Sort By
Per Page
View
Grid
List
Gransfors Bruk Froe 12'' Edge 487
Gransfors Bruk froes are the tool used to split shingles, shakes and lumber. You strike with a wooden maul or mallet, pounding the blade into the end of short logs, then quickly pulled back or pushed with the handle to split the wood.
It has a 12'' iron blade with an 18'' hickory handle and weighs 4lbs.
This tool is provided with a grain-leather sheath and a hickory handle.
...
Hock Marking Knife Blades
This right or left hand, spear point marking knives (bevels are on one side only) are perfect for scribing fine lines against a straight edge.
High carbon steel. All steel knife.
Spare Blade for Lie-Nielsen No. 62 Low Angle Jack Plane
Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane.
The blade comes with a 25° flat ground bevel; it sits in the tool at 12°, making the included cutting angle 37°.
The blade comes ready to use, but honing a secondary bevel of 5° or 10° will increase performance, help achieve a razor edge quickly, and improve edge life in hardwoods.
* 2" wide x .175" thick
* A2 cryogenically...
Gransfors Bruk Large Splitting Axe 442 - Standard 27'' Handle
Designed for splitting chunks of wood, 'rounds'. The axe head is quite heavy with forged cheeks on both sides of the blade, 'splitting wedge shaped crests' which power apart the grain of the wood. A Splitting Axe does not just have to slice into the wood - the thick axe blade pushes the wood apart.
The poll of this axe, like the poll on most axes, is definitely not designed for heavy...
Lie-Nielsen Chisel Handles
Lie-Nielsen chisel handles are made from made from Hard Maple and can be used with any of the Lie-Nielsen chisels.
The standard handle is recommended for all but the largest chisels.
Long chisel handles are 4" longer than the standard handles. Excellent for paring.
The Mortise chisel handles are slightly larger in diameter and length than the standard chisel handle, the Mortise Chisel...
Veritas Beading Blades for Combination & Small Plough Planes
All blades are made from PM-V11® tool steel. Blades are made in Canada. These blades are suitable for both the Veritas Small Plough Plane and Veritas Combination Plane.
These blades let you use the small plow plane to create decorative beading on workpieces. The blades are available in 1/8", 3/16" and 1/4" bead diameters. A 1/16" groove is cut on either side of the bead.
Brusso Brass Ball Catch BC-263
The Brusso BC-263 morticed ball catch, consisting of a brass cylinder with spring-loaded steel ball and a brass keeper, is used to secure cabinet doors. The grooved sides of each half, measuring 1/4" in diameter, provide grip when mounted and a reservoir for glue.
Diameter: 0.250" - 1/4" - 6mm
Brusso Brass Centre Pivot Hinge ST-80
The Brusso ST-80 brass centre pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 2" x 1/2" x 3/16".
Length: 2.000" - 2" - 51mm
Width: 0.500" - 1/2" - 13mm
Leaf Thickness: 0.188" - 3/16"...
Compound Curve Spoon Knife (Right Handed)
A high quality spoon knife from Wood Tools designed for use with a combined 30 years of spoon carving experience.
The knives are made from an excellent high alloy steel, very hard and tough so they hold an edge for a long time. They come razor sharp and ready to use. The handles are beech and around 7.5″ long, allowing for a great range of grips to be used efficiently.
This compound curve...
Gransfors Bruk American Felling Axe 434
The Gransfors American Felling Axe is a professional axe for those who want to work in the forest in the traditional way. The axe is ideal for felling very large trees, thanks to its long, broad edge of 11.5cm.
The axe is forged to a curved bit, making it suitable for cutting into fresh, resinous wood such as spruce or pine. The heavy head and long handle also give considerable power to the cut....
Mortise & Tenon Magazine - Issue 19
Table of Contents:
Lara Reisigl Domeneghetti – “A Visual Language: The Tylldal Chair’s Ongoing Journey”
“Cheating Entropy: An Interview with Antiquarian Chris Havey”
Douglas Brooks – “KIOKE: A New Way of Tradition”
Joshua A. Klein – “Build Your Library: Making a Stepback Bookcase”
Gerald W. R. Ward – “Encounters...
Blue Spruce Round Mallet
Blue Spruce Round Mallets feature a maple head infused with a tough polymer resin that increases the density of the maple by 80%. The infused head puts more “smack” into less space than simple wooden headed mallets. In addition to concentrating power, the resin protects the wood fibers from compression. This beautiful tool will still look beautiful after chopping hundreds of dovetails and...
Kutzall 1/8'' Sphere Burr - 3/8''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Hardback Book - First Three Issues
A hardbound republication of the Issues 1-3 with additional essays from M&T editors Michael Updegraff, Jim McConnell, and Joshua A. Klein.
Foreword by Christopher Schwarz of Lost Art Press.
+450 pages, matte-coated paper, sewn binding. Printed in the USA.
TABLES OF CONTENTS
Issue One
"The Mortise & Tenon Magazine Manifesto" - Joshua A. Klein
"Imbued With Story:...
Hock Block Plane Blades
Classic Hand Tools offer four block plane blades all of which are 3/32" thick x 4 1/4" long. They will fit Stanley, Record and many other block planes.
Which HOCK blade do I need for my Block Plane?
We offer four different block plane blades in two different alloys.
The first determinant is the blade width, either 1 3/8" or 1 5/8". Check what width of blade you need as...
Crucible Brass Bevel Monkey
The Crucible Brass Bevel Monkey is an accurate way to set your sliding bevel to fractions of a degree with little trouble. The Brass Bevel Monkey is marked with degrees from 0° (vertical) to 50° off of vertical. There are half-degree markings between each major marking, making it easy to extrapolate to a quarter of a degree or less.
The brass plate is engraved at Machine Time, which manufactures...
Tormek T-8 Sharpening System
Turn Your Sharpening Game Around - The Tormek T-8 sharpening machine maximises the precision with its revolutionary fully cast housing. This new design, together with a number of elaborated details, gives you the best conditions possible for a successful sharpening with top results.
The advanced design ensures an unbeatable precision for the Universal Support, which is the foundation of the Tormek...
Veritas Shooting Board Track
These are straight, durable aluminium tracks for making your own shooting board. They are designed to fit the Veritas Shooting Plane, and any other plane with a running surface between 2-1/32" and 2-1/4" wide; you can adjust the stainless-steel outer rail for a perfect fit. Set screws keep the rail from shifting in use.
The inner rail is 11/64" tall. Low-friction UHMW strips in the...
Henry Taylor Long Thin Bevel Edge Paring Chisels
These Henry Taylor long thin bevel edge paring chisels have relatively thin blades that taper towards the cutting edge.
Blade about 8¾" long.
Peacock Oil (Low Odour) - Clear Honey - 100ml
Skelton Saws Peacock Oil is a wood finish made up of a mixture of traditional oils, resins and waxes, each adding its own special benefit. All ingredients are naturally obtained, mainly from ancient tree species and all have been time proven wood preservatives used by the Egyptians and Ancient Greeks. Both breathable and water-repellent, unlike current commercial finishes, Peacock Oil is built up from...
Pentel Graphgear 1000 Automatic Pencil 0.7mm
We were first put onto these little beauties by Jaap Bosma (the taller half of Mappa Tools). Jaap was taking all the credit for uncovering the mechanical pencil, until we stumbled upon a blog from Christopher Schwarz and that they'd been on the market for almost a couple of decades! Anyway, a few years later and the dynamic buying department of CHT sprung into action and finally started to stock...
Pfeil Large Fishtail Sculpture Tools
Pfeil Large Fishtail Sculpture Tools are used for working on large pieces, with a Hornbeam handle, ergonomic design and heavy duty ferrules.
Please note: The Series 1 Fishtail Sculpture Tools are single bevel.
Robert Sorby Sandmaster 2'' Sanding Discs
Robert Sorby Sandmaster 2" velcro sanding discs.
Aluminium Oxide. Supplied in packs of 10
Lie-Nielsen Chipbreakers
Fits Lie-Nielsen No. 3 Bench Planes.
