Classic Hand Tools

View Cart
 
 
 
     
   
     

    Secure Online Shopping

   
 

Secure Online Shopping


Online Catalogue >  Shop by Manufacturer  >  Manufacturers N-Z  >  Veritas  >  Veritas Workbench Accessories


Veritas Bench Hold Down
Ref: 05G1401


The Veritas hold-down can clamp workpieces to a bench or anywhere a 3/4" hole can be drilled.

Exceptionally high clamping forces can be obtained with this hold-down for two reasons. First, with the arm free to pivot independently, all levered forces are exerted downward, without any losses due to horizontal slippage from the canting action of the hold-down post. Second, the fine barb-shaped grooves on the post resist upward forces, yet still allow easy entry into a hole. The long, low-profile arm is unobstructed at the clamping end, allowing good access to work from all sides. The 10" hold-down post gives you 8" of clamping capacity, matching the 8" throat capacity.

For use in holes where through travel is limited, a retrofit shorter hold-down post is available separately. At just 5-1/2" long, it provides about 4" of clamping capacity.

Used vertically in the top of a bench, or hori-zontally in a side skirt. Clamping forces are infinitely variable by tightening the clamping knob (machined brass) to any degree. The arm and body are made from the high-strength zinc-aluminum alloy ZA-12, and the post from machined steel.

Patented. 


Price: 55.96 (Including VAT at 20%)

Veritas Bench Hold Down

Quantity:  



Optional 5 1/2" Post for Hold-Down
Ref: 05G1402


For use in holes where through travel is limited, a retrofit shorter hold-down post is available separately. At just 5-1/2" long, it provides about 4" of clamping capacity. 


Price: 8.00 (Including VAT at 20%)

Optional 5 1/2

Quantity:  



Veritas Bench Dogs & Pups
Ref: 05G04


These are made from solid brass rod. Sold in pairs.

The crosshatching and 2° slope on the face help to hold wood securely, pulling it down onto the bench's surface. A side spring slides cleanly and holds it in position.

The dogs are 110mm (4.3/8") long, the pups 60mm (2.3/8").

Both work well in combination with Veritas Wonder Dog and Wonder Pup Clamps. For 19mm(3/4") dog hole.

Price incl VAT 


Veritas Bench Dogs & Pups

Quantity:  


Veritas Bench Dog 18.18
Veritas Bench Pup 15.05



Veritas Wonder Dog and Pup
Ref: 05G10


Steel post and screw with black oxide finish, solid brass clamp head and handle.

These can pivot in any direction that clamping is required. An easy-adjusting handle provides ample clamping pressure in any position. The dog head has two screw holes, so any tip shape can be cut with a scroll saw and attached for specialized work.

The Wonder Dog post is 6½" and is drilled and tapped at a 3° angle, the side spring smoothly adjusts the clamp head at any desired position.

The Wonder Pup post is 2¾" and a rubber O-ring around the dog post allows for height adjustment.

Both the Dog and Pup install in a 3/4" hole.

Both work well in combination with Veritas Bench Dog and Pups.

Price incl VAT 


Veritas Wonder Dog and Pup

Quantity:  


Veritas Wonder Dog - 05G1001 24.42
Veritas Wonder Pup - 05G1002 20.26



Veritas Fast-Action Hold-Down
Ref: 05G47.01


Hold-down clamp with integrated cam lock for quick clamping on the bench top. The arm is pressed down by turning the cam lever and reliably holds all kinds of workpieces in place. The arm has a low-profile clamping end, allowing good access to work from all sides. Comes with protective leather pad for padding the clamp for sensitive surfaces.

Jaw depth 120 mm, Jaw height 200 mm, Shaft diameter 19 mm

Price includes VAT 


Price: 75.00 (Including VAT at 20%)

Veritas Fast-Action Hold-Down

Quantity:  


 

Online Catalogue >  Shop by Manufacturer  >  Manufacturers N-Z  >  Veritas  >  Veritas Workbench Accessories