Category
Collection
Price
Additional Filters
244 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
1 1/4'' Coopers Bung Auger [Preowned, SOLD]1 1/4'' Coopers Bung Auger [Preowned, SOLD]
Sold
1 1/4'' Coopers Bung Auger [Preowned, SOLD]
Made by Wm. Marples, Sheffield This has a 9'' beech handle with a tapered auger that is stamped 1 1/4'' Wm Marples., Sheffield. It will clean up to G++ with little effort. No rust at all, the handle just needs a light clean with some wax and wire wool.
£24.00 inc VAT
1.5mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]1.5mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]
Sold
1.5mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]
Very crisp set of 26 letters plus ampersand (&) plus numbers 0-9 These are unused and are in their original cases.
£36.00 inc VAT
1/2'' Lock Mortise Chisel [Vintage, SOLD]1/2'' Lock Mortise Chisel [Vintage, SOLD]
Sold
1/2'' Lock Mortise Chisel [Vintage, SOLD]
A nice, socketed lock 1/2" wide mortise chisel with oak handle. 21” overall. No markers mark. Very good condition.
£20.00 inc VAT
1/2” Mortise Chisel – Brades & Co. [Pre-owned, SOLD]1/2” Mortise Chisel – Brades & Co. [Pre-owned, SOLD]
Sold
1/2” Mortise Chisel – Brades & Co. [Pre-owned, SOLD]
As good as you’ll get if you want an old-style oval handles mortise chisel. This bad boy hasn’t done any work we think.
£30.00 inc VAT
10 Lie-Nielsen Chisels (with Afrcian Blackwood Handles) [Preowned, Unused, SOLD]10 Lie-Nielsen Chisels (with Afrcian Blackwood Handles) [Preowned, Unused, SOLD]
Sold
10 Lie-Nielsen Chisels (with Afrcian Blackwood Handles) [Preowned, Unused, SOLD]
Pre-owned, about 12 years old but unused. A commission sale. 10 bevel edge chisels by Lie-Nielsen Toolworks with specially commissioned African Blackwood handles made by Blue Spruce Toolworks. These beauties are possibly a unique combination. This is a commission sale on behalf of a great customer of ours who feels they should go to a good home where someone will put them to good use. All...
£1,800.00 (VAT exempt)
10mm Corner Chisel [Preowned, SOLD]10mm Corner Chisel [Preowned, SOLD]
Sold
10mm Corner Chisel [Preowned, SOLD]
Manufacturer unknown. Oval beech handle with brass ferrule and leather washer. 240mm overall with 120mm handle. HSS blade. Blade thickness is a very consistent 2.5 mm up to where it bevels. This has been well made whoever did it.
£28.00 inc VAT
13 Ashley Iles Carving Tools [Preowned, SOLD]13 Ashley Iles Carving Tools [Preowned, SOLD]
Sold
13 Ashley Iles Carving Tools [Preowned, SOLD]
Pre-owned beech handled carving tools. All from one careful owner. 3.2mm (1/8'') single straight chisel 3.2mm (1/8'') veining gouge 12mm (3/8'') deep V (45 degree) parting tool 10mm (3/8'') shallow gouge (split ferrule) 10mm (3/8'') shallow fishtail gouge 4.5mm (3/16'') deep gouge 3.2mm (1/8'') deep gouge 8mm (5/16'')...
£180.00 inc VAT
15 Quality Ash Chisel Handles (with Brass Ferrules) [Clearance, SOLD]15 Quality Ash Chisel Handles (with Brass Ferrules) [Clearance, SOLD]
Sold
15 Quality Ash Chisel Handles (with Brass Ferrules) [Clearance, SOLD]
The octagonal ash handles are all 130mm including a tapered brass ferrule Suitable for bench chisels or carving tools. Clear lacquer finish to show off the grain. Five 17mm wide handles with 13mm wide ferrules. Seven 19mm wide handles with 13mm ferrules. One 22mm wide handles with 15mm ferrule. One 26mm wide handle with 17mm ferrule. One 28mm wide handle with 20mm ferrule.
