Category
Collection
Price
Additional Filters
510 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Lie-Nielsen Toolworks No.7 Jointer Plane [Pre-owned]Lie-Nielsen Toolworks No.7 Jointer Plane [Pre-owned]
Revised
Lie-Nielsen Toolworks No.7 Jointer Plane [Pre-owned]
Pre-owned, imperfect due to use and some minor staining/discolouration. This is a very popular plane and one of Classic Hand Tools’ best sellers. This plane has had some minor moisture damage. We have cleaned the plane and believe it to be perfectly functional with a good blade. The tote and knob are almost as new. If you want pristine, then do not purchase this plane. If you want a good user,...
EUR €487.05 excl tax, duties and fees
Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]
Sold
Lie-Nielsen Toolworks Small Chisel Plane No.97 1/2 [Preowned, SOLD]
Pre-owned but hardly used at all. This Lie-Nielsen small chisel plane comes with a branded LN sack to keep it protected. The Lie-Nielsen Chisel Plane is the perfect little tool 175mm x 45mm (6½" x 1¾") for removing glue and trimming dowel plugs. It is very useful for working into corners and to the ends of rebates. The heavy 4.8mm - 3/16" A2 thick blade is set at 12 degrees. The blade is as new. You...
EUR €167.13 excl tax, duties and fees
Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]
Sold
Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]
Pre-owned in excellent, unused condition This description is from our site where this plane (without plane sack is available for £245) ''This is the smallest of the Lie-Nielsen ''Preston style'' shoulder planes, 5/8'' wide, 5 3/4'' long. The blade is 0.140'' thick, and the tool weighs 1.35 lbs. With an adjustable mouth like its larger siblings,...

5

EUR €186.23 excl tax, duties and fees
Lie-Nielsen Toolworks – No.6 Fore Plane [Preowned, As New, SOLD]Lie-Nielsen Toolworks – No.6 Fore Plane [Preowned, As New, SOLD]
Sold
Lie-Nielsen Toolworks – No.6 Fore Plane [Preowned, As New, SOLD]
Pre-owned in fabulous condition, as new. The Lie-Nielsen No.6 Fore Plane is sized midway between a Jack and a Jointer. The No.6 Fore Plane is designed to further true the surface after the Jack has sized it. Its length enables it to skim off high spots as it bridges low spots, delivering a levelled surface ready for the smoothing plane. 18" (457mm) long 2 3/8" (60mm) blade....
EUR €453.63 excl tax, duties and fees
Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]
Revised
Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]
This plane is a little bit rare these days!
EUR €444.08 excl tax, duties and fees
Lie-Nielsen Toolworks – Screwdriver Holder with bits [Pre-owned, SOLD]Lie-Nielsen Toolworks – Screwdriver Holder with bits [Pre-owned, SOLD]
Sold
Lie-Nielsen Toolworks – Screwdriver Holder with bits [Pre-owned, SOLD]
6 Wera bits accompany this Lie Nielsen Multi Tip holder. G++ - Fine condition. Boxed (dated 2008). Little used.
EUR €71.63 excl tax, duties and fees
Lie-Nielsen – 1/2'' Mortise Chisel [Preowned, As New, SOLD]Lie-Nielsen – 1/2'' Mortise Chisel [Preowned, As New, SOLD]
Sold
Lie-Nielsen – 1/2'' Mortise Chisel [Preowned, As New, SOLD]
Unused – pre-owned, as new Exactly the same chisel sells in our LN section for £138.
EUR €103.14 excl tax, duties and fees
Lie-Nielsen – 3/8'' Corner Chisels [Preowned, SOLD]Lie-Nielsen – 3/8'' Corner Chisels [Preowned, SOLD]
Sold
Lie-Nielsen – 3/8'' Corner Chisels [Preowned, SOLD]
Pre-owned but unused. A commission sale. Producing square mortises is exacting work. The Corner Chisel, used after the mortise has been roughed out by hand or with a slot mortiser—which produces round edged mortises—helps square corners easily and precisely. Made from A2 Tool Steel, hardened to RC 60-62 and ground razor sharp. Bevelled at 30º. Overall length is approximately 10". No box.
EUR €143.25 excl tax, duties and fees
Lie-Nielsen – 5 Bevel Edge Chisels [Preowned, As New, SOLD]Lie-Nielsen – 5 Bevel Edge Chisels [Preowned, As New, SOLD]
Sold
Lie-Nielsen – 5 Bevel Edge Chisels [Preowned, As New, SOLD]
This is a good deal for these chisels from Lie-Nielsen Toolworks USA They are unused, as new in original packaging. Widths - ¼'', 3/8'', ½'', ¾'' & 1'' Each box stamped April 2023 Possibly the best ''deal'' on Friday Finds! Save yourself a few hard-earned pounds (currently selling for £490 in our main...
EUR €515.70 excl tax, duties and fees
Lie-Nielsen – Pair of 1/2'' Skew Chisels [Preowned, SOLD]Lie-Nielsen – Pair of 1/2'' Skew Chisels [Preowned, SOLD]
Sold
Lie-Nielsen – Pair of 1/2'' Skew Chisels [Preowned, SOLD]
Pre-owned but still with the wax on the ends. A commission sale. These skew chisels are not currently offered by Lie-Nielsen so this is a rare opportunity to purchase. No box.
EUR €286.50 excl tax, duties and fees
Lie–Nielsen Scrub Plane – LN 40 1/2 [Pre-owned]Lie–Nielsen Scrub Plane – LN 40 1/2 [Pre-owned]
Lie–Nielsen Scrub Plane – LN 40 1/2 [Pre-owned]
This plane hasn’t done much scrubbing yet as judged by its full iron and excellent overall condition. Boxed. This plane is based on the Stanley 40 1/2 and is designed to remove large quantities of wood quickly e.g. taking rough-sawn boards down to size, before finishing with a Jack Plane and a Smoothing Plane. It is also useful for shaping irregular objects or creating an interesting, finished...
EUR €176.68 excl tax, duties and fees
Long Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]Long Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Sold
Long Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Unused as new (Sept 2023). Pre-owned but unused. Save a few pennies!
EUR €40.11 excl tax, duties and fees
Mappa Toolworks Mallet [Preowned, As New, SOLD]Mappa Toolworks Mallet [Preowned, As New, SOLD]
Sold
Mappa Toolworks Mallet [Preowned, As New, SOLD]
A commission sale. As new, unused. This has a lovely blackwood handle with an infused maple head. It weighs 650g Overall height of 215mm with a 90mm deep head, 60mm diameter. Mappa (Netherlands) didn’t really get going as a tool making concern. 2 great hand tool enthusiasts got too busy with life, work and other distractions to build their portfolio of tools (where is that travisher boys??)...
EUR €108.87 excl tax, duties and fees
Marples Bevel Edged Bench Chisels x4 (1/4'', 3/8'', 5/8'' & 3/4'') [Preowned, SOLD]Marples Bevel Edged Bench Chisels x4 (1/4'', 3/8'', 5/8'' & 3/4'') [Preowned, SOLD]
Sold
Marples Bevel Edged Bench Chisels x4 (1/4'', 3/8'', 5/8'' & 3/4'') [Preowned, SOLD]
Pre-owned, little used, will clean up easily to look almost new. Beech handles with brass ferrules. 220-240mm overall. Edge guards included.
EUR €34.38 excl tax, duties and fees
Marples Paring Chisels 1'' & 3/4'' [Preowned, Unused, SOLD]Marples Paring Chisels 1'' & 3/4'' [Preowned, Unused, SOLD]
Sold
Marples Paring Chisels 1'' & 3/4'' [Preowned, Unused, SOLD]
385mm overall with 140mm boxwood handles Pre-owned - Unused The 1'' has a cracked brass ferrule. Otherwise in G++ condition. We don't think they have done any work. The handles and blades are marked Marples. 2 bevel edge paring chisels.
EUR €45.84 excl tax, duties and fees
Martinez Signature Series 7075 - Metric Rapid Square (with base) [Preowned, SOLD]Martinez Signature Series 7075 - Metric Rapid Square (with base) [Preowned, SOLD]
Sold
Martinez Signature Series 7075 - Metric Rapid Square (with base) [Preowned, SOLD]
This is a commission sale. Used but in G++ condition. This US made roofing square with a 180mm metric blade designed for accuracy and durability. Made with aerospace grade aluminium, hard anodised, this square is light and strong with very, easy to read measurements. The base (or heel) is anodised aluminium in red (no level) providing a reliable base that improves control and precision in marking...
EUR €100.85 excl tax, duties and fees
Millers Falls Hand Vice with bits [Preowned, SOLD]Millers Falls Hand Vice with bits [Preowned, SOLD]
Sold
Millers Falls Hand Vice with bits [Preowned, SOLD]
A bit of vintage fun with this lovely example of a Millers Falls hand vice with 6 bits. The bits are secretly housed in the ebony handle which has a screw top, The handle can be screwed into the vice from the underside or from the side. All original. 6 bits include a little circular anvil, 3 chisels and 2 V shaped bits bent at right angle. Lightly cleaned to reveal the maker's mark...
Was €68.76 Now EUR €55.01 excl tax, duties and fees
Modelmark - Steel Number Stamps - 2.5mm [Preowned, SOLD]Modelmark - Steel Number Stamps - 2.5mm [Preowned, SOLD]
Sold
Modelmark - Steel Number Stamps - 2.5mm [Preowned, SOLD]
Pre-owned, used but looking even crisper than Uncle Albert on a night out. 0-9 numbers - 2.5mm (3/32'') stamps in plastic case.
EUR €11.46 excl tax, duties and fees
Modelmark - Steel Number stamps - 3mm [Preowned, SOLD]Modelmark - Steel Number stamps - 3mm [Preowned, SOLD]
Sold
Modelmark - Steel Number stamps - 3mm [Preowned, SOLD]
Pre-owned, used but looking crisp. 0-9 numbers - 3mm stamps in a plastic storage case.
EUR €11.46 excl tax, duties and fees
Mortise Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]Mortise Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Sold
Mortise Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Unused as new (Sept 2023). Pre-owned but unused. Save a few pennies!
EUR €40.11 excl tax, duties and fees
NO KNICKERS! Lie-Nielsen Toolworks Rebating Block Plane No.507 [Preowned, SOLD]NO KNICKERS! Lie-Nielsen Toolworks Rebating Block Plane No.507 [Preowned, SOLD]
Sold
NO KNICKERS! Lie-Nielsen Toolworks Rebating Block Plane No.507 [Preowned, SOLD]
Pre-owned in little used condition with Lie-Nielsen branded plane sack The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R). This 12° angle rebate block plane is based on an old Sargent block plane (No 507). The plane body is made from unbreakable ductile iron and is ground flat and square to .001". The cap iron is polished...
EUR €157.58 excl tax, duties and fees
No.9 Mitre Plane - Lie-Nielsen Toolworks [Preowned, SOLD]No.9 Mitre Plane - Lie-Nielsen Toolworks [Preowned, SOLD]
Sold
No.9 Mitre Plane - Lie-Nielsen Toolworks [Preowned, SOLD]
Pre-owned and used sparingly. This is the iron bodied version with the side handle. Later models had the option of a "hot dog" attachment which would still work with this model if you thought you needed it although this bad boy maybe heading to a collector. This discontinued beauty has marks of use. The sole is 90-95% free of any marks as are the side faces. This is not pristine,...
EUR €596.88 excl tax, duties and fees
Pair of No.12 Hollow & Round by John Moseley & Son [Vintage, SOLD]Pair of No.12 Hollow & Round by John Moseley & Son [Vintage, SOLD]
Sold
Pair of No.12 Hollow & Round by John Moseley & Son [Vintage, SOLD]
A nice pair! Hollows and rounds were made in matched pairs, thin ones marked No1 and widest ones generally stopped at No.18 (yes, we have seen a No.20 matched pair but that is rare) No.12's have cutters that are 3/4" wide. Wedges and irons in very good order. John Moseley was making planes in Broad Street from 1862-1894 (Source : Goodman, British Planemakers from 1700) There...
EUR €23.88 excl tax, duties and fees
Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]
Sold
Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]
They may look a bit scruffy but in fact that is just dried oil in the photos which disguises tools in G++ condition with full blades and nice rosewood knobs. This pair will clean up nicely. Patent date of Jan 95 (that will be 1895!).
EUR €131.79 excl tax, duties and fees
Panel Raising Plane [Vintage, SOLD]Panel Raising Plane [Vintage, SOLD]
Sold
Panel Raising Plane [Vintage, SOLD]
A beech bodied panel raising plane with good 2 ¼'' skew iron by Greaves. The plane does not have a maker’s name but is well made and is in very good order. 8 ½'' long.
EUR €38.20 excl tax, duties and fees
Paring chisels – 4 lovelies [Vintage, SOLD]Paring chisels – 4 lovelies [Vintage, SOLD]
Sold
Paring chisels – 4 lovelies [Vintage, SOLD]
Well looked after vintage paring chisels all with brass ferrules. Some bashing to the handles (crack to the largest size and a split to the 1” chisel but they are functional and fit for good use) Marples & Sons, Sheffield - 15 1/2” (390mm) overall – 8” (200mm) blade – 1 ¼” (32mm) wide bevel edge paring chisel Hearnshaw Brothers, Sheffield...
EUR €80.22 excl tax, duties and fees
Pfeil Carving Tools Set of 8 with Roll [Preowned, Unused, SOLD]Pfeil Carving Tools Set of 8 with Roll [Preowned, Unused, SOLD]
Sold
Pfeil Carving Tools Set of 8 with Roll [Preowned, Unused, SOLD]
Unused, and unusual in that these Swiss made carving tools have attractive stained handles. This Pfeil 8 piece carving set is a starter set containing 7 full size fully forged tools and one chip carving tool. The set is supplied in a rugged canvas roll case and the tools are honed and sharpened ready for use. The tools included are 1/12, 1s/12, 5/12, 4/20, 7/10, 9/4, 12/8 and KERB12. So...
EUR €240.66 excl tax, duties and fees
Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New, SOLD]Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New, SOLD]
Sold
Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New, SOLD]
Made by Pfeil - Switzerland These tools are very popular based on our experience in selling Pfeil carving tools for the last 15 years (but clearly not by our customer though, as he has never used them!). Precisely ground and polished. Pear handles, 70mm blade length, 125mm overall length. The set which is housed in a wooden stand includes: 1 straight chisel 8mm (L1-8); 1 skew...
EUR €246.39 excl tax, duties and fees
Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]
Sold
Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]
Made by Pfeil - Switzerland Unused - fine condition - a commission sale. These Pfeil Punches for wood are for creating background detail for your carvings. They are made from steel and weigh 540g each. They are housed in a wooden base. Size - 10mm x 10mm x 135mm each. These are the same set of puches as Classic Hand Tools sell in their Pfeil carving tools section for £170 (and...
EUR €143.25 excl tax, duties and fees
Philip Marcou - Smoothing Plane [Preowned, SOLD]Philip Marcou - Smoothing Plane [Preowned, SOLD]
Sold
Philip Marcou - Smoothing Plane [Preowned, SOLD]
Offers are invited in the region of £2500 for this fabulous plane.  Email sales@classichandtools.com or call 01473 784983 to discuss
EUR €2,865.00 excl tax, duties and fees
Philly Planes – 24'' Jointer Plane [Pre-owned]Philly Planes – 24'' Jointer Plane [Pre-owned]
Sold
Philly Planes – 24'' Jointer Plane [Pre-owned]
60mm wide with 4mm thick tombstone shaped blade. Designed to make things flat! This plane has done next to no work. Beech, lovely handle, gentle chamfering. ''PHILLY PLANES MADE IN ENGLAND'' Stamped on the front of the plane. (Also, the initials CWW)
EUR €238.75 excl tax, duties and fees
Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned]Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned]
Sold
Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned]
This was a commission plane for an English customer. The plane is a skewed rebate plane with a 1 3/16'' blade set in a 1 7/8'' wide body with a full width fence that is ¾'' deep. The plane is 9 ¼'' long. It has a nicked iron as shown in the photograph and a full length brass wear strip. Philly Planes stamped on the front of the plane. We can...
EUR €238.75 excl tax, duties and fees
Philly Planes – Superior Marking Gauge [Pre-owned]Philly Planes – Superior Marking Gauge [Pre-owned]
Sold
Philly Planes – Superior Marking Gauge [Pre-owned]
Brass & rosewood stock, this pre-owned marking, cutting and pencil gauge is beautifully made by Welsh eccentric and tool maker Phil Edwards who is well know for his wooden plane making prowess (if not for his singing – almost a private joke – sorry!). This is what Phil says about this gauge on his website: Our traditional style marking gauge is made from Rosewood, brass and high...
EUR €90.73 excl tax, duties and fees
Plough Plane Project [Preowned, SOLD]Plough Plane Project [Preowned, SOLD]
Sold
Plough Plane Project [Preowned, SOLD]
So, this grubbly plane, like Fraser, needs a good clean. Beech, with brass tips, escutcheons and depth stop screw. You do not need to put on the marigolds or find a buffing wheel to clean it up. Nothing too heavy is needed , just a bit of tender loving care with a bit of fine wire wool to clean off a few idle paint marks, years of dust layers and a minor amount of surface rust. We think this...
EUR €71.63 excl tax, duties and fees
Preston's Patent Reeder [Preowned, SOLD]Preston's Patent Reeder [Preowned, SOLD]
Sold
Preston's Patent Reeder [Preowned, SOLD]
This was from David Charlesworth's workshop in Devon but did not make the sale of his 100 best tools only because the 2 fence screws do not match each other (they work as they should - see photo). One double reeding cutter (2 flutes each). 2 fences, one straight, one with a slight radius. We think this was repainted some time ago as it presents as near perfect.
EUR €52.53 excl tax, duties and fees
Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-0 [Clearance, SOLD]Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-0 [Clearance, SOLD]
Sold
Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-0 [Clearance, SOLD]
1/2 Round Max width 14.8mm - Max thickness 4.7mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a coarse file grade 0 00 is the coarsest file 2 is medium 6 is the finest grade. Machine made. Still in rust proof paper. Fine condition, as new.
EUR €21.01 excl tax, duties and fees
Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-00 [Clearance, SOLD]Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-00 [Clearance, SOLD]
Sold
Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-00 [Clearance, SOLD]
1/2 Round shape Max width 14.8mm - Max thickness 4.7mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a coarse file grade 00 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust proof paper. Fine condition, as new.
EUR €19.10 excl tax, duties and fees
Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-2 [Clearance, SOLD]Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-2 [Clearance, SOLD]
Sold
Quality Swiss Precision File by Glardon-Vallorbe LP1560-6-2 [Clearance, SOLD]
1/2 round shape Max width 14.8mm - Max thickness 4.7mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a medium file grade 2 00 is the coarsest grade file 6 is the finest grade. Machine made. Still in rust proof paper. Fine condition, as new.
EUR €23.88 excl tax, duties and fees
Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-1 [Clearance, SOLD]Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-1 [Clearance, SOLD]
Sold
Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-1 [Clearance, SOLD]
Described as Crossing shape on the label (effectively a tapered file which has 2 convex sides - one flatter than the other). Max width 21.3mm - Max thickness 6.3mm Overall length with tang - 270mm Filed surface length 190mm Unhandled This is a coarse - medium file grade 1 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust proof paper. Fine condition as new.
EUR €40.11 excl tax, duties and fees
Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-2 [Clearance, SOLD]Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-2 [Clearance, SOLD]
Sold
Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-2 [Clearance, SOLD]
Described as Crossing shape on the label (effectively a tapered file which has 2 convex sides - one flatter than the other). Max width 21.3mm - Max thickness 6.3mm Overall length with tang - 270mm Filed surface length 190mm Unhandled This is a medium file grade 2 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust proof paper. Fine condition as new.
EUR €40.11 excl tax, duties and fees
Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-3 [Clearance, SOLD]Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-3 [Clearance, SOLD]
Sold
Quality Swiss Precision File by Glardon-Vallorbe LP1960-8-3 [Clearance, SOLD]
Described as Crossing shape on the label (effectively a tapered file which has 2 convex sides - one flatter than the other). Max width 21.3mm - Max thickness 6.3mm Overall length with tang - 270mm Filed surface length 190mm Unhandled This is a medium/fine file grade 3 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust proof paper. One very minor surface blemish otherwise...
EUR €40.11 excl tax, duties and fees
Quality Swiss Precision File by Glardon-Vallorbe LPV1560-6-00 [Clearance, SOLD]Quality Swiss Precision File by Glardon-Vallorbe LPV1560-6-00 [Clearance, SOLD]
Sold
Quality Swiss Precision File by Glardon-Vallorbe LPV1560-6-00 [Clearance, SOLD]
1/2 Round Max width 14.8mm - Max thickness 4.7mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a coarse file grade 00 with Valtan coating 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust proof paper. Fine, as new condition.
EUR €21.01 excl tax, duties and fees
Quality Swiss Precision File by Glardon-Vallorbe LPV1560-8-2 [Clearance, SOLD]Quality Swiss Precision File by Glardon-Vallorbe LPV1560-8-2 [Clearance, SOLD]
Sold
Quality Swiss Precision File by Glardon-Vallorbe LPV1560-8-2 [Clearance, SOLD]
1/2 Round shape Max width 21.1mm - Max thickness 6.3mm Overall length with tang - 270mm Filed surface length 190mm Unhandled This is a medium file grade 2 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust proof paper. This file has special Valitan Coating 72HRc. Fine condition as new.
EUR €30.56 excl tax, duties and fees
Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-00 [Clearance, SOLD]Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-00 [Clearance, SOLD]
Sold
Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-00 [Clearance, SOLD]
Described as Crossing shape on the label (effectively a tapered file which has 2 convex sides - one flatter than the other). This file has a special coating VALITAN 72HRc Max width 14.8mm - Max thickness 5mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a coarse file grade 00 00 is the coarsest file 6 is the finest grade. Machine made. Still in rust...
EUR €23.88 excl tax, duties and fees
Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-1 [Clearance, SOLD]Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-1 [Clearance, SOLD]
Sold
Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-1 [Clearance, SOLD]
Described as Crossing shape on the label (effectively a tapered file which has 2 convex sides - one flatter than the other). This file has a special coating VALITAN 72HRc Max width 14.8mm - Max thickness 5mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a coarse - medium file grade 1 00 is the coarsest file 2 is medium 6 is the finest grade. Machine made. Still...
EUR €28.65 excl tax, duties and fees
Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-2 [Clearance, SOLD]Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-2 [Clearance, SOLD]
Sold
Quality Swiss Precision File by Glardon-Vallorbe LPV1960-6-2 [Clearance, SOLD]
Described as Crossing shape on the label (effectively a tapered file which has 2 convex sides - one flatter than the other). This file has a special coating VALITAN 72HRc Max width 14.8mm - Max thickness 5mm Overall length with tang - 200mm Filed surface length 140mm Unhandled This is a medium file grade 2 00 is the coarsest grade file 6 is the finest grade. Machine made. Still in...
EUR €30.56 excl tax, duties and fees
Quansheng - No.5 Bedrock Pattern Bench Plane [Preowned, Unused, SOLD]Quansheng - No.5 Bedrock Pattern Bench Plane [Preowned, Unused, SOLD]
Sold
Quansheng - No.5 Bedrock Pattern Bench Plane [Preowned, Unused, SOLD]
Unused, in original box and packaging, as new. Cherry handles, 2'' wide blade. 14'' overall length (355mm) This is a commission sale on behalf of a customer.
EUR €131.79 excl tax, duties and fees
Quercus Magazine – Working Wood by Hand – 6 back issues [Clearance, SOLD]Quercus Magazine – Working Wood by Hand – 6 back issues [Clearance, SOLD]
Sold
Quercus Magazine – Working Wood by Hand – 6 back issues [Clearance, SOLD]
As new. Nick Gibbs, long in the tooth English journalist was the editor of Quercus. Nick created this fantastic magazine with a lot of variety for woodworking by hand enthusiasts. Quercus Magazine was launched in June 2020 for anyone working wood by hand, with chairmaking, green woodworking, Slöjd, carving and furniture-making. After three successful years editing Quercus and taking part...
EUR €17.19 excl tax, duties and fees
Page: First | | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |