Category
Collection
Price
Additional Filters
510 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Stanley No.18 steel bevel - The Eureka [Preowned, SOLD]Stanley No.18 steel bevel - The Eureka [Preowned, SOLD]
Sold
Stanley No.18 steel bevel - The Eureka [Preowned, SOLD]
Pre Loved
Was £72.00 Now £66.00 inc VAT
Stanley No.5 1/2 Jack Plane [Preowned, SOLD]Stanley No.5 1/2 Jack Plane [Preowned, SOLD]
Sold
Stanley No.5 1/2 Jack Plane [Preowned, SOLD]
Pre-owned in G++ condition. Attractive rosewood handles. A good user plane that has been well looked after. A commission sale.
£75.00 (VAT exempt)
Stanley No.50 Combination Plane [Preowned, Unused, SOLD]Stanley No.50 Combination Plane [Preowned, Unused, SOLD]
Sold
Stanley No.50 Combination Plane [Preowned, Unused, SOLD]
It is quite easy to find this plane on reselling sites like Ebay etc. However, unlike many of the examples on those sites, this Stanley No.50 Combination plane is in unused, "as new" condition, in its original box (this has been drawn on in felt tip pen), with instruction leaflet, with the 17 cutters in the wooden cutter holder, has both spurs and the nickel plating is 95+ untarnished. 9 plough/dado...
£135.00 (VAT exempt)
Stanley No.71 Router in fitted box – superb condition [Preowned, SOLD]Stanley No.71 Router in fitted box – superb condition [Preowned, SOLD]
Sold
Stanley No.71 Router in fitted box – superb condition [Preowned, SOLD]
Probably unused. 98% nickel plating remains. 3 cutters: 1/4'' & 1/2'' straight and 1/2'' spear cutter. Correct straight/curved fence. Instruction sheet. Made in England. Fitted box. With additional, owner made, wooden base (not currently fitted so can be dicaared if not of use).
£135.00 inc VAT
Stanley No.79 (ENG) Side Rebate Plane [Pre-owned, SOLD]Stanley No.79 (ENG) Side Rebate Plane [Pre-owned, SOLD]
Sold
Stanley No.79 (ENG) Side Rebate Plane [Pre-owned, SOLD]
Probably unused, in original box this is a pre-owned item in near perfect condition. This 5 1/2" long side rebate plane was designed for cabinet makers to accurately trim dados, grooves, moulds etc. This useful plane has two skewed cutters set at a very low angle. The cutters are set in the plane with their bevel edges facing upwards. Keep these cutters sharp to get the best results. Full...
£48.00 inc VAT
Starrett 150mm Dividers [Pre-owned, SOLD]Starrett 150mm Dividers [Pre-owned, SOLD]
Sold
Starrett 150mm Dividers [Pre-owned, SOLD]
In excellent condition Little used In the original Starrett box Starrett code 277–6
£68.00 inc VAT
Sterling Toolworks - Plane Adjusting Hammer [Preowned, SOLD]Sterling Toolworks - Plane Adjusting Hammer [Preowned, SOLD]
Sold
Sterling Toolworks - Plane Adjusting Hammer [Preowned, SOLD]
This is a commission sale. Pre-owned but hardly used in G++ condition. Note - this hammer comes with a spare "spud" in a Sterling Toolworks branded bag. This is what we say about the hammer on our website, where it sells new for £175: "The Sterling Tool Works Plane Adjustment Hammer is designed to be used to adjust plane blades and wooden plane wedges for wooden hand...
£125.00 (VAT exempt)
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
Revised
Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]
11 Toothed Chisels: 10mm wide 3 pointed teeth 15mm wide 4 pointed teeth 20mm wide 5 pointed teeth 25mm wide 6 pointed teeth 30mm wide 7 pointed teeth 35mm wide 8 pointed teeth 40mm wide 9 pointed teeth 45mm wide 10 pointed teeth 50mm wide - 11 pointed teeth 55mm wide - 11 pointed teeth 60mm wide - 13 pointed teeth 270mm overall length. New old stock. Be advised...