£65.00 inc VAT
150mm Square - Woodpeckers 641 [Preowned, SOLD]150mm Square - Woodpeckers 641 [Preowned, SOLD]
Sold
150mm Square - Woodpeckers 641 [Preowned, SOLD]
Pre Loved
£60.00 inc VAT
1” Bevel Edged Cranked Paring Chisel – Buck Bros [Vintage, Refurbished, SOLD]1” Bevel Edged Cranked Paring Chisel – Buck Bros [Vintage, Refurbished, SOLD]
Sold
1” Bevel Edged Cranked Paring Chisel – Buck Bros [Vintage, Refurbished, SOLD]
This is perfectly functional chisel which has been refurbished nicely to include a replacement boxwood London Pattern Octagonal handle. 1” wide, bevel edged, the tang is cranked so to allow for knuckle clearance whilst paring. 13 1/2” overall. (Note - it is difficult to find a new equivalence to give you a price guide, however a shorter bevel edge cranked 1” wide chisel from...
£42.00 (VAT exempt)
1” Moving Fillester Plane by John Moseley & Son, London [Vintage, SOLD]1” Moving Fillester Plane by John Moseley & Son, London [Vintage, SOLD]
Sold
1” Moving Fillester Plane by John Moseley & Son, London [Vintage, SOLD]
This is a lovely fillester plane by John Moseley & Son, 54-55 Broad Street, Bloomsbury, London Beech with boxwood wear strip & nicker wedge. Good clear, crisp stamp. 9 ½” x 2” overall The original owner obviously coveted this plane as the initials “FGC” are stamped very boldly into the side of the plane. John Moseley was making planes in Broad...
£75.00 inc VAT
2 Beall Tool Co. Wood Threader Kits [Pre-owned, SOLD]
Sold
2 Beall Tool Co. Wood Threader Kits [Pre-owned, SOLD]
1" and 1 1/2". Each complete kit contains: Wood Threader Router Attachment, specially made Internal Threading Tap, complete hardware for attachments, carbide router bit and full instructions. Used very successfully but only once and as new. Note that the Beall Tool Co was sold to Lee Valley and these threader kits and spares are now sold by Classic Hand Tools. A commission sale.
£120.00 (VAT exempt)
2 Bessey UniKlamps – 300mm [Clearance, SOLD]
Sold
2 Bessey UniKlamps – 300mm [Clearance, SOLD]
New - Unused – (a mistake on our ordering!) Throat depth 80mm Jaw width 30mm Rail – 20mm x 5mm
£30.00 inc VAT
2 Good Oval Handled Mortise Chisels 3/16'' & 3/8'' [Vintage, SOLD]
Sold
2 Good Oval Handled Mortise Chisels 3/16'' & 3/8'' [Vintage, SOLD]
These would be termed vintage. In fact, these 2 were made centuries ago! They are great tools with original handles (in good but slightly grubby condition which can easily be rectified with a bit of wax and elbow grease). The chisels are not heavily used and will give a few decades of service. These legendary Sheffiled toolmaking companies made these mortise chisels between the times stated. 3/16''...
£115.00 inc VAT
2 Iyoroi Japanese Slick Chisels [Preowned, Unused, SOLD]2 Iyoroi Japanese Slick Chisels [Preowned, Unused, SOLD]
Sold
2 Iyoroi Japanese Slick Chisels [Preowned, Unused, SOLD]
Unused paring chisels/slicks from Iyoroi who are makers from Japan. Widths are 36mm & 42mm All with single hollows. Length overall of 580mm Red Oak handles. The blades are 120mm long. Bevel edged. These are long paring chisels refered to as slicks and are used for cleaning up joints such as the mortise and tenon joints. They are not design to be struck with a mallet or hammer. A...
£215.00 (VAT exempt)
2 Marples Bevel Edge Paring Chisels [Pre-owned]2 Marples Bevel Edge Paring Chisels [Pre-owned]
Sold
2 Marples Bevel Edge Paring Chisels [Pre-owned]
These are lovely! Slender boxwood handled paring chisels 3/8" and 1/4" wide.Very good condition G++. Restored, flattened and sharpened. A commission sale.
£50.00 (VAT exempt)
2 pairs of Adjustable Hand Clamps by Dubuque, Ohio, USA. 'Moose Brand' [Pre-owned, As New, SOLD]2 pairs of Adjustable Hand Clamps by Dubuque, Ohio, USA. 'Moose Brand' [Pre-owned, As New, SOLD]
Sold
2 pairs of Adjustable Hand Clamps by Dubuque, Ohio, USA. 'Moose Brand' [Pre-owned, As New, SOLD]
The jaws are made with fine quality American hard maple. The spindles and swivel nuts are of cold drawn carbon steel. The Dubuque hand screw clamp is a versatile chap. The first pair: Jaw length: 10'' (250mm). Clamp opening: 7'' (175mm). The second pair: Jaw length: 4'' (100mm). Clamp opening: 2¼'' (56mm). Unused and fine condition. A...
£55.00 (VAT exempt)
2 Ray Iles Mortise Chisels [Pre-owned, SOLD]2 Ray Iles Mortise Chisels [Pre-owned, SOLD]
Sold
2 Ray Iles Mortise Chisels [Pre-owned, SOLD]
Pre-owned but superbly cared for! So much so that the owner made a handsome box with a sliding lid to house these two beech handled mortise chisels made by Ray Iles of England. ¼” & 3/8” wide. 12” overall.
£185.00 inc VAT
2 Scratch Awls - Bridge City Tool Works [Preowned, Unused, SOLD]2 Scratch Awls - Bridge City Tool Works [Preowned, Unused, SOLD]
Sold
2 Scratch Awls - Bridge City Tool Works [Preowned, Unused, SOLD]
SA - 2 v 2 - 8" (200mm) scratch awl (blue handle) SA - 3 v 2 - 8" (200mm) bent tip scratch awl (black handle) These have not been used. The lids to the original BC boxes are all missing. CNC-turned and anodised aluminium heads. Used for scribing wood, metal, glass, ceramics etc. You can draw lines in the tightest of situations, such as dovetails, mortises, tenons or profiles. The hardened steel...
Was £40.00 Now £36.00 inc VAT
2 Spokeshaves [Vintage, SOLD]2 Spokeshaves [Vintage, SOLD]
Sold
2 Spokeshaves [Vintage, SOLD]
8” beech bodied spokeshave with1 ½” straight blade, in good order. Stamped Parry & Son 359 Old St. with the Sundial logo. An adjustable mouth beech bodied spokeshave with brass adjusting knobs and curved wear strip to the sole which houses the 3” blade. No cracks, Made by J. Frost Norwich, England. 11 1/2” overall. J.Frost, Norwich dates from 1864-1892. Both...
£65.00 inc VAT
3 Bridge City Tool Works Scratch Awls [Preowned, Unused, SOLD]3 Bridge City Tool Works Scratch Awls [Preowned, Unused, SOLD]
Sold
3 Bridge City Tool Works Scratch Awls [Preowned, Unused, SOLD]
SA 1 v 2 - 4 1/2" (115mm) scratch awl (red handle) SA - 2 v 2 - 8" (200mm) scratch awl (blue handle) SA - 3 v 2 - 8" (200mm) bent tip scratch awl (black handle) CNC-turned and anodised aluminium heads. Used for scribing wood, metal, glass, ceramics etc. You can draw lines in the tightest of situations, such as dovetails, mortises, tenons or profiles. The hardened steel blade is long and narrow and...
£60.00 inc VAT
3 French Drags – Quality Stone Masons Tools [Clearance, SOLD]3 French Drags – Quality Stone Masons Tools [Clearance, SOLD]
Sold
3 French Drags – Quality Stone Masons Tools [Clearance, SOLD]
French drags are the equivalent of the plane in woodworking. They are used for soft stone and consist of 9 blades set at skewed angles over the length of a block of wood. 2 of these drags have toothed blades (straight and circular) to allow removal of surface material. The 3rd drag (30mm width) has toothless blades for smoothing out the surface of the stone. These 3 drags have the same overall...
£85.00 inc VAT
3 Gimlets with Boxwood Handles [Preowned, SOLD]
Sold
3 Gimlets with Boxwood Handles [Preowned, SOLD]
These lovely vintage gimlets 170mm, 130mm & 90mm. These will always find use in your workshop.
£18.00 inc VAT
3 Henry Taylor Fishtail Carving Gouges [New, Clearance]
Sold
3 Henry Taylor Fishtail Carving Gouges [New, Clearance]
Last Ones!
£45.00 inc VAT
3 Lovely Vintage Brass Backed Saws [Vintage]3 Lovely Vintage Brass Backed Saws [Vintage]
Sold
3 Lovely Vintage Brass Backed Saws [Vintage]
Refurbished to a high standard. E C ATKINS 13tpi X- CROSS CUT TENON SAW – DEEP BRASS BACK 14” BLADE – attractive closed handle with ATKINS medallion FROST DOVE STREET NORWICH – SPECIAL – 18tpi DOVETAIL SAW 9” BLADE, CLOSED BEECH HANDLE 12” SPEAR & JACKSON 13tpi X – CUT “Leapfrog” tenon saw All straight bladed. A lovely collection. A...
£99.00 (VAT exempt)
3 Vintage Mortise Chisels [Vintage, SOLD]3 Vintage Mortise Chisels [Vintage, SOLD]
Sold
3 Vintage Mortise Chisels [Vintage, SOLD]
These beauties (2 stamped BUCK and the larger one stamped I & H SORBY) I & H SORBY – octagonal handle – ½” wide BUCK – oval handle 3/16” wide BUCK – oval handle 3/8” wide Great condition. 11 1/2” - 12 ¼” overall length.
£72.00 inc VAT
3 Vintage Rabone Measuring Tools - Imperial [Preowned, SOLD]3 Vintage Rabone Measuring Tools - Imperial [Preowned, SOLD]
Sold
3 Vintage Rabone Measuring Tools - Imperial [Preowned, SOLD]
A 33 feet Rabone steel tape No.435 - brass winder. A 100 feet Rabone steel tape No.4351 - brass winder. A Rabone No.1377 Boxwood 2 foot 4 fold rule with brass tips and hinge. All are in crisp condition for their age.
£20.00 inc VAT
36” Straight Rule [Rare, Vintage]36” Straight Rule [Rare, Vintage]
Special Offer
36” Straight Rule [Rare, Vintage]
Made from beech with brass edges and ends, this is a lovely rule with clear markings on the upper face which has one bevelled edge. 36” long, ½” thick and 2 ¼” deep. So this is a heavy rule which was desirable so it didn't slide about. The person who owned it told Classic Hand Tools that is was used in aTailors shop. This is perfectly believable but it...
£48.00 inc VAT
3mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]3mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]
Sold
3mm Steel Hand Stamps - MODELMARK [Preowned, Unused, SOLD]
Very crisp set of 26 letters plus ampersand (&) plus numbers 0-9 These are unused and are in their original cases.
£36.00 inc VAT
4 Ray Iles Mortise Chisels [Preowned, SOLD]4 Ray Iles Mortise Chisels [Preowned, SOLD]
Sold
4 Ray Iles Mortise Chisels [Preowned, SOLD]
Very little used these are very well made mortise chisels by legendary English tool maker Ray Iles. These do not find their way on the market very often as they are not any easy tool to make and Ray tends to send his production to Tools for Working Wood in the USA. So, these tools have been sparingly used. The beech handles are slightly rounded at the butt (by special request) to make them more...
£360.00 (VAT exempt)
4 Small Beech Rebate Planes [Preowned, SOLD]4 Small Beech Rebate Planes [Preowned, SOLD]
Sold
4 Small Beech Rebate Planes [Preowned, SOLD]
All with the same owners stamp C Gibson. Convex from front to toe. 4 1/8” long C NURSE & CO. LONDON (owners stamp R. Gibson) Boat shaped sole. 4 ½” long. NURSE (C Gibson) Straight rebate. 4 ½” long. NURSE (C Gibson) Rounded sole. 4” long. (R. Gibson) All the wedges and irons are in g++ condition. It is a sweet collection. We have given...
£60.00 inc VAT
5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned, SOLD]5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned, SOLD]
Sold
5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned, SOLD]
These are pre-owned - little used chisels with cosmetic staining to the steel blades. We have quickly cleaned them up and we think they will be absolutely fine for many years to come presenting a very affordable opportunity to get a good spread of bench chisels. 3/8", 1/2", 5/8", 1", 1 1/4" wide Boxwood round handles with brass ferrules (the largest one is split but it isn't working free and could...
£65.00 (VAT exempt)
5 French Walnut Handles (with Tapered Brass Ferrules) [Clearance, SOLD]5 French Walnut Handles (with Tapered Brass Ferrules) [Clearance, SOLD]
Sold
5 French Walnut Handles (with Tapered Brass Ferrules) [Clearance, SOLD]
Attractive French Walnut handles for chisels, rasps etc 5" overall (125mm) with 3/4" diameter ferrule, rounded profile with waist. The handles are pre-drilled with a 4mm diameter hole about 12mm deep. Clear lacquer finish. New old stock.
£30.00 inc VAT
5 Henry Taylor Straight Carving Gouges [New, Clearance]
Last Ones!
5 Henry Taylor Straight Carving Gouges [New, Clearance]
Last 3 sets!
£75.00 inc VAT
5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned, SOLD]5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned, SOLD]
Sold
5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned, SOLD]
These 10 planes are all in G++ condition. We haven’t cleaned them up, but they will clean up beautifully. The wedges are all fine and the blades are working well. The planes are all stamped with the same owner’s stamp "C GIBSON" They came out of a joiner’s chest with some other tools featured in this week’s Fridays Finds. Pairs of No. 2, 4, 10, 12 &...
£88.00 inc VAT
5 Tasai Bench Chisels [Preowned, SOLD]5 Tasai Bench Chisels [Preowned, SOLD]
Sold
5 Tasai Bench Chisels [Preowned, SOLD]
These are pre-owned bevel edged bench chisels from the forge of master blacksmith Akio Tasai in Japan. A commission sale. They have been used very sparingly; the hoops have been struck and there are burrs to be attended to in order to safeguard your fingers but that is a quick and easy job. The chisels and box are in G++ condition. Laminated steel with single hollows. The cutting edge is blue...
£945.00 inc VAT
5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]
Sold
5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]
4 of these gouges have matching London pattern boxwood handles (the smallest has a 1'' split near the brass ferrule). The shorter gouges are ½'', ¾'', 1'' & 1 ½'' wide with a medium sweep. The blade lengths vary from 4'' (100mm) – 5'' (125mm). The 5th gouge has a very slightly different London pattern boxwood...
£150.00 (VAT exempt)
6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]
Sold
6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]
Six, unused Jorgensen hand screws. As new. A commission sale. From the manufacturer's website... "Seasoned, straight-grain hard maple wood jaws marry with cold drawn steel-spindles and nuts with special double-lead threads. Together they create a handscrew clamp that holds tightly over broad areas, providing greater reach and a wider distribution of pressure than other clamps. The angle...
£180.00 (VAT exempt)
6 Marples Paring Chisels (from 1/4'' to 1 1/2'' wide) [Preowned, SOLD]6 Marples Paring Chisels (from 1/4'' to 1 1/2'' wide) [Preowned, SOLD]
Sold
6 Marples Paring Chisels (from 1/4'' to 1 1/2'' wide) [Preowned, SOLD]
These are boxwood handled chisels have overall lengths between 330mm and 400mm Pre-owned but these have seen little use. Commission sale. 1/4'', 3/8'', 5/8'', 3/4'', 1'' & 1 1/4''
£180.00 (VAT exempt)
6 Pattermakers gouges [Vintage]6 Pattermakers gouges [Vintage]
Special Offer
6 Pattermakers gouges [Vintage]
These are well looked after patternmakers cranked paring gouges. Different makers and non-matching handles. These came from a pattern maker in the West Midlands area of England. A pattern maker is often referred to as the “king of trades” and whenever we get hold of pattern makers hand tools they are generally in very good condition, as is the case here. 12” “ to 16“...
£75.00 inc VAT
6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]
Sold
6 Rasp/Chisel handles – French Walnut [Clearance, SOLD]
Attractive French Walnut handles for chisels, rasps etc. 5" overall (125mm) with 3/4" diameter ferrule, rounded profile with waist. The handles are pre-drilled with a 4mm diameter hole about 12mm deep. Clear lacquer finish. New old stock.
£35.00 inc VAT
7 Excellent Paring Gouges – Marples & Ibbotson [Vintage, SOLD]7 Excellent Paring Gouges – Marples & Ibbotson [Vintage, SOLD]
Sold
7 Excellent Paring Gouges – Marples & Ibbotson [Vintage, SOLD]
Featuring famous makers from Sheffield, England - William Marples & Sons (5 of the 7) and Thomas Ibbotson (2). Did you know that Marples acquired Thomas Ibbotsons assets in 1905? – nor did we! A mix of long paring gouges with different handle styles and wood species, all with ferrules and virtually no defects (just one very short crack in one handle). A very tactile bunch of gouges. Overall...
£60.00 inc VAT
7 Pneumatic Stone Carving Tools - Auriou [Clearance, SOLD]7 Pneumatic Stone Carving Tools - Auriou [Clearance, SOLD]
Sold
7 Pneumatic Stone Carving Tools - Auriou [Clearance, SOLD]
Yes! The blacksmiths at legendary French artisan tool makers AURIOU TOOLWORKS also used to make tools for stone sculptors who use air powered chisels for their work. A bit noisy for us (and them maybe because they have stopped making them!) We have 3 gouges: 10mm wide, 15mm wide and 20mm wide. Also 2 snakes tongue (pied a biche) tools - for heavy shaping work (10 & 15mm wide) And 2 point...
£100.00 inc VAT
9'' Straight Drawknife by Marsden Brothers [Preowned, SOLD]9'' Straight Drawknife by Marsden Brothers [Preowned, SOLD]
Sold
9'' Straight Drawknife by Marsden Brothers [Preowned, SOLD]
Beech handles with brass ferules. This is a lovely drawknife which will serve you well for many a chair leg. The makers stamp is a little indistinct but it is Marsden Brothers. Owner’s stamp of C GIBSON
£58.00 inc VAT
A 2” wide firmer chisel by Mathieson – Glasgow [Vintage]A 2” wide firmer chisel by Mathieson – Glasgow [Vintage]
Revised
A 2” wide firmer chisel by Mathieson – Glasgow [Vintage]
Warranted cast steel. Steel hooped oak handled firmer chisel by famous Scottish maker Mathieson (note – take care with the hoop and it has an edge caused by being struck repeatedly which requires a bit of rounding off, a 3 minute job) 12 ½” overall. Blade life is 4”
£42.00 inc VAT
A Family of J Rabone & Sons Engineers Spirit Levels [Vintage]A Family of J Rabone & Sons Engineers Spirit Levels [Vintage]
Special Offer
A Family of J Rabone & Sons Engineers Spirit Levels [Vintage]
Baby level is 6” long by 1” wide by 1 1/4” high Mummy level is 7 ¾” long by 1 1/4” wide by 1 1/2””high Daddy level is 12 “ long by 1 ½” wide by 2 ½”high. Each have a protective rotating cover for the main horizontal vial. The small lateral horizontal vial and the short vertical vial bubbles are all working...
£112.00 inc VAT
A nest of 3 Stanley Planes [Preowned, SOLD]A nest of 3 Stanley Planes [Preowned, SOLD]
Sold
A nest of 3 Stanley Planes [Preowned, SOLD]
Sold
£135.00 inc VAT
A Stanley Bailey (USA) No. 8 Jointer Plane [Pre-owned]A Stanley Bailey (USA) No. 8 Jointer Plane [Pre-owned]
Sold
A Stanley Bailey (USA) No. 8 Jointer Plane [Pre-owned]
24” long with 2 5/8” wide original (thin) cutter with 1 1/2” life left before you need to invest in a replacement blade (we sell these!) A very good example of this jointer plane with original rosewood handle and front knob in very good condition. Production of this plane stopped in 1958 and we think this is a type 14 which dates it to 1939-1940. At over 85 years old, this super...
£195.00 inc VAT
Page: 1 | 2 | 3 | 4 | 5 | 6 |