Friday Finds

Rabone & E Preston & Sons - Boxwood & Brass Rules [Preowned, SOLD]

Rabone & E Preston & Sons - Boxwood & Brass Rules [Preowned, SOLD]

3 nice boxwood & brass rules. These are all in good condition. A light clean will dislodge any lingering cosmetic marks. 4'' caliper rule No.1466 - Rabone. 24'' four fold rule - No.1380 - Rabone 48'' four fold rule - No.3276 - E. Prestons & Sons Birmingham

£36.00 inc VAT

Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]

Rabone Chesterman 12' No.1908 Steel Tri Square [Preowned, SOLD]

Pre Loved

£25.00 inc VAT

Record 00 - Vice [Preowned, SOLD]

Pre Loved

Was £42.00 Now £36.00 inc VAT

Record 041 Shoulder Plane (5/8'' Blade) [Preowned, SOLD]

Record 041 Shoulder Plane (5/8'' Blade) [Preowned, SOLD]

This is preowned, has a full blade, and has seen little or no use.

£84.00 inc VAT

Record 043 Plough Plane [Preowned, Unused, SOLD]

Record 043 Plough Plane [Preowned, Unused, SOLD]

This sweet little Record plough plane No. 043 is 140mm (5 1/2'') overall designed for making small rebates and cutting grooves. The 043 has an adjustable depth stop, 2 arms and a bridged fence which can be used on either side of the plane body (for left or right handed use). Original (tatty box). The plane is unused. 3mm, 4.5mm & 6.4mm cosmetically tarnished blades. Commission...

£75.00 (VAT exempt)

Record 077A Bullnose & Chisel Plane [Vintage, SOLD]

Record 077A Bullnose & Chisel Plane [Vintage, SOLD]

This is great alternative to buying a new plane if your budget is constrained. G++ condition, good blade (3/4") remaining. The front nose will detach so you can use this as a chisel plane. The blade is 1 1/8" wide. This excellent site will give you further information

£45.00 inc VAT

Record 311 – Rebate, Chisel & Bullnose Plane [Pre-owned, SOLD]

Record 311 – Rebate, Chisel & Bullnose Plane [Pre-owned, SOLD]

A very good crisp example of this plane which is now made by Thomas Flinn Sheffield under the Clifton Planes (Clifton 3110) brand for £245. Supplied with a well-made fitted case with a sliding lid. 7” overall, 1 1/8” wide blade. It will be difficult to find this plane elsewhere is such good condition.

£155.00 inc VAT

Record 405 Multi-Plane [Preowned, SOLD]

A little used Record 405 in its original box, complete with a full set of cutters and instruction booklet. Here is a great place to look and learn about this plane. Note this plane comes with 23 standard cutters. The plane has a stained beech handle.

£175.00 inc VAT

Record 405 Multiplane [Preowned, SOLD]

This plane has seen very little use at all and presents as almost new. It has its fitted box with wallet containing 24 cutters and instruction booklet. The cutters: 4, 6, 9 & 12mm plus 1/8'', 3/16'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 5/8'', 3/4'' & 7/8'' Plough & Dado cutters. 1/8'',...

£185.00 inc VAT

Record 722 Small Router Plane [Vintage, SOLD]

Record 722 Small Router Plane [Vintage, SOLD]

This webpage will tell you more about this little English router plane: Record 722 Router Plane One 1/4" straight blade. No box.

£36.00 inc VAT

Record 778 Rebate & Fillester Plane [Preowned, Unused, SOLD]

Record 778 Rebate & Fillester Plane [Preowned, Unused, SOLD]

Unused in original packaging. No. 778 plane has two positions for the cutter — one for ordinary work, and the other for bull-nose work. It is fitted with a hardened steel spur, an adjustable depth gauge which is removable, and an adjustable fence which can be used on either side of the plane. This plane is adaptable for many other purposes besides rabbeting when the fence and arms are...

£72.00 inc VAT

Record Calvert Stephens - CS88 Bench Plane [Preowned, SOLD]

Record Calvert Stephens - CS88 Bench Plane [Preowned, SOLD]

This is a commission sale on behalf of a customer. This limited edition plane was made by Record Tools. The excellent reference site dedicated to Record Tools is the best place to discover more information on all matters Record including detailed information about this plane (although the prices they quote are 17 years out of date!). Information on the Record No. CS88 Calvert Stevens Smooth...

£325.00 (VAT exempt)

Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]

Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]

In mint condition. This is a commission sale for a perfectly looked after unused plane. Quite a few of these planes, whether Stanley or Record are in circulation on Ebay and the like, but the buyer must be very wary as often these planes have had a hard life, particularly the vintage planes (the rivets on the sole near the mouth loosen and cracks can develop in the castings). No such fears here...