£320.00 inc VAT
Stonemasons Firesharp Chisels – 10 widths [Clearance]Stonemasons Firesharp Chisels – 10 widths [Clearance]
Revised
Stonemasons Firesharp Chisels – 10 widths [Clearance]
10 double-hooped strong-as-an-ox stone masonry chisels made in France by Forge de Saint Juery home of Auriou Tool Works. Widths: 10, 15, 25, 30, 35 ,40, 45, 50, 55 & 60mm. 270mm overall length. New old stock. These wooden handled chisels are ideal for softer stone including alabaster, limestone and soapstone. When they are gone, they are gone! 3 sets available – you...
£240.00 inc VAT
Swan Neck Lock Mortise Chisel 3/8'' [Preowned, SOLD]Swan Neck Lock Mortise Chisel 3/8'' [Preowned, SOLD]
Sold
Swan Neck Lock Mortise Chisel 3/8'' [Preowned, SOLD]
14 1/2'' overall with a lovely beech handle. Stamped "I Sorby" on the steel. This hasn't done any work in our opinion and is in G++ condition
£36.00 inc VAT
Tapered Carcass Saw – 14 ppi – Cross Cut - Lie Nielsen Toolworks [Preowned, SOLD]Tapered Carcass Saw – 14 ppi – Cross Cut - Lie Nielsen Toolworks [Preowned, SOLD]
Sold
Tapered Carcass Saw – 14 ppi – Cross Cut - Lie Nielsen Toolworks [Preowned, SOLD]
Pre-owned 14” tapered carcass saw – 14 ppi made in 2014. This saw has a very attractive maple handle. The saw blade tapers from 2" to 2 1/4" over its 14"length. In excellent condition, with original box
£154.00 inc VAT
TASAI Japanese Chisel (24mm) - Damascus Steel (Mokume) & Sandalwood Handle [Preowned, Unused, SOLD]TASAI Japanese Chisel (24mm) - Damascus Steel (Mokume) & Sandalwood Handle [Preowned, Unused, SOLD]
Sold
TASAI Japanese Chisel (24mm) - Damascus Steel (Mokume) & Sandalwood Handle [Preowned, Unused, SOLD]
Blue steel cutting edge made of Tasai special blue steel, a custom made steel for master blacksmith Tasai which is laminated onto the special multi-layer core ''Mokume pattern'' The handle is made of sandalwood (and still has its protective film covering it which we have decided not to remove to allow you the privilege. However the photo will show a glaze rather than the true colour of the handle). We...
£235.00 (VAT exempt)
This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]
Sold
This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]
This beauty dates from the 2nd World War and was of government issue. The arrow stamped in the blade is the giveaway sign for this. It is 14 1/2" long overall (about 365mm) and 2 1/2" wide (58mm) It has the original very attractive handle which is in great condition. There are many years of use left in this super chisel which tapers along its length from 1/4" to 1/8"...
£65.00 inc VAT
Thomas Flinn Pax 1776 - Cross Cut Saw [Preowned, Unused, SOLD]Thomas Flinn Pax 1776 - Cross Cut Saw [Preowned, Unused, SOLD]
Sold
Thomas Flinn Pax 1776 - Cross Cut Saw [Preowned, Unused, SOLD]
15tpi Unused in original packaging. The saw has 2 minor blemishes on the saw plate. One is near the brass back. The second is 13mm from the cutting teeth - i.e years of sawing before that would ever become an issue. Each blemish is no more than 5mm x 5mm They detract a little from the saw's appearance but not its functionality. Attractive open walnut handle with inset Thomas Flinn PAX...
£120.00 (VAT exempt)
Timber Scribe and Race Knife [Preowned, SOLD]Timber Scribe and Race Knife [Preowned, SOLD]
Sold
Timber Scribe and Race Knife [Preowned, SOLD]
Rosewood handled with brass ferrule, this attractive race knife and scribe is unmarked. Original including the wing nut. A lovely vintage tool. Timber scribes were used to mark casks, imported timber, packing crates and trees for felling.
£36.00 inc VAT
Tite Mark Glen-Drake Standard Marking Gauge [Preowned, SOLD]Tite Mark Glen-Drake Standard Marking Gauge [Preowned, SOLD]
Sold
Tite Mark Glen-Drake Standard Marking Gauge [Preowned, SOLD]
Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark Standard...
£95.00 inc VAT
Tite Mark Long Marking Gauge [Preowned, SOLD]Tite Mark Long Marking Gauge [Preowned, SOLD]
Sold
Tite Mark Long Marking Gauge [Preowned, SOLD]
Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with a brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark...
£100.00 inc VAT
Tite-Mark Glen-Drake Mini Marking Gauge (with marking and mortise blade sets) [Preowned, SOLD]Tite-Mark Glen-Drake Mini Marking Gauge (with marking and mortise blade sets) [Preowned, SOLD]
Sold
Tite-Mark Glen-Drake Mini Marking Gauge (with marking and mortise blade sets) [Preowned, SOLD]
Pre-owned in very good condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks (both from the USA). NOTE - This mini tite-mark marking gauge is no longer in production. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with a brass body and fixed circular A2 blade hardened...
£115.00 inc VAT
Tite-Mark LONG – Glen Drake / Lie-Nielsen Toolworks [Preowned, SOLD]Tite-Mark LONG – Glen Drake / Lie-Nielsen Toolworks [Preowned, SOLD]
Sold
Tite-Mark LONG – Glen Drake / Lie-Nielsen Toolworks [Preowned, SOLD]
Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with a brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark...
£95.00 inc VAT
Tite-Mark Standard [Preowned, SOLD]Tite-Mark Standard [Preowned, SOLD]
Sold
Tite-Mark Standard [Preowned, SOLD]
Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark...
£85.00 inc VAT
Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned, SOLD]Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned, SOLD]
Sold
Toothing blade for a Lie-Nielsen No.62 Low Angle Jack Plane [Preowned, SOLD]
Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane. Toothed blades have small chisel-like teeth .030'' (.762mm) wide and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set smoothing plane ideally purchased through Classic Hand Tools. The blade comes with a 25° flat ground bevel; it sits in the tool at...
£60.00 (VAT exempt)
Tormek Drill Bit Sharpening Attachment [Preowned, As New, SOLD]Tormek Drill Bit Sharpening Attachment [Preowned, As New, SOLD]
Sold
Tormek Drill Bit Sharpening Attachment [Preowned, As New, SOLD]
Pre-owned - unused, as new. This is a commission sale. With the Tormek Drill Bits Sharpening Attachment you can sharpen your drill bits (3-22mm) with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape. See the video on the...
£215.00 (VAT exempt)
Traditional Turning Saw - Thomas Flinn, Sheffield [Clearance, SOLD]Traditional Turning Saw - Thomas Flinn, Sheffield [Clearance, SOLD]
Sold
Traditional Turning Saw - Thomas Flinn, Sheffield [Clearance, SOLD]
New stock, never used. This saw has a 12? (300mm) blade that is used for sawing straight or curved cuts in thin sections of wood. The blade sits in an "H" shaped wooden frame (consisting of 2 cheeks and a stretcher) and is held under tension by the string which, by winding a clacker (a short wooden stick) increases the tension on the blade. The turned handles with brass ferrules have...
£72.00 inc VAT
Travisher - Hard Maple from The Windsor Workshop [Preowned, SOLD]Travisher - Hard Maple from The Windsor Workshop [Preowned, SOLD]
Sold
Travisher - Hard Maple from The Windsor Workshop [Preowned, SOLD]
Sold
£140.00 (VAT exempt)
Two Jorgensen Adjustable Hand Clamps - 10' & 8 [Preowned, Unused, SOLD]Two Jorgensen Adjustable Hand Clamps - 10' & 8 [Preowned, Unused, SOLD]
Sold
Two Jorgensen Adjustable Hand Clamps - 10' & 8 [Preowned, Unused, SOLD]
Sold
£36.00 inc VAT
Ulmia Layout Tools from Germany [Clearance, SOLD]Ulmia Layout Tools from Germany [Clearance, SOLD]
Sold
Ulmia Layout Tools from Germany [Clearance, SOLD]
We bought these in as samples to have a good look alongside the fantastic new range of squares and precision bevels we are now selling from ULMIA . New Ulmia Squares & Bevels Made from white beech these are a throwback to the days of basic wooden measuring tools and they are very nicely made indeed. 15cm square & a 33cm bevel with excellent locking finger nut. New - unused.
