Sort By
Per Page
View
Grid
List
Lie-Nielsen Tongue & Groove Plane - 3/4''
The Lie-Nielsen Tongue & Groove plane cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one piece blade registers on the milled body casting, to ensure squareness and equal depth of cut on both sides. Since this is a heavy stock removal tool no depth adjuster is needed.
Comes with a 3/16'' (4.8mm) thick A2 steel...
Table for 1 1/2'' Wheels for Veritas Grinder Tool Rest
This replacement table for the Veritas grinder tool rest has a wider slot to let you use it with 1 1/2" wide wheels (like 8" CBN wheels).
The 4" wide aluminum table has a 1 5/8" wide slot and installs easily in place of the standard table. It has the same horizontal slot and center hole for use with sliding and rotating jigs.
(For wheels narrower than 1 1/2", the standard...
Blue Spruce Optima Mortise Chisels - Curly Maple
Blue Spruce Toolworks new Optima Chisels feature a lapped and polished back with a flatness measured in light bands (the same system used to measure silicon wafers). When you unbox your new Optima Chisels, they’re razor sharp and 100% ready to go to work.
Each Optima Chisel is machined from A2 tool steel, then double-tempered and cryogenically treated. The tempering and cryo treatments result...
Shaker Inspiration
Five Decades of Fine Craftsmanship
Shinwa Protractor No.19 Chrome Finish
Measures 0 - 180° with a reverse scale.
150mm stainless steel blade with a hard chrome coating for easy reading (and a 100mm scale).
90mm wide body.
Thomas Flinn Pax 1776 Tenon Saws
Available in lengths 10" and 12" with 13 or 15 tpi, in either Rip (for cutting with the grain) or Crosscut (for cutting across the grain) formation.
Blade depths are as follows:
10" Blade length = Blade depth 2"
12" Blade length = Blade depth 2 1/2"
These Pax 1776 saws are the premium range made by Thomas Flinn & Co in Sheffield, England. The tenon saws are...
Veritas Magnetic Saw Guides
This anodised aluminium Veritas Magnetic Saw Guide helps keep your saw on the right track and perpendicular to a workpiece. It provides a registration surface about 32mm tall. It is particularly useful when crosscutting tenon shoulders or the edges of a dado, which is where you want your saw to cut straight and true. You can hold the guide onto your workpiece with a hand or secure it with clamps.
The...
Pfeil Long Bent 60° V Tool - Series 12L
These tools are used for shaping recesses and working in corners.
Pfeil Series 2a L - Spoon Bent Gouge - Left Skew
The Pfeil Series 2a L Spoon Bent Gouge (Left Skew) is an essential tool for woodcarvers who require precision and control when working on recessed or rounded surfaces. This left-skewed gouge, with its shallow sweep, is ideal for shaping and detailing in tight spaces, making it perfect for intricate carving tasks.
Key Features:
Left-Skewed Design: Provides easier access to challenging areas,...
Pfeil Carver's Slipstone
The Pfeil Carver's Slipstone is an Arkansas stone used for honing gouges and V parting tools.
The grit is in the region of 8000.
The size of the slipstone is approx 110mm x 40mm x 8mm
Use with a light honing oil.
Arkansas stones are among the hardest and finest honing stones.
Veritas Miniature Wonder Dog
This 1:3 scale version of the Veritas Wonder Dog is especially useful for securing small work horizontally. Sized to fit in a 17/64'' dog hole, it has a 1 1/2'' long stainless-steel post with an O-ring for slightly elevated clamping.
At 3/4'' wide and 1/4'' high, the brass head will not mark tools or workpieces. The clamping screw provides approximately 1 1/4''...
Knew Concepts 6 1/2'' Coping Saw
On the Knew Concepts Coping Saw the blade is tensioned by a cam-lever and pulls so taut that the blade "sings" when plucked. Chris Schwarz said "...it's more like sawing with an unbendable wire than a floppy steel hotdog (which is what is typical of most saws)". Make turns that are tighter than ever before.
The solid steel indexing blade-hooks lock in eight 45° positions...
Veritas Wood Carver's Vice
A good carver's vice should be adjustable in all three axis. This one has full rotation in two axes and 3" of height adjustment in the third axis. But more important, it has controlled release; when you relieve the clamping pressure, a combination of internal springs and O-rings provides residual resistance so that your work does not suddenly fall or rotate. You can reposition the work and...
Leadwood
Leadwood is well suited to turning and carving. Dark brown heartwood with blackish streaks. Hard, heavy and durable. Sandpapers, varnishes and oils well to a high lustrous finish.
Veritas Carvers Drawknife (with PM-V11 blade)
An ordinary drawknife is too large for most carving - the Veritas drawknife is designed for ease of use with maximum control.
The teardrop-shaped handles are cocked at 45° to the blade and nestle comfortably in your hands. The polished 4" x 1/8" x 3/4" blade is ground and honed to a perfect edge, and is supplied with a blade guard.
The drawknife blade is custom made for us...
Auriou Roughing Rasp
This is the 'hog' that reduces your band saw blank to more closely resemble to the shape you want (think cabriole leg, guitar neck, gun stock, decoy duck blanks etc)
Flat and half round tapered section, grain 3. the rasp (excluding the handle) is 12" (300mm) long.
Available in left or right handed models.
The address position for holding your rasp is slightly skewed across the grain (just...
Clifton No.4 1/2 Smoothing Plane
A Clifton No.4 1/2 Smoothing Plane.
A quality British made woodworking plane made in Sheffield.
This is a real beauty, and weighs in at an impressive 2.5kg. It's the largest of the three smoothers from Clifton, so ideal when you need something a bit wider than the no.4. Polish the blade, and set the plane up for a fine shaving, and you will be left with a surface to be proud of.
Bedrock...
Stones for Carving Tools
Used to create the finest edge on precision tools, delicate instruments, and die work. RH Preyda Arkansas files hold their shape while creating the finest, most uniform finish.
These Carving Tool Forms are designed to accommodate the various shapes and gauges of V-tools. The dimensions and specifications of each stone will match tools ranging from ultra-flat to semi-circular and a variety of curves...
Henry Taylor Swan Neck Chisel 1/4''
A Henry Taylor swan neck chisel is used to clean the bottom of mortices. The chisel is levered in use, not struck.
Available in 1/4".
Lie-Nielsen No.4 Bronze Smoothing Plane
Lie-Nielsen's smoothing planes are precision machined from a manganese bronze casting, or an iron casting. They all come with a beautifully formed handle and knob made from American cherry. They have the Stanley Bedrock style frog which gives a fully machined mating fit between the frog and body. You can move the frog backwards or forwards, allowing the opening or closing of the plane's mouth...
Pax Burnisher
Used in conjunction with Cabinet Scrapers to hone their edges after use.
* Walnut handle with Brass Ferrule
* Steel blade
* Puts burr back on Cabinet Scrapers to keep their edges sharp
Tormek Turning Tool Setter
The Tormek Turning Tool Setter TTS-100 is the key to an efficient sharpening of woodturning gouges and skews. It enables you to exactly create and replicate the edge angle on your bowl and spindle gouges as well as on your flat or oval skews with either a straight or a curved edge.
TTS-100 works in conjunction with the Gouge Jig SVD-186 and the Multi Jig SVS-50.
By knowing your exact profiles,...
Benchcrafted Split Top Roubo Plans
This Benchcrafted Split Top Roubo bench plan is based on Andre Roubo's bench from Plate 11 of L'Art du Menuisier, with the added capabilities of the Benchcrafted vices. Benchcrafted developed this plan so woodworkers could build a bench using the Benchcrafted Tail Vice and Glide Leg Vice without having to figure out all the details. Simply follow the measured drawings and instruction notes.
The...
Veritas Hardware Kits for Wooden Spokeshaves
Traditional wooden spokeshaves are still popular tools, despite modern alternatives that offer better control over depth of cut.
Typical spokeshave blades have tangs that wedge into holes in the tool body. Cut depth is adjusted by tapping the tang ends or the base of the blade. Many users find ways to refine this haphazard process, but most require a screwdriver or other tool, or the blade must...
Veritas String Inlay Tool System
Used much like a marking gauge, this inlay tool lets you accurately cut narrow grooves in a workpiece as well as neatly slice fine strings from a sheet of veneer. Its interchangeable blade system lets you quickly swap blades to suit the activity.
The hook-shaped blade is designed to cut grooves. Used in a sweeping push-pull motion, it has outlining spurs on one side of the blade to score the groove...
Depth Stop for Lie-Nielsen 271 Small Router Planes
Brass depth stop makes it easy to cut predetermined depth repeatedly.
Crucible Planing Stop
We have always loved blacksmith-made planing stops, which are embedded in the end of a block of wood that is about 3” x 3” x 12”. The block is friction-fit into a mortice in the benchtop and moves up and down with mallet taps.
In our experience, the planing stop is as important as the workbench’s face vice and has almost-endless uses.
The main problem with a blacksmith...
Pfeil Brienz Carving Knives
Pfeil Brienz carving knives are detail carving knives designed by the Brienz Woodcarving School.
Large - 190mm total length, blade 75mm
Small - 170mm total length, blade 60mm
Image shows the large knife.
Flexcut Pro Series 1 3/8'' (35mm) Detail Knife FP01
The 1 3/8'' (35mm) Flexcut Pro Detail Knife features a narrowly tapered full flat blade in precision, heat treated 1095 steel, polished to a brilliant mirror finish.
This knife excels at precise detail carving work.
The shorter blade length, slim profile, and narrower detail tip provides the highest level of precision and control.
Glenn Lucas French Curve Scrapers
Glenn Lucas French Curve Scraper in various sizes
1 3/8'' x 3/8'' French Curve Negative Rake Scraper with 16'' handle ideal for refining the curves on bowls and platters
1 1/4'' x 5/16'' French Curve Scraper with a 16" length handle
Gransfors Bruk Swedish Drawknife 486
The Gransfors Swedish Drawknife is a big beast and popular for quick removal of bark from logs and other large trimming work. The hickory handles are set on full-length tangs extending straight out from the ends of the blade. The blade is bowed up and curved forward in the centre for effective peeling, shaping and smoothing.
The total length is 22 1/2''. The blade is 11 1/2'' in...
Kirjes Long Cylindrical Sander - 28 x 80mm Drum
This Kirjes Long Cylindrical Drum Sander is 28 x 80mm.
Comes with one 220 grit sleeve. Additional sleeves available separately.
The sanding cloth material is highly flexible and made of the very best quality, sanding not only wood but also metals, plastic, bone and horn.
The sharpness of the abrasive lasts a long time, however, we highly recommend using a cleaning stick to considerably extend...
Veritas Trammel Points
Usable on any rule up to 1/4" thick, these narrow-bodied trammels can be set to reproduce radii as little as 9/16". The removable points score clear lines on any wood, and are also effective on aluminium, brass, bronze and mild steel. With the points removed, the trammel bodies double as square gauges, clamping onto a square to make repetitive angle marking easy. Inspired by an antique trammel...
Accessories for the Benchcrafted Drawsharp
Rehab kit
Most knives will be in good enough condition to use the abrasives included with the Drawsharp. But for those which require more aggressive material removal (removing knicks or severely blunted edges) or for those who may not want to grind their knife, Benchcrafted offer a rehab kit with medium and coarse diamond abrasives. The kit includes two sleeves and two each of coarse and medium diamond...
The Robert Sorby ProEdge Ultimate Sharpening System
The updated version of the ever popular Robert Sorby ProEdge sharpening system. In all honesty the machine has remained the same as nothing really needed to be updated!
Robert Sorby have however changed from using the old terms of 'Basic' and 'Deluxe or Plus'. Thankfully it has been simplified, and the Sorby machine comes in one edition which includes a single 120 grit aluminium...
Famag Lewis Auger Bits
Famag Lewis Auger Bits in two lengths.
Overall Length 235mm Spiral Length 160mm
Overall Length 460mm Spiral Length 380mm
A "Lewis" pattern consists of a main self tapping thread which pulls the bit through the cut and two cutting edges.
This version has a stepped head and is used for drilling deep holes in soft wood and European hard wood with power drill and joinery machines.
Due...
Rob Cosman Dovetail Saw
Rob describes the first of his hand saw offerings, the dovetail saw. After teaching thousands of folks to cut dovetails by hand, Rob has tailored a saw to address the most common problems. With the intent to enable woodworkers to assemble their dovetails straight from the saw this may very well be the missing link!
Unique features include:
Split lines with the Super Fine 22tpi starting tip,...
Veritas Fluting Blades for Combination Planes
For use with the combination plane, these blades are used to create decorative concave fluting on workpieces. The PM-V11 steel blades are available in 3/16", 1/4", 3/8" and 1/2" flute diameters. Made in Canada.
Making Traditional English Wooden Eating Spoons
By Eric Rogers
Learn how to make traditional English wooden eating spoons with Eric Rogers
Of all the materials used by our forefathers wood was undoubtedly the most common but is the least represented in museums today.
Churches and timber framed houses preserve some of the grander uses of wood but very few everyday artifacts survive.
Tens of thousands of wooden spoons must have been thrown...
Brusso Brass Recessed Pull CP-150
The Brusso CP-150 brass minimalist recessed pull is designed for cabinets and fine furniture. It may be either surface or flush mounted. The pull measures 1½" in diameter.
Diameter: 1.500" - 1½" - 38mm
Depth: 0.500" - ½" - 13mm
.png "Last Ones!")
Pegas Double Tooth Blades
Pégas Double Tooth Scroll Saw Blades are a popular blade due to the excellent blend of the tooth/skip pattern. Double tooth blades contain sets of closely pitched teeth that aid in producing a fine finish and the skip adds the benefit of effective chip removal. Thickness of work range 1/16 inch to 2-1/2 inch. Double tooth blades perform well with wood, plastic, bone, Corian and most fibrous...
Nakaya Universal Dozuki Saw
The Nakaya Classic Universal Dozuki saws have a combination of cross-cut and rip-cut teeth, making them ideal for joinery work. Dozuki refers to the backed spine, which lends it self to cutting dovetail, tenons, and other detail-oriented cuts where accuracy matters.
Replaceable blade made from high-quality Japanese steel.
Combination cross and rip-cut teeth.
Ultra-thin blade:...
Lost Art Press - 5 Woodworking Pencils
Traditional school pencils aren't ideal for woodworking. The pencils and lead snap too easily in use. And the eraser is a joke (Lost Art Press have a recommendation below).
After Lost Art Press tested many different combinations of lead (called the “core”) and diameters, this pencil became their shop favourite. It is robust because of its diameter and the fact that it is round....
Knew Concepts Slip-on Foam Comfort Grip
The foam grips are available only for the Knew Concepts Mk.III, Mk.IV, and titanium hand saws.
The simplest way to reduce the stress on your hands of long hours of sawing is to increase the diameter of the saw’s handle.
This is where the Knew Concepts new Comfort Grips come in: they increase the diameter of the saw’s handle without adding weight, while they also make the handle...
Lynx Convex Scraper Set
The Lynx Convex scraper set contains 2 scrapers that are specifically shaped to scrape in recesses such as on skirting boards etc. The high grade steel used on these scrapers, has then been cut with various convex areas on the scraper to suit various sized areas.
The convex areas are the following sizes:
Scraper 1 - 1/4", 3/8", 1/2", 3/4" and 5/8"
Scraper 2 - 7/8",...
Brusso Brass Butt Hinge CB-301
The Brusso CB-301 full mortice butt hinge, milled from heavy brass stock, is the smallest of four versions manufactured for boxes and small cabinets. It measures 3/4" x 13/16".
Length: 0.750" - 3/4" - 19mm
Width: 0.813" - 13/16" - 21mm
Leaf Thickness: 0.086" - 5/64" - 2mm
NOTE - All Brusso hinges come in PAIRS. Screws are INCLUDED (brass for the brass...
Connells Leather Apron
Connell apron 36 inch - hand-made in the UK from high-quality moss backed leather that offers good resistance.
British nickel plated rivets are used for extra strength and durability.
Large front pouch enables storage of small tools and accessories.
Fastens with ties at the back which are also long enough to double back and tie at the front if it needs to be tighter.
Guaranteed against...
Saburrtooth 1/4'' Flame - 1/2'' x 3/4''
Head Diameter: 1/2"
Head Length: 3/4"