Sort By
Per Page
View
Grid
List
Veritas Marking Gauge Replacement Wheel - (Outside)
Replacement wheel for the new style Micro-adust and Dual Marking gauges. Both the Inside and Outside cutters are required for the Dual Marking gauge.
Liquid Ink 200ml - Black
For Sumitsubo and Sumisashi, it is water soluble.
Brusso Brass Centre Pivot Hinge ST-18
The Brusso ST-18 brass centre pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 1¾" x 3/8" x 1/8".
Length: 1.750" - 1¾" - 45mm
Width: 0.375" - 3/8" - 10mm
Leaf Thickness:...
Flexcut Detail Knife KN13
The Flexcut Detail Knife has a very fine point for making the very narrow cuts associated with detailing.
Its straight 1½' blade can accommodate larger stock removal if needed.
Pegas Reverse Skip Blades
Reverse Skip Scroll Saw Blades have the same basic tooth geometry as skip blades except that a limited number of reverse teeth have been added to the bottom of the blade. Reverse teeth prevent splinters from developing on the underside of the work piece because the top teeth do not cut entirely through the work. Thickness of work range 1/4" to 2". Blades perform well with wood, plastic, bone,...
Connells 12 Pocket Leather Tool Roll
The Connell Leather Chisel Roll has 12 pockets, with top and tail design for better protection.
Will accept chisels up to 275mm (11') long.
Rolls up neatly for easier storage.
Made from soft moss backed leather for durability
Pockets reinforced with brass rivets. Ties for secure fastening.
David Barron 90 degree Guide
A very useful aluminium magnetic jig from David Barron for guiding a saw at right angles. Great for cutting shoulders, tenons, cheeks and variable finger joints. Will work with any style hand saw although the Gyokucho 372 saw works a treat for both cross and rip cuts.
Brusso Brass Side Rail Hinge SR-638
The Brusso SR-638 brass square knuckled full mortice side rail hinge is engineered with a built-in stop that allows a lid to remain open at a 95° angle. These hinges are milled from 1/4" thick solid brass stock to precise dimensions and are designed to last a lifetime. They feature stainless steel hinge pins and the standard Brusso burnished finish. The leaf measures 5/16" wide x 1-3/8"...
Knew Concepts Mk.IV Heavy Duty Fret Saw with Lever Tension & Swivel Blade Clamps
The Knew Concepts Mk. IV Fret Saws are designed to pull 50-60lbs of tension on their blades, which makes it much stronger, and the blades vibrate less than the standard saws. They are are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red, with a laser engraved logo and is extremely scratch and damage resistant.
The Cam Lever...
Lie-Nielsen Mortice Chisels
Designed with cabinetmaking in mind, these well-balanced Mortise Chisels are ground with parallel sides and are thicker than they are wide to help keep them straight in the cut.
Made of A2 Tool Steel, hardened to Rockwell 60-62, cryogenically treated and double tempered. Hard Maple handles. Overall length is approximately 10.5".
The bevel is ground sharp at 30º, but a higher secondary...
DMT Diamond Dia-Sharp 8'' Bench Stone - 3 Stone Deal
The surface of this plate has continuous diamond abrasive bonded to it (not polka dot pattern)
The 8" version of this bench stone is the most popular Dia-Sharp® size. It's large enough to handle almost any tool or knife and is offered by us in 7 grits. Guaranteed not to hollow or groove, DMT®'s precisely engineered Dia-Sharp® Bench Stone with continuous diamond surface assures...
Shinwa Sliding Bevel 250mm
Shinwa Sliding Bevels are ideal for marking out any angle. This one is 250mm (10") we also stock a 200mm (8") one.
Can be adjusted to any angle and is lightweight.
Fixing screw is on the end, therefore is never in the way.
Aluminium Handle
Stainless Steel Blade
MoraKniv Double Edge Spoon / Hook Knife Tight Curve - 162
This new re-designed Mora knife is ideal for spoon and bowl carving. It has a double-edged stainless steel blade so that you can use it for both pull and push carving. The 162 has the tightest curve of the Mora hook / spoon knives we carry.
Mora changed the design with input from renowned craftspeople Jögge Sundqvist and Beth Moen, with their help Mora have greatly improved upon the old spoon...
Famag Bormax 2.0 Metric Forstner Bit
The Famag Bormax 2.0 Metric Forstner Bit is a highly efficient tool designed for precise drilling in various materials, including soft wood, European hardwood, chipboard, and MDF. These Forstner bits are made from alloyed tool steel and are optimizsed for rapid drilling and chipping with minimal heat development, which significantly extends their service life.
Key Features:
Hexagonal Shank: Provides...
Sand-Flex Hand Block
These hand blocks have fine silicon carbide abrasive embedded throughout the rubber block which quickly removes rust from Cast Iron and Steel.
3 1/4" long x 2" wide x 3/4" thick.
Available in fine, medium, and coarse grits. Note coarse is shown in the main product picture
Made in Germany.
Brusso Brass Offset Pivot Hinge L-93
The Brusso L-93 offset pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 2½" x 5/8" x 1/4".
Length: 2.500" - 2½" - 64mm
Width: 0.625" - 5/8" - 16mm
Leaf Thickness: 0.250"...
Nakaya Ryoba 240mm Classic Saw
The Nakaya Classic Ryoba is a great universal saw for your workshop. Ryoba refers to the saw being double edged, so one side with cross-cut teeth, the other rip-cut.
Replaceable blade made from high-quality Japanese steel.
Double-edged cross-cut and rip-cut, perfect for mortise work.
Ultra-thin blade: 0.5mm thick.
Tooth spacing / teeth per inch cross-cut: 1.66mm or...
Lie-Nielsen Honing Guide Long Jaw Pair
The Lie-Nielsen Long Jaws fits blades for all their spokeshaves and for all the following Lie-Nielsen planes: No. 610, 10¼, 041, 042, 073, 1/2, and 85.
These jaws are reversible. The short end hones a bevel up to 40° and the long end hones a bevel up to 30°.
The Stick Chair Journal - Issue No 1
By Christopher Schwarz
This is issue No. 1 of The Stick Chair Journal, which Lost Art Press planned as an annual publication to expand the universe of all things stick chair: More history. More plans. More techniques. Reviews of tools. And Big Thoughts. It is a supplement to "The Stick Chair Book."
In this issue, you'll find:
• A Lousy Way to Run a Railroad: An explanation...
Knew Concepts 5'' Fret Saw with Screw Tension
The screw tension saw was the origin of the Knew Concepts Fret saw line. It is the economy model. It provides extremely precise blade tensioning simply by turning the knurled tension nut at the top of the frame.
Saws come with a dozen Pegas Skip #7 Tooth blades (15 TPI).
Joined:
A Bench Guide to Furniture Joinery
A Bench Guide to Furniture Joinery
By: Joshua A. Klein
Many woodworking how-to books have a distinctly clinical feel to them, taking a formulaic approach (complete with exploded computer-drafted imagery) to describe a woodworking process from start to finish. This method works well for conveying precise measurements and details for replicating a specific piece of furniture, but falls short when it comes to capturing the whole point...
Veritas Wide Router Plane Blades
These high-carbon steel router plane blades will fit the Veritas large and medium router planes, and the the Veritas hinge mortise plane, as well as Stanley #71 router planes (with the height-adjustment nut inverted). The narrow single-piece blades are available in five Imperial sizes
The 1/2" blades have a two-piece design and are available in two styles: straight and spear-point (for final...
Henry Taylor Registered Mortice Chisel
Made in Sheffield, England for over 150 years.
Blade about 5½" long.
F23 - 1/4" (6mm)
F24a - 3/8" (9mm)
F24 - 1/2" (12mm)
F25 - 3/4" (19mm)
F26 - 1" (25mm)
Lie-Nielsen No 101 Violin Maker's Plane
This pocket-sized block plane is the smallest of the Lie-Nielsen hand planes to feature a captive nut blade adjuster for precisely controlled depth of cut.
Loosely based on the Stanley No.101 block plane, the Lie-Nielsen Violin Maker’s Plane features several significant improvements that put it in a class of its own. The body and cap are made from Manganese Bronze for extra weight, durability,...
Veritas Curved Scraper Sets
These sets of three curved scrapers will handle a wide range of scraping jobs.
The rectangular model with convex/concave ends is excellent for bowl work or for scraping spindles.
The shmoo shape (easily recognizable to long-time readers of Li'l Abner) is equally useful for a wide range of concave surfaces as well as large moldings and small spindles.
The third style has two different gentle...
Veritas Chair Doctor Glue
Veritas Chair Doctor glue can penetrate narrow cracks in chairs. I used this on my kitchen chairs which had become decidely wobbly and they are able to withstand my sons rough treatment again - excellent.
If a chair has a loose rung, an injection of Chair Doctor Glue will first swell the rung & then bond it.
The low viscosity lets it soak into the end grain of wood, swell it and then freeze...
Veritas Card Scraper Burnisher
A new take on typical single-handled burnishers, this latest tool from Veritas is an innovative design permitting a two handed grip, improving control so you can roll precisely the sort of hook you want on your scraper. As comfortable to grip as a spokeshave, it is held between the thumbs and forefingers, keeping your fingertips close to the carbide rod. This gives you much better tactile feedback,...
Lie-Nielsen Hand Scraper Blade Set
Lie-Nielsen Hand Scraper Set
A pair of 6" x 2 1/2" hand scrapers made from premium, high carbon Swedish Tool Steel.
One scraper is 0.02" thick, which makes a very flexible scraper. The second is 0.032" thick, which is much stiffer. These blades are ground square on the long edges, are easy to use and very handy.
Brusso Brass Stop Hinge JB-102
The Brusso JB-102 brass square knuckled full mortice butt hinge is engineered with a built-in stop that allows a lid to remain open at 95°. It is milled from heavy brass stock and can be used when an additional stay is not desired. The leaf measures 1¼" in length.
Length: 1.250" - 1¼" - 32mm
Width: 0.495" - 1/2" - 12mm
Thickness: 0.187" - 3/16"...
Nagura Stone
The Nagura correcting stone is used to condition waterstones during use. For natural waterstones their use is to wear away hard particles or contamination in the waterstone, and to selectively allow flattening by being rubbed on a high spots on the stone. Another usage is to create slurry. Use with Ohishi stones of more than 1000 grit.
Nagura Stone size: 75 x 25 x 25mm
Pocket Stones
Used to create the finest edge on precision tools, delicate instruments, and die work. RH Preyda Arkansas files hold their shape while creating the finest, most uniform finish.
Recommended for outdoor enthusiasts in need of a sharp edge on fish hooks, arrows, and hunting knives. The pocket stone's compact size allows it to easily fit in your outerwear pocket, or pack inside your gear. Pocket...
Veritas Bench Dogs & Pups
These are made from solid brass rod. Sold in pairs.
The crosshatching and 2° slope on the face help to hold wood securely, pulling it down onto the bench's surface. A side spring slides cleanly and holds it in position.
The dogs are 110mm (4.3/8") long, the pups 60mm (2.3/8").
Both work well in combination with Veritas Wonder Dog and Wonder Pup Clamps. For 19mm (3/4")...
Crucible Card Scraper
Card scrapers are usually sold as rectangles or squares. What has been lost to time is that the woodworker is supposed to shape the tool to his or her needs – much like the cutting edge of a jack plane or smoothing plane.
So woodworkers of the last 50 or 60 years have found ways to make a rectangular scraper work. Most of us bow the tool with our thumbs to present a curved cutting edge to...
Veritas Wonder Dogs & Pups
Steel post and screw with black oxide finish, solid brass clamp head and handle.
These can pivot in any direction that clamping is required. An easy-adjusting handle provides ample clamping pressure in any position. The dog head has two screw holes, so any tip shape can be cut with a scroll saw and attached for specialized work.
The Wonder Dog post is 6½" and is drilled and tapped...
Brusso Brass Intermediate Offset Pivot Hinge LI-97rh
The Brusso LI Intermediate Offset Pivot Hinge fills the gap in their Offset Pivot Hinge line. This hinge is designed to be installed in the mid section of larger doors to provide additional strength and support. When installed inline with the L-97 Offset Pivot Hinges you receive the added benefit of an extra pivot point with the same low profile look of a Off Pivot Hinge. This hinge comes with the...
Lie-Nielsen Boggs Spokeshave
The original Boggs Spokeshave is hefty and solid, weighing 12 oz. Designed for fine, precise shaping in all woods. Available with either a flat or curved sole.
Body is 10" long with a 1" wide flat sole.
The sole of the Curved Spokeshave has a gentle, 5" radius for working inside curves.
2" wide x 1/8" thick A2 blade.
Bronze body and cap.
Hickory handles.
Weight is 12 oz.
Welsh Stick Chairs
By John Brown
Welsh Stick Chairs is a small but mighty book. At 104 pages long, this book can be read in an afternoon, but it has changed the lives of thousands of woodworkers all over the globe.
John Brown (1933-2008) was a chairmaker in Wales who specialized in Welsh stick chairs, a vernacular form of furniture that was typically made by the end users. Compared to Windsor chairs, Welsh stick...
The Stick Chair Book - Full-size Plans
To remove one more barrier to making a stick chair, we have created this set of full-size paper patterns of all the important components for the five chairs in "The Stick Chair Book".
The five 22" x 34" sheets contain full-scale drawings of all the seats, arms, backrests, shoes and combs for the chairs. The drawings also include all the mortise locations, drilling sightlines...
Brusso Brass Stop Hinge JB-103
The Brusso JB-103 brass square knuckled full mortice butt hinge is engineered with a built-in stop that allows a lid to remain open at 95°. It is milled from heavy brass stock and can be used when an additional stay is not desired. The leaf measures 1¼" in length.
Length: 1.250" - 1¼" - 32mm
Width: 0.618" - 5/8" - 16mm
Thickness: 0.187" - 3/16"...
Brusso Brass Lift-Off Hinge - Right Hand - LH-201RH
The Brusso LH-201 brass heavyweight lift-off cabinet butt hinge with two knuckles is suitable for doors with a thicknesses between 3/4" and 1". It measures 2½" x 1¾". This hinge is handed; a right-hand hinge is shown.
Length: 2.500" - 2½" - 64mm
Width: 1.750" - 1¾" - 45mm
Leaf Thickness: 0.104" - 7/64" - 3mm
Packs...
Cricket Tables
by Derek Jones
We will be sending out signed copies of this book until they are out of stock. If you did not want a signed copy then please contact us.
Simplicity, necessity and ingenuity are the three key principles for making cricket tables. This traditional three legged table exists in a variety of forms and woods – no two are the same. So making them follows an organic process –...
Brusso Brass Box Lid Stay JB-250
The Brusso JB-250 brass morticed lid support provides an elegant brass look and a functional and reliable 90 degree stop for boxes and cases. Excellent for humidor, jewellery box, and other keepsake projects.
The body is morticed into the side, and a flanged cylindrical anchor is pressure fitted and glued into the lid. The body measures 2-7/8" x 1/4" x 1/2" deep.
Length: 2.875"...
The Stick Chair Book:
2nd Revised Edition
2nd Revised Edition
This is the third edition of this book.
By Christopher Schwarz
You don't have to be a highly skilled woodworker to make a chair. And you don't have to be insanely wealthy to own a nice one, either.
The truth is that everyday woodworkers – farmers, amateurs and people in other trades – made wonderful chairs using common woodworking tools and whatever wood was available:...
Robert Sorby ProEdge Zirconium Belts
Designed for HSS tools, drill and router bits this material provides good value.
The 60 grit belt will tackle the most damaged surface. Use the 120 grit to provide a rewarding cutting edge and finish.
Veritas Low-Angle Block Plane + PM-V11 Blade
Veritas have made a block plane that uses a ''Norris'' style combined sideways (lateral) and up and down adjustment which gives you greater control when adjusting its impressive 1/8'' thick by 1 5/8'' wide PM-V11.
This plane also overcomes one of the drawbacks of other block planes in having higher side wings (ideal for shooting) with finger grips in each side. The...
The Belligerent Finisher
By John Porritt
One aspect of furniture finishing that has not been fully explained is how to achieve the gently worn, warm and human surfaces that you find on antiques. "The Belligerent Finisher" changes that. Furniture restorer and chairmaker John Porritt explains all the steps in taking a new chair and transforming it into something that looks like it’s 200 years old. The goal...
Brusso Brass Lift-Off Hinge - Left Hand - LH-201LH
The Brusso LH-201 brass heavyweight lift-off cabinet butt hinge with two knuckles is suitable for doors with a thicknesses between 3/4" and 1". It measures 2½" x 1¾". This hinge is handed; a right-hand hinge is shown.
Length: 2.500" - 2½" - 64mm
Width: 1.750" - 1¾" - 45mm
Leaf Thickness: 0.104" - 7/64" - 3mm
Packs...