£33.00 inc VAT
Union No.42 Tongue & Groove Plane [Preowned, SOLD]Union No.42 Tongue & Groove Plane [Preowned, SOLD]
Sold
Union No.42 Tongue & Groove Plane [Preowned, SOLD]
A very nice example of the No.42 tongue & groove plane by UNION This dates from about the 1920's This Union No.42, which is similar to the Stanley plane, has a fence that you can swing through 180 degrees. One way for the tongue, then swing it around for the groove. In great order this plane is ready to tongue and to groove. This is a commission sale.
£130.00 (VAT exempt)
Veritas - Edge Trimming Plane (Left Hand) [Preowned, SOLD]Veritas - Edge Trimming Plane (Left Hand) [Preowned, SOLD]
Sold
Veritas - Edge Trimming Plane (Left Hand) [Preowned, SOLD]
Pre-owned, a commission sale. This is what we and Lee Valley Tools say about the edge trimming plane "Edge-trimming planes are used for final trimming cuts on jointed boards to ensure smooth edges at exactly 90° to the face, and for working end grain. In many instances you will need only one model; the appropriate choice is often based on which of your hands is dominant. However, neither...

5

£135.00 (VAT exempt)
Veritas - Mark II Deluxe Honing Guide Set [Preowned, SOLD]Veritas - Mark II Deluxe Honing Guide Set [Preowned, SOLD]
Sold
Veritas - Mark II Deluxe Honing Guide Set [Preowned, SOLD]
Pre-owned but seemingly unused. This is a commission sale on behalf of a customer. This is what Classic Hand Tools say about this set on our website .. ''The key to consistent and fast honing is repeatability - and this guide delivers it in spades. Whether you're a sharpening veteran or just starting out, this versatile guide lets you concentrate on sharpening without worrying...
£100.00 (VAT exempt)
Veritas - Medium Shoulder Plane [Preowned, SOLD]Veritas - Medium Shoulder Plane [Preowned, SOLD]
Sold
Veritas - Medium Shoulder Plane [Preowned, SOLD]
Pre-owned - a commission sale on behalf of our customer. A few superficial scuff marks/scratches but this plane has been used quite infrequently and is in G++ condition with a full O1 iron. Original box. Selling on our main site for £219 ''The shoulder plane (a specialized rebate plane) is the ultimate tool for trimming a joint to a perfect fit. There is no better plane for...
£175.00 (VAT exempt)
Veritas - Richard Wile Plane Hammer [Pre-owned, SOLD]Veritas - Richard Wile Plane Hammer [Pre-owned, SOLD]
Sold
Veritas - Richard Wile Plane Hammer [Pre-owned, SOLD]
This is the description from our main site: “Making fine adjustments to plane-blade position is easier with the right tool, and few can compare to the finely made plane hammers of Richard Wile, a hobbyist woodworker from Nova Scotia. Based on Wile's design, this hammer is machined in our shop to have the same elegant proportions as the original, giving it a weight and balance that feel...
£36.00 inc VAT
Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned, SOLD]Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned, SOLD]
Sold
Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned, SOLD]
Pre-owned – a commission sale 4, 5, 6, 7 ,8 & 10mm blades come with this plane which has been lightly used. Original packaging (the box is a bit tatty) and Instruction booklet. The condition of the plane and blades is Good ++ (G++) which indicates it is not new, but has been well cared for and has no defects over and above superficial cosmetic blemishes. “Closest in size...
