Sort By
Per Page
View
Grid
List
Robert Sorby Fingernail Profile Spindle Gouge 1/2''
Robert Sorby fingernail profile spindle gouge are ideal for fine detailing on spindle work. The wing tips are ground back to reduce the danger of catching when working in confined areas.
1/2'' spindle gouge. 18 1/2'' in length overall.
Flexcut Starter Knife Set KN500
Flexcut have put together the perfect package to get you started in carving with knives.
These knives are made with the same edge holding properties as their gouges and chisels and come honed and ready for use. The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue.
Set includes: Cutting Knife (KN12), Detail Knife (KN13) and Roughing Knife (KN14) and a block...
Shapton Lapping Powder
Shapton Lapping Powder for use with the The Shapton Lapping System.
Available in three grades.....
Coarse (80 grit) - to be used with heavily dished stones and 120 to 320 grit Shapton stones.
Medium (180 grit) - to be used with 1000, 1500 & 2000 grit Shapton stones. This can also be used on the finer stones if they are also heavily dished stones.
Fine (4000 grit) - to be used with...
Veritas Standard Angle Block Plane + PM-V11 Blade
This is the standard angle version of the Veritas low angle block plane.
Preferred for general-purpose work, the 20° bed angle plus the 25° bevel angle on the bevel-up blade result in an effective cutting angle of 45°, the same as found in most bench planes.
A low-profile lever cap results in a plane that fits the hand well, at only 1/8" higher than its low-angle sibling.
Mechanically,...
Workshop Waist Apron from Lost Art Press
Shop aprons that cover the torso are great in cold climes, but they are impractical during the summer or in heated shops. For years, we tried using tool belts for carpentry, but those are designed for a ridiculous amount of equipment and a 50’ tape measure.
The solution that we love is a waist apron. It is compact and won’t leave a giant sweat stain behind like some shop aprons. And...
Pfeil Scorp
The Pfeil scorp is a specialist tool for hollowing out bowls or for spoon making and has a closed ring with cutting edge and handle.
Please note that this Pfeil Scorp is not honed and ready to use.
Blade width 33mm
Veritas Miniature Shoulder Plane
Weighing a mere 1.7 oz and measuring 2-1/2" long by 1/4" wide, this miniature version of the Veritas medium shoulder plane was developed out of a desire to test the limitations of their materials, design, and manufacturing processes (not to mention the patience of their engineers!).
Despite its diminutive size, it is fully functional and remarkably effective for fine trimming or cleaning the bottoms...
Slow Adjuster for Veritas Bevel-Up Planes - Type A
The fine thread on this Norris-style adjuster slows blade advancement, making it easier to set blade projection precisely. An easy retrofit, it simply replaces the regular adjuster supplied with our bevel-up planes.
Two versions are available. This type fits the bevel-up smoother, bevel-up jointer, low-angle jack, low-angle smooth and low-angle block planes.
Made in Canada.
Veritas Front Vice - Large
This vise has rugged, machined, double guide rods and a single-lead Acme screw.
The large front vise is 10-1/2" × 21" overall with a 1-1/8" dia. screw, and 13" clamping capacity (less the thickness of your wooden jaws). The larger vise has an offset center screw to allow vertical clamping without skewing.
Can be added to an existing bench or built into a new one.
Mounting screws included.
Made...
Lettercarving in Wood:
A Practical Course
A Practical Course
By Chris Pye
Letters are everywhere and lettercarving in wood is a tremendously useful skill for a carver to have: from memorials to signing work; from decorating bowls to house signs.
This book from internationally renowned woodcarving instructor Chris Pye will teach you fundamental lettercarving skills with which to artfully add words or text to an otherwise plain piece of wood.
For beginners,...
Robert Sorby ProEdge Long Grind Jig
Helps you to create three different fingernail profiles.
Woodcarving:
Tools, Materials & Equipment
Tools, Materials & Equipment
By Chris Pye
Woodcarving, Tools, Materials & Equipment is jam-packed with information about the craft of woodcarving. This well-illustrated guide by master carver Chris Pye covers all you need to know about the tools of the trade.
Covering a wide array of carving challenges such as proper clamping technique to the strengths and limitations of tools, expert Chris Pye offers a wealth of information...
Tormek RM-533 Rubber Mat
With the Tormek Rubber Work Mat RM-533 you get a water proof yet non slip surface.
The raised rim will retain any water spillage, you get a convenient and tidy base for your sharpening system.
Size 533 × 343mm (21" × 13½").
Fits all Tormek models.
Lie-Nielsen 12 Tool Chisel Roll
12 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
Orbicut
Orbicut is from the manufacturers of Kirjes in Sweden...........
Designed to be safe and efficient (yes it was designed by Swedes!) it has two HSS cutters inserted into a ball which project about 0.1mm. This small amount of projection makes the tool easy to control whilst producing thin shavings instead of dust.
* Works fast and efficient at a low speed (5000Max RPM).
* Stays sharp for a long...
Rob Cosman 3/4 Dovetail Saw
Cutting tiny dovetails (dovetails in 3/8 inch and less thick stock) is a bit challenging if using Rob's regular sized dovetail saw - it can be done, but I wanted a better saw for this application. That is why he designed his 3/4 dovetail saw. As compared to Rob's regular-sized dovetail saw, the 3/4 dovetail saw's thinner saw plate, smaller teeth, shallower depth of cut, and shorter overall...
Robert Sorby 1/16' Slim Parting Tool
This Robert Sorby 1/16" handy parting tool is designed to give the cleanest and finest of cuts with the minimum of waste wood. Its 1¼" blade width eliminates the flexing and twisting normally associated with such a thin blade.
The double bevel HSS cutting face gives the very finest of cuts. For added security the blade is seated and riveted deep into the handle.
Robert Sorby 6 Piece Turning Tool Set
Beginners 6 Piece Woodturning Set in a box.
The ultimate full size, all round woodturning set. Perfect for the beginner for any type of turning from bowls to spindles. These 6 tools are also essential for the more experienced turner.
Contains:
3/4" Roughing Tool
1/8" Parting Tool
3/8" Bowl Gouge
3/8" Spindle Gouge
3/4" Oval Skew
1/2" Round Nose Scraper
A...
Saburrtooth 2'' (50mm) Round (Donut) Faced Shaping Wheel
Saburrtooth 2" (50mm) round faced wheel.
Bore Size: 3/8"
Veritas Round Burnisher
The secret to effective hand scraping is a good hook on the edge of the scraper. The Veritas burnisher has an extra hard, smooth finish that not only forms a uniform hook on all shapes of scrapers, but also minimises friction during burnishing.
Hardened to Rc58-60, this burnisher is substantially harder than the scrapers on which it is used. The 5/16" diameter A2 tool steel rod is 4 3/4"...
Auriou Riffler Rasp - Rhombus / Brush
These are hand stitched with a comfortable "fat" hexagonal barrel handle which allows you to use the riffler for long periods of time without discomfort or fatigue. Grain 14 is extremely fine and grain 10 is fine.
Ray Iles Extra Large Froe
Froes are designed for heavy duty work, the blade is 12" long and made from chunky 60mm x 10mm EN45 spring steel, to withstand the twisting forces exerted on it. Fully hardened and tempered. The blade is ground tapered the full width of the blade, from top to bottom and the canal or cutting edge is rolled, as with our premium froe. This helps it to glide through the wood, making it easier to use, particularly...
Pfeil Palm Carving Tool Sets
Pfeil Palm Carving Tools are for cutting and carving wood.
They have Pear Handles, 135mm overall length, and 80mm blade length.
See images for individual blade shapes.
Sets of 8 include a Linden wood stand (340 x 145 x 50mm, weight 850g).
There are two sets available:
B8er - A includes: B1/12, B1s/12, B3/12, B5/12, B7/14, B8a/10, B9/10 & B12/8.
B8er - B includes: B2/12, B4/12, B7L/12,...
Veritas Edge-Trimming Planes
Edge-trimming planes are used for final trimming cuts on jointed boards to ensure smooth edges at exactly 90° to the face, and for working end grain. In many instances you will need only one model; the appropriate choice is often based on which of your hands is dominant.
However, neither model is exclusively for left or right handed users, as the planes are in fact complementary. Having both...
Veritas Shooting Board Fence
The Veritas Shooting Board Fence Kit lets you construct a shooting board that doesn’t limit you to one angle – the fence is adjustable to let you easily shoot mitres of various angles. A spring-loaded button registers in fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60° to let you quickly adjust the fence to shoot square angles as well as mitres for frames with ten, eight,...
Gyokucho Blade for Fugaku Folding Kataba 240mm (112)
Replacement for the Gyokucho #112 saw
Lie-Nielsen 1 1/2'' (38mm) Bevel Edge Socket Chisel
We are sorry but these chisels are unavailable until further notice. Please sign up to be notified when they are back in stock.
Robert Sorby Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle. Fitted with a tapered brass ferrule for comfort and elegance.
Replacement Blade for Nakaya Ryoba 240mm Classic Saw
Replacement blade for the 240mm Ryoba Classic Saw.
0.5mm thick blade with trapezoid teeth for crosscuts andt triangular teeth for rip-cut.
Panga Panga
Panga Panga has dark colours, with rich parenchyma bands bringing a touch of the exotic to finished pieces. Used in furniture, turning, parquet flooring and carving.
Veritas Large Beading Blades for Combination Planes
These large beading blades are for use only with the combination plane, and are available in 5/16", 3/8", 7/16" and 1/2" bead diameters. All blades cut a 1/16" groove on either side of the blade. Made in Canada.
Veritas Pocket Plane + PM-V11 Blade
The Veritas Pocket Plane at just 4½" long and 1¼" wide overall, and weighing just less than 11oz, is aptly named - it's small and light enough to carry in an apron pocket all day.
Designed with a bevel-up configuration and a fully functional combined feed and lateral adjustment mechanism, it has a finer cutting action than you might expect from such a small tool. This makes it admirably suited...
Benchcrafted Planing Stop
The Benchcrafted planing stop is made from mild steel. The teeth are milled into the stop then lightly deburr with abrasive paper to maintain the points of the teeth. The stop arrives sharp and ready to use.
Easy Installation
Using the same principle as their Barrel Nuts, the Benchcrafted Planing Stop mounts to the wooden stock via two machine screws and a single, double-tapped barrel nut. This provides...
Veritas Steel Honing Plate
The Veritas Steel Honing Plate measures 204 x 76 x 9.5mm and weighs 1.1kg.
Precision-ground to flatness tolerance of 0.127mm (0.005").
An excellent substrate for diamond paste (available separately).
Made of dimensionally stable low-carbon steel to retain its flatness. Surface pattern helps capture diamond grit without compromising flatness.
The plates can be glued to a backing board...
Ray Iles Cutters for Record 043 Plough Plane
RI011 - Set of replacement cutters to fit Record 043 plough plane
Imperial - 1/8'', 3/16'' & 1/4''
Metric - 4mm, 6mm & 8mm
Robert Sorby Short Tool Platform with Arm
Increases access when tools are getting old and worn.
Tormek Small Knife Holder
The Tormek Small Knife Holder SVM-00 opens up the possibility to sharpen those really small knife blades, which up until now have been difficult to sharpen.
Normally small knives have been sharpened free-hand but every time it was a challenge to get a consistent shape and almost impossible to control the edge angle.
The holder works together with the Tormek Knife Jig SVM-45.
You can sharpen...
Gloforce Eye-Light Plus
The Gloforce Eye-Light Plus is a 10w small but extremely bright battery floodlight with 270mm magnetic gooseneck stand. Extremely versatile, ultra bright 10w LED rechargeable floodlight.
The light head only weighs 220g, has a diameter of 70mm, comes with a helpful LED battery indicator and it even acts as a power bank and can charge your phone.
The strong rubber magnetic gooseneck will position...
Hock 1'' Carving Knife
This Carving Knife is a general purpose carving knife and the rounded point is very durable. A great knife suitable for beginners.
The length listed is an approximate blade length.
Handles are made from Jatoba with nothing more than an oil finish.
Kirjes Complete Sanding System
The Kirjes Complete Sanding Kit includes the following:
Kirjes Sanding & Polishing Motor
Kirjes Flexible Shaft
KJ101 5 drum sanding kit complete (see separate product) with one of the 80, 150 & 320 grit sanding sleeves for each drum.
Hand Pump
Instructional Booklet "The Velvety Wood Surface"
Kirjes Short & Fat Cylindrical Sander - 42 x 44mm Drum
This Kirjes short & fat Cylindrical Drum Sander is 42 x 44mm
Comes with one 220 grit sleeve. Additional sleeves available separately.
The sanding cloth material is highly flexible and made of the very best quality, sanding not only wood but also metals, plastic, bone and horn.
The sharpness of the abrasive lasts a long time, however, we highly recommend using a cleaning stick to considerably...
Lie-Nielsen 10 1/4 Rebate Bench Plane
Also known as a Carriage Maker’s or Jack Rebate Plane, this is one of the largest rabbet plane made. Based on the Stanley 10¼, which went out of production in the mid-1940s, we modified the design to fit the Bedrock format. Adjustable side nickers make clean, cross-grain cuts. Both handle and knob can tilt left or right to give better access and control in tight corners.
12-3/4"...
Saburrtooth 1/4'' Ball Nose 3/4'' x 1 1/4''
Head Diameter: 3/4"
Head Length: 1¼"
If grits are not displayed they are no longer available.
Veritas Canvas Apron
With cross-back straps to place the weight of the apron on your shoulders instead of your neck, this apron is 100% cotton canvas, a lightweight and durable material.
At about 34" long and 28" wide, the bib provides ample front and side coverage. The shoulder straps are easy to adjust with low-profile, unobtrusive clips, and the adjustable waistband has a quick-release buckle. A pocket...
Veritas Miniature Marking Gauges
These are fully working versions of the Veritas wheel marking and dual marking gauges, but only one third of the size. Their smaller scale allows greater control and makes these exquisite tools perfect for small marking tasks that require a delicate touch. Each is 57mm long and weighs just over 14g and 21g respectively.
Like their full-size counterparts, they cut (not tear) fibres for clear marks...
Veritas Set-Up Blocks - 9 Piece Metric Set
Setting up machines in the shop can be a frustrating and inaccurate undertaking. Tape measures and rulers are difficult to use when measuring gaps between curved bits and guide fences. Worse, machines often require two hands to adjust, leaving nothing to hold the measuring tool. The Veritas set-up blocks help solve this problem. Simply place the appropriate block or combination of blocks between the...
Henry Taylor Woodcarving Punch - Square Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Oscar Rush Small Bowl Adze
A hand forged 30mm diameter hand adze with a compound sweep profile to the cutting edge (more of a U profile).
The head weight is approximately 450g with a 210mm - 215mm long (just over 8'') hand carved, faceted, kiln dried ash handle.
The leather adze cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
This adze has been...