£185.00 (VAT exempt)

Record Imp No. 80 Vice [Preowned, SOLD]

Smooth working vice with anvil. This is a genuinely good and original example of this handy little beastie. It is designed to clamp to your workbench and has 2 1/4'' jaws that open to about 2 3/4''.

£42.00 inc VAT

Record Imp No. 80 Vice [Preowned, SOLD]

Smooth working vice with anvil. This is a genuinely good and original example of this handy little beastie. We sold one just like it a couple of weeks ago and this is as good as that one. It is designed to clamp to your workbench and has 2 1/4'' jaws that open to about 2 3/4''.

£36.00 inc VAT

Record No.50 Combination Plane [Preowned, Unused, SOLD]

Record No.50 Combination Plane [Preowned, Unused, SOLD]

This is in super unused condition with the instruction booklet. The box is a bit tatty with a torn lid but the plane is in fine condition with all the bits n pieces, cutters etc all present and very correct. Pre-owned, commission sale.

£150.00 (VAT exempt)

Record No.7 Jointer Plane (with Clifton Hand forged blade & 2 piece cap iron) [Preowned, SOLD]

Record No.7 Jointer Plane (with Clifton Hand forged blade & 2 piece cap iron) [Preowned, SOLD]

Pre-owned but in superb condition this plane has the considerable advantage of having been fitted with a Clifton hand forged blade and 2 piece cap iron. This plane has done very little planing. 21” overall with 2 3/8” wide blade. Stained beech handles. This plane is quite recent. Made in England.

£115.00 inc VAT

Record Technical Jack Plane - T5 [Preowned, SOLD]

Record Technical Jack Plane - T5 [Preowned, SOLD]

Missing the side handle. This plane benefits from a Clifton hand forged 2'' wide blade. Read all about it here.. In good working condition.

£64.00 inc VAT

Richard Kell Large Honing Guide (up to 2 5/8'') [Pre-owned, SOLD]

Richard Kell Large Honing Guide (up to 2 5/8'') [Pre-owned, SOLD]

Please note: you have 15 minutes to complete checkout with this Friday Finds item. Thank you.

£36.00 inc VAT

Richard Kell Wonder Bundle [Preowned, SOLD]

Richard Kell Wonder Bundle [Preowned, SOLD]

Sold

£100.00 inc VAT

Rider Shooting Board [Pre-owned, SOLD]

The Rider Shooting Board is made from stable 20mm thick phenolic sheet with a hardwood fence and stainless hardware. The durable phenolic board is lightweight, it will not warp or twist, is water resistant and reduces friction. It is 500mm x 200mm with a 64mm wide track for your plane. The fence can be fitted at either end of the board allowing it to be used right or left-handed. The centre of the...

£44.00 inc VAT

Rob Cosman Dovetail Marking Knife & Dovetail Marker [Preowned, SOLD]

Rob Cosman Dovetail Marking Knife & Dovetail Marker [Preowned, SOLD]

It doesn’t look like this pre-owned marking knife has done much marking out as it presents in Good++(G++) to Fine (F) condition in original packaging. The dovetail marker (1:7 & 1:6) has been used. This dovetail marking knife took Rob Cosman several years to design and perfect. Hand-cut dovetailing is Rob's specialism, and he has no doubt this tool is a great asset to those of you...

£58.00 inc VAT

Robert Sorby Sovereign Ultima Hollowing System – Unhandled Medium 18'' [Clearance, SOLD]

This is a new tool in that it is Classic Hand Tools’ unsold stock (we are having a summer spring clean!). The video shows you all you need to know but this description may also help. Medium Ultima Unhandled (SOV-RSULTM) A part of Robert Sorby Sovereign System but is also a stand-alone tool when installed in Sovereign handle. The Ultima Blade enables woodturners to produce hollow forms...

£165.00 inc VAT

Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance]

New This system (RSTM-SCT3) comes with the carbide square cutter plus the following titanium nitride cutters RSTM-GT2 Excelsior Detail Point Cutter RSTM-GT4 Excelsior French Curve Cutter RSTM-GT6 Excelsior Teardrop Inside/Outside Cutter RSTM-GT7 Excelsior Mushroom Cutter

£115.00 inc VAT

Robert Sorby TURNMASTER Woodturning System (with HSS cutters) [Clearance]

New - just having a good old clean out and this is a bit of a bargain for woodturners This Robery Sorby system (RSTM-SCT2) comes with the carbide detail point cutter plus the following High Speed Steel Cutters RSTM-TIP3 HSS Square Cutter RSTM-TIP4 HSS French Curve Cutter RSTM-TIP5 HSS Dovetail/Box Cutter RSTM-TIP6 HSS Teardrop Inside/Outside Cutter RSTM-TIP7 HSS Mushroom Cutter And...

