Sort By
Per Page
View
Grid
List
Lie-Nielsen 9 Tool Chisel Roll
9 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
Pfeil Polishing Cream
Pfeil polishing cream for strops.
50ml.
Approximately 4000-6000 grit.
Gransfors Bruk Splitting Hatchet 439
The splitting Hatchets blade starts off concave and fairly thin, allowing easy penetration into the wood, where upon the thickening axe head exerts enormous splitting pressure. The small splitting axe, with 2½ lb. head, 2½" face & 16" textured hickory handle, is ideal for splitting kindling & smallish stove wood. It is designed for one-handed use. Note this axe’s poll is not hardened for use...
Tormek Adjustable Tool Rest
With the Tormek Adjustable Tool Rest you get an extended support surface from the Universal Support. It is ideal for sharpening turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. You can also use it for cabinet scrapers and hollowing tools.
It has a generous surface, 90 × 110mm, which permits a safe and steady positioning of the tool towards the stone.
The...
Tormek Anti-Corrosion Concentrate (2 Pack)
The Tormek Anti-Corrosion Concentrate makes water non-corrosive. Always use with Tormek diamond wheels. It can also be used with grindstones.
Add 10ml concentrate to 250ml water (~4%). Scale for correct dilution. Mix Anti-Corrosion Concentrate and water before adding to water trough. If you want to save the mix overnight, remember to lower the water trough. Does not contain anti-freeze.
Each...
Peacock Oil (Low Odour) - Regal Red - 250ml
Skelton Saws Peacock Oil is a wood finish made up of a mixture of traditional oils, resins and waxes, each adding its own special benefit. All ingredients are naturally obtained, mainly from ancient tree species and all have been time proven wood preservatives used by the Egyptians and Ancient Greeks. Both breathable and water-repellent, unlike current commercial finishes, Peacock Oil is built up from...
Saburrtooth 1/4'' Ball Nose - 1/4'' x 1 3/4''
Head Diameter: 1/4"
Head Length: 1¾"
Veritas Bar Gauge
Using a bar gauge lets you directly transfer and compare dimensions without conversion to numbers, reducing the chance of transcription errors. You can even use it to quickly test an assembly for squareness by checking that the diagonals are equal.
The base unit consists of two 6" steel rods fixed to aluminium clamp heads. The rods have threaded end holes that accept interchangeable brass...
Veritas Miniature Work Surface
The Veritas 11'' × 8'' miniature Worksurface is made from 18mm Baltic birch plywood and features an array of 17/64'' diameter dog holes, spaced 1 1/2'' apart.
It can be used in combination with the four miniature workbench accessories (Wonder Dog, hold-down, surface dogs and planing stops).
Four rubber feet help prevent the platform from shifting in use.
Made...
Workshop Brush
Sold as the Chiltern Bannister Brush, this soft hog hair brush removes even the finest of dust. It is perfect for dusting all manner of surfaces, from delicate objects to those awkward nooks & crannies. We've found it to be a really useful size for cleaning down your workbench. For the tidy people amongst us there is a beautifully proportioned dust pan available separately.
The handle is...
Woodcarvers Mallet 10oz - Hornbeam
A locally made woodcarver's mallet, all the way from deepest, darkest Norfolk.
Designed by professional woodcarver (Gerald Adams) and made by Colin Dalton. Mallets are notoriously difficult to choose but this design seems a good weight and fits comfortably in the hand.
Seasoned Hornbeam head with Ash handle.
2¾" (70mm) head
8" (200mm) high
10oz (300g)
Veritas Low-Angle Smoothing Plane + PM-V11 Blade
The Veritas low-angle smooth plane has three key uses. It is used to smooth large surfaces, preferably taking a diagonal cut, partly across and partly along the grain. Similarly, with its generous sides, it is ideal for shooting mitres. Finally, it is excellent for end-grain work. The low cutting angle of 37° minimizes fibre tearing. With a bed angle of 12°, this is a "bevel-up"...
Gransfors Bruk Hunter's Axe 418
The Gransfors Bruk Hunter's Axe is specially made for hunters. The Poll is forged thinner than normal and gently rounded and burnished to a Flay Poll to be used when skinning an animal. It is also good for chopping wood as well as meat and bones.
The grip of the handle has circular grooves which gives a steady grip even if your hands are wet or sticky. This axe has received, as the first and only...
Benchcrafted Tail Vice (Wagon Vice) Kit - Cast
Clamping work to a bench surface between dogs is a very old technique. The historical record gives us examples as far back as the Roman era, but most woodworkers know the tail vice from the modern Scandanavian and German tradition. The oldest detailed drawings we have are from the early 16th century by German author Martin Löffelholz.
The Benchcrafted Tail Vice uses a pair of either wooden or metal...
Blue Spruce Optima Fishtail Chisels - Curly Maple
Optima Fishtail Chisels handle the most critical paring cuts in tricky spots with extremely limited access. The prime example is half-blind dovetail sockets, but once you've added these exquisite chisels to your toolbox, you'll find dozens of other places where they're just the right tool for the job. The 5:1 taper ratio provides clear access to the most common hand-cut dovetail angles.
All...
Working with Living Willow
By Jon Warnes,
This booklet giving basic information on how to make living willow structures for gardens and public places.
Tormek DC-250 Diamond Wheel Coarse 360G
The Tormek Diamond Wheel Coarse has a grit size of 360 for fast steel removal when shaping and a rapid repair of a dull or damaged edge.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-8, Tormek T-7 and previous models with a 250mm stone diameter.
Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate. Always use the concentrate...
Tormek Stone Grader
With the Tormek Stone Grader SP-650 you can change the grit size of the Tormek original grindstone to give a finer sharpening surface. The other side of the Stone grader is used to maintain the grindstone, bringing new abrasive grains to the surface for an effective sharpening.
The Tormek Original Grindstone is designed so that it can be treated with the Stone Grader to change its quality from fast...
Auriou 'Mellow Hog' Rasp
The Mellow Hog Rasp - Half round 12" (300mm) G6
A Mellow Hog is a calmer version of its aggressive brother The Hog. The difference between the cut of the 2 rasps can be seen in the photos.
The original Hog has the coarsest cut for hand rasps made by Forge de Saint Juery at cut 3 (cut = stitch).
The Hog is a great tool for reducing roughed out blanks for cabriole legs and guitar necks...
Brusso Brass Hook MC-437
The Brusso MC-437 brass hook, with a flattened dome face ringed by a band-shaped edge, is pressure-fit and glued into place.
It measures 3/8" in diameter and projects 15/16". The mounting dowel is 3/16" in diameter.
Brusso Brass Recessed Pull CP-125
The Brusso CP-125 brass minimalist recessed pull is designed for cabinets and fine furniture. It may be either surface or flush mounted. The pull measures 1¼" in diameter.
Diameter: 1.250" - 1¼" - 32mm
Depth: 0.500" - ½" - 13mm
Clifton No.7 Jointer Plane
A Clifton No.7 Jointer Plane.
This jointer is the longest plane Clifton produce at 22" (55cm) long.
Ideal for edge jointing and flattening larger areas before using a smoother.
The late, great Alan Peters used his No.7 for pretty much everything, and today we still come across ex-students which still favour their jointer over any other plane.
Bedrock design frog allows for maximum...
Long Rods for Veritas Skew Rabbet
Double guide rods and a special collet locking system prevent the fence from racking, and the large brass knobs allow fast and easy adjustments without tools. The fence can be positioned to allow a maximum rabbet width of 1½".
Prices include VAT
Pfeil Curved Adze
The Pfeil Curved Adze, forged from quality steel, is available in Standard and Small:
Standard: Length 460mm (18”), cutting edge 95mm (3¾"), weight 1100g.
Small: Length 280mm (11”), cutting edge 50mm (2”), weight 600g.
Please be aware that these do not come pre-sharpened.
The Decorating Elf
The Decorating Elf is the most versatile texturing tool available and so simple to use.
Designed by William Hudson (USA), known to his friends as the "Turning Elf". Ideal for decorating pens, boxes, finials, bowls, jewellery, Christmas decorations, toys, key rings, pepper & salt mills and lots, lots more.
Cuts wood - side and end grain, acrylics, alternative ivory, bone and antler.
Use...
Thomas Flinn Pax Fine Curved Inlay Saw 15tpi
The Pax Fine Inlay Saw is made for similar purposes to the Veneer Saw although this saw has 15tpi with a super thin curved blade specially crafted for the finest veneer work.
The saw has a brightly polished brass back and Walnut handle. Blade length 3". Individually blister packed.
Lie-Nielsen Countersink with Cherry Handle
Cherry handle with solid brass ferrule.
3 flute, 82° countersink.
Please note that wood handles have natural figure and colour variations in the wood grain and may not match the photo.
Pfeil Medium Sized Tools - Series 2
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Auriou Riffler Rasp - Rat Tail / Oval
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
Connells Small Chisel Guard Set 1
Set contains the following leather chisel guards: 2 x 2", 2 x 1¼", 2 x 1", 2 x ¾", 6 x ½''
Hock Wooden Spokeshave Blades
These are the two-threaded-post style carbon steel blades and yes, the brass thumbnuts are included.
The small blade has a 11/2" cutting edge and is 2 1/2" by 7/16" overall.
The larger blade has a 2 3/4" cutting edge and is 4 7/16" x 5/8" overall.
Milk Pear
Deep reddish brown with fine, tight grain lines which vary from dark brown to reddish and straw colour. The timber is hard and tight.
