Category
Brand
Collection
Price
Additional Filters
478 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Lie-Nielsen Toolworks No.10 ¼ Rebate Plane [Pre-owned]Lie-Nielsen Toolworks No.10 ¼ Rebate Plane [Pre-owned]
Lie-Nielsen Toolworks No.10 ¼ Rebate Plane [Pre-owned]
This plane has some minor pitting to the sole and sides. We can’t ''feel'' any depressions so these are minor pits and they are not widespread. We have taken several photographs to show where these pits and other discolouration/staining are present. Please feel free to enquire further sales@classichandtools.com This plane has a tilting rear tote so you can have knuckle clearance...
£365.00 (VAT exempt)
Lie-Nielsen Toolworks No.102 Low angle Block Plane [Pre-owned]Lie-Nielsen Toolworks No.102 Low angle Block Plane [Pre-owned]
Lie-Nielsen Toolworks No.102 Low angle Block Plane [Pre-owned]
This popular plane is a consistent good seller as woodworkers like the comfortable size and ease of use. Good iron. G++ condition. Classic Hand Tools offer this plane new for £169. Original box and leaflet. A commission sale.
£140.00 (VAT exempt)
Lie-Nielsen Toolworks No.7 Jointer Plane [Pre-owned]Lie-Nielsen Toolworks No.7 Jointer Plane [Pre-owned]
Lie-Nielsen Toolworks No.7 Jointer Plane [Pre-owned]
Pre-owned, imperfect due to use and some minor staining/discolouration. This is a very popular plane and one of Classic Hand Tools’ best sellers. This plane has had some minor moisture damage. We have cleaned the plane and believe it to be perfectly functional with a good blade. The tote and knob are almost as new. If you want pristine, then do not purchase this plane. If you want a good user,...
£450.00 (VAT exempt)
Lie-Nielsen Toolworks No.140 Skew Block Plane 2003 – Limited Edition [Pre-owned]Lie-Nielsen Toolworks No.140 Skew Block Plane 2003 – Limited Edition [Pre-owned]
Sold
Lie-Nielsen Toolworks No.140 Skew Block Plane 2003 – Limited Edition [Pre-owned]
This was a special limited-edition plane: 500 of these planes were made available at the time. The skew block plane features a white bronze cap iron, and a rosewood front knob. Each plane was engraved with its limited-edition number. This plane is number 319 (of 500). The plane has been used but is in G+ - G++ condition. We have gently cleaned this plane and it now presents well. Note the condition...
£535.00 (VAT exempt)
Lie-Nielsen Toolworks No.212 Bronze Scraper Plane [Pre-owned]Lie-Nielsen Toolworks No.212 Bronze Scraper Plane [Pre-owned]
Lie-Nielsen Toolworks No.212 Bronze Scraper Plane [Pre-owned]
Used but in very good condition. This plane is not currently offered in bronze by Lie-Nielsen, so it is uncommon to find for sale. Original Box. A commission sale.
£325.00 (VAT exempt)
Clifton 500 Convex Spokeshave [Pre-owned]Clifton 500 Convex Spokeshave [Pre-owned]
Clifton 500 Convex Spokeshave [Pre-owned]
Boxed in good condition. G ++ This is popular with chairmakers for hollowing out seats etc. Available brand new for around £130 Little used with minor tarnishing to handles. Full blade. A commission sale.
£95.00 (VAT exempt)
Blue Spruce Toolworks – Set of 4 Dovetail chisels – curly maple handles [Pre-owned]Blue Spruce Toolworks – Set of 4 Dovetail chisels – curly maple handles [Pre-owned]
Sold
Blue Spruce Toolworks – Set of 4 Dovetail chisels – curly maple handles [Pre-owned]
4 chisels in their original box. 3 of the 4 are in unused condition (with wax covering to edges intact), the 4th has been used sparingly and has very minor staining to the edge. Resin infused attractive handles in curly maple. Brass ferrules (so these pre-date the Optima range made now by Woodpeckers who now own Blue Spruce Toolworks) A commission sale.
£325.00 (VAT exempt)
Lie-Nielsen No.7 Jointer Plane [Pre-owned]Lie-Nielsen No.7 Jointer Plane [Pre-owned]
Lie-Nielsen No.7 Jointer Plane [Pre-owned]
In Good+ condition (G+) this plane is one of the most popular planes we sell at Classic Hand Tools. The plane has been used and shows cosmetic signs of use. Good blade life remaining. Cherry front knob and tote in nice order. Lie Nielsen box. A commission sale.
£475.00 (VAT exempt)
Lie-Nielsen Dovetail Saw – 15ppi Rip Cut [Pre-owned]Lie-Nielsen Dovetail Saw – 15ppi Rip Cut [Pre-owned]
Sold
Lie-Nielsen Dovetail Saw – 15ppi Rip Cut [Pre-owned]
Little used dovetail saw with curly maple handle. Milled brass back, Swedish steel blade (9'' long – 225mm) and traditional brass split nut saw bolts. Excellent condition. G++ A commission sale.
£135.00 (VAT exempt)
Lie-Nielsen Independence Carcass Saw – 14ppi X-Cut [Pre-owned]Lie-Nielsen Independence Carcass Saw – 14ppi X-Cut [Pre-owned]
Sold
Lie-Nielsen Independence Carcass Saw – 14ppi X-Cut [Pre-owned]
Extremely well look after crosscut carcass saw with attractive curly maple handle. This saw is an exact copy of a British saw made in 1830 with a milled brass back, Swedish steel blade (11'' long – 275mm) and traditional brass split nut saw bolts. Original box and leaflet. G++ A commision sale.
£145.00 (VAT exempt)
Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]
Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]
We are sure we will see the return of this classic Lie-Nielsen plane in bronze in the not so distant future but at what price as the raw material costs soar ever higher? This plane is pre-owned but in excellent condition. The box is dated 2010. Nickered. G++ condition. The iron bodied version is currently availble for £440
£485.00 inc VAT
Lie-Nielsen - Low Angle Block Plane L-N 60 ½ - O1 blade [Pre-owned]Lie-Nielsen - Low Angle Block Plane L-N 60 ½ - O1 blade [Pre-owned]
Lie-Nielsen - Low Angle Block Plane L-N 60 ½ - O1 blade [Pre-owned]
Dating from 2012 but very well looked after with 80-85% of the O1 blade remaining. Boxed. Wear marks consistent with use but in perfect working order.
£145.00 inc VAT
3/8'' Veritas Dowel & Tenon Cutter [Pre-owned]3/8'' Veritas Dowel & Tenon Cutter [Pre-owned]
3/8'' Veritas Dowel & Tenon Cutter [Pre-owned]
Fine condition used only once. Comes with the 3/8" Square Drive Adapter and 1/2" Square Socket. Original box and instructions. Obtaining dowels to perfectly match a project or specific species of timber, is to say the least, almost impossible. Not so if you own a Veritas Dowel cutter and have a few timber off-cuts to hand. These cutters can be used two ways. Either use them like a hand-held...
£45.00 (VAT exempt)
Veritas Tapered Tenon Cutter 5/8'' [Pre-owned]Veritas Tapered Tenon Cutter 5/8'' [Pre-owned]
Veritas Tapered Tenon Cutter 5/8'' [Pre-owned]
Unused and as new. Original box and instructions. This is the description from our Veritas section where the 2 other sizes are currently available: Veritas tapered tenon cutters will put tapered tenons on the tips of turnings, dowels, or rustic furniture components to fit into tapered holes, for example, legs and spindles on a Windsor chair. Use the cutter like a hand-held pencil sharpener; you...
£40.00 (VAT exempt)
2 Marples Bevel Edge Paring Chisels [Pre-owned]2 Marples Bevel Edge Paring Chisels [Pre-owned]
2 Marples Bevel Edge Paring Chisels [Pre-owned]
These are lovely! Slender boxwood handled paring chisels 3/8" and 1/4" wide.Very good condition G++. Restored, flattened and sharpened. A commission sale.
£50.00 (VAT exempt)
Set of 4 Pfeil Sculpture Carving Knives [Pre-owned, As New]Set of 4 Pfeil Sculpture Carving Knives [Pre-owned, As New]
Set of 4 Pfeil Sculpture Carving Knives [Pre-owned, As New]
A Set of 4 Swiss made carving tools in a canvas tool roll. Plum handles. Unused knives that have been sharpened. The Pfeil Sculpture Carving Knives are a set of 4 carving knives in a quality tool roll: Large Schaller knife Small Schaller knife Large Canard knife Small Canard knife A commission sale.
£105.00 (VAT exempt)
Crown Carbide Pro Hollowing Turning Tool [Pre-owned]Crown Carbide Pro Hollowing Turning Tool [Pre-owned]
Crown Carbide Pro Hollowing Turning Tool [Pre-owned]
Sheffield maker Crown Tools’ Hollowing Tool which features a 15mm replaceable carbide cutter. 355mm handle. Hardly used and in fine condition. This is available from retailers for a little over £110 so grab a little bargain here. A commission sale.
£85.00 (VAT exempt)
Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned]Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned]
Special Offer
Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned]
Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane. Toothed blades have small chisel-like teeth .030'' (.762mm) wide and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set smoothing plane ideally purchased through Classic Hand Tools. The blade comes with a 25° flat ground bevel; it sits in the tool at...
£60.00 (VAT exempt)
Boxed Set of 6 Paring Chisels – Henry Taylor (Diamic) [Pre-owned]Boxed Set of 6 Paring Chisels – Henry Taylor (Diamic) [Pre-owned]
Boxed Set of 6 Paring Chisels – Henry Taylor (Diamic) [Pre-owned]
Made in Sheffield England these paring chisels are 12 1/2” – 15” long (315mm- 370mm) overall with a blade length of about & ½” (190mm). 1/4”, 1/2”, 3/4”, 1” & 1 1/4” wide Condition report – Good + This is a good, graduated set of Sheffield made paring chisels with the marks of use and age (maybe 20+ years old). They...
£155.00 inc VAT
Curved Boggs Spokeshave with leather case - Lie-Nielsen Toolworks [Pre-owned]Curved Boggs Spokeshave with leather case - Lie-Nielsen Toolworks [Pre-owned]
Revised
Curved Boggs Spokeshave with leather case - Lie-Nielsen Toolworks [Pre-owned]
Pre-owned but little used in Lie-Nielsen leather case. Note: the curve is extremely shallow. This Boggs Spokeshave is hefty and solid, weighing 12oz Designed for fine, precise shaping in all woods. Body is 10'' long with a 1'' wide sole The sole of the curved spokeshave has a gentle, 5'' radius for working inside curves 2'' wide x 1/8'' thick...
£195.00 inc VAT
Stonemasons Firesharp Chisels – 10 widths [Clearance]Stonemasons Firesharp Chisels – 10 widths [Clearance]
Stonemasons Firesharp Chisels – 10 widths [Clearance]
10 double-hooped strong-as-an-ox stone masonry chisels made in France by Forge de Saint Juery home of Auriou Tool Works. Widths: 10, 15, 25, 30, 35 ,40, 45, 50, 55 & 60mm. 270mm overall length. New old stock. These wooden handled chisels are ideal for softer stone including alabaster, limestone and soapstone. When they are gone, they are gone! 3 sets available – you...
£255.00 inc VAT
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
11 Toothed Chisels: 10mm wide 3 pointed teeth 15mm wide 4 pointed teeth 20mm wide 5 pointed teeth 25mm wide 6 pointed teeth 30mm wide 7 pointed teeth 35mm wide 8 pointed teeth 40mm wide 9 pointed teeth 45mm wide 10 pointed teeth 50mm wide - 11 pointed teeth 55mm wide - 11 pointed teeth 60mm wide - 13 pointed teeth 270mm overall length. New old stock. Be advised...
£335.00 inc VAT
Flexcut – 3 Special Edition Forged Carving Knives [Clearance]
Flexcut – 3 Special Edition Forged Carving Knives [Clearance]
Upsweep, Detail & Cutting Knives KN201, KN203 & KN204 New, old stock. With attractive bocote and leather insert handles these 3 knives were part of a small special edition from well-known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall. High carbon drop forged blade edges, the cutting and...
£72.00 inc VAT
Flexcut – 2 Special Edition Forged Upsweep & Cutting Knives KN203 & KN204 [Clearance]
Flexcut – 2 Special Edition Forged Upsweep & Cutting Knives KN203 & KN204 [Clearance]
Upsweep & Cutting Knives KN203 & KN204 New, old stock. With attractive bocote and leather insert handles these 2 knives were part of a small special edition from well-known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge each measuring approximately...