£115.00 inc VAT

Robert Sorby TURNMASTER Woodturning System [Clearance, SOLD]

New "old" tool that we are clearing from our stock due to a summer stock clean. This system (RSTM-SCT3) comes with the single carbide square cutter only. Some more info here from Robert Sorby

£75.00 inc VAT

Saddlers Round Knife - C S Osborne & Co. Newark N.J [Preowned, SOLD]

Saddlers Round Knife - C S Osborne & Co. Newark N.J [Preowned, SOLD]

This is a lovely vintage Saddlers round knife from the USA manufacturer CS Osborne. It is difficult to date but from its form and simplistic beauty we hazard a guess that it is an early one dating as far back as the 19th Century.The blade has a lovely ring to it when flicked by a finger. It is marked ''C S Osborne & Co. Newark N.J Made in USA'' on the blade. It is also marked...

£50.00 inc VAT

Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]

Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned]

This is old stock from the early days of starting up Classic Hand Tools. Sanderson Hardware are still going in California. (Note - these cotter pins are different to what they offer now). The diameter of the ring pull is 3/4". The rod stock is 1/8" diameter and 2 1/4” ong . The square plate is ¾” x 5/8” with 4 screw holes (screws provided). The plate has...

£10.00 inc VAT

Sash Pocket Chisel [Vintage, SOLD]

10 ½" overall, 1 1/2" wide, with 3 1/2" long blade. Original handle with brass ferrule and leather washer. Sash pocket chisels are medium length chisels designed to cut the 'pocket piece' in the side of the frame of a sash sliding window. This pocket piece is the removeable wooden 'window' to enable access into the space at each side of sash windows where...

£28.00 inc VAT

Set of 10 Marples Bevel Edge chisels [Preowned, SOLD]

Set of 10 Marples Bevel Edge chisels [Preowned, SOLD]

These have been very little used and show no sign of wear. The original grinding marks are still on show. The set graduates from 1/8" through to 2" as follows. 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2" & 2" Most of them have their edge guards. Brass ferrules (one has split) Boxwood handles. Commission sale.

£245.00 (VAT exempt)

Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New, SOLD]

Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New, SOLD]

Still in their original wrapping, this set comprises of 12 bevel edge chisels from the brand IYOROI in linen roll. 223mm in overall length. Red oak handles. Black finish to the blades with polished hollows. Black finish to striking hoops. Hollow ground backs with single flutes for all widths. Widths are as follows: 1.5, 3, 6, 9, 12,15,18, 21, 24, 30, 36 & 42mm. Denim tool...

£395.00 (VAT exempt)

Set of 4 Butt Chisels - Pfeil Swiss Made [Preowned, SOLD]

Set of 4 Butt Chisels - Pfeil Swiss Made [Preowned, SOLD]

Set of 4 Butt Chisels - Pfeil Swiss Made Pre-owned but these look unused. Slight staining to the plum wood handles. 6mm, 12mm, 19mm & 25mm 155mm overall length including handle. The 4 chisels come with a wooden storage block.

£65.00 inc VAT

Set of 4 Glen-Drake Chisel Hammers - Long Handled [Preowned, Unused, SOLD]

Set of 4 Glen-Drake Chisel Hammers - Long Handled [Preowned, Unused, SOLD]

Pre Loved

£265.00 inc VAT

Set of 4 Glen-Drake Chisel Hammers - Short Handled [Preowned, Unused, SOLD]

Set of 4 Glen-Drake Chisel Hammers - Short Handled [Preowned, Unused, SOLD]

Pre Loved

Was £280.00 Now £268.00 inc VAT

Set of 4 Odate Crowning Plates & an Odate Dressing Plate [Preowned, SOLD]

Set of 4 Odate Crowning Plates & an Odate Dressing Plate [Preowned, SOLD]

This set of plates is from David Charlesworth workshop in North Devon at Hartland, Devon, England (see the new film featuring Gillian Anderson & Jason Isaacs called THE SALT PATH for an idea of where David lived if you have never been to Hartland). So, David will have used these (probably for testing and review for an article). The plates have not been heavily used in our opinion but are pre-owned...

£385.00 inc VAT

Set of 4 Pfeil Sculpture Carving Knives in Roll [Pre-owned, As New, SOLD]

Set of 4 Pfeil Sculpture Carving Knives in Roll [Pre-owned, As New, SOLD]

A Set of 4 Swiss made carving tools in a canvas tool roll. Plum handles. Unused knives that have been sharpened. The Pfeil Sculpture Carving Knives are a set of 4 carving knives in a quality tool roll: Large Schaller knife Small Schaller knife Large Canard knife Small Canard knife Pfeil Schaller knives have a crowned blade. The back is also rounded so it does not touch the work....

£95.00 (VAT exempt)

Set of 5 Paring Chisels – Henry Taylor (Diamic) [Pre-owned]

Set of 5 Paring Chisels – Henry Taylor (Diamic) [Pre-owned]

Made in Sheffield England these paring chisels are 12 1/2” – 15” long (315mm- 370mm) overall with a blade length of about & ½” (190mm). 1/4”, 1/2”, 3/4”, 1” & 1 1/4” wide Condition report – Good + This is a good, graduated set of Sheffield made paring chisels with the marks of use and age (maybe 20+ years old). They...

£100.00 inc VAT

Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New, SOLD]

Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New, SOLD]

This is a great value buy. These Henry Taylor incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. This set comprises the following gouges (if bought new from our site they would cost you £214) F11...

£164.00 (VAT exempt)

Set of 7 - Clifton Anniversary Planes [Preowned, Unused, SOLD]

Set of 7 - Clifton Anniversary Planes [Preowned, Unused, SOLD]

A wonderful set of 7 Limited Edition Clifton Anniversary Planes 2010. One of 12 full sets known to have been sold from this Sheffield planemaker. (Note - Classic Hand Tools sold the vast majority of the planes when they were launched as a limited edition, so we are very confident of our numbers). You are buying a small slice of the long history of toolmaking in Sheffield, England. This...

£3,475.00 (VAT exempt)

SEVEN Henry Taylor Straight Fishtail Gouges [Clearance, SOLD]

SEVEN Henry Taylor Straight Fishtail Gouges [Clearance, SOLD]

New current stock. A fishtail bundle! Ok – so this is excess stock created through our enthusiasm to promote this great British brand a few years back. We still love these Henry Taylor carving tools but when HT slimmed down their overall offering, we were holding quite a lot (hundreds!) of carving tools. At that point we decided to concentrate our future investment in woodcarving hand tools...

£138.00 inc VAT

Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New, SOLD]

Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New, SOLD]

Unused, as new. White paper tool steel and high carbon steel laminated blade with red oak handle and steel striking hoop. 240mm overall. 60mm blade. White paper steel (Shirogami in Japanese) is a carbon tool steel that is ideally suited to the production of chisels. It exhibits superior durability when compared to alloyed blue paper steels. Widely available in the UK for about £70...

£53.00 (VAT exempt)

Simon James 19mm Holdfasts (Pair) [Preowned, Unused, SOLD]

Simon James 19mm Holdfasts (Pair) [Preowned, Unused, SOLD]

Pre-owned but unused. Superficial scratching but otherwise absolutely fit for purpose. This is the description from our main site when the pair are sold for £59 "Handmade, using traditional methods and a small forge by experienced craftsmen as a cottage industry. They are not mass produced so everyone has very slight differences, which is what you expect with handmade workmanship. They are all...

£48.00 inc VAT

Small Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Small Carving Mallet - Brass Head - Swiss Made [Preowned, SOLD]

Pre Loved

£36.00 inc VAT

Sorby Lock Mortise Chisel [Preowned, SOLD]

Sorby Lock Mortise Chisel [Preowned, SOLD]

A handsome lock mortise chisel. 18” overall including a stubby 3'' oak handle. 1/2'' wide. Owners stamp - "C GIBSON" This beast will clean up very well.

£25.00 inc VAT

Stanley 271 - Small Router Plane [Preowned, SOLD]

Stanley 271 - Small Router Plane [Preowned, SOLD]

A little used Stanley 271 small router plane Marked 'STANLEY No.271 MADE IN ENG' on the body of the plane. 1/4'' cutter which can be mounted for use as either an open or closed throat router. 3'' x 2'' overall. In original orange box with instruction leaflet.

£36.00 inc VAT

Stanley 444 Dovetail Tongue & Groove Plane [Preowned, Professionally Restored, SOLD]

Stanley 444 Dovetail Tongue & Groove Plane [Preowned, Professionally Restored, SOLD]

This is a rare beast. This example has been professionally re-nickel plated and 4 new blades have been made to complete the plane. This plane was designed for the precision planing of dovetail joints. The STANLEY 444 Dovetail plane was manufactured between 1912 and 1938 so it is very rare to find something so old in mint condition as the nickel plating always deteriorates over time if the...

£750.00 (VAT exempt)

Stanley 90 Bullnose Plane [Preowned, SOLD]

Stanley 90 Bullnose Plane [Preowned, SOLD]

Pre Loved

£48.00 inc VAT

Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]

Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]

This plane has seen good service for many decades and remains in good condition. The original Stanley Sweetheart blade has worn down to the last 3/4'' so we have fitted a 2 3/8'' HOCK A2 cyro replacement iron for you (the original iron will also come with the plane) Patent dates of MAR 25 - 02 AUG 19- 02 APR 19 – 10 Lovely rosewood handles.

£125.00 inc VAT

Category

Collection

Price

Additional Filters

Sort By

Per Page

View