Veritas 3/4'' Surface Clamp
Hold down, bench clamp or surface clamp - the functions are the same just the name changes. True to form Veritas have taken an ordinary thing and made it much, much better - as well as a thing of beauty in brass and black satin.
These fast acting surface clamps can be used anywhere you can drill a 19mm diameter hole. The post has a wedging mechanism which anchors it firmly (horizontally or vertically)...
Accordion Bottles Set
Two 1oz (30ml) bottles and eight blunt needles, two each of gauges 14, 18, 20, and 22. Used for gluing in the same way as syringes.
Made in USA.
Toothed Blade for Lie-Nielsen No. 62 Low Angle Jack Plane
Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane.
Toothed blades have small chisel-like teeth .030" (.762mm) wide, and spaced .030" apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
The blade comes with a 25° flat ground bevel; it sits in the tool at 12°, making the included cutting angle 37°.
The blade comes...
Veritas Dowel Formers - Metric
This Veritas dowel former allows you to make dowel pins of whatever length you need. You simply drive an oversized piece of wood through the sharp edged hole of the solid A2 tool steel insert to shear excess material from the dowel. The Veritas 75mm diameter mounting plate has two screw holes for permanent mounting.
Can be used over a 3/4" or 20mm dog hole and is compatible with all inserts. Solid...
Pfeil Chip Carving Knife - Kerb 11
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 11 also known as Detailschnitzmesser.
Use this knife to carve details, not specifically on chip carvings but for small objects or figures. The knife is used to create characters, using it for the details on faces for example or for small modifications.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade...
.png "Last Ones!")
Quercus Magazine - March/April 2022
QM11 March/April 2022
The Quercus March/April 2022 issue (QM11) pays homage to the famous chairmaker, and the magazine’s co-founder, John Brown, with tributes from well-known woodworkers worldwide, including Christopher Schwarz, Chris Williams, Drew Langsner and Kenneth Kortemeier, and the lessons they learned from John. In the second instalment of our exclusive interview, Paul Sellers shares...
Veritas Power Tenon Cutter Sharpening Kit
Each Veritas Power Tenon Cutter sharpening kit consists of:
1½" x 1½" Sanding Drum.
Pack of 3 x 80 grit Silicon Carbide Sleeves
Pack of 3 x 120 grit Silicon Carbide Sleeves
Gransfors Bruk Leather Sheath
Protect your Gransfors Bruk axe with these high-quality replacement leather sheaths. Crafted from vegetable-tanned leather, these sheaths offer an eco-friendly alternative to other tanned leathers. Designed to fit a range of Gransfors Bruk axes, including the Small Hatchet, Wildlife Hatchet, Hunter's Axe, Small Forest Axe, and many more, these sheaths ensure your tool remains secure and well-protected.
Made...
Lee Valley Drilling Jig with Metric Bushings
This Lee Valley product is based on a suggestion from cabinetmaker Stephen Shepherd for a jig that could drill chair spindles, this centreing jig has a large bearing surface for accuracy, with sighting marks for easy visual alignment. Used for end drilling round stock 5/16" to 1 1/2" in diameter, it also permits drilling of spheres and has a V notch for drilling into the side of a cylinder...
Record 044 Plough Plane Replacement Irons RI012
Set of eight cutters (1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 9/16") for Record 044 Plough Plane.
The Warrington Chest
This amazing chest was made by a Sheffield pattern maker, Ernest Warrington, when he was just 18 years old. The book traces Ernest’s family history, explains the trade of pattern making and its context in Sheffield, and tells the story of how the chest passed down the family.
The chest still contains a good proportion of the kit of tools used by its pattern maker owners and these tools are...
Make a Folding Spoon
By Jane Mickelborough
Make a Folding Spoon is a comprehensive 'how to' guide on carving your own wooden, folding, spoon. It includes plans to help you develop and design your own style as well as old spoons that you can learn from. Written and illustrated by Jane in a unique, comic book style.
"I am so pleased to introduce you to this wonderful book Make A Folding Spoon by Jane Mickleborough......
 1.png "20% off")
Henry Taylor No.3 Allongee Gouges
20% discount from price shown. Whilst stocks last!
Robert Sorby Gilt Edge Chisels - Rosewood 1/4'' (6mm)
Gilt Edge chisel with rosewood carver handle. Fitted with a tapered brass ferrule for comfort and elegance.
These are being discontinued due to the difficulties of obtaining the rosewood.
Tormek Multi Jig
It is not without reason this Tormek jig is named "Multi Jig". It consists of a housing and two interchangeable seats for different types of tools, the open seat and the closed seat, which really makes it two jigs in one.
With SVS-50 you can sharpen square and skew turning chisels with straight or curved edges as well as parting tools, roughing gouges and gouges and chisels for woodcarving.