£50.00 inc VAT
Flexcut – Special Edition Forged Upsweep Knife KN203 [Clearance]
Flexcut – Special Edition Forged Upsweep Knife KN203 [Clearance]
New, old stock. With attractive bocote and leather insert handles this knife was part of a small special edition from well known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge measuring 35mm. The blade profile differs slightly from current Flexcut offerings...
£25.00 inc VAT
Flexcut – Special Edition Forged Cutting Knife KN204 [Clearance]
Flexcut – Special Edition Forged Cutting Knife KN204 [Clearance]
New, old stock. With attractive bocote and leather insert handles this knife was part of a small special edition from well known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge measuring 35mm. The blade profile differs slightly from current Flexcut offerings...
£25.00 inc VAT
7 Pneumatic Stone Carving Tools - Auriou [Clearance]7 Pneumatic Stone Carving Tools - Auriou [Clearance]
Last Ones!
7 Pneumatic Stone Carving Tools - Auriou [Clearance]
Yes! The blacksmiths at legendary French artisan tool makers AURIOU TOOLWORKS also used to make tools for stone sculptors who use air powered chisels for their work. A bit noisy for us (and them maybe because they have stopped making them!) We have 3 gouges: 10mm wide, 15mm wide and 20mm wide. Also 2 snakes tongue (pied a biche) tools - for heavy shaping work (10 & 15mm wide) And 2 point...
£100.00 inc VAT
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
Last Ones!
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
New This system (RSTM-SCT2) comes with the carbide detail point cutter plus the following High Speed Steel Cutters RSTM-TIP3 HSS Square Cutter RSTM-TIP4 HSS French Curve Cutter RSTM-TIP5 HSS Dovetail/Box Cutter RSTM-TIP6 HSS Teardrop Inside/Outside Cutter RSTM-TIP7 HSS Mushroom Cutter And as a Brucey Bonus RSTM-GT2 Excelsior Detail Point Cutter (titanium nitride)
£125.00 inc VAT
Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance]
Special Offer
Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance]
New This system (RSTM-SCT3) comes with the carbide square cutter plus the following titanium nitride cutters RSTM-GT2 Excelsior Detail Point Cutter RSTM-GT4 Excelsior French Curve Cutter RSTM-GT6 Excelsior Teardrop Inside/Outside Cutter RSTM-GT7 Excelsior Mushroom Cutter
£115.00 inc VAT
Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]
Last Ones!
Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]
These unused tools were discontinued from Flexcut USA’s portfolio of large tools several years ago. These are unused new, old stock tools in perfect condition. Flexcut designed these beefy tools to be stuck with a mallet when working on large sculptures. but of course, they can be used by hand to shape work without whacking with a mallet as required. The old Flexcut code is MC 302 which...
£15.00 inc VAT
Karl Holtey 2 1/8'' Plane Blade [Clearance]Karl Holtey 2 1/8'' Plane Blade [Clearance]
Special Offer
Karl Holtey 2 1/8'' Plane Blade [Clearance]
Unused old stock. Stamped HOLTEY. Also stamped “s”. 4” overall. 2 1/8” wide. 3/16” thick. 4 positioning holes.
£45.00 inc VAT
SEVEN Henry Taylor Straight Fishtail Gouges [Clearance]SEVEN Henry Taylor Straight Fishtail Gouges [Clearance]
Last Ones!
SEVEN Henry Taylor Straight Fishtail Gouges [Clearance]
New current stock. A fishtail bundle! Ok – so this is excess stock created through our enthusiasm to promote this great British brand a few years back. We still love these Henry Taylor carving tools but when HT slimmed down their overall offering, we were holding quite a lot (hundreds!) of carving tools. At that point we decided to concentrate our future investment in woodcarving hand tools...
£145.00 inc VAT
1/2'' Lock Mortise Chisel [Vintage]1/2'' Lock Mortise Chisel [Vintage]
Revised
1/2'' Lock Mortise Chisel [Vintage]
A nice, socketed lock 1/2" wide mortise chisel with oak handle. 21” overall. No markers mark. Very good condition.
£24.00 inc VAT
Brusso Stainless Steel Hinges – CB302S [Clearance]Brusso Stainless Steel Hinges – CB302S [Clearance]
Revised
Brusso Stainless Steel Hinges – CB302S [Clearance]
Brusso Hardware (USA) discontinued a lot of their range over the last few years. Most of their range of stainless hinges left their portfolio but we have a few pairs left (5 pairs) in stock. These are new. The Brusso CB-302 full mortice butt hinge, measures 1¼" x 13/16". Length: 1.250" - 1¼" - 32mm Width: 0.802" - 13/16" - 21mm Leaf Thickness: 0.086" - 5/64" - 2mm NOTE - All Brusso hinges...
£48.00 inc VAT
Brusso Stainless steel shelf support K-10S [Clearance]Brusso Stainless steel shelf support K-10S [Clearance]
Revised
Brusso Stainless steel shelf support K-10S [Clearance]
The K-10S stainless steel shelf support pin comprises a decorative turned support and a cylindrical peg. Stainless steel gives the pin a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The peg measures 1/4" in diameter x 3/8" deep, and the support projects 7/16". Supplied as a set of 4 – you are buying 2 sets (8 shelf support...
£54.00 inc VAT
Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]
Last Ones!
Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]
This is old stock from the early days of starting up Classic Hand Tools. Sanderson Hardware are still going in California. (Note - these cotter pins are different to what they offer now). The diameter of the ring pull is 3/4". The rod stock is 1/8" diameter and 2 1/4” ong . The square plate is ¾” x 5/8” with 4 screw holes (screws provided). The plate has...
£12.00 inc VAT
Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New, SOLD]Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New, SOLD]
Sold
Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New, SOLD]
Still in their original wrapping, this set comprises of 12 bevel edge chisels from the brand IYOROI in linen roll. 223mm in overall length. Red oak handles. Black finish to the blades with polished hollows. Black finish to striking hoops. Hollow ground backs with single flutes for all widths. Widths are as follows: 1.5, 3, 6, 9, 12,15,18, 21, 24, 30, 36 & 42mm. Denim tool...
£395.00 (VAT exempt)
2 pairs of Adjustable Hand Clamps by Dubuque, Ohio, USA. "Moose Brand" [Pre-owned, As New, SOLD]2 pairs of Adjustable Hand Clamps by Dubuque, Ohio, USA. "Moose Brand" [Pre-owned, As New, SOLD]
Sold
2 pairs of Adjustable Hand Clamps by Dubuque, Ohio, USA. "Moose Brand" [Pre-owned, As New, SOLD]
The jaws are made with fine quality American hard maple. The spindles and swivel nuts are of cold drawn carbon steel. The Dubuque hand screw clamp is a versatile chap. The first pair: Jaw length: 10'' (250mm). Clamp opening: 7'' (175mm). The second pair: Jaw length: 4'' (100mm). Clamp opening: 2¼'' (56mm). Unused and fine condition. A...
£55.00 (VAT exempt)
3 David Barron Guides [Pre-owned, As New, SOLD]3 David Barron Guides [Pre-owned, As New, SOLD]
Sold
3 David Barron Guides [Pre-owned, As New, SOLD]
These are the models that David originally had made before the pandemic, war in Ukraine and the lure of the golf course forced a stop before Veritas started making the guides once more. 1:6 Dovetail, 90 degree 45 degree As new condition except for minor scratches to original friction pads. Original boxes and instructions. 2 spare low friction pads for each guide. A commission sale.
£100.00 (VAT exempt)
Crown & Henry Taylor Spindle Gouges [Pre-owned, As New, SOLD]Crown & Henry Taylor Spindle Gouges [Pre-owned, As New, SOLD]
Sold
Crown & Henry Taylor Spindle Gouges [Pre-owned, As New, SOLD]
2 famous Sheffield makers! The Crown spindle gouge is one from their M42 cyro range. 10mm wide. It has been sharpened but is unused. The Henry Taylor Spindle Gouge is 6mm, sharpened but unused. A commission sale.
£55.00 (VAT exempt)
David Finck Plane Blade Kit & Book [Pre-owned, SOLD]David Finck Plane Blade Kit & Book [Pre-owned, SOLD]
Sold
David Finck Plane Blade Kit & Book [Pre-owned, SOLD]
David Finck 1.75'' x 3.5'' plane blade assembly (very similar to the Ron Hock - Krenov style combos). Plane blade engraved DF with cap iron. New. PLUS Making & Mastering Wood Planes by David Finck. Revised edition, originally published by Sterling in 2005. Mint copy. A commission sale.
£50.00 (VAT exempt)
Hamilton Toolworks - Panel Gauge/Pencil Gauge [Pre-owned, SOLD]Hamilton Toolworks - Panel Gauge/Pencil Gauge [Pre-owned, SOLD]
Sold
Hamilton Toolworks - Panel Gauge/Pencil Gauge [Pre-owned, SOLD]
Curly Maple. 28” long x 8" fence. Just a few minor cosmetic dings. This is a fabulous looking tool and well as being rated the best panel gauge out there. Made in the USA by Jim Hamilton. Here’s what Jim says about this gauge… “The Hamilton Panel Gauge is a meticulously crafted, precision woodworking tool, designed for accurate line marking on various materials....
£225.00 (VAT exempt)
Lie-Nielsen Leather Apron [Pre-owned, SOLD]Lie-Nielsen Leather Apron [Pre-owned, SOLD]
Sold
Lie-Nielsen Leather Apron [Pre-owned, SOLD]
Adjustable shoulder straps and ties. Heavy duty suede leather with inside pocket. Made in USA. A commission sale.
£100.00 (VAT exempt)
Veritas Carvers Drawknife (with PM V-11 blade) [Pre-owned, SOLD]Veritas Carvers Drawknife (with PM V-11 blade) [Pre-owned, SOLD]
Sold
Veritas Carvers Drawknife (with PM V-11 blade) [Pre-owned, SOLD]
An ordinary drawknife is too large for most carving - the Veritas drawknife is designed for ease of use with maximum control. The teardrop-shaped handles are cocked at 45° to the blade and nestle comfortably in your hands. The polished 4" x 1/8" x 3/4" blade is ground and honed to a perfect edge and is supplied with a blade guard. The drawknife blade is custom made for Veritas...
£85.00 (VAT exempt)
Veritas Carving Vice with Doghole Mount Assembly and Carver's Screw [Pre-owned, As New, SOLD]
Sold
Veritas Carving Vice with Doghole Mount Assembly and Carver's Screw [Pre-owned, As New, SOLD]
Veritas’ popular vice with the Doghole Mount Assembly and Carver's Screw. A good carver's vice should be adjustable in all three axes. This one has full rotation in two axes and 3" of height adjustment in the third axis. But more important, it has controlled release; when you relieve the clamping pressure, a combination of internal springs and O-rings provides residual resistance...
£135.00 (VAT exempt)
2 Beall Tool Co. Wood Threader Kits [Pre-owned, SOLD]
Sold
2 Beall Tool Co. Wood Threader Kits [Pre-owned, SOLD]
1" and 1 1/2". Each complete kit contains: Wood Threader Router Attachment, specially made Internal Threading Tap, complete hardware for attachments, carbide router bit and full instructions. Used very successfully but only once and as new. Note that the Beall Tool Co was sold to Lee Valley and these threader kits and spares are now sold by Classic Hand Tools. A commission sale.
£120.00 (VAT exempt)
3 Vintage Rabone Measuring Tools - Imperial [Preowned, SOLD]3 Vintage Rabone Measuring Tools - Imperial [Preowned, SOLD]
Sold
3 Vintage Rabone Measuring Tools - Imperial [Preowned, SOLD]
A 33 feet Rabone steel tape No.435 - brass winder. A 100 feet Rabone steel tape No.4351 - brass winder. A Rabone No.1377 Boxwood 2 foot 4 fold rule with brass tips and hinge. All are in crisp condition for their age.
£20.00 inc VAT
Clifton No.6 Jack (Fore) Plane [Pre-owned, SOLD]Clifton No.6 Jack (Fore) Plane [Pre-owned, SOLD]
Sold
Clifton No.6 Jack (Fore) Plane [Pre-owned, SOLD]
Pre-owned (circa 2010) but very well looked after. British racing green painted body which indicates pre-Thomas Flinn takeover of the Clifton name and manufacturing process. So, this plane has a hand forged 2 3/8” wide blade with 2-piece cap iron (makes sharpening the blade a bit quicker). This size plane is often overlooked as people opt for the longer No.7 Jointer or a shorter 5 1/2....
£275.00 inc VAT
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | Last