Lie-Nielsen chipbreakers are made of High Carbon Tool Steel and are 1/8" thick with a .015" lip ground at a 2 degree angle to provide excellent contact between the leading edge of the chipbreaker and the blade. Very solid. Supplied with the chipbreaker screw.
* 1-3/4" wide
Lie-Nielsen chipbreakers are designed specifically for their tools. It is possible...
Pfeil Back Bent Gouges Series 25
Pfeil Back Bent Gouges are for carving convex surfaces that are hard to reach, and for clean finish cuts.
The tools range from Least Convex to Most Convex: 10 - 20 - 30 - 25 - 28.
Please note that series 25 and 28 are more convex than 30.
Veritas Miniature Low Angle Block Plane
This version of the Veritas low-angle block plane is about a third the size of the original. At just under 2½" long and ¾" wide, it is a useful size for small-scale work or where a larger plane would be difficult to use. The low 12° bed angle combined with the 25° blade bevel gives it a cutting angle of 37°, making it also suitable for end-grain use.
The stainless-steel Norris-style adjuster...
Greenwood Spoon Carving
By: Emmet Van Driesche
Carving a spoon from a piece of freshly harvested wood is a rewarding – and challenging – pastime. Tremendous knowledge about the properties of wood, and grain, and the use of sharp edge tools can be gleaned through this seemingly simple practice. There is more to it than meets the eye.
But many would-be spoon carvers don’t know where to begin. What...
Saburrtooth 1/8'' Cylinder - 1/4'' x 1/2''
Saburrtooth 1/8" Cylinder available in fine, coarse and ex coarse - new image to follow.
Head Diameter: 1/4"
Head Length: 1/2"
Veritas Rip Cut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed for rip cutting at 12tpi. The teeth have a rake angle of 10°, an included angle of 60° for fast and accurate cutting along the line of the grain. The depth of cut is 60mm.
The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece...
Veritas DX60 Block Plane + PM-V11 Blade
This Veritas DX60 block plane is one of the finest planes that Veritas have ever made. 4 years of design work culminates in a superb plane made to exacting standards and featuring newly refined stainless-steel hardware.
The knob and wheel have elegant elliptical knurled edges for a firm grip. The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an...
MoraKniv 220 Push Knife
Whilst this looks like a traditional drawknife, this is actually sold as a wood splitting knife. The idea being that you take your larger chunks of wood and split them into smaller pieces of kindling that are easier to light.
It is double bevelled (has a bevel either side like a kitchen knife), whereas drawknives are single bevelled. However you can still use this for other purposes than just splitting...
Pfeil Series 16 - 35° V Parting Tools
For carving lettering and ornamentation and for sculpting figures.
35°
DMT Diamond Wave
DMT has developed the first diamond sharpener to combine convex and concave abrasive surfaces. The uniquely designed Diamond Wave affords longer sharpening strokes over traditional slip stones providing 0.0625' radii tapering to 1.000' radii accommodating all curved gouges. One tool can properly maintain a wide range of curved surface tools like in-cannel and out-cannel gouges, carving tools and wood...
Lie-Nielsen Cross Peen Hammer
This small hammer is not only great for tacks and brads, but also for making fine blade adjustments on your planes.
Brass Head, 4 oz (115 grams).
Cherry handle
Overall size is 12'' (300mm) long and 4'' (100mm) wide
Lie-Nielsen Fishtail Chisel
Fishtail Chisels are perfect for reaching the back corners of half-blind dovetails and paring other hard-to-reach areas. Their unique shape offers versatility for right and left hand recesses.
Made from A2 Tool Steel, hardened to RC 60-62. Hard Maple handles. Overall length is approximately 8".
The bevel comes ground sharp at 25º, but a higher secondary bevel is advisable, depending...
Pentel Ain Stein - 0.7mm tube of 40 HB leads
About 10% stronger than any other Pentel refill lead thanks to a ceramic cell structure
Supplied in easy to dispense, swivel-top tubes
Smoother than other refill leads on the market
Suitable for all 0.7mm mechanical pencils
40 leads per tube
Made from 92% recycled material
Pfeil Butt Chisels
Pfeil Butt Chisels allow the maximum cutting control by allowing you to get very close to your piece of work. Ideal for cleaning up and fitting joints, modelling or working in a restricted space.
Octagonal handle with oval section, robust Acacia wood.
Razor-sharp finely honed blade, HRC 60.
Blade length 87mm and overall length 155mm
Pfeil Butt Chisels are available in 6mm (¼"),...
Lee Valley Scratch Awl
Most scratch awls have a round handle, which makes it easy for them to roll off a bench. We designed this one with a 3" long hardwood handle with two flats to ensure it does not go anywhere when you lay it down.
The 5" long tapered blade is dressed to a fine point for precise marking and layout.
Hardened to Rc55, the high-carbon steel blade does not dull quickly.
Made in Canada.
Crucible Engraving Tool
The Crucible Engraving Tool is a simple, easy-to-use tool that allows you to slice straight and curved decorative lines on almost any wooden surface. The Engraving Tool was designed to create geometric patterns found on old Scandinavian and Eastern European furniture. But we found it also is excellent at carving modern geometric patterns.
The Engraving Tool consists of two pieces: a handle and a...
Hock Burnishers
Hock burnishers are hardened (Rc64) and polished high carbon tool-steel rods that stand up well to constant use on scraper edges. Most others are not hard enough for this demanding application.
Needs to be handled.
Size: 3/8" x 6
Flexcut Sloyd Knife KN50
The Flexcut Sloyd Knife comes razor sharp and ready for use. Much like traditionally designed Swedish tools, this carving knife is a durable, well made tool, ideal for spoon carving, whittling, marking, and general woodworking and handicrafts.
Its versatility allows you to use it for a wide range of wood carving projects from detail work to roughing. Use it to shave bark or use its fine tip for...
Kutzall 4 1/2'' Shaping Dish - Extreme
Made in the USA, the Kutzall Shaping Wheels provide a great combination of material removal and surface quality. Efficient with or against the grain, these wheels have a long wear life.
Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.
NOTE: These wheels should only be used on non-metallic materials.
The Shaping Wheels...
Peacock Oil (Low Odour) - Antique Amber - 100ml
Skelton Saws Peacock Oil is a wood finish made up of a mixture of traditional oils, resins and waxes, each adding its own special benefit. All ingredients are naturally obtained, mainly from ancient tree species and all have been time proven wood preservatives used by the Egyptians and Ancient Greeks. Both breathable and water-repellent, unlike current commercial finishes, Peacock Oil is built up from...
Peacock Oil (Low Odour) - Clear Honey - 250ml
Skelton Saws Peacock Oil is a wood finish made up of a mixture of traditional oils, resins and waxes, each adding its own special benefit. All ingredients are naturally obtained, mainly from ancient tree species and all have been time proven wood preservatives used by the Egyptians and Ancient Greeks. Both breathable and water-repellent, unlike current commercial finishes, Peacock Oil is built up from...
Pegas Double Tooth Reverse Blades
Pegas DoubleTooth Reverse Skip Scroll Saw Blades have the same basic tooth geometry as skip blades except that a limited number of reverse teeth have been added to the bottom of the blade. Reverse teeth prevent splinters from developing on the underside of the work piece because the top teeth do not cut entirely through the work. Thickness of work range 1/4" to 2". Blades perform well with...
Starrett Automatic Centre Punch
This all-steel Starrett automatic punch has a mechanism that automatically strikes a blow when downward pressure is applied. This punch can be used in many materials, including wood and you can adjust the force of the blow by turning the knurled cap. Once set to the desired force, the force will remain constant so the marks will be the same depth/size.
The point can also be removed should it ever...
Saburrtooth 1/4'' Sphere 1'' x 1''
Available in X fine, fine, coarse, X coarse, XX coarse and XXX coarse.
Head Diameter: 1"
Head Length: 1"
If grits are not displayed they are no longer available.
Veritas Mitre Saddle
When working on small items such as picture frames, a large combination square or try square can often be cumbersome. Not so with the new Veritas mitre saddle. The relatively small size makes it easy to use.
Despite its small size, it still has a large reference face (3-1/2" at the wide end) set at 45°. The leg measures 1" wide by 2-1/4" long. As with the saddle squares, the sides are machined...