Sort By
Per Page
View
Grid
List
Lie-Nielsen No.507 Rebating Block Plane
The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R).
This 12° angle rebate block plane is based on an old Sargent block plane (No 507). The plane body is made from unbreakable ductile iron and is ground flat and square to .001". The cap iron is polished bronze. The throat is non adjustable. It is 6¼" long...
Hock Chipbreakers
To maximize your plane's performance, a thicker chip breaker (cap iron) can stabilize the blade's cutting edge reducing vibration and chatter. HOCK Chip Breakers are 3mm thick (.118"), almost twice as thick as a stock chip breaker and they come with with a knurled cap screw.
Henry Taylor Incannel Firmer Gouges
Henry Taylor standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F11 - 1/4" (6mm)
F12 - 3/8"...
Douzuki Classic Saw
A dovetail saw with back, very fine teeth especially suitable for cutting tenon shoulders and precise wood joints.
A short robust little saw, 0.3mm thick blade.
Robert Sorby ProEdge Ceramic Belts
This hardwearing material is a great choice for profiling and re-profiling damaged tools.
The heavier 60 grit option is an efficient choice for removing plenty of material, while the finer 120 grit will provide a satisfying finish. Great longevity and highly practical.
Gransfors Bruk Small Forest Axe 420
Gransfors Bruks Small Forest Axe 420 is one of the most popular from the Gransfors Bruks range. The same size as the Hunters Axe but with a more traditional pattern and poll. The blade is thin. The handle is long enough to allow powerful chopping but not too long so it will fit into a rucksack, the back of a car or a boat. Practical for splitting small sticks for the fire or cutting small-diameter...
Veritas Dual Marking Gauge
The Veritas Dual Marking Gauge has two independently adjustable rods, which will allow you to set two measurements at once, so you can quickly alternate between them when transferring or marking repetitive dimensions. Projection up to 5-3/4" is easy to set, since an internal O-ring keeps light but constant friction on each rod; a thumbscrew firmly locks rods in place.
Like other Veritas marking...
The Essential Woodworker
By Robert Wearing
Robert Wearing's hand-tool masterwork. This book contains every skill you need to get into hand-tool woodworking. And it is explained with a minimum of fuss, using accepted traditional practice and with the assistance of more than 500 beautiful hand-drawn illustrations.
“The Essential Woodworker” is one of the best books on hand-tool usage written in the post-Charles...
Veritas Tapered Tenon Cutters
Veritas tapered tenon cutters will put tapered tenons on the tips of turnings, dowels or rustic furniture components to fit into tapered holes; for example, legs and spindles on a Windsor chair. Use the cutter like a hand-held pencil sharpener; you either rotate the workpiece while pressing it into the cutter body or you can rotate the tool on the workpiece. Works equally well in soft, green or hard...
Douzuki Gold Saw
The Douzuki has a metal spine to give some rigidity to the blade.
Professional quality pull saws with replaceable blades. These blades are robust and with usual wear they should last a long time. More care must be taken with the thinnest blade such as the Douzuki 150 & 210 saws which are designed for very fine cuts.
A choice of 4 sizes
Douzuki Gold 150 - 150mm blade - 0.2mm thick, spacing...
Pegas Coping Regular/Skip 6.5' Blades
For use in hand frames that require pinned end blades. These Pegas scroll saw blades are compatible for use in coping saws. Good for hard and soft wood up to 3/4" thick. Finish is medium to smooth depending on tpi selected.
6.5" (165mm) in length and supplied in packs of 6.
Descriptions below are:
Coping Skip 6.5" (Thickness in inches x Width in inches x TPI)
For example...
Additional Pegas #7 15tpi Skip Tooth Blades
As recommended by David Barron, these #7 skip toothed blades are the go to blades for removing waste from your dovetails.
5" (130mm) in length and supplied in packs of 12.
Pegas Skip Tooth #7 - (T 0.0015 x W 0.050 x 15tpi)
(Thickness in inches x Width in inches x TPI)
Each Knew Concepts saws comes with a pack of 12 blades.
The Woodworker's Pocket Book
Edited by Charles H. Hayward
“The Woodworker’s Pocket Book” is small – just 4” x 6-1/2” – but it contains 112 pages of critical woodworking information for the hand tool woodworker.
Edited by the great Charles H. Hayward and published in 1949, “The Woodworker’s Pocket Book” is a guide to everything from finishing recipes to drawing ellipses...
Auriou Cabinet Maker's Rasps
These are the Right Handed versions, to see the Left Handed please CLICK HERE.
These are the basic rasps for shaping work. They are relatively wide in proportion to their length giving you considerable cutting power. You will get surprisingly smooth finishes to your work. As a general guide you should chose a rasp which is 3/4 times longer then the width of the piece you are shaping.
As an example...
Worked: A Bench Guide to Hand-Tool Efficiency
By: Joshua A. Klein
There is a gap in most woodworking instruction. Somewhere in between tool descriptions (what they are and what they do) and step-by-step project tutorials, we are missing something vital. We may understand what a backsaw is, or what a hatchet is capable of… but how do we actually do it? How do we engage the wood with these tools? And how do we confidently proceed through...
Brusso Brass Stop Hinge JB-101
The Brusso JB-101 brass square knuckled full mortice butt hinge is engineered with a built-in stop that allows a lid to remain open at 95°. It is milled from heavy brass stock and can be used when an additional stay is not desired. The leaf measures ¾" in length.
Length: 0.750" - 3/4" - 19mm
Width: 0.495" - 1/2" - 12mm
Thickness: 0.187" - 3/16" -...
Veritas PM-V11 Bench Chisels
Precision made in Veritas' own machine shop, these bench chisels are milled from PM-V11 steel (Rc61-63), an innovative proprietary alloy. This metal's micro-structure makes it extremely durable, so it can withstand the impact of heavy chopping cuts without chipping or deforming as readily as other tool steels, even at bevel angles as low as 20°. Highly wear resistant, the edge typically...
Auriou Double Bevel Lettering Chisels
This range of double bevel lettering chisels forms the backbone of the Chris Pye Lettering Tools range. To view more tools from the range please follow this link.
These tools were designed by master carver Chris Pye and hand forged in the traditional way by Auriou Toolworks at Forge-de-Saint-Juery in France.
The chisels are allongee chisels with a slim blade section. Allongee is a style of blade...
Doormaking and Window-Making
As the Industrial Revolution mechanized the jobs of the joiner - building doors and windows by hand - one anonymous joiner watched the traditional skills disappear and decided to do something about it.
That joiner wrote two short illustrated booklets that explained how to build doors and windows by hand. And what was most unusual about the booklets is that they focused on the basics of construction,...
Sack Ups Plane Sack - Jack Plane SU546
Protect your valuable planes with these impregnated sacks made by Sack Ups which inhibit rust corrosion. More effective than any smelly old sock.
Sack-Ups are Silicon treated to prevent rust and to wick moisture away from your valuable tools. They provide protection for your tools and prevent dings and scratches. Keeping your tools looking as new as they did the day that you bought them.
Available...
MoraKniv Single Edge Spoon / Hook Knife - 164 Right Hand
This new re-designed Mora knife is ideal for spoon and bowl carving. This model has a single cutting edge optimised for right handed use. So if you held it in your right hand it would cut on the pull. It can be used in the left hand but would require a push stroke away. The 164 has a tight curve.
Mora changed the design with input from renowned craftspeople Jögge Sundqvist and Beth Moen, with...
Pfeil Palm Carving Tools
Pfeil Palm Carving Tools are for cutting and carving wood.
They have Pear Handles, 135mm overall length, and 80mm blade length.
See images for individual blade shapes.
Sets of 8 include a Linden wood stand (340 x 145 x 50mm, weight 850g).
There are two sets available:
B8er - A includes: B1/12, B1s/12, B3/12, B5/12, B7/14, B8a/10, B9/10 & B12/8.
B8er - B includes: B2/12, B4/12, B7L/12, B8/10,...
Norton Honing Oil
Norton oil is recommended as a lubricant for all oil stones.
Also suitable for hinged or moving parts of hand tools, locks, Albert's knees etc. Safe for kitchen use, but ingestion should still be avoided!
Size: 4.5fl oz or 133ml
Sack Ups Plane Sack - Smoothing Plane SU545
Protect your valuable planes with these impregnated sacks made by Sack Ups which inhibit rust corrosion. More effective than any smelly old sock.
Sack-Ups are Silicon treated to prevent rust and to wick moisture away from your valuable tools. They provide protection for your tools and prevent dings and scratches. Keeping your tools looking as new as they did the day that you bought them.
Available...
Pfeil Straight Gouge - Series 6
Straight Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery. Our broad range of sweeps and widths opens unlimited possibilities in sculpture carving.
Euclid's Door: Building the Tools of 'By Hand & Eye'
By Geo. R Walker & Jim Tolpin
Illustrations by R. Keith Mitchell & Barb Walker
“Euclid's Door: Building the Tools of ‘By Hand & Eye’” is an illustrated how to journey through building the ancient tools that still help us to build, well, everything today.
You’ll learn how to use basic, easy-to-follow artisan geometry to make eight indispensable...
Henry Taylor Bevel Edge Chisels
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles and brass ferrules.
Made in Sheffield, England for over 150 years.
F55 - 1/4" (6mm)
F56 - 3/8" (9mm)
F57 - 1/2" (12mm)
F59 - 3/4" (19mm)
F60 - 1" (25mm)
Parts and Accessories for Veritas String Inlay Tool System
Used much like a marking gauge, this inlay tool lets you accurately cut narrow grooves in a workpiece as well as neatly slice fine strings from a sheet of veneer. Its interchangeable blade system lets you quickly swap blades to suit the activity.
The hook-shaped blade is designed to cut grooves. Used in a sweeping push-pull motion, it has outlining spurs on one side of the blade to score the groove...
The Anarchist's Workbench
By Christopher Schwarz
The Anarchist’s Workbench” is – on the one hand – a detailed plan for a simple workbench that can be built using construction lumber and basic woodworking tools. But it’s also the story of Christopher Schwarz’s 20 year journey researching, building and refining historical workbenches until there was nothing left to improve.
Along the...
Vallorbe 10" Blunt Mill File Single Cut
Vallorbe single cut mill files are used in preparation for saw sharpening, and for squaring the edges of cabinet scrapers prior to sharpening. Can be used in conjunction with Veritas Jointer/Edger. Handles are also available, please see separate listing.
Brusso Brass Offset Pivot Hinge L-39
The Brusso L-39 brass offset pivot hinge is employed when a minimum of visible hardware is desired, or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 1¾" x 3/8" x 1/8". The L-39 has a longer knuckle for wide throw conditions.
Length: 1.750" - 1¾" - 44mm
Width:...
Vallorbe 'Crocodile' File Handles
Antislip plastic file handle with hardened threaded insert. These can be reused time and time again.
#5 Fits 10-12" files. Recommended for:
10" mill file
7" regular saw file
#4 Fits 6-8" files. Recommended for:
8" mill file
#3 Fits 4-6" files. Recommended for:
6" mill file
7" slim and 6" saw files
#2 Fits 4-6" files. Recommended for:
6"...
Robert Sorby ProEdge Trizact Belts
Perhaps the most popular in the range of belts. This robust material is designed to handle the demands of all steels. Not strictly 'grit sizes' these belts are built using brick and pyramid abrasive shaping.
The highest 3000 'grit' size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels.
Lie-Nielsen No.62 Low Angle Jack Plane
The Lie-Nielsen No.62 Low Angle Jack Plane. What is not to like? You take the most popular and useful jack plane and bed it at a low angle (12°). This makes the most versatile group of planes even more versatile.
Comes with a 2" (50mm) wide A2 steel blade which is .175" (4.5mm) thick. From the box it has a 25° bevel, but it is worth sticking a secondary bevel of 5° on it if...
Veritas Large Tapered Reamer
The Veritas large tapered reamer 5mm to 30mm (3/16" to 1-3/16") is useful to rustic furniture makers for back-tapering holes for through-tenon wedging.
The bit is 140mm overall length with an 8mm hex shank.
Designed for use in an electric drill, this tool may also be used in a traditional brace.
The Veritas small tapered reamer 5mm to 19mm (3/16" to 3/4") is useful to rustic furniture makers for...
Veritas Standard Blades for Combination & Small Plough Planes
All blades are made from A2 tool steel. Blades are made in Canada. These blades are suitable for both the Veritas Small Plough Plane and Veritas Combination Plane.
The standard blades are stocked for the right hand versions in 1/8", 3/16", 1/4", 5/16", and 3/8" or 4mm, 5mm, 6mm, 7mm, 8mm and 10mm widths.
Pfeil Long Bent Gouges Series 7L
For shaping recesses and working in corners.
Peacock Wax - 60ml
A natural, innovative and luxurious wax finish in a 60ml tin!
Handmade in Skelton Saws' workshop, Peacock Wax is a unique blend of the world’s finest traditional oils and waxes. This lustrous finish provides a protective film for both previously sealed wood and bare metal surfaces.
Wood Protection:
Suitable for use on previously sealed wood, Peacock Wax will protect and enhance a...
Abranet Mixed Bag of Strips
Abranet strips are aluminium oxide resin bonded polyamide fabric strips. We offer a choice of the most popular grits from 80grit (coarse) through to 600grit (super fine).
Strips measure 70mm by 125mm
Brusso Brass Offset Pivot Hinge L-87
The Brusso L-87 brass offset pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 2" x 1/2" x 3/16".
Length: 2.000" - 2" - 51mm
Width: 0.500" - 1/2" - 13mm
Leaf Thickness: 0.188" - 3/16"...
Brusso Brass Shelf Pin K-10
The K-10 brass shelf support pin comprises a decorative turned support and a cylindrical peg, which fits into the K-2 sleeve. The peg measures 1/4" in diameter x 3/8" deep, and the support projects 7/16". Supplied as a set of 4.
Veritas Dovetail Saddle Markers
These Veritas dovetail saddle markers are precision machined at 1:6 and 1:8 angles, the traditional angles for softwood and hardwood dovetails respectively. The long legs ensure accurate registration.
Also, much like the Veritas® Saddle Square™ they are based on, they allow a continuous line to be transferred around the corner, so the straight and angled lines can be scribed at the same...
Cutters for the Lee Valley Cast Scratch Stock
These cutters are for the Lee Valley Cast Scratch Stock.
Made in Canada.
Robert Sorby ProEdge Aluminium Oxide Belts
This common abrasive is designed primarily to sharpen carbon steel bench chisels, carving tools and plane irons but will also hone harder high speed steel tools.
The material longevity is at the lower end of the abrasives scale they use on their belts, but makes an excellent economical choice. Work your way through grit sizes (heavier grits for the removal of more material) to achieve a fine finish...
Veritas Marking Gauge Replacement Wheel
Replacement wheel for Veritas gauges. Not suitable for the new style micro-adjust marking gauge.
Pfeil Arkansas Slipstones
Pfeil Arkansas Slipstones are available in four different profiles (see picture). They come separately, or, as a set of 4 in a wooden box.
The grit is in the region of 8000 and the size of the stones is approximately 60mm x 25mm 5mm
By Hand & Eye
By Geo. R Walker & Jim Tolpin
"By Hand & Eye" is a deep dive into the world of history, architecture and design.
Instead of serving up a list of formulas with magical names (i.e. the Golden Section, the Rule of Thirds) that will transform the mundane into perfection, George R. Walker and Jim Tolpin show how much of the world is governed by simple proportions, noting how ratios...