£230.00 inc VAT
Veritas - Small Shoulder Plane - A' Blade [Preowned, SOLD]Veritas - Small Shoulder Plane - A' Blade [Preowned, SOLD]
Sold
Veritas - Small Shoulder Plane - A' Blade [Preowned, SOLD]
Pre-owned, a commission sale. This is what we and Lee Valley Tools say about the small shoulder plane... "Designed to seat nicely in the hand, the smallest Veritas shoulder plane is easily controlled using a one-handed grip. The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest...
£165.00 (VAT exempt)
Veritas 3 Saw Bundle [Pre-owned, SOLD]Veritas 3 Saw Bundle [Pre-owned, SOLD]
Sold
Veritas 3 Saw Bundle [Pre-owned, SOLD]
3 Veritas saws - A fine-tooth dovetail saw, a small X-Cut saw & a double edged flush cutting saw
£105.00 inc VAT
Veritas 5/16' & 9/16' mini tenon cutters [Preowned, SOLD]Veritas 5/16' & 9/16' mini tenon cutters [Preowned, SOLD]
Sold
Veritas 5/16' & 9/16' mini tenon cutters [Preowned, SOLD]
Sold
£66.00 inc VAT
Veritas 5/8' Power tenon cutter [Preowned, SOLD]Veritas 5/8' Power tenon cutter [Preowned, SOLD]
Sold
Veritas 5/8' Power tenon cutter [Preowned, SOLD]
Sold
£60.00 inc VAT
Veritas 7/8' Power tenon cutter [Preowned, SOLD]Veritas 7/8' Power tenon cutter [Preowned, SOLD]
Sold
Veritas 7/8' Power tenon cutter [Preowned, SOLD]
Sold
£66.00 inc VAT
Veritas Bevel Up Jointer plane (with PV11 Blade) [Preowned, SOLD]
Sold
Veritas Bevel Up Jointer plane (with PV11 Blade) [Preowned, SOLD]
Pre-owned - this is a commission sale. Originally intended for use in making a bench, our customer decided to buy a bench instead so this plane hasn't seen very much work at all. It comes in its original packaging with the instruction booklet. It is in excellent condition. The sole has only cosmetic wear marks. This is what we say about this plane on our website where it retails for £369 "The Veritas...
£325.00 (VAT exempt)
Veritas Bevel-Up Smoothing Plane with A2 Blade 3401 [Pre-owned, SOLD]Veritas Bevel-Up Smoothing Plane with A2 Blade 3401 [Pre-owned, SOLD]
Sold
Veritas Bevel-Up Smoothing Plane with A2 Blade 3401 [Pre-owned, SOLD]
In Good ++ (G++) condition with superficial scratch marks consistent with light use, this plane has been well cared for. The A2 iron pre-dates the PMV-11 blades that tend to be supplied with more recent models. Supplied in original packaging and with a Veritas plane sock. This is a very useful plane for working difficult grain. It is quite heavy with an adjustable mouth that can be closed to...
£195.00 inc VAT
Veritas Box Makers Plough Plane (Right Hand) [Preowned, SOLD]Veritas Box Makers Plough Plane (Right Hand) [Preowned, SOLD]
Sold
Veritas Box Makers Plough Plane (Right Hand) [Preowned, SOLD]
Used sparingly. This plane is based upon the Record 043 Plough Plane which was produced during the heydays of British manufacturing. An ideal tool for making grooves in boxes and small drawers, this compact plough plane excels at precise grooving and beading applications on small workpieces. 5 1/2" (140mm) long cast-iron body and weighing just 1 lb 7 oz (650 grams), it is highly manoeuvrable...
£110.00 inc VAT
Veritas Bullnose Plane [Preowned, Unused, SOLD]Veritas Bullnose Plane [Preowned, Unused, SOLD]
Sold
Veritas Bullnose Plane [Preowned, Unused, SOLD]
Pre-owned but unused. This is what we say about it on our main site where this exact tool is available for £233 inc VAT "The Veritas® bullnose shoulder plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you'll ever own. Designed for maximum versatility, it performs as either a bullnose or a chisel plane as required. Simply loosen the brass toe-locking...
