Friday Finds

Modelmark - Steel Number Stamps - 2.5mm [Preowned, SOLD]

Modelmark - Steel Number Stamps - 2.5mm [Preowned, SOLD]

Pre-owned, used but looking even crisper than Uncle Albert on a night out. 0-9 numbers - 2.5mm (3/32'') stamps in plastic case.

£12.00 inc VAT

Modelmark - Steel Number stamps - 3mm [Preowned, SOLD]

Modelmark - Steel Number stamps - 3mm [Preowned, SOLD]

Pre-owned, used but looking crisp. 0-9 numbers - 3mm stamps in a plastic storage case.

£12.00 inc VAT

Mortise Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]

Mortise Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]

Unused as new (Sept 2023). Pre-owned but unused. Save a few pennies!

£42.00 inc VAT

NO KNICKERS! Lie-Nielsen Toolworks Rebating Block Plane No.507 [Preowned, SOLD]

NO KNICKERS! Lie-Nielsen Toolworks Rebating Block Plane No.507 [Preowned, SOLD]

Pre-owned in little used condition with Lie-Nielsen branded plane sack The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R). This 12° angle rebate block plane is based on an old Sargent block plane (No 507). The plane body is made from unbreakable ductile iron and is ground flat and square to .001". The cap iron is polished...

£165.00 inc VAT

Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]

Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]

They may look a bit scruffy but in fact that is just dried oil in the photos which disguises tools in G++ condition with full blades and nice rosewood knobs. This pair will clean up nicely. Patent date of Jan 95 (that will be 1895!).

£138.00 inc VAT

Paring chisels – 4 lovelies [Vintage]

Well looked after vintage paring chisels all with brass ferrules. Some bashing to the handles (crack to the largest size and a split to the 1” chisel but they are functional and fit for good use) Marples & Sons, Sheffield - 15 1/2” (390mm) overall – 8” (200mm) blade – 1 ¼” (32mm) wide bevel edge paring chisel Hearnshaw Brothers, Sheffield...

£84.00 inc VAT

Pfeil Carving Tools Set of 8 with Roll [Preowned, Unused, SOLD]

Pfeil Carving Tools Set of 8 with Roll [Preowned, Unused, SOLD]

Unused, and unusual in that these Swiss made carving tools have attractive stained handles. This Pfeil 8 piece carving set is a starter set containing 7 full size fully forged tools and one chip carving tool. The set is supplied in a rugged canvas roll case and the tools are honed and sharpened ready for use. The tools included are 1/12, 1s/12, 5/12, 4/20, 7/10, 9/4, 12/8 and KERB12. So...

£210.00 (VAT exempt)

Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New, SOLD]

Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New, SOLD]

Made by Pfeil - Switzerland These tools are very popular based on our experience in selling Pfeil carving tools for the last 15 years (but clearly not by our customer though, as he has never used them!). Precisely ground and polished. Pear handles, 70mm blade length, 125mm overall length. The set which is housed in a wooden stand includes: 1 straight chisel 8mm (L1-8); 1 skew...

£215.00 (VAT exempt)

Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]

Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]

Made by Pfeil - Switzerland Unused - fine condition - a commission sale. These Pfeil Punches for wood are for creating background detail for your carvings. They are made from steel and weigh 540g each. They are housed in a wooden base. Size - 10mm x 10mm x 135mm each. These are the same set of puches as Classic Hand Tools sell in their Pfeil carving tools section for £170 (and...

£125.00 (VAT exempt)

Philip Marcou - Smoothing Plane [Preowned]

Philip Marcou - Smoothing Plane [Preowned]

Offers are invited in the region of £2500 for this fabulous plane. Email sales@classichandtools.com or call 01473 784983 to discuss

£2,500.00 (VAT exempt)

Plough Plane Project [Preowned, SOLD]

So, this grubbly plane, like Fraser, needs a good clean. Beech, with brass tips, escutcheons and depth stop screw. You do not need to put on the marigolds or find a buffing wheel to clean it up. Nothing too heavy is needed , just a bit of tender loving care with a bit of fine wire wool to clean off a few idle paint marks, years of dust layers and a minor amount of surface rust. We think this...

£75.00 inc VAT

Preston's Patent Reeder [Preowned, SOLD]

Preston's Patent Reeder [Preowned, SOLD]

This was from David Charlesworth's workshop in Devon but did not make the sale of his 100 best tools only because the 2 fence screws do not match each other (they work as they should - see photo). One double reeding cutter (2 flutes each). 2 fences, one straight, one with a slight radius. We think this was repainted some time ago as it presents as near perfect.

£55.00 inc VAT

Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-0 [Clearance, SOLD]

Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-0 [Clearance, SOLD]

1/2 Round Max width 14.8mm - Max thickness 4.7mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a coarse file grade 0 00 is the coarsest file 2 is medium 6 is the finest grade. Machine made. Still in rust proof paper. Fine condition, as new.

£22.00 inc VAT

Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-00 [Clearance, SOLD]

Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-00 [Clearance, SOLD]

1/2 Round shape Max width 14.8mm - Max thickness 4.7mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a coarse file grade 00 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust proof paper. Fine condition, as new.

£20.00 inc VAT

Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-2 [Clearance, SOLD]

Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-2 [Clearance, SOLD]

1/2 round shape Max width 14.8mm - Max thickness 4.7mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a medium file grade 2 00 is the coarsest grade file 6 is the finest grade. Machine made. Still in rust proof paper. Fine condition, as new.

£25.00 inc VAT

Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-1 [Clearance, SOLD]

Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-1 [Clearance, SOLD]

Described as Crossing shape on the label (effectively a tapered file which has 2 convex sides - one flatter than the other). Max width 21.3mm - Max thickness 6.3mm Overall length with tang - 270mm Filed surface length 190mm Unhandled This is a coarse - medium file grade 1 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust proof paper. Fine condition as new.

£42.00 inc VAT

Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-2 [Clearance, SOLD]

Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-2 [Clearance, SOLD]

Described as Crossing shape on the label (effectively a tapered file which has 2 convex sides - one flatter than the other). Max width 21.3mm - Max thickness 6.3mm Overall length with tang - 270mm Filed surface length 190mm Unhandled This is a medium file grade 2 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust proof paper. Fine condition as new.

£42.00 inc VAT

Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-3 [Clearance, SOLD]

Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-3 [Clearance, SOLD]

Described as Crossing shape on the label (effectively a tapered file which has 2 convex sides - one flatter than the other). Max width 21.3mm - Max thickness 6.3mm Overall length with tang - 270mm Filed surface length 190mm Unhandled This is a medium/fine file grade 3 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust proof paper. One very minor surface blemish otherwise...

£42.00 inc VAT

Quality Swiss Precision File by Glardon-Vallorbe LPV1560-6-00 [Clearance, SOLD]

Quality Swiss Precision File by Glardon-Vallorbe LPV1560-6-00 [Clearance, SOLD]

1/2 Round Max width 14.8mm - Max thickness 4.7mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a coarse file grade 00 with Valtan coating 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust proof paper. Fine, as new condition.

£22.00 inc VAT

Quality Swiss Precision File by Glardon-Vallorbe LPV1560-8-2 [Clearance, SOLD]

Quality Swiss Precision File by Glardon-Vallorbe LPV1560-8-2 [Clearance, SOLD]

1/2 Round shape Max width 21.1mm - Max thickness 6.3mm Overall length with tang - 270mm Filed surface length 190mm Unhandled This is a medium file grade 2 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust proof paper. This file has special Valitan Coating 72HRc. Fine condition as new.

£32.00 inc VAT

Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-00 [Clearance, SOLD]

Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-00 [Clearance, SOLD]

Described as Crossing shape on the label (effectively a tapered file which has 2 convex sides - one flatter than the other). This file has a special coating VALITAN 72HRc Max width 14.8mm - Max thickness 5mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a coarse file grade 00 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust...

£25.00 inc VAT

Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-1 [Clearance, SOLD]

Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-1 [Clearance, SOLD]

Described as Crossing shape on the label (effectively a tapered file which has 2 convex sides - one flatter than the other). This file has a special coating VALITAN 72HRc Max width 14.8mm - Max thickness 5mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a coarse - medium file grade 1 00 is the coarsest file 2 is medium 6 is the finest grade. Machine made. Still...

£30.00 inc VAT

Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-2 [Clearance, SOLD]

Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-2 [Clearance, SOLD]

Described as Crossing shape on the label (effectively a tapered file which has 2 convex sides - one flatter than the other). This file has a special coating VALITAN 72HRc Max width 14.8mm - Max thickness 5mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a medium file grade 2 00 is the coarsest grade file 6 is the finest grade. Machine made. Still in...

£32.00 inc VAT

Quansheng - No.5 Bedrock Pattern Bench Plane [Preowned, Unused, SOLD]

Quansheng - No.5 Bedrock Pattern Bench Plane [Preowned, Unused, SOLD]

Unused, in original box and packaging, as new. Cherry handles, 2'' wide blade. 14'' overall length (355mm) This is a commission sale on behalf of a customer.

£115.00 (VAT exempt)

Quercus Magazine – Working Wood by Hand – 6 back issues [Clearance, SOLD]

Quercus Magazine – Working Wood by Hand – 6 back issues [Clearance, SOLD]

As new. Nick Gibbs, long in the tooth English journalist was the editor of Quercus. Nick created this fantastic magazine with a lot of variety for woodworking by hand enthusiasts. Quercus Magazine was launched in June 2020 for anyone working wood by hand, with chairmaking, green woodworking, Slöjd, carving and furniture-making. After three successful years editing Quercus and taking part...

£15.00 (VAT exempt)

Rabone & E Preston & Sons - Boxwood & Brass Rules [Preowned, SOLD]

Rabone & E Preston & Sons - Boxwood & Brass Rules [Preowned, SOLD]

3 nice boxwood & brass rules. These are all in good condition. A light clean will dislodge any lingering cosmetic marks. 4'' caliper rule No.1466 - Rabone. 24'' four fold rule - No.1380 - Rabone 48'' four fold rule - No.3276 - E. Prestons & Sons Birmingham

£36.00 inc VAT

Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]

Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]

Pre Loved

£25.00 inc VAT

Record 00 - Vice [Preowned, SOLD]

Pre Loved

Was £42.00 Now £36.00 inc VAT

Record 041 Shoulder Plane (5/8'' Blade) [Preowned, SOLD]

Record 041 Shoulder Plane (5/8'' Blade) [Preowned, SOLD]

This is preowned, has a full blade, and has seen little or no use.

£84.00 inc VAT

Record 043 Plough Plane [Preowned, Unused, SOLD]

Record 043 Plough Plane [Preowned, Unused, SOLD]

This sweet little Record plough plane No. 043 is 140mm (5 1/2'') overall designed for making small rebates and cutting grooves. The 043 has an adjustable depth stop, 2 arms and a bridged fence which can be used on either side of the plane body (for left or right handed use). Original (tatty box). The plane is unused. 3mm, 4.5mm & 6.4mm cosmetically tarnished blades. Commission...

£75.00 (VAT exempt)

Record 077A Bullnose & Chisel Plane [Vintage]

Record 077A Bullnose & Chisel Plane [Vintage]

This is great alternative to buying a new plane if your budget is constrained. G++ condition, good blade (3/4") remaining. The front nose will detach so you can use this as a chisel plane. The blade is 1 1/8" wide. This excellent site will give you further information

£45.00 inc VAT

Record 405 Multi-Plane [Preowned, SOLD]

A little used Record 405 in its original box, complete with a full set of cutters and instruction booklet. Here is a great place to look and learn about this plane. Note this plane comes with 23 standard cutters. The plane has a stained beech handle.

£175.00 inc VAT

Record 722 Small Router Plane [Vintage, SOLD]

Record 722 Small Router Plane [Vintage, SOLD]

This webpage will tell you more about this little English router plane: Record 722 Router Plane One 1/4" straight blade. No box.

£36.00 inc VAT

Record 778 Rebate & Fillester Plane [Preowned, Unused, SOLD]

Record 778 Rebate & Fillester Plane [Preowned, Unused, SOLD]

Unused in original packaging. No. 778 plane has two positions for the cutter — one for ordinary work, and the other for bull-nose work. It is fitted with a hardened steel spur, an adjustable depth gauge which is removable, and an adjustable fence which can be used on either side of the plane. This plane is adaptable for many other purposes besides rabbeting when the fence and arms are...

£72.00 inc VAT

Record Calvert Stephens - CS88 Bench Plane [Preowned, SOLD]

Record Calvert Stephens - CS88 Bench Plane [Preowned, SOLD]

This is a commission sale on behalf of a customer. This limited edition plane was made by Record Tools. The excellent reference site dedicated to Record Tools is the best place to discover more information on all matters Record including detailed information about this plane (although the prices they quote are 17 years out of date!). Information on the Record No. CS88 Calvert Stevens Smooth...

£325.00 (VAT exempt)

Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]

Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]

In mint condition. This is a commission sale for a perfectly looked after unused plane. Quite a few of these planes, whether Stanley or Record are in circulation on Ebay and the like, but the buyer must be very wary as often these planes have had a hard life, particularly the vintage planes (the rivets on the sole near the mouth loosen and cracks can develop in the castings). No such fears here...

£185.00 (VAT exempt)

Record Imp No. 80 Vice [Preowned, SOLD]

Smooth working vice with anvil. This is a genuinely good and original example of this handy little beastie. It is designed to clamp to your workbench and has 2 1/4'' jaws that open to about 2 3/4''.

£42.00 inc VAT

Record Imp No. 80 Vice [Preowned, SOLD]

Smooth working vice with anvil. This is a genuinely good and original example of this handy little beastie. We sold one just like it a couple of weeks ago and this is as good as that one. It is designed to clamp to your workbench and has 2 1/4'' jaws that open to about 2 3/4''.

£36.00 inc VAT

Record No.50 Combination Plane [Preowned, Unused, SOLD]

Record No.50 Combination Plane [Preowned, Unused, SOLD]

This is in super unused condition with the instruction booklet. The box is a bit tatty with a torn lid but the plane is in fine condition with all the bits n pieces, cutters etc all present and very correct. Pre-owned, commission sale.

£150.00 (VAT exempt)

Record Technical Jack Plane - T5 [Preowned, SOLD]

Record Technical Jack Plane - T5 [Preowned, SOLD]

Missing the side handle. This plane benefits from a Clifton hand forged 2'' wide blade. Read all about it here.. In good working condition.

£64.00 inc VAT

Richard Kell Wonder Bundle [Preowned, SOLD]

Richard Kell Wonder Bundle [Preowned, SOLD]

Sold

£100.00 inc VAT

Robert Sorby Sovereign Ultima Hollowing System – Unhandled Medium 18'' [Clearance]

This is a new tool in that it is Classic Hand Tools’ unsold stock (we are having a summer spring clean!). The video shows you all you need to know but this description may also help. Medium Ultima Unhandled (SOV-RSULTM) A part of Robert Sorby Sovereign System but is also a stand-alone tool when installed in Sovereign handle. The Ultima Blade enables woodturners to produce hollow forms...

£165.00 inc VAT

Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance]

New This system (RSTM-SCT3) comes with the carbide square cutter plus the following titanium nitride cutters RSTM-GT2 Excelsior Detail Point Cutter RSTM-GT4 Excelsior French Curve Cutter RSTM-GT6 Excelsior Teardrop Inside/Outside Cutter RSTM-GT7 Excelsior Mushroom Cutter

£125.00 inc VAT

Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]

New This system (RSTM-SCT2) comes with the carbide detail point cutter plus the following High Speed Steel Cutters RSTM-TIP3 HSS Square Cutter RSTM-TIP4 HSS French Curve Cutter RSTM-TIP5 HSS Dovetail/Box Cutter RSTM-TIP6 HSS Teardrop Inside/Outside Cutter RSTM-TIP7 HSS Mushroom Cutter And as a Brucey Bonus RSTM-GT2 Excelsior Detail Point Cutter (titanium nitride)

£135.00 inc VAT

Robert Sorby TURNMASTER Woodturning System [Clearance]

New "old" tool that we are clearing from our stock due to a summer stock clean. This system (RSTM-SCT3) comes with the single carbide square cutter only. Some more info here from Robert Sorby

£75.00 inc VAT

Saddlers Round Knife - C S Osborne & Co. Newark N.J [Preowned, SOLD]

Saddlers Round Knife - C S Osborne & Co. Newark N.J [Preowned, SOLD]

This is a lovely vintage Saddlers round knife from the USA manufacturer CS Osborne. It is difficult to date but from its form and simplistic beauty we hazard a guess that it is an early one dating as far back as the 19th Century.The blade has a lovely ring to it when flicked by a finger. It is marked ''C S Osborne & Co. Newark N.J Made in USA'' on the blade. It is also marked...

£50.00 inc VAT

Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]

Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]

This is old stock from the early days of starting up Classic Hand Tools. Sanderson Hardware are still going in California. (Note - these cotter pins are different to what they offer now). The diameter of the ring pull is 3/4". The rod stock is 1/8" diameter and 2 1/4” ong . The square plate is ¾” x 5/8” with 4 screw holes (screws provided). The plate has...

£20.00 inc VAT

Sash Pocket Chisel [Vintage, SOLD]

10 ½" overall, 1 1/2" wide, with 3 1/2" long blade. Original handle with brass ferrule and leather washer. Sash pocket chisels are medium length chisels designed to cut the 'pocket piece' in the side of the frame of a sash sliding window. This pocket piece is the removeable wooden 'window' to enable access into the space at each side of sash windows where...

£28.00 inc VAT

Category

Collection

Price

Additional Filters

Sort By

Per Page

View