Category
Brand
Collection
Price
Additional Filters
467 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Hamilton Toolworks - Panel Gauge/Pencil Gauge [Pre-owned]Hamilton Toolworks - Panel Gauge/Pencil Gauge [Pre-owned]
Sold
Hamilton Toolworks - Panel Gauge/Pencil Gauge [Pre-owned]
Curly Maple. 28” long x 8" fence. Just a few minor cosmetic dings. This is a fabulous looking tool and well as being rated the best panel gauge out there. Made in the USA by Jim Hamilton. Here’s what Jim says about this gauge… “The Hamilton Panel Gauge is a meticulously crafted, precision woodworking tool, designed for accurate line marking on various materials....
£225.00 (VAT exempt)
Veritas Carving Vice with Doghole Mount Assembly and Carver's Screw [Pre-owned, As New]
Veritas Carving Vice with Doghole Mount Assembly and Carver's Screw [Pre-owned, As New]
Veritas’ popular vice with the Doghole Mount Assembly and Carver's Screw. A good carver's vice should be adjustable in all three axes. This one has full rotation in two axes and 3" of height adjustment in the third axis. But more important, it has controlled release; when you relieve the clamping pressure, a combination of internal springs and O-rings provides residual resistance...
£135.00 (VAT exempt)
3/8'' Veritas Dowel & Tenon Cutter [Pre-owned]3/8'' Veritas Dowel & Tenon Cutter [Pre-owned]
3/8'' Veritas Dowel & Tenon Cutter [Pre-owned]
Fine condition used only once. Comes with the 3/8" Square Drive Adapter and 1/2" Square Socket. Original box and instructions. Obtaining dowels to perfectly match a project or specific species of timber, is to say the least, almost impossible. Not so if you own a Veritas Dowel cutter and have a few timber off-cuts to hand. These cutters can be used two ways. Either use them like a hand-held...
£45.00 (VAT exempt)
Veritas Tapered Tenon Cutter 5/8'' [Pre-owned]Veritas Tapered Tenon Cutter 5/8'' [Pre-owned]
Veritas Tapered Tenon Cutter 5/8'' [Pre-owned]
Unused and as new. Original box and instructions. This is the description from our Veritas section where the 2 other sizes are currently available: Veritas tapered tenon cutters will put tapered tenons on the tips of turnings, dowels, or rustic furniture components to fit into tapered holes, for example, legs and spindles on a Windsor chair. Use the cutter like a hand-held pencil sharpener; you...
£40.00 (VAT exempt)
3 David Barron Guides [Pre-owned, As New]3 David Barron Guides [Pre-owned, As New]
Sold
3 David Barron Guides [Pre-owned, As New]
These are the models that David originally had made before the pandemic, war in Ukraine and the lure of the golf course forced a stop before Veritas started making the guides once more. 1:6 Dovetail, 90 degree 45 degree As new condition except for minor scratches to original friction pads. Original boxes and instructions. 2 spare low friction pads for each guide. A commission sale.
£100.00 (VAT exempt)
2 Marples Bevel Edge Paring Chisels [Pre-owned]2 Marples Bevel Edge Paring Chisels [Pre-owned]
2 Marples Bevel Edge Paring Chisels [Pre-owned]
These are lovely! Slender boxwood handled paring chisels 3/8" and 1/4" wide.Very good condition G++. Restored, flattened and sharpened. A commission sale.
£50.00 (VAT exempt)
Set of 4 Pfeil Sculpture Carving Knives [Pre-owned, As New]Set of 4 Pfeil Sculpture Carving Knives [Pre-owned, As New]
Set of 4 Pfeil Sculpture Carving Knives [Pre-owned, As New]
A Set of 4 Swiss made carving tools in a canvas tool roll. Plum handles. Unused knives that have been sharpened. The Pfeil Sculpture Carving Knives are a set of 4 carving knives in a quality tool roll: Large Schaller knife Small Schaller knife Large Canard knife Small Canard knife A commission sale.
£105.00 (VAT exempt)
David Finck Plane Blade Kit & Book [Pre-owned]David Finck Plane Blade Kit & Book [Pre-owned]
David Finck Plane Blade Kit & Book [Pre-owned]
David Finck 1.75'' x 3.5'' plane blade assembly (very similar to the Ron Hock - Krenov style combos). Plane blade engraved DF with cap iron. New. PLUS Making & Mastering Wood Planes by David Finck. Revised edition, originally published by Sterling in 2005. Mint copy. A commission sale.
£50.00 (VAT exempt)
2 Beall Tool Co. Wood Threader Kits [Pre-owned]
2 Beall Tool Co. Wood Threader Kits [Pre-owned]
1" and 1 1/2". Each complete kit contains: Wood Threader Router Attachment, specially made Internal Threading Tap, complete hardware for attachments, carbide router bit and full instructions. Used very successfully but only once and as new. Note that the Beall Tool Co was sold to Lee Valley and these threader kits and spares are now sold by Classic Hand Tools. A commission sale.
£120.00 (VAT exempt)
Crown Carbide Pro Hollowing Turning Tool [Pre-owned]Crown Carbide Pro Hollowing Turning Tool [Pre-owned]
Crown Carbide Pro Hollowing Turning Tool [Pre-owned]
Sheffield maker Crown Tools’ Hollowing Tool which features a 15mm replaceable carbide cutter. 355mm handle. Hardly used and in fine condition. This is available from retailers for a little over £110 so grab a little bargain here. A commission sale.
£85.00 (VAT exempt)
Crown & Henry Taylor Spindle Gouges [Pre-owned, As New]Crown & Henry Taylor Spindle Gouges [Pre-owned, As New]
Crown & Henry Taylor Spindle Gouges [Pre-owned, As New]
2 famous Sheffield makers! The Crown spindle gouge is one from their M42 cyro range. 10mm wide. It has been sharpened but is unused. The Henry Taylor Spindle Gouge is 6mm, sharpened but unused. A commission sale.
£55.00 (VAT exempt)
2 pairs of Adjustable Hand Clamps by Dubuque, Ohio, USA. "Moose Brand" [Pre-owned, As New]2 pairs of Adjustable Hand Clamps by Dubuque, Ohio, USA. "Moose Brand" [Pre-owned, As New]
Sold
2 pairs of Adjustable Hand Clamps by Dubuque, Ohio, USA. "Moose Brand" [Pre-owned, As New]
The jaws are made with fine quality American hard maple. The spindles and swivel nuts are of cold drawn carbon steel. The Dubuque hand screw clamp is a versatile chap. The first pair: Jaw length: 10'' (250mm). Clamp opening: 7'' (175mm). The second pair: Jaw length: 4'' (100mm). Clamp opening: 2¼'' (56mm). Unused and fine condition. A...
£55.00 (VAT exempt)
Veritas Carvers Drawknife (with PM V-11 blade) [Pre-owned]Veritas Carvers Drawknife (with PM V-11 blade) [Pre-owned]
Veritas Carvers Drawknife (with PM V-11 blade) [Pre-owned]
An ordinary drawknife is too large for most carving - the Veritas drawknife is designed for ease of use with maximum control. The teardrop-shaped handles are cocked at 45° to the blade and nestle comfortably in your hands. The polished 4" x 1/8" x 3/4" blade is ground and honed to a perfect edge and is supplied with a blade guard. The drawknife blade is custom made for Veritas...
£85.00 (VAT exempt)
Lie-Nielsen Leather Apron [Pre-owned]Lie-Nielsen Leather Apron [Pre-owned]
Sold
Lie-Nielsen Leather Apron [Pre-owned]
Adjustable shoulder straps and ties. Heavy duty suede leather with inside pocket. Made in USA. A commission sale.
£100.00 (VAT exempt)
Boxed Set of 6 Paring Chisels – Henry Taylor (Diamic) [Pre-owned]Boxed Set of 6 Paring Chisels – Henry Taylor (Diamic) [Pre-owned]
Boxed Set of 6 Paring Chisels – Henry Taylor (Diamic) [Pre-owned]
Made in Sheffield England these paring chisels are 12 1/2” – 15” long (315mm- 370mm) overall with a blade length of about & ½” (190mm). 1/4”, 1/2”, 3/4”, 1” & 1 1/4” wide Condition report – Good + This is a good, graduated set of Sheffield made paring chisels with the marks of use and age (maybe 20+ years old). They...
£155.00 inc VAT
Woodpeckers – Model 641 Woodworking Square [Pre-owned]Woodpeckers – Model 641 Woodworking Square [Pre-owned]
Sold
Woodpeckers – Model 641 Woodworking Square [Pre-owned]
Woodpeckers - The new benchmark in precision measuring and layout tools. Easy to read 1mm laser etched increments on both sides of the blade. Thick shouldered handle so the square rests flat on the workpiece and stands upright. 0.001” tolerance (that is pretty tolerant!) Custom made holder to hang on your wall (mdf cutout housing). Original packaging. In good condition, with a...
£72.00 inc VAT
Pair of No.12 Hollow & Round by John Moseley & Son [Vintage]Pair of No.12 Hollow & Round by John Moseley & Son [Vintage]
Sold
Pair of No.12 Hollow & Round by John Moseley & Son [Vintage]
A nice pair! Hollows and rounds were made in matched pairs, thin ones marked No1 and widest ones generally stopped at No.18 (yes, we have seen a No.20 matched pair but that is rare) No.12's have cutters that are 3/4" wide. Wedges and irons in very good order. John Moseley was making planes in Broad Street from 1862-1894 (Source : Goodman, British Planemakers from 1700) There...
£25.00 inc VAT
Lie-Nielsen Toolworks Honing Guide with 3 pairs of jaws [Pre-owned]
Special Offer
Lie-Nielsen Toolworks Honing Guide with 3 pairs of jaws [Pre-owned]
This honing guide is pre-owned and currently has the long jaws fitted. Also included are the standard jaws and the mortise jaws. This description of the honing guide is from our Lie-Nielsen section of our website: "The Lie-Nielsen version of the side clamping style of honing guide is solidly machined from stainless steel, with a bronze bearing. The honing guide features removable jaws:...
£218.00 (VAT exempt)
Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned]Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned]
Special Offer
Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned]
Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane. Toothed blades have small chisel-like teeth .030'' (.762mm) wide and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set smoothing plane ideally purchased through Classic Hand Tools. The blade comes with a 25° flat ground bevel; it sits in the tool at...
£60.00 (VAT exempt)
Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]
Special Offer
Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]
Still in their original wrapping, this set comprises of 12 bevel edge chisels from the brand IYOROI in linen roll. 223mm in overall length. Red oak handles. Black finish to the blades with polished hollows. Black finish to striking hoops. Hollow ground backs with single flutes for all widths. Widths are as follows: 1.5, 3, 6, 9, 12,15,18, 21, 24, 30, 36 & 42mm. Denim tool...
£395.00 (VAT exempt)
Curved Boggs Spokeshave with leather case - Lie-Nielsen Toolworks [Pre-owned]Curved Boggs Spokeshave with leather case - Lie-Nielsen Toolworks [Pre-owned]
Revised
Curved Boggs Spokeshave with leather case - Lie-Nielsen Toolworks [Pre-owned]
Pre-owned but little used in Lie-Nielsen leather case. Note: the curve is extremely shallow. This Boggs Spokeshave is hefty and solid, weighing 12oz Designed for fine, precise shaping in all woods. Body is 10'' long with a 1'' wide sole The sole of the curved spokeshave has a gentle, 5'' radius for working inside curves 2'' wide x 1/8'' thick...
£200.00 inc VAT
Gramercy Dovetail Saw [Pre-owned]Gramercy Dovetail Saw [Pre-owned]
Revised
Gramercy Dovetail Saw [Pre-owned]
9'' long rip cut, 19 ppi, dovetail saw which tapers from the toe for ease of use. American black walnut handle which affords a 3-finger grip, this is a lightweight saw that feels very comfortable in the hand. The saw plate is 0.018'' thick allowing for a narrow kerf. Hand filed with minimum set (approx. 0.003'') Brass backed. Made in the USA. This is pre-owned and...
£215.00 inc VAT
HSS 3-wing Deburring Tool and Handled Burnishing Rod - Clifton, Sheffield [Preowned]HSS 3-wing Deburring Tool and Handled Burnishing Rod - Clifton, Sheffield [Preowned]
Revised
HSS 3-wing Deburring Tool and Handled Burnishing Rod - Clifton, Sheffield [Preowned]
Clifton haven’t made the high-speed steel deburring tool since being taken over by Thomas Flinn so this handsome tool is a little bit of a rarity. The burnishing tool is still offered today. Rosewood handles with brass ferules/collars (to protect your knuckles). Pre-owned but little used.
£66.00 inc VAT
Stanley 271 - Small Router Plane [Preowned]Stanley 271 - Small Router Plane [Preowned]
Revised
Stanley 271 - Small Router Plane [Preowned]
A little used Stanley 271 small router plane Marked 'STANLEY No.271 MADE IN ENG' on the body of the plane. 1/4'' cutter which can be mounted for use as either an open or closed throat router. 3'' x 2'' overall. In original orange box with instruction leaflet.
£38.00 inc VAT
Stonemasons Firesharp Chisels – 10 widths [Clearance]Stonemasons Firesharp Chisels – 10 widths [Clearance]
Stonemasons Firesharp Chisels – 10 widths [Clearance]
10 double-hooped strong-as-an-ox stone masonry chisels made in France by Forge de Saint Juery home of Auriou Tool Works. Widths: 10, 15, 25, 30, 35 ,40, 45, 50, 55 & 60mm. 270mm overall length. New old stock. These wooden handled chisels are ideal for softer stone including alabaster, limestone and soapstone. When they are gone, they are gone! 3 sets available – you...
£255.00 inc VAT
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
11 Toothed Chisels: 10mm wide 3 pointed teeth 15mm wide 4 pointed teeth 20mm wide 5 pointed teeth 25mm wide 6 pointed teeth 30mm wide 7 pointed teeth 35mm wide 8 pointed teeth 40mm wide 9 pointed teeth 45mm wide 10 pointed teeth 50mm wide - 11 pointed teeth 55mm wide - 11 pointed teeth 60mm wide - 13 pointed teeth 270mm overall length. New old stock. Be advised...
£335.00 inc VAT
Flexcut – 3 Special Edition Forged Carving Knives [Clearance]
Flexcut – 3 Special Edition Forged Carving Knives [Clearance]
Upsweep, Detail & Cutting Knives KN201, KN203 & KN204 New, old stock. With attractive bocote and leather insert handles these 3 knives were part of a small special edition from well-known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall. High carbon drop forged blade edges, the cutting and...
£72.00 inc VAT
Flexcut – 2 Special Edition Forged Upsweep & Cutting Knives KN203 & KN204 [Clearance]
Flexcut – 2 Special Edition Forged Upsweep & Cutting Knives KN203 & KN204 [Clearance]
Upsweep & Cutting Knives KN203 & KN204 New, old stock. With attractive bocote and leather insert handles these 2 knives were part of a small special edition from well-known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge each measuring approximately...
£50.00 inc VAT
Flexcut – Special Edition Forged Upsweep Knife KN203 [Clearance]
Flexcut – Special Edition Forged Upsweep Knife KN203 [Clearance]
New, old stock. With attractive bocote and leather insert handles this knife was part of a small special edition from well known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge measuring 35mm. The blade profile differs slightly from current Flexcut offerings...
£25.00 inc VAT
Flexcut – Special Edition Forged Cutting Knife KN204 [Clearance]
Flexcut – Special Edition Forged Cutting Knife KN204 [Clearance]
New, old stock. With attractive bocote and leather insert handles this knife was part of a small special edition from well known carving tool maker Flexcut USA. They are not available now as the edition was limited and production stopped several years ago. 160mm overall with the high carbon drop forged blade edge measuring 35mm. The blade profile differs slightly from current Flexcut offerings...
£25.00 inc VAT
7 Pneumatic Stone Carving Tools - Auriou [Clearance]7 Pneumatic Stone Carving Tools - Auriou [Clearance]
Last Ones!
7 Pneumatic Stone Carving Tools - Auriou [Clearance]
Yes! The blacksmiths at legendary French artisan tool makers AURIOU TOOLWORKS also used to make tools for stone sculptors who use air powered chisels for their work. A bit noisy for us (and them maybe because they have stopped making them!) We have 3 gouges: 10mm wide, 15mm wide and 20mm wide. Also 2 snakes tongue (pied a biche) tools - for heavy shaping work (10 & 15mm wide) And 2 point...
£100.00 inc VAT
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
Last Ones!
Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]
New This system (RSTM-SCT2) comes with the carbide detail point cutter plus the following High Speed Steel Cutters RSTM-TIP3 HSS Square Cutter RSTM-TIP4 HSS French Curve Cutter RSTM-TIP5 HSS Dovetail/Box Cutter RSTM-TIP6 HSS Teardrop Inside/Outside Cutter RSTM-TIP7 HSS Mushroom Cutter And as a Brucey Bonus RSTM-GT2 Excelsior Detail Point Cutter (titanium nitride)
£125.00 inc VAT
Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance]
Special Offer
Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance]
New This system (RSTM-SCT3) comes with the carbide square cutter plus the following titanium nitride cutters RSTM-GT2 Excelsior Detail Point Cutter RSTM-GT4 Excelsior French Curve Cutter RSTM-GT6 Excelsior Teardrop Inside/Outside Cutter RSTM-GT7 Excelsior Mushroom Cutter
£115.00 inc VAT
Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]
Last Ones!
Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance]
These unused tools were discontinued from Flexcut USA’s portfolio of large tools several years ago. These are unused new, old stock tools in perfect condition. Flexcut designed these beefy tools to be stuck with a mallet when working on large sculptures. but of course, they can be used by hand to shape work without whacking with a mallet as required. The old Flexcut code is MC 302 which...
£15.00 inc VAT
Karl Holtey 2 1/8'' Plane Blade [Clearance]Karl Holtey 2 1/8'' Plane Blade [Clearance]
Special Offer
Karl Holtey 2 1/8'' Plane Blade [Clearance]
Unused old stock. Stamped HOLTEY. Also stamped “s”. 4” overall. 2 1/8” wide. 3/16” thick. 4 positioning holes.
£50.00 inc VAT
Karl Holtey 2 1/4'' Plane Blade [Clearance]Karl Holtey 2 1/4'' Plane Blade [Clearance]
Special Offer
Karl Holtey 2 1/4'' Plane Blade [Clearance]
Unused old stock. Stamped HOLTEY. Also stamped “2”. 9 1/8” overall. 2 ¼” wide. 3/16” thick. 7 positioning holes.
£65.00 inc VAT
SEVEN Henry Taylor Straight Fishtail Gouges [Clearance]SEVEN Henry Taylor Straight Fishtail Gouges [Clearance]
Last Ones!
SEVEN Henry Taylor Straight Fishtail Gouges [Clearance]
New current stock. A fishtail bundle! Ok – so this is excess stock created through our enthusiasm to promote this great British brand a few years back. We still love these Henry Taylor carving tools but when HT slimmed down their overall offering, we were holding quite a lot (hundreds!) of carving tools. At that point we decided to concentrate our future investment in woodcarving hand tools...
£145.00 inc VAT
1/2'' Lock Mortise Chisel [Vintage]1/2'' Lock Mortise Chisel [Vintage]
Revised
1/2'' Lock Mortise Chisel [Vintage]
A nice, socketed lock 1/2" wide mortise chisel with oak handle. 21” overall. No markers mark. Very good condition.
£24.00 inc VAT
Brusso Stainless Steel Hinges – CB302S [Clearance]Brusso Stainless Steel Hinges – CB302S [Clearance]
Revised
Brusso Stainless Steel Hinges – CB302S [Clearance]
Brusso Hardware (USA) discontinued a lot of their range over the last few years. Most of their range of stainless hinges left their portfolio but we have a few pairs left (5 pairs) in stock. These are new. The Brusso CB-302 full mortice butt hinge, measures 1¼" x 13/16". Length: 1.250" - 1¼" - 32mm Width: 0.802" - 13/16" - 21mm Leaf Thickness: 0.086" - 5/64" - 2mm NOTE - All Brusso hinges...
£48.00 inc VAT
Brusso Stainless steel shelf support K-10S [Clearance]Brusso Stainless steel shelf support K-10S [Clearance]
Revised
Brusso Stainless steel shelf support K-10S [Clearance]
The K-10S stainless steel shelf support pin comprises a decorative turned support and a cylindrical peg. Stainless steel gives the pin a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The peg measures 1/4" in diameter x 3/8" deep, and the support projects 7/16". Supplied as a set of 4 – you are buying 2 sets (8 shelf support...
£54.00 inc VAT
Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]
Last Ones!
Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]
This is old stock from the early days of starting up Classic Hand Tools. Sanderson Hardware are still going in California. (Note - these cotter pins are different to what they offer now). The diameter of the ring pull is 3/4". The rod stock is 1/8" diameter and 2 1/4” ong . The square plate is ¾” x 5/8” with 4 screw holes (screws provided). The plate has...
£12.00 inc VAT
3 Vintage Rabone Measuring Tools - Imperial [Preowned]3 Vintage Rabone Measuring Tools - Imperial [Preowned]
Special Offer
3 Vintage Rabone Measuring Tools - Imperial [Preowned]
A 33 feet Rabone steel tape No.435 - brass winder. A 100 feet Rabone steel tape No.4351 - brass winder. A Rabone No.1377 Boxwood 2 foot 4 fold rule with brass tips and hinge. All are in crisp condition for their age.
£20.00 inc VAT
Clifton No.6 Jack (Fore) Plane [Pre-owned, SOLD]Clifton No.6 Jack (Fore) Plane [Pre-owned, SOLD]
Sold
Clifton No.6 Jack (Fore) Plane [Pre-owned, SOLD]
Pre-owned (circa 2010) but very well looked after. British racing green painted body which indicates pre-Thomas Flinn takeover of the Clifton name and manufacturing process. So, this plane has a hand forged 2 3/8” wide blade with 2-piece cap iron (makes sharpening the blade a bit quicker). This size plane is often overlooked as people opt for the longer No.7 Jointer or a shorter 5 1/2....
£275.00 inc VAT
Record 311 – Rebate, Chisel & Bullnose Plane [Pre-owned, SOLD]Record 311 – Rebate, Chisel & Bullnose Plane [Pre-owned, SOLD]
Sold
Record 311 – Rebate, Chisel & Bullnose Plane [Pre-owned, SOLD]
A very good crisp example of this plane which is now made by Thomas Flinn Sheffield under the Clifton Planes (Clifton 3110) brand for £245. Supplied with a well-made fitted case with a sliding lid. 7” overall, 1 1/8” wide blade. It will be difficult to find this plane elsewhere is such good condition.
£155.00 inc VAT
Ashley Iles Bevel Edge Butt Chisels – Set of 6 [Pre-owned, SOLD]Ashley Iles Bevel Edge Butt Chisels – Set of 6 [Pre-owned, SOLD]
Ashley Iles Bevel Edge Butt Chisels – Set of 6 [Pre-owned, SOLD]
Complete with a hardwood stand to house the chisels this pre-owned set of 6 Ashley Iles chisels are all in G++ condition. (F = Fine which is basically new or unused, G++ is Good Condition ++, used but very well look after. G+ is used or some wear & tear/minor work needed. When buying tools for use you shouldn’t go below these levels (G, G- etc as these are generally for collectors rather...
£135.00 inc VAT
Lie-Nielsen Toolworks – Screwdriver Holder with bits [Pre-owned, SOLD]Lie-Nielsen Toolworks – Screwdriver Holder with bits [Pre-owned, SOLD]
Sold
Lie-Nielsen Toolworks – Screwdriver Holder with bits [Pre-owned, SOLD]
6 Wera bits accompany this Lie Nielsen Multi Tip holder. G++ - Fine condition. Boxed (dated 2008). Little used.
£75.00 inc VAT
Knew Concept 3CS Fret Saw [Pre-owned, SOLD]
Sold
Knew Concept 3CS Fret Saw [Pre-owned, SOLD]
This Knew Concepts saw pre-dates the heavier and more rigidly framed Mk. IV saws. It has the lever tension mechanism, is easy to use due to light weight. It is powder-coated red and is extremely scratch and damage resistant. The Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever...
£55.00 inc VAT
Clifton Adjustable Low Angle Block Plane [Pre-owned, SOLD]Clifton Adjustable Low Angle Block Plane [Pre-owned, SOLD]
Sold
Clifton Adjustable Low Angle Block Plane [Pre-owned, SOLD]
Pre-owned (or second-hand, if you prefer), this is an adjustable low-angle block plane made in Sheffield, England. It’s in G++ condition with 95% of the iron remaining and only minor superficial scratches or wear. Includes the original box. Cast from high-quality bronze and finished in the signature graphite colour, this plane combines comfort, style, and performance. The walnut handle...
£235.00 inc VAT
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | Last