Friday Finds

Sorby Lock Mortise Chisel [Preowned, SOLD]

Sorby Lock Mortise Chisel [Preowned, SOLD]

A handsome lock mortise chisel. 18” overall including a stubby 3'' oak handle. 1/2'' wide. Owners stamp - "C GIBSON" This beast will clean up very well.

£25.00 inc VAT

Stanley 271 - Small Router Plane [Preowned, SOLD]

Stanley 271 - Small Router Plane [Preowned, SOLD]

A little used Stanley 271 small router plane Marked 'STANLEY No.271 MADE IN ENG' on the body of the plane. 1/4'' cutter which can be mounted for use as either an open or closed throat router. 3'' x 2'' overall. In original orange box with instruction leaflet.

£36.00 inc VAT

Stanley 444 Dovetail Tongue & Groove Plane [Preowned, Professionally Restored, SOLD]

Stanley 444 Dovetail Tongue & Groove Plane [Preowned, Professionally Restored, SOLD]

This is a rare beast. This example has been professionally re-nickel plated and 4 new blades have been made to complete the plane. This plane was designed for the precision planing of dovetail joints. The STANLEY 444 Dovetail plane was manufactured between 1912 and 1938 so it is very rare to find something so old in mint condition as the nickel plating always deteriorates over time if the...

£750.00 (VAT exempt)

Stanley 45 Combination Plane in Original Metal Box [Pre-owned]

This is a Stanley 45 Universal Plane It is in very good working order and has its spur cutters and original fittings. Unused set of 21 boxed cutters to include. 6 beading cutters. Two match cutters. One sash cutter. 11 plow and dado cutters. One fillester cutter (please ignore the wooden rods in the photo, they are to help with packing in the metal box only!) The plane is in very...

£145.00 inc VAT

Stanley 78 Rebate plane [Pre-owned, SOLD]

Stanley 78 Rebate plane [Pre-owned, SOLD]

Unused in original cardboard box.

£45.00 inc VAT

Stanley 79 Double-sided Rebate Plane [Pre-owned, SOLD]

Stanley 79 Double-sided Rebate Plane [Pre-owned, SOLD]

In superb condition. This also has an owner made bespoke wooden base to keep it safely housed. The best example of thus plane we have seen.

£75.00 inc VAT

Stanley 90 Bullnose Plane [Preowned, SOLD]

Stanley 90 Bullnose Plane [Preowned, SOLD]

Pre Loved

£48.00 inc VAT

Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]

Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]

This plane has seen good service for many decades and remains in good condition. The original Stanley Sweetheart blade has worn down to the last 3/4'' so we have fitted a 2 3/8'' HOCK A2 cyro replacement iron for you (the original iron will also come with the plane) Patent dates of MAR 25 - 02 AUG 19- 02 APR 19 – 10 Lovely rosewood handles.

£125.00 inc VAT

Stanley Bedrock No.7 Jointer Plane [Vintage, SOLD]

Stanley Bedrock No.7 Jointer Plane [Vintage, SOLD]

22” square sided Stanley Bedrock Jointer plane for finishing large surfaces and for trueing up the edges of boards so that they can be closely fitted or joined together. Markings as follows Bedrock is cast into the plane body ahead of the front knob. Bedrock is cast into the cap iron. No 607 (at rear of plane) and just behind the frog themselves is in the casting PATD APR 2...

£195.00 inc VAT

Stanley Double Sided Rebate Plane – No.79 [Vintage, SOLD]

Stanley Double Sided Rebate Plane – No.79 [Vintage, SOLD]

A very crisp example of this classic little side rebate pane with original parts and good cutter life left. A nice little plane. Made in England. This plane is designed to help with accurately trimming dados, grooves and mouldings. The body houses two skew cutters set at a very low angle. 5 ½” overall. It also has a reversible nose for each side to allow for closer corner...

£65.00 (VAT exempt)

Stanley No.10 Rebate Plane [Pre-owned, SOLD]

Stanley No.10 Rebate Plane [Pre-owned, SOLD]

Popular with timber framers and the like. This plane is ready to work. Stanley England. Original iron. Very good condition with slight chip at corner of the mouth 1/16” (1.5mm). Priced to sell quickly!

£65.00 inc VAT

Stanley No.113 Circular Plane [Vintage, SOLD]

Stanley No.113 Circular Plane [Vintage, SOLD]

STanley Rule & Level Co.

£115.00 inc VAT

Stanley No.18 steel bevel - The Eureka [Preowned, SOLD]

Stanley No.18 steel bevel - The Eureka [Preowned, SOLD]

Pre Loved

Was £72.00 Now £66.00 inc VAT

Stanley No.4 1/2 (with Clifton Replacement Blade & Hock Cap iron) [Pre-owned, SOLD]

Stanley No.4 1/2 (with Clifton Replacement Blade & Hock Cap iron) [Pre-owned, SOLD]

This plane is a Stanley Bailey 4 ½ smoother that has a black japanned body and frog with stained beech replacement handle with high front knob (see trade label) and lever cap from Record . It also has the considerable benefit of a hand forged 2 3/8” wide replacement blade by Clifton, Sheffield. It also has a Hock cap iron. So, one very good plane made up of 4 famous names. A good...

£85.00 (VAT exempt)

Stanley No.5 1/2 Jack Plane [Preowned, SOLD]

Stanley No.5 1/2 Jack Plane [Preowned, SOLD]

Pre-owned in G++ condition. Attractive rosewood handles. A good user plane that has been well looked after. A commission sale.

£75.00 (VAT exempt)

Stanley No.50 Combination Plane [Preowned, Unused, SOLD]

Stanley No.50 Combination Plane [Preowned, Unused, SOLD]

It is quite easy to find this plane on reselling sites like Ebay etc. However, unlike many of the examples on those sites, this Stanley No.50 Combination plane is in unused, "as new" condition, in its original box (this has been drawn on in felt tip pen), with instruction leaflet, with the 17 cutters in the wooden cutter holder, has both spurs and the nickel plating is 95+ untarnished. 9 plough/dado...

£135.00 (VAT exempt)

Stanley No.50 Plow Plane [Pre-owned, As New, SOLD]

Stanley No.50 Plow Plane [Pre-owned, As New, SOLD]

Almost perfect condition. Unused in original box with cutters.

£75.00 inc VAT

Stanley No.6 Jack Plane & Record 4 ½ Smoother [Vintage, SOLD]

Stanley No.6 Jack Plane & Record 4 ½ Smoother [Vintage, SOLD]

These pre-owned planes are in good usable condition. Wooden handles, high front knobs. English made. The soles are flat. They would suit for occasional use or as a budget friendly alternative to buying new. In our opinion they are superior to current Stanley and Record models. These probably date from the 80’s. There is plenty of life left in the blades (but you can always upgrade with...

£85.00 inc VAT

Stanley No.71 Router in fitted box – superb condition [Preowned, SOLD]

Stanley No.71 Router in fitted box – superb condition [Preowned, SOLD]

Probably unused. 98% nickel plating remains. 3 cutters: 1/4'' & 1/2'' straight and 1/2'' spear cutter. Correct straight/curved fence. Instruction sheet. Made in England. Fitted box. With additional, owner made, wooden base (not currently fitted so can be dicaared if not of use).

£135.00 inc VAT

Stanley No.71 Router Plane [Pre-owned, SOLD]

Stanley No.71 Router Plane [Pre-owned, SOLD]

The body of this router plane is in as new condition. 3 cutters (which have been cleaned), curved/straight reversible fence. Original cardboard box. This a fairly recent model with black stained beech handles..

£100.00 inc VAT

Stanley No.78 rebate plane [Pre-owned, As New]

A useful and popular rebate plane by Stanley. The blade (cutter) can be placed in two positions: the rear for normal work and the front for bullnose use.. 250mm (approx. 10 inches) long with a 38mm (1.1/2 inch) wide cutter. It has an adjustable, fence for controlling the width of the rebate and a depth gauge (stop) for controlling depth. Includes a nicker (cutting spur) to score wood fibers...

£58.00 inc VAT

Stanley No.79 (ENG) Side Rebate Plane [Pre-owned, SOLD]

Stanley No.79 (ENG) Side Rebate Plane [Pre-owned, SOLD]

Probably unused, in original box this is a pre-owned item in near perfect condition. This 5 1/2" long side rebate plane was designed for cabinet makers to accurately trim dados, grooves, moulds etc. This useful plane has two skewed cutters set at a very low angle. The cutters are set in the plane with their bevel edges facing upwards. Keep these cutters sharp to get the best results. Full...

£48.00 inc VAT

Stanley No.8 Hollow & Round bases with cutters for combination plane [Pre-owned, SOLD]

Stanley No.8 Hollow & Round bases with cutters for combination plane [Pre-owned, SOLD]

These are not so easy to come across in such good condition. Designed to fit the Stanley 45 & 55 Combination planes.

£60.00 inc VAT

Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned, SOLD]

Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned, SOLD]

A recent, used Stanley No.80 Scraper plane with a new Hock replacement iron. The plane is in good order with 100% black japanning and a flat sole for the 2 3/8” sole.

£55.00 inc VAT

Stanley Rule & Level Co. No.113 Compass Plane [Pre-owned, SOLD]

Stanley Rule & Level Co. No.113 Compass Plane [Pre-owned, SOLD]

This is in very good order with original Stanley iron. The sole moves adjust freely. There is a small indent at one edge of the sole (very small indeed but we do try to be very accurate in our descriptions). This indent (1mm) is outside the edge of the planning track and we do not think this would affect performance.

£125.00 inc VAT

Starrett 150mm Dividers [Pre-owned, SOLD]

Starrett 150mm Dividers [Pre-owned, SOLD]

In excellent condition Little used In the original Starrett box Starrett code 277–6

£68.00 inc VAT

Steel Letter Stamps – 3/16” [Pre-owned, SOLD]

Steel Letter Stamps – 3/16” [Pre-owned, SOLD]

In original metal case. Made in England. Crisp! About 2 ½” long.

£25.00 inc VAT

Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]

Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]

11 Toothed Chisels: 10mm wide 3 pointed teeth 15mm wide 4 pointed teeth 20mm wide 5 pointed teeth 25mm wide 6 pointed teeth 30mm wide 7 pointed teeth 35mm wide 8 pointed teeth 40mm wide 9 pointed teeth 45mm wide 10 pointed teeth 50mm wide - 11 pointed teeth 55mm wide - 12 pointed teeth 60mm wide - 13 pointed teeth 270mm overall length. New old stock. Be advised...

£320.00 inc VAT

Stonemasons Firesharp Chisels – 10 widths [Clearance, SOLD]

Stonemasons Firesharp Chisels – 10 widths [Clearance, SOLD]

10 double-hooped strong-as-an-ox stone masonry chisels made in France by Forge de Saint Juery home of Auriou Tool Works. Widths: 10, 15, 25, 30, 35 ,40, 45, 50, 55 & 60mm. 270mm overall length. New old stock. These wooden handled chisels are ideal for softer stone including alabaster, limestone and soapstone. When they are gone, they are gone! 3 sets available – you...

£240.00 inc VAT

Svante Djary 2” 600g Adze [Pre-owned, SOLD]

Svante Djary 2” 600g Adze [Pre-owned, SOLD]

This small adze (which is not unlike the slightly heftier Oscar Rush version) is from Swedish blacksmiths Svante Djarv Hantverk and has the stamp SD in the head. Professionally hand-crafted in Sweden from high carbon steel, this small carving adze has a lovely short, shaped handle allowing for a good, safe grip whilst carving. Designed for shaping the insides of wood carvings, kuksa, bowls and...

£180.00 inc VAT

Swan Neck Lock Mortise Chisel 3/8'' [Preowned, SOLD]

Swan Neck Lock Mortise Chisel 3/8'' [Preowned, SOLD]

14 1/2'' overall with a lovely beech handle. Stamped "I Sorby" on the steel. This hasn't done any work in our opinion and is in G++ condition

£36.00 inc VAT

TASAI Japanese Chisel (24mm) - Damascus Steel (Mokume) & Sandalwood Handle [Preowned, Unused, SOLD]

TASAI Japanese Chisel (24mm) - Damascus Steel (Mokume) & Sandalwood Handle [Preowned, Unused, SOLD]

Blue steel cutting edge made of Tasai special blue steel, a custom made steel for master blacksmith Tasai which is laminated onto the special multi-layer core ''Mokume pattern'' The handle is made of sandalwood (and still has its protective film covering it which we have decided not to remove to allow you the privilege. However the photo will show a glaze rather than the true colour of the handle). We...

£235.00 (VAT exempt)

The Ward Collection – 4 Chisels & A Gouge [Vintage, SOLD]

The Ward Collection – 4 Chisels & A Gouge [Vintage, SOLD]

4 chisels and a magnificent gouge, all by Ward, Sheffield Ward & Payne 1 1/2” wide Firmer Chisel Refurbished 1 ½” wide chisel by Ward & Payne, Sheffield. Attractive London pattern boxwood handle and brass ferrule. Blade is 7” long, 16” overall. 1 ¼” wide bevel edge paring chisel by WARD W & P. Waisted round hardwood...

£125.00 (VAT exempt)

This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]

This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]

This beauty dates from the 2nd World War and was of government issue. The arrow stamped in the blade is the giveaway sign for this. It is 14 1/2" long overall (about 365mm) and 2 1/2" wide (58mm) It has the original very attractive handle which is in great condition. There are many years of use left in this super chisel which tapers along its length from 1/4" to 1/8"...

£65.00 inc VAT

Timber Scribe and Race Knife [Preowned, SOLD]

Timber Scribe and Race Knife [Preowned, SOLD]

Rosewood handled with brass ferrule, this attractive race knife and scribe is unmarked. Original including the wing nut. A lovely vintage tool. Timber scribes were used to mark casks, imported timber, packing crates and trees for felling.

£36.00 inc VAT

Tissington Smoothing Plane [Vintage, Rare]

Tissington Smoothing Plane [Vintage, Rare]

Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

£175.00 inc VAT

Travisher - Hard Maple from The Windsor Workshop [Preowned, SOLD]

Travisher - Hard Maple from The Windsor Workshop [Preowned, SOLD]

Sold

£140.00 (VAT exempt)

Two Jorgensen Adjustable Hand Clamps - 10' & 8 [Preowned, Unused, SOLD]

Sold

£36.00 inc VAT

Ulmia Layout Tools from Germany [Clearance, SOLD]

We bought these in as samples to have a good look alongside the fantastic new range of squares and precision bevels we are now selling from ULMIA . New Ulmia Squares & Bevels Made from white beech these are a throwback to the days of basic wooden measuring tools and they are very nicely made indeed. 15cm square & a 33cm bevel with excellent locking finger nut. New - unused.

£33.00 inc VAT

Union No.42 Tongue & Groove Plane [Preowned, SOLD]

Union No.42 Tongue & Groove Plane [Preowned, SOLD]

A very nice example of the No.42 tongue & groove plane by UNION This dates from about the 1920's This Union No.42, which is similar to the Stanley plane, has a fence that you can swing through 180 degrees. One way for the tongue, then swing it around for the groove. In great order this plane is ready to tongue and to groove. This is a commission sale.

£130.00 (VAT exempt)

Veritas 10'' Sliding Bevel [Pre-owned]

10" version

£85.00 inc VAT

Veritas Custom-made No.4 - Smoothing Plane (with 55 degree and 45 degree frogs) [Preowned, SOLD]

Veritas Custom-made No.4 - Smoothing Plane (with 55 degree and 45 degree frogs) [Preowned, SOLD]

This plane has a fitted 55 degree frog with a 2'' wide PMV11 blade, large rear tote (back handle) and wide front knob. It also has a 45 degree frog should you wish to change your blade angle. Original box and instruction leaflet. Norris style central stainless steel adjusting screw. Lateral setscrews centre the plane blade in the plane mouth The width of mouth opening can be adjusted...

£285.00 (VAT exempt)

Veritas Honing Guide Bundle [Pre-owned]

This bundle includes: The Veritas Mark II Honing Guide with standard clamping head, straight roller base and angle registration jig. This accepts blades between 1/2'' and 2 7/8'' wide and up to 15/32'' thick, including skew blades. It hones bevel angles from 15° to 54° and back bevels from 10° to 20°. Veritas Narrow Blade-Head which accepts blades from...

£120.00 inc VAT

Verum 5 ½ Jack Plane, wheel marking gauge, screwdriver set & marking knife set [Pre-owned, SOLD]

Verum 5 ½ Jack Plane, wheel marking gauge, screwdriver set & marking knife set [Pre-owned, SOLD]

Verum bundle - save yourself £125!

£195.00 inc VAT

Very Attractive Ebony & Brass Cutting Gauge [Vintage, SOLD]

Very Attractive Ebony & Brass Cutting Gauge [Vintage, SOLD]

A very attractive cutting gauge with ebony stem and full brass faced ebony fence. G++ condition. We have given this a very light clean, it will polish beautifully but we like the patina so we haven’t gone to town on this! The locking off screw is housed within a brass brass escutcheon. The cutting knife is held in place with a brass wedge. Very nice to handle, it locks firmly...

£65.00 inc VAT

Vintage Beech & Brass Brace – Lovely Patina [Preowned, SOLD]

Vintage Beech & Brass Brace – Lovely Patina [Preowned, SOLD]

There is no makers mark for this beech hand brass with brass escutcheons. The brass button that releases your bit from the brace is stiff (but you would be after 100 years or so) but it is working and will free up. This brace has a lovely patina. The head rotates freely as it should . The head may be rosewood but years of grubby carpenters hands have deposited blood sweat and tears all over the...

£42.00 inc VAT

Vintage Coopers Inshave - William Graves & Sons - Sheffield [Preowned, SOLD]

Vintage Coopers Inshave - William Graves & Sons - Sheffield [Preowned, SOLD]

Pre Loved

£30.00 inc VAT

Vintage Squares [Preowned, SOLD]

All squared up? A selection of attractive vintage squares – all in G+ - G++ condition They probably aren’t super accurate, but they will be good enough for most DIY tasks should you chose to use them. However, cleaning these up (which we haven’t had time to do) will release the beauty of the wood and make the brass glisten like gold. A little bit of wire wool (medium) some...

£30.00 inc VAT

Category

Collection

Price

Additional Filters

Sort By

Per Page

View