Category
Brand
Collection
Price
Additional Filters
408 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Brusso Stainless steel shelf support K-10S [Clearance]Brusso Stainless steel shelf support K-10S [Clearance]
Revised
Brusso Stainless steel shelf support K-10S [Clearance]
The K-10S stainless steel shelf support pin comprises a decorative turned support and a cylindrical peg. Stainless steel gives the pin a modern look and does not tarnish, making it suitable for kitchen, bathroom, and marine applications. The peg measures 1/4" in diameter x 3/8" deep, and the support projects 7/16". Supplied as a set of 4 – you are buying 2 sets (8 shelf support...
£54.00 inc VAT
Woodpeckers – 300mm Rule (with Rule Stop) [Preowned]Woodpeckers – 300mm Rule (with Rule Stop) [Preowned]
Special Offer
Woodpeckers – 300mm Rule (with Rule Stop) [Preowned]
Pre-owned but these items have seen very little use. The 300mm rule reads from the centre on one edge and left to right on the other edge. Each edge is bevelled. Very crisp white markings at 1mm increments. This rule has a very high level of accuracy. These rules are precision made from aircraft grade aluminium and anodized for surface protection and appearance. Woodpeckers say they are...
£60.00 inc VAT
Veritas PMV11 – 2'' Blade [Preowned, As New]Veritas PMV11 – 2'' Blade [Preowned, As New]
Special Offer
Veritas PMV11 – 2'' Blade [Preowned, As New]
This is a replacement iron for a Veritas No.4 or No.5 ¼ hand plane. Pre-owned but appears unused. 1/8” thick.
£48.00 inc VAT
Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]
Last Ones!
Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]
This is old stock from the early days of starting up Classic Hand Tools. Sanderson Hardware are still going in California. (Note - these cotter pins are different to what they offer now). The diameter of the ring pull is 3/4". The rod stock is 1/8" diameter and 2 1/4” ong . The square plate is ¾” x 5/8” with 4 screw holes (screws provided). The plate has...
£20.00 inc VAT
Vintage Beech & Brass Brace – Lovely Patina [Preowned]Vintage Beech & Brass Brace – Lovely Patina [Preowned]
Special Offer
Vintage Beech & Brass Brace – Lovely Patina [Preowned]
There is no makers mark for this beech hand brass with brass escutcheons. The brass button that releases your bit from the brace is stiff (but you would be after 100 years or so) but it is working and will free up. This brace has a lovely patina. The head rotates freely as it should . The head may be rosewood but years of grubby carpenters hands have deposited blood sweat and tears all over the...
£45.00 inc VAT
Flexcut Left-Handed Carving Jack [Clearance]Flexcut Left-Handed Carving Jack [Clearance]
Revised
Flexcut Left-Handed Carving Jack [Clearance]
FLEXCUT CARVIN JACK - older version, new. LEFT HANDED For you whittlers out there! This is the older version of the Carvin Jack launched successfully by USA manufacturer Flexcut some 20 years ago to great acclaim. This a new unused version of the Carvin Jack in original packaging (the new version is labelled 2.0) Blades firmly lock in both open and closed positions Supplied with SlipStrop...
£88.00 inc VAT
File Sets
30%
OFF
Percent Off
File Sets
The RH Preyda File Sets, made from prized Arkansas Novaculite, are essential for deburring, chamfering, and creating smooth finishes. These files are highly valued by craftsmen such as gunsmiths, dentists, machinists, and jewelers. File shapes: Round, Square, Triangular, and Knife Blade Size: 4" x 3/8" (101.6mm x 9.5mm) Grit options: Soft (400-600), Surgical Black (4000-6000), Translucent...
Was £51.00 Now from £35.70 inc VAT
350mm Froe – Leonard Muller [Preowned, SOLD]350mm Froe – Leonard Muller [Preowned, SOLD]
Sold
350mm Froe – Leonard Muller [Preowned, SOLD]
An ash handled monster for shingle making etc. This is shop soiled which shouldn’t bother you for a froe. 350mm edge with a hefty 9mm thick back. 400mm ash handle which is 35mm in diameter. This normally sell for £120 on our site. Treat yourself.
£84.00 inc VAT
5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]
Sold
5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]
4 of these gouges have matching London pattern boxwood handles (the smallest has a 1'' split near the brass ferrule). The shorter gouges are ½'', ¾'', 1'' & 1 ½'' wide with a medium sweep. The blade lengths vary from 4'' (100mm) – 5'' (125mm). The 5th gouge has a very slightly different London pattern boxwood...
£150.00 (VAT exempt)
Auriou Ironing Rasps – 15mm wide - Unhandled [Clearance, SOLD]Auriou Ironing Rasps – 15mm wide - Unhandled [Clearance, SOLD]
Sold
Auriou Ironing Rasps – 15mm wide - Unhandled [Clearance, SOLD]
Old stock – unhandled – as new. Hand stitched by the masters of rasp and riffler making in St. Juery, France. These are flat bottomed short ironing rasps. The stitched part is 70mm long and 15mm wide. Stitched on the underside only with a cranked tang for knuckle clearance. Stitch is 8 which is medium cut. These are “old stock” and date from about 2007. Stitched...
£32.00 inc VAT
Lie-Nielsen - 7 Pocket Leather Chisel Roll [Preowned, As New, SOLD]Lie-Nielsen - 7 Pocket Leather Chisel Roll [Preowned, As New, SOLD]
Sold
Lie-Nielsen - 7 Pocket Leather Chisel Roll [Preowned, As New, SOLD]
Pre-owned but unused. A commission sale.
£82.50 (VAT exempt)
Lie-Nielsen No. 4 1/2 - Smoothing Plane [Preowned, As New, SOLD]Lie-Nielsen No. 4 1/2 - Smoothing Plane [Preowned, As New, SOLD]
Sold
Lie-Nielsen No. 4 1/2 - Smoothing Plane [Preowned, As New, SOLD]
Pre-owned, unused, as new. No box but Lie-Nielsen branded plane sack. Solidly built, this is the ultimate smoothing plane. It is longer, wider, and heavier than the No. 4, and its extra thick blade eliminates the possibility of chatter. Comes with a 45° frog as standard. Other frogs are available separately. 10-3/8" (264mm) long. 2-3/8" (60mm) blade. A2 steel. Iron body...
£410.00 inc VAT
Lie-Nielsen Toolworks Dovetail Marker [Preowned, SOLD]Lie-Nielsen Toolworks Dovetail Marker [Preowned, SOLD]
Sold
Lie-Nielsen Toolworks Dovetail Marker [Preowned, SOLD]
This brass and rosewood dovetail maker from Lie-Nielsen Toolworks was a popular item back in the day before being discontinued. This is little used and has its original box with instruction leaflet.. A commission sale.
£75.00 (VAT exempt)
Lie-Nielsen Toolworks – No.6 Fore Plane [Preowned, As New, SOLD]Lie-Nielsen Toolworks – No.6 Fore Plane [Preowned, As New, SOLD]
Sold
Lie-Nielsen Toolworks – No.6 Fore Plane [Preowned, As New, SOLD]
Pre-owned in fabulous condition, as new. The Lie-Nielsen No.6 Fore Plane is sized midway between a Jack and a Jointer. The No.6 Fore Plane is designed to further true the surface after the Jack has sized it. Its length enables it to skim off high spots as it bridges low spots, delivering a levelled surface ready for the smoothing plane. 18" (457mm) long 2 3/8" (60mm) blade....
£475.00 inc VAT
Record 077A Bullnose & Chisel Plane [Vintage, SOLD]Record 077A Bullnose & Chisel Plane [Vintage, SOLD]
Sold
Record 077A Bullnose & Chisel Plane [Vintage, SOLD]
This is great alternative to buying a new plane if your budget is constrained. G++ condition, good blade (3/4") remaining. The front nose will detach so you can use this as a chisel plane. The blade is 1 1/8" wide. This excellent site will give you further information
£45.00 inc VAT
Sash Pocket Chisel [Vintage, SOLD]Sash Pocket Chisel [Vintage, SOLD]
Sold
Sash Pocket Chisel [Vintage, SOLD]
10 ½" overall, 1 1/2" wide, with 3 1/2" long blade. Original handle with brass ferrule and leather washer. Sash pocket chisels are medium length chisels designed to cut the 'pocket piece' in the side of the frame of a sash sliding window. This pocket piece is the removeable wooden 'window' to enable access into the space at each side of sash windows where...
£28.00 inc VAT
Sorby Lock Mortise Chisel [Preowned, SOLD]Sorby Lock Mortise Chisel [Preowned, SOLD]
Sold
Sorby Lock Mortise Chisel [Preowned, SOLD]
A handsome lock mortise chisel. 18” overall including a stubby 3'' oak handle. 1/2'' wide. Owners stamp - "C GIBSON" This beast will clean up very well.
£25.00 inc VAT
This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]
Sold
This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]
This beauty dates from the 2nd World War and was of government issue. The arrow stamped in the blade is the giveaway sign for this. It is 14 1/2" long overall (about 365mm) and 2 1/2" wide (58mm) It has the original very attractive handle which is in great condition. There are many years of use left in this super chisel which tapers along its length from 1/4" to 1/8"...
£65.00 inc VAT
Tite-Mark Standard [Preowned, SOLD]Tite-Mark Standard [Preowned, SOLD]
Sold
Tite-Mark Standard [Preowned, SOLD]
Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark...
£85.00 inc VAT
Ulmia Layout Tools from Germany [Clearance, SOLD]Ulmia Layout Tools from Germany [Clearance, SOLD]
Sold
Ulmia Layout Tools from Germany [Clearance, SOLD]
We bought these in as samples to have a good look alongside the fantastic new range of squares and precision bevels we are now selling from ULMIA . New Ulmia Squares & Bevels Made from white beech these are a throwback to the days of basic wooden measuring tools and they are very nicely made indeed. 15cm square & a 33cm bevel with excellent locking finger nut. New - unused.
£33.00 inc VAT
Veritas - Small Shoulder Plane - A" Blade [Preowned, SOLD]Veritas - Small Shoulder Plane - A" Blade [Preowned, SOLD]
Sold
Veritas - Small Shoulder Plane - A" Blade [Preowned, SOLD]
Pre-owned, a commission sale. This is what we and Lee Valley Tools say about the small shoulder plane... "Designed to seat nicely in the hand, the smallest Veritas shoulder plane is easily controlled using a one-handed grip. The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest...
£165.00 (VAT exempt)
Veritas Tapered Power Tenon Cutter – 5/8'' [Preowned, SOLD]Veritas Tapered Power Tenon Cutter – 5/8'' [Preowned, SOLD]
Sold
Veritas Tapered Power Tenon Cutter – 5/8'' [Preowned, SOLD]
Used as a demo model a few times. Used but in very good condition with little blade wear. This Veritas Power tapered tenon cutter makes cutting 60-degree shouldered tenons for rustic furniture quick, easy and accurate. For use in an electric drill (not a drill press). This is the 5/8” size and you should use the drill at between 500-700 rpm. Veritas code 05J4602 Instruction leaflet...
£54.00 inc VAT
Woodturning – Robert Sorby Fingernail Bowl Gouge 3/8'' – Unhandled [Clearance, SOLD]
Sold
Woodturning – Robert Sorby Fingernail Bowl Gouge 3/8'' – Unhandled [Clearance, SOLD]
New, walleted surplus stock. The fingernail shape of this gouge increases flexibility allowing the turner to perform ‘pull cuts’ without catching the lathe bed. The greater cutting area can be used equally well for heavy profiling cuts or fine, delicate shearing cuts. RS 842F 3/8” This blade is compatible with The SOVEREIGN SYSTEM
£38.00 inc VAT
Woodturning – Robert Sorby Long & Strong Spindle Gouge 1/2'' - Unhandled [Clearance, SOLD]
Sold
Woodturning – Robert Sorby Long & Strong Spindle Gouge 1/2'' - Unhandled [Clearance, SOLD]
New, walleted surplus stock. Apart from the length of the blade, these tools are identical to Robert Sorby standard gouges. The increased length of the blades (12'') allows a further reach into the workpiece. This blade is compatible with The SOVEREIGN SYSTEM RS841 1/2''
£48.00 inc VAT
Stanley No.5 1/2 Jack Plane [Preowned, SOLD]Stanley No.5 1/2 Jack Plane [Preowned, SOLD]
Sold
Stanley No.5 1/2 Jack Plane [Preowned, SOLD]
Pre-owned in G++ condition. Attractive rosewood handles. A good user plane that has been well looked after. A commission sale.
£75.00 (VAT exempt)
Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, SOLD]Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, SOLD]
Sold
Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, SOLD]
Used but in G++ condition. A commission sale.
£85.00 (VAT exempt)
Clifton No.5 Jack Plane [Preowned, SOLD]Clifton No.5 Jack Plane [Preowned, SOLD]
Sold
Clifton No.5 Jack Plane [Preowned, SOLD]
Pre-owned but in excellent condition. A Clifton No.5 Jack Plane. The smaller of the two jack planes from Clifton. All Clifton planes have a heavy casting, so if you do not need the extra width of the wider 5 1/2 plane, this could be the jack plane for you. Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment of the...
£215.00 (VAT exempt)
Clifton No.5 1/2 Jack Plane [Preowned, SOLD]Clifton No.5 1/2 Jack Plane [Preowned, SOLD]
Sold
Clifton No.5 1/2 Jack Plane [Preowned, SOLD]
Pre-owned but in excellent condition. Usual scratch marks to sole but this is normal for moderate use. This plane has been very well cared for. The 5 1/2 is a mighty jack plane at 3.1kg and is the largest of the jack planes from Clifton. The 5 1/2 is regularly considered the "go to" plane for people starting out as it really is a versatile beastie.. The name ''jack plane''...
£245.00 (VAT exempt)
Woodpeckers 600mm Edge Rule [Preowned, As New, SOLD]Woodpeckers 600mm Edge Rule [Preowned, As New, SOLD]
Sold
Woodpeckers 600mm Edge Rule [Preowned, As New, SOLD]
Pre-owned but as new. Measuring the narrow edge of stock with typical rules is a little awkward. Getting the rule parallel to the stock and leaving yourself room to make a tick mark can become quite a juggling act. Working on the face of a piece is usually a little easier, but you can still struggle to jeep the rule parallel to your work. The Woodpeckers Woodworkers Edge Rule wraps around the edge...
£30.00 inc VAT
Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]
Sold
Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]
This plane has seen good service for many decades and remains in good condition. The original Stanley Sweetheart blade has worn down to the last 3/4'' so we have fitted a 2 3/8'' HOCK A2 cyro replacement iron for you (the original iron will also come with the plane) Patent dates of MAR 25 - 02 AUG 19- 02 APR 19 – 10 Lovely rosewood handles.
£125.00 inc VAT
Chisel Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]Chisel Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Sold
Chisel Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Chisel jaw Clamp Pair – unused as new. Pre-owned (Aug 2023) but unused. Save a few pennies!
£42.00 inc VAT
Long Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]Long Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Sold
Long Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Unused as new (Sept 2023). Pre-owned but unused. Save a few pennies!
£42.00 inc VAT
Mortise Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]Mortise Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Sold
Mortise Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Unused as new (Sept 2023). Pre-owned but unused. Save a few pennies!
£42.00 inc VAT
Set of 4 Odate Crowning Plates & an Odate Dressing Plate [Preowned, SOLD]Set of 4 Odate Crowning Plates & an Odate Dressing Plate [Preowned, SOLD]
Sold
Set of 4 Odate Crowning Plates & an Odate Dressing Plate [Preowned, SOLD]
This set of plates is from David Charlesworth workshop in North Devon at Hartland, Devon, England (see the new film featuring Gillian Anderson & Jason Isaacs called THE SALT PATH for an idea of where David lived if you have never been to Hartland). So, David will have used these (probably for testing and review for an article). The plates have not been heavily used in our opinion but are pre-owned...
£385.00 inc VAT
Flexcut Special Edition Forged 4 Knife Set [Clearance, SOLD]Flexcut Special Edition Forged 4 Knife Set [Clearance, SOLD]
Sold
Flexcut Special Edition Forged 4 Knife Set [Clearance, SOLD]
4 different bladed knives for carving / whittling. A few years back (around 2016), Flexcut USA created some Special Edition Forged Knives with drop forged precision machines blades married to bocote wood (a dark wood, similar in appearance to walnut) and leather handles for comfort and grip. Pre-sharpened by hand. The 4 knives are each just over 6” (150mm) in length overall. The blades...
£112.00 inc VAT
6 Pfeil Carving Tools [Preowned, As New, SOLD]6 Pfeil Carving Tools [Preowned, As New, SOLD]
Sold
6 Pfeil Carving Tools [Preowned, As New, SOLD]
1F/6 (fishtail chisel 6mm) 1F/12 (fishtail chisel 12mm) 3F/12 (fishtail gouge series 3 - 12mm) 5/5 (straight gouge series 5 – 5mm wide) 8/4 (straight gouge series 8 – 4mm wide) 8/10 (straight gouge series 8 – 10mm wide) No packaging. These carving tools have been used just a few times. They appear as new. A quick calculation from the Pfeil section of our website...
£125.00 inc VAT
Gunmetal Shoulder Rebate Plane with Lovely Ebony infill and wedge [Vintage, SOLD]Gunmetal Shoulder Rebate Plane with Lovely Ebony infill and wedge [Vintage, SOLD]
Sold
Gunmetal Shoulder Rebate Plane with Lovely Ebony infill and wedge [Vintage, SOLD]
This is a little cutey measuring 5'' X 2'' high x 1'' wide (excluding the wedge and blade) No makers mark and we think this is owner made (T SHARP stamped on the wedge). The mouth requires a tiny filing to bring it to square. The infill and wedge are very well done. Good iron with 3/4'' remaining. We haven't cleaned this as we don't like buffing old...
£72.00 inc VAT
Record 722 Small Router Plane [Vintage, SOLD]Record 722 Small Router Plane [Vintage, SOLD]
Sold
Record 722 Small Router Plane [Vintage, SOLD]
This webpage will tell you more about this little English router plane: Record 722 Router Plane One 1/4" straight blade. No box.
£36.00 inc VAT
Quercus Magazine – Working Wood by Hand – 6 back issues [Clearance, SOLD]Quercus Magazine – Working Wood by Hand – 6 back issues [Clearance, SOLD]
Sold
Quercus Magazine – Working Wood by Hand – 6 back issues [Clearance, SOLD]
As new. Nick Gibbs, long in the tooth English journalist was the editor of Quercus. Nick created this fantastic magazine with a lot of variety for woodworking by hand enthusiasts. Quercus Magazine was launched in June 2020 for anyone working wood by hand, with chairmaking, green woodworking, Slöjd, carving and furniture-making. After three successful years editing Quercus and taking part...
£15.00 (VAT exempt)
Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]
Sold
Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]
In mint condition. This is a commission sale for a perfectly looked after unused plane. Quite a few of these planes, whether Stanley or Record are in circulation on Ebay and the like, but the buyer must be very wary as often these planes have had a hard life, particularly the vintage planes (the rivets on the sole near the mouth loosen and cracks can develop in the castings). No such fears here...
£185.00 (VAT exempt)
Veritas No.4 1/2 Smooth Plane [Preowned, SOLD]Veritas No.4 1/2 Smooth Plane [Preowned, SOLD]
Sold
Veritas No.4 1/2 Smooth Plane [Preowned, SOLD]
This plane is from Veritas range of bench planes, launched a few years ago. Bevel down blade. Adjustable mouth. 2 3/8” wide A2 blade. Common pitch frog (45 degrees) Tall front knob. Well protected by a light covering of oil this plane is in G++ to F condition. No box. A commission sale.
£180.00 (VAT exempt)
Clifton Convex Spokeshave – No.550 [Preowned, SOLD]Clifton Convex Spokeshave – No.550 [Preowned, SOLD]
Sold
Clifton Convex Spokeshave – No.550 [Preowned, SOLD]
Pre-owned – some minor wear and cosmetic markings. G++ condition. A commission sale. Clifton spokeshaves (UK) are made from virtually unbreakable spheroidal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The...
£100.00 (VAT exempt)
Woodpeckers - 900m Rule (with Hook & Rule Stop 2) [Preowned, SOLD]Woodpeckers - 900m Rule (with Hook & Rule Stop 2) [Preowned, SOLD]
Sold
Woodpeckers - 900m Rule (with Hook & Rule Stop 2) [Preowned, SOLD]
Pre-owned but in G+ to Fine condition The rule reads left to right up to 900mm on one bevelled edge. 0-450mm from the centre on the other edge. The ''0'' mark is the exact centre of the rule, with the scale running in both directions from that point. Its quick and easy to move the rule to locate centre of a board and then lay out equal spacing from that point Engraving tolerance...
£118.00 inc VAT
Lie-Nielsen No.4 – Bronze Smoothing Plane [Preowned, As New, SOLD]Lie-Nielsen No.4 – Bronze Smoothing Plane [Preowned, As New, SOLD]
Sold
Lie-Nielsen No.4 – Bronze Smoothing Plane [Preowned, As New, SOLD]
Pre-owned in as new condition with LN plane sack. This is out of stock in our Lie-Nielsen plane section where it retails for £595. It is a popular plane. Hopefully we will be getting fresh stock during the summer. This is what we say about the brand-new version on our main LN section. “Lie-Nielsen's smoothing planes are precision machined from a manganese bronze casting, or...
£495.00 inc VAT
Lie Nielsen No.5 1/2 – Jack Plane [Preowned, As New, SOLD]Lie Nielsen No.5 1/2 – Jack Plane [Preowned, As New, SOLD]
Sold
Lie Nielsen No.5 1/2 – Jack Plane [Preowned, As New, SOLD]
An unused, “as new” plane with Lie-Nielsen branded plane sock. This is what we say about the plane in our Lie-Nielsen section… "A Lie-Nielsen No.5 1/2 Jack Plane. Probably the most popular bench plane, and the one that many woodwork teachers recommend starting out with due to its versatility. The equivalent of a later type Stanley Bedrock No.605½. 14-3/4"...
£455.00 inc VAT
Brusso Hardware – HD-638 Quadrant Hinge [Clearance, SOLD]Brusso Hardware – HD-638 Quadrant Hinge [Clearance, SOLD]
Sold
Brusso Hardware – HD-638 Quadrant Hinge [Clearance, SOLD]
Old stock (same as the new stock) but with old style packaging. This is new old stock – we are offering one pair of this hinge which is popular with box makers. The Brusso HD-638 brass quadrant hinge is engineered with a built-in stop that allows a lid to remain open at 95°. The arc is morticed into the side of the box, beneath the leaf. The hinge is sold in pairs. Each leaf measures...
£54.00 inc VAT
DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned, SOLD]DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned, SOLD]
Sold
DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned, SOLD]
That’s DC for David Charlesworth of Hartland, Devon, England. This marking knife hasn’t left it’s packaging so is new, unused stock. These marking knives were made to David’s specification by (almost a rock star) Phil Edwards of Philly Planes fame
£45.00 inc VAT
Mappa Toolworks Mallet [Preowned, As New, SOLD]Mappa Toolworks Mallet [Preowned, As New, SOLD]
Sold
Mappa Toolworks Mallet [Preowned, As New, SOLD]
A commission sale. As new, unused. This has a lovely blackwood handle with an infused maple head. It weighs 650g Overall height of 215mm with a 90mm deep head, 60mm diameter. Mappa (Netherlands) didn’t really get going as a tool making concern. 2 great hand tool enthusiasts got too busy with life, work and other distractions to build their portfolio of tools (where is that travisher boys??)...
£95.00 (VAT exempt)
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |