer Airplane Wooden Kit
The new Sky Surfer launches planes in a predictable and repeatable way – for testing your airplane designs so you can figure out the best way to make planes for long flights, returning flights and those fancy trick flights like loop-de-loops, and landing in the cat bowl.
An easy to make and use kit with foam pads, extra elastics and a world of great individual and family fun – learning...
Veritas 14 Degree Dovetail Marker
For quick, accurate marking of dovetails, a dovetail marker is the best tool available.
With riding ledges on both sides, these 2" × 2" markers can be flipped over to mark both slopes of the dovetail. They are designed so that the entire ledge is riding on the reference face, even when marking edge dovetails. The relieved corners at the join of the body and the riding ledges ensure...
Veritas Miniature Bench Vice
When you’re working on projects with the Veritas miniature tools, this appropriately sized front vise provides a means to hold them. At 7 9/16'' (192mm) long, 4 7/16'' (112mm) wide, 1 1/8'' (28mm) tall and just over 16 oz (453g), it matches the scale of the other miniature tools but is a robust vise in its own right. Built into a 1:3 scale bench or a tabletop work surface,...
Clifton No.3 Smoothing Plane
A Clifton No.3 Smoothing Plane. This is the smallest smoothing plane Clifton make; ideal for those with smaller hands, or those with smaller jobs that don't require so much heft.
Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment of the mouth.
Blade is cryogenically treated O1 steel, heated to 60-62 Rockwell. Cutter...
Crown Tools Thin Parting Tool - 1/16'' (1.6mm)
This is Crown Tools Thin Parting Tool, width 1/16''.
Thin parting tools allow for very fine parting which is useful where you need the grain to match ie boxes, vases etc.
Sharpening - all parting tools can be sharpened with a fine stone but using a light touch on the grinder gives a useful litte burr which cuts a cleaner edge.
M2-HSS (High Speed Steel)
Stained beech handle.
Walleted.