Sort By
Per Page
View
Grid
List
Hock Chipbreakers
To maximize your plane's performance, a thicker chip breaker (cap iron) can stabilize the blade's cutting edge reducing vibration and chatter. HOCK Chip Breakers are 3mm thick (.118"), almost twice as thick as a stock chip breaker and they come with with a knurled cap screw.
Hock Marking Knife Blades
This right or left hand, spear point marking knives (bevels are on one side only) are perfect for scribing fine lines against a straight edge.
High carbon steel. All steel knife.
Hock Replacement Blades for Stanley-Style Scraper Planes
The blades for the Stanley No.12 and No.112 Scraper Planes are 3/32" thick by 2-7/8" wide and 5" long with a 45 degree bevel on the cutting edge. Hardened for a balance of long edge life and burr "rollability".
No.80 replacement blade (also fits the Record 080) measures 1/16" X 2-3/4" X 3" long.
No.81 replacement blade measures 1/16" X 2-1/2"...
Hock Scratch Stock
Ron Hock Scratch Stocks are made from tough, wear-resistant bamboo plywood. Two spring steel blades are included, one of which has a quirk-bead shape cut into it, to get you started using your Scratch Stock with no more than final honing. Other shapes are up to your imagination and are cut into the blades with files and slipstones.
The body measures 3/4" x 1-1/2" x 4-3/4", the blue-tempered...
Journeyman Handcrafts Canvas Tool Roll
Keep your carving tools protected and portable with this Journeyman Handcrafts tool roll made from heavy weight 16oz green cotton canvas.
Designed with 16oz cotton canvas, this pouch is made to last and will endure many years of hard use. It’s double stitched with a very strong bonded nylon thread which is water and rot resistant. Finished with veg tan drawstrings for longevity and wooden toggles...
Journeyman Handcrafts Wool Lined Tool Roll
Keep your carving tools protected and portable with this Journeyman Handcrafts tool roll made from a two colours of 8oz waxed cotton canvas giving a lovely contrast of colour when rolled up. The tool roll is lined with a cream wool to give added protection to your tools.
This tool roll is made to last and will endure many years of hard use. It’s double stitched with a very strong bonded nylon...
Leadwood
Leadwood is well suited to turning and carving. Dark brown heartwood with blackish streaks. Hard, heavy and durable. Sandpapers, varnishes and oils well to a high lustrous finish.
Lee Valley 3/4'' Dog Hole Bushings
These 3/4'' hardened steel bushings help you make an accurate dog-hole drilling guide using any 1 1/2'' thick board.
Knurling on the bushing provides a mechanical lock when installed in an appropriately sized hole (1'' for the 3/4'' bushing), and a projecting rim ensures that it rests perpendicular to the jig's surface.
Made in Canada.
Lee Valley Vice Rack Stop
This simple device from Lee Valley is designed to help prevent racking when clamping work at one side of a vice. Simply stack up as many of the 0.10" thick shims as you need to match the approximate thickness of your work, up to a total of 4", and insert it into the vice opposite the work being clamped.
For thicker work, you can add a piece of scrap wood to occupy the bulk of the space, and then...
Lee Valley Winding Sticks
Winding sticks are not new; woodworkers have been making them for years from scrap wood and using them to check the flatness of material. Placed at opposite ends of a board, they accentuate any twist (wind), making it easier to identify and correct. With the sticks in place, sight across their top edges. If the edges are parallel, the board is not twisted. Reposition and repeat to check the entire...
Leonhard Muller Brush-Hook (Billhook)
Leather wrapped handle. Rounded tip.
430mm overall (14")
260mm cutting edge (10")
Leonhard Muller Classic Carpenters Side Axe
Good quality side axes are very difficult to source. We are happy to offer this ash handled side axe which has a 13cm edge to its sharpened blade. The length overall is 38cm and weighs approximately 1.2kg.
Available as a left or right handed axe.
Made in Austria by Leonhard Muller & Sons who have been making edge tools for over 333 years (which makes Leonhard extremely old!) This side axe...
Leonhard Muller Froe
Supplied with a 400mm (16") ash handle this froe is from Muller's "Carpenter's" range of edge tools.
The blade length is 350mm (14")
Weight 1.5kg
Lie Nielsen Carbide Burnisher
Creating a burr on a scraper requires a hard, highly polished surface.
The Lie Nielsen Carbide Burnishers have a 4" polished solid Carbide shank held in a Cherry handle. A flared Brass bolster protects your fingers while burnishing.
Lie-Nielsen Carcass Saw with Cherry Handle
The Carcass Saw is used for precise cuts across the grain, cutting tenon shoulders, and defining the edges of a dado.
It has 14 points per inch, filed crosscut, for cutting quickly, yet accurately and smoothly.
Blade is .020" (.5mm) thick, with a .003" (.076mm) set.
Overall length, including handle, is 19" (48.26cm), with an overall height of 4-7/8" (12.38cm).
Usable blade dimensions are 14"...
Lie-Nielsen Honing Guide
The Lie-Nielsen version of the side clamping style of honing guide is solidly machined from Stainless Steel, with a Bronze bearing.
Their Honing Guide features removable jaws: it comes with a standard pair of jaws that fit most Lie-Nielsen blades, and additional jaws are available (sold separately) for Chisels 3/16" and under, tall jaws for Mortice Chisels, long jaws for very short blades and...
Lie-Nielsen Honing Guide Mortice Chisel Jaw Pair
The Lie-Nielsen Mortice Chisel Jaws fit all Lie-Nielsen Mortice Chisels, as well as their 1" Bevel Edge Chisel.
Lie-Nielsen Mortice Chisels
SPECIAL NOTE - MARCH 2025
Please have a look at our Friday Finds section as we currently currently have 2 pre-owned (but hardly used) sets that will save you a few well earned pounds!
Designed with cabinetmaking in mind, these well-balanced Mortise Chisels are ground with parallel sides and are thicker than they are wide to help keep them straight in the cut.
Made of A2 Tool Steel, hardened...
Lie-Nielsen No 101 Violin Maker's Plane
This pocket-sized block plane is the smallest of the Lie-Nielsen hand planes to feature a captive nut blade adjuster for precisely controlled depth of cut.
Loosely based on the Stanley No.101 block plane, the Lie-Nielsen Violin Maker’s Plane features several significant improvements that put it in a class of its own. The body and cap are made from Manganese Bronze for extra weight, durability,...
Lie-Nielsen No. 85 Scraper Plane
Scraping Planes are used for finishing woods that do not yield well to the hand plane. A scraping plane is more comfortable to use than a hand scraper, and a plane body helps you keep the surface you are scraping flat.
They can be tricky to master, however. To make it easier, Lie-Nielsen do not recommend using a burr, at least until you’ve learned how to use the tool. These tools will cut...
Lie-Nielsen No.1 Iron Smoothing Plane
The Lie-Nielsen No.1 Smoothing Plane in iron. This is based on the famous (and somewhat scarce) Stanley No.1. The size makes it more comparable to a block plane than a smoother but nonetheless this small bench plane is suitable for detail work.
5-1/2" (14cm) long
Blade is 1-3/16" (3cm) x .110" (2.79mm) thick.
Weight is 1.35 lbs. (612 grams)
Lie-Nielsen No.4 Iron Smoothing Plane
Lie-Nielsen's smoothing planes are precision machined from a manganese bronze casting, or an iron casting. They all come with a beautifully formed handle and knob made from American cherry. They have the Stanley Bedrock style frog which gives a fully machined mating fit between the frog and body. You can move the frog backwards or forwards, allowing the opening or closing of the plane's mouth...
Lie-Nielsen No.40B Butt Mortice Plane
The Butt Mortice is a simple to use plane that produces precise mortices of uniform depths with sharp, square corners.
The body is cast iron with a bronze blade cap, and the handles are polished cherry. The sole has a long slot that gives a clear view of your work and allows for quick removal of shavings. The plane measures 9 3/4" x 1", with a 3/4" wide blade.
Lie-Nielsen No.5 1/2 Jack Plane
A Lie-Nielsen No.5 1/2 Jack Plane. Probably the most popular bench plane, and the one that many woodwork teachers recommend starting out with due to its versatility.
The equivalent of a later type Stanley Bedrock No.605½.
14 3/4" (375mm) long.
2 3/8" (60mm) wide blade. A2 steel.
Iron body, 7lbs (3.15kg).
Lie-Nielsen No.5 Jack Plane
The equivalent of a later type Stanley Bedrock No.605 jack plane.
14" long (355mm)
2" wide blade (50mm)
Iron body 5-1/2lbs (2.5kg)
Lie-Nielsen No.60 1/2 Block Plane
The Lie-Nielsen No. 60½ Block Plane is based on the legendary Stanley No. 60½. This low angle block plane from Lie-Nielsen is a superb little tool for any toolkit — ideal for trimming end grain, chamfering edges, and general fine-tuning.
Adjustable Mouth – The movable front shoe lets you open or close the mouth easily: fine for delicate finishing, wider for more aggressive...
Lie-Nielsen No.7 Jointer
The Lie-Nielsen No.7 Jointer Plane is a great plane for edge jointing and flattening larger areas.
The late, great Alan Peters used his No.7 for pretty much everything, and today we still come across ex-students which still favour their jointer over any other plane.
The equivalent of a later type Stanley Bedrock No.607 jointer plane.
22" (558mm) long.
2 3/8" (60mm) wide blade....
Lie-Nielsen Small Router Plane Closed Throat
Loosely based on the Stanley No. 271, these small Router Planes are perfect for shallow mortise and small relief work. The compact design makes it easy to guide along narrow edges and fit into tight spaces.
The Closed Throat design gives more support in front of the blade, making it ideal for working on the edges of boards or cleaning out the end of a stopped groove in a rail or stile.
Lie-Nielsen...
Lie-Nielsen Tongue & Groove Plane - 1/2''
The Lie-Nielsen Tongue & Groove Plane (1/2") cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one-piece blade registers on the milled body casting, to ensure squareness and equal depth of cut on both sides. Since this is a heavy stock removal tool no depth adjuster is needed.
Made to centre on 1/2" stock, tongue...
Mastercarver 3 Piece Knife Set
Mastercarver® has improved the handle comfort of their popular 3 piece knife set. The naturally shaped hardwood handles will fit your hand better for superior grip and comfort. Perfect for right or left-handed use. The handles are lightly finished with natural Tung oil. Unlike ordinary varnish used on others, Tung oil prevents skin blistering and discomfort.
The blades are the 3 most popular...
Muller French-Style Sculptors Adze
Again, these adzes are from Leonhard Muller's Carpenter's Hatchets range but they are based on the traditional French design where the head gradually flares from the poll. 3 sweep widths to chose from and all come with straight hickory handles.
Straight 450mm hickory handles (about 18")
Choice of 65mm, 60mm or 56mm wide medium sweep cutting edge.
Narex Richter Bevel Edge Chisels
Until recently we stocked the Narex 8116 range of bevel edge chisels which were popular amongst students and people starting out in woodworking. Most importantly the steel in the 8116 range was very good but in our opinion the balance and feel would sometimes let them down. I'm glad to say that this new premium range 8150 from Narex is a massive improvement upon the old chisels. Yes they are not...
New Veritas Micro-Adjust Wheel Marking Gauge
Veritas have refined and redesigned their ever popular wheel marking gauges. This new micro-adjust wheel marking gauge draws on two decades of manufacturing experience, with subtle improvements across the board.
The adjustment mechanism built into the stainless-steel rod is intuitive to use. After setting the approximate projection, you can fine-tune the position of the cutter within a range of...
Oscar Rush Large Bowl Adze
A hand forged 50mm diameter hand adze with elliptical sweep profile to the cutting edge.
The head weight is approximately 600g with a 230mm - 235mm long (just over 9''), hand carved, faceted, kiln dried ash handle.
The leather adze cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
This adze has been carefully designed for...
Oscar Rush Medium Carving Axe
A standard weight carving axe retaining a relatively compact design but with a broader curved edge for slicy cuts.
This carving axe has a 120mm - 125mm (5'') edge - SYMMETRICAL grind only for this axe (also known as double grind).
The head weight is approximately 625g. If striking the poll, do so with a wooden mallet (not a steel hammer)
The handle - hand carved 300mm - 320mm long...
Oscar Rush Side Axe - Left Grind
A hand forged, 130mm - 135mm (5 1/4'') edge side axe. LEFT grind.
The head weight is approximately 775g.
Handle - 320mm long (just over 1'') hand carved, faceted, kiln dried ash handle.
The leather cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
This axe has been carefully designed as an all rounder rather...
Oscar Rush Side Axe - Right Grind
A hand forged, 130mm -135mm (5 1/4'') edge side axe. RIGHT grind.
The head weight is approximately 775g
Handle - 320mm long (just over 12'') hand carved, faceted, kiln dried ash handle.
The leather cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
The axe is belt sharpened (2000 grit) and then polished on a wheel...
Oscar Rush Small Bowl Adze
A hand forged 30mm diameter hand adze with a compound sweep profile to the cutting edge (more of a U profile).
The head weight is approximately 450g with a 210mm - 215mm long (just over 8'') hand carved, faceted, kiln dried ash handle.
The leather adze cover is made by Oscar using Italian leather with solid brass rivets (these are much stronger than cap rivets).
This adze has been...
Oscar Rush Small Carving Axe
A small carving axe for all sizes of carving.
This stout hand forged carving axe has a 95mm - 100mm (4'') edge - SYMMETRICAL grind (also known as double grind).
The head weight is approximately 475 - 500g.
If striking the poll, do so with a wooden mallet (not a steel hammer).
The handle is hand carved by Oscar, 275mm - 285mm long (just over 11''), faceted, kiln dried ash...
Pax Razor Saw
The Pax Razor Saw has a fine toothed blade with 40tpi and no set on the teeth so this gives a smooth finish to your work. it is suitable for precision work and very small areas of wood. As the teeth are so fine, it is perfect for those delicate areas, which need the best finish.
The saw has a brightly polished brass back and a Rosewood handle.
Blade length 6″, 42tpi.
Popular with model...
Pfeil - 25 Piece Carving Set
This large fully forged Pfeil 25 piece carving set is for challenging carving projects and contains the roll case, 80mm wooden mallet, 2 genuine Arkansas stones, honing oil, carving knife and 20 full size carving tools.
The tools included are:1/16, 1s/16, 2/20, 3/3, 3/12, 3/25, 5/35, 7/20, 8/7, 8/18, 8/25, 9/7, 8a/18, 9/15, 7L/25, 11/2, 11/10, 15/3, 12/10 and 14/8.
This in plain english means
16mm...
Pfeil - 8 Piece Carving Set
This Pfeil 8 piece carving set is a starter set containing 7 full size fully forged tools and one chip carving tool. It is supplied in a rugged canvas roll case and the tools are honed and sharpened ready for use.
The tools included are 1/12, 1s/12, 5/12, 4/20, 7/10, 9/4, 12/8 and KERB12.
This in plain English means a 12mm chisel,
12mm skew chisel,
Series 5 12mm gouge,
Series 4 20mm gouge,
Series...
Pfeil Chip Carving Knife - Kerb 1
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 1 also known as Rosenmesser.
A simple knife for chip carving with a straight blade. You can use it to carve patterns (geometric or simple flowers) as well as whittling.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 50mm
Pfeil Chip Carving Knife - Kerb 12
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 12 also known as Fuchmesser.
The most popular Pfeil knife for one-handed carving on small objects where the small piece of wood is held in one hand and the knife is used with the other hand. Compared to the Kerb 1 it has a curved blade which is not suitable for chip carving but which runs easily through the wood for rougher...
Pfeil Chip Carving Knife - Kerb 13
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 13 also known as Schnitzmesser Gerade.
The use of a Kerb 13 is similar to the Kerb 12 but with a straight blade more for cutting shapes and angles on small objects. Not suitable for chip carving, because of the size of the blade.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Pfeil Chip Carving Knife - Kerb 15
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 15 also known as Gebogen, 2 Schneiden.
This is a small knife to carve fine details on objects and figures. The curved blade cuts on both sides and has a pointy tip so it can be used in many ways. It is not suitable for chip carving.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length...
Pfeil Chip Carving Knife - Kerb 5
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 5 also known as Schnitzhaken.
For one-handed carving on small objects, with this specialist shape you can reach deepened areas from above. Not made specifically for chip carving.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 55mm
Pfeil Chip Carving Knife - Kerb 7
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 7 also known as Kerbmesser.
This knife is for whittling or chip carving. The blade is curved so it will carve the wood easily but it cannot be used to carve straight lines as you can with the Kerb 1 or Kerb pfeil.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade length 40mm