£155.00 inc VAT
Veritas Bullnose Shoulder Plane (with PMV11 blade) [Preowned, Unused, SOLD]Veritas Bullnose Shoulder Plane (with PMV11 blade) [Preowned, Unused, SOLD]
Sold
Veritas Bullnose Shoulder Plane (with PMV11 blade) [Preowned, Unused, SOLD]
Pre-owned, but unused in original box with instructions. The plane has a minor tarnish on one side face which we have cleaned. This is what we say about the plane on our main site where this exact tool is available for £233 inc VAT ''The Veritas® bullnose shoulder plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you'll...
£175.00 (VAT exempt)
Veritas Carvers Drawknife (with PM V-11 blade) [Pre-owned, SOLD]Veritas Carvers Drawknife (with PM V-11 blade) [Pre-owned, SOLD]
Sold
Veritas Carvers Drawknife (with PM V-11 blade) [Pre-owned, SOLD]
An ordinary drawknife is too large for most carving - the Veritas drawknife is designed for ease of use with maximum control. The teardrop-shaped handles are cocked at 45° to the blade and nestle comfortably in your hands. The polished 4" x 1/8" x 3/4" blade is ground and honed to a perfect edge and is supplied with a blade guard. The drawknife blade is custom made for Veritas...
£85.00 (VAT exempt)
Veritas Carvers Vice [Preowned, SOLD]Veritas Carvers Vice [Preowned, SOLD]
Sold
Veritas Carvers Vice [Preowned, SOLD]
Pre-owned. We have given this a little clean and it is in perfect working order. For use on benches/work surfaces from 16mm - 100mm (5/8'' to 4'') thick. You can read a full description here It comes with the 3 1/2'' dia. by 1/2'' thick mounting plate with steel rod as photographed.
£100.00 inc VAT
Veritas Carving Vice with Doghole Mount Assembly and Carver's Screw [Pre-owned, As New, SOLD]
Sold
Veritas Carving Vice with Doghole Mount Assembly and Carver's Screw [Pre-owned, As New, SOLD]
Veritas’ popular vice with the Doghole Mount Assembly and Carver's Screw. A good carver's vice should be adjustable in all three axes. This one has full rotation in two axes and 3" of height adjustment in the third axis. But more important, it has controlled release; when you relieve the clamping pressure, a combination of internal springs and O-rings provides residual resistance...
£135.00 (VAT exempt)
Veritas Cast Iron Scratch Stock [Pre-owned, As New, SOLD]Veritas Cast Iron Scratch Stock [Pre-owned, As New, SOLD]
Sold
Veritas Cast Iron Scratch Stock [Pre-owned, As New, SOLD]
This elegant hand reeder and beading tool can be used to cut decorative profiles into furniture (such as beading on small table or cabinet edges or reeding on chair and table legs). It can also be used with a straight cutter for shallow rebating work, such as on mirror and picture frames. The convex sole and fence are helpful for curved workpieces, allowing the tool to follow contours, and its slim...
£36.00 inc VAT
Veritas Combination Plane with storage box & 7 cutters [Pre-owned]Veritas Combination Plane with storage box & 7 cutters [Pre-owned]
Revised
Veritas Combination Plane with storage box & 7 cutters [Pre-owned]
Please note: you may only have a maximum of 20 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.
£525.00 inc VAT
Veritas Custom-made No.4 - Smoothing Plane (with 55 degree and 45 degree frogs) [Preowned, SOLD]Veritas Custom-made No.4 - Smoothing Plane (with 55 degree and 45 degree frogs) [Preowned, SOLD]
Sold
Veritas Custom-made No.4 - Smoothing Plane (with 55 degree and 45 degree frogs) [Preowned, SOLD]
This plane has a fitted 55 degree frog with a 2'' wide PMV11 blade, large rear tote (back handle) and wide front knob. It also has a 45 degree frog should you wish to change your blade angle. Original box and instruction leaflet. Norris style central stainless steel adjusting screw. Lateral setscrews centre the plane blade in the plane mouth The width of mouth opening can be adjusted...
£285.00 (VAT exempt)
Page: First | | 5 | 6 | 7 | 8 | 9 | 10 | 11 |