Sort By
Per Page
View
Grid
List
Saburrtooth 1/4'' Dove Tail 3/4'' x 1 1/4'' (Smooth End)
Head Diameter: 3/4"
Head Length: 1¼"
Saburrtooth 1/8'' Ball Nose - 1/8'' x 7/8''
Saburrtooth 1/8" ball nose available in extra fine, fine and coarse.
Head Diameter: 1/8"
Head Length: 7/8"
Saburrtooth 1/8'' Burrs Set - Coarse
This set of 1/8'' burrs from Saburrtooth includes the following in Coarse (green):
18BN14 Ballnose
18C14 Cylinder
18F38 Flame
18S38 Sphere
18BUD14 Bud
Saburrtooth 1/8'' Cylinder - 1/8'' x 7/8''
Saburrtooth 1/8'' Cylinder available in fine and coarse.
Head Diameter: 1/8''
Head Length: 7/8''
Saburrtooth 1/8'' Dove Tail Acute - 3/8'' x 3/8''
Head Diameter: 3/8"
Head Length: 3/8"
Surfer Airplane Wooden Kit
The new Sky Surfer launches planes in a predictable and repeatable way – for testing your airplane designs so you can figure out the best way to make planes for long flights, returning flights and those fancy trick flights like loop-de-loops, and landing in the cat bowl.
An easy to make and use kit with foam pads, extra elastics and a world of great individual and family fun – learning...
Flexcut Detail Jack JKN90
The Flexcut Detail Jack can handle a variety of projects start to finish. Its single detail knife quickly removes wood from convex surfaces, while its fine point is perfect for detailing delicate areas.
The Pistol Grip handle design is crafted from aerospace-grade aluminium and is ergonomically designed to allow a strong grip for long periods of carving with minimal hand fatigue.
Rob Cosman Dovetail Marking Knife with Saw-tooth Blades
What Rob says
'In 2013 I perfected a process taught by Ernest Joyce for transferring your tail-board cuts onto the pin board, resulting in a perfectly placed starter kerf. Without removing the waste, Ernest would place his dovetail saw in the tail-board cuts and mark onto the top of the pin board. It was cumbersome and uncomfortable to hold the saw by its teeth, and it increased the risk of...
Flexcut 1'' Mini Draw Knife KN17
This miniature draw knife by Flexcut is designed for hard-to-reach areas, where a pulling action is more conducive to efficient stock removal. The flexible shank allows the cutting angle to be changed easily for contoured cuts.
Made in the USA by Flexcut.
Flexcut Pro Series 2'' Roughing Knife FP03
The 2'' Flexcut Pro Roughing Knife features a robust full flat grind sheepsfoot blade in precision heat treated 1095 steel, polished to a brilliant mirror finish.
This knife excels at handling heavy preliminary stock removal work. The longer blade length, slim profile, and detail tip provides plenty of blade to cover a wide variety of heavy cuts in various stock sizes while maintaining full...
Hock Scraper Plane Kit
The Ron Hock Scraper Plane Kits are precision-made from jatoba. The O1 Hock blade is bedded at 95° and hardened to Rc58 for burr "rollability".
The parts are taller than their Krenov-style Plane Kit to allow for necessary blade access and a comfortable grip.
1 3/4" Iron Width x 11" Finished Length
Pegas Wood Blade Selection Pack
Includes the following blades in equal quantities.....
Skip Tooth #1 - 23tpi (90.402)
Skip Tooth #3 - 19.5tpi (90.404)
Skip Tooth #5 - 16.9tpi (90.406)
Skip Tooth #7 - 15tpi (90.408)
Reverse Skip Blades #5R - 12/9r tpi (90.429)
Modified Geometry #3 SPR - 13/7tpi (90.440)
All 130mm blades with plain ends (not pinned).
3 of each blade is included for the 18 piece pack, and 6 of...
Pfeil Sculpture's Adze
The Pfeil Sculptor's Adzes follow old French designs.
Available with Straight, Curved or Round blades, these tools are forged from quality tool steel, hardened and sharpened with Hickory handles.
Straight:
Overall length 450mm (about 18").
Weight 800gms.
Cutting edge of 65mm.
Curved:
Overall length 450mm (about 18")
Weight 850gms.
Cutting edge of 60mm.
Round:
Overall...
Robert Sorby Box Scraper
The special cutting profile of this Robert Sorby box scraper makes it ideal for cutting the parallel side walls of end grain boxes. The small radius on the point at the bottom of the cutting section creates a smooth intersection between the side wall and the flat bottomed vessels. The profiles cause this to be very responsive and sensitive in use.
3/4" Box Scraper - 16" with handle
Spare Blade for Lie-Nielsen No. 3 Smoothing Plane
Replacement blade for Lie-Nielsen No. 3 Bench Plane.
A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish...
Gifkins F5 Finger Jig Template Upgrade Kit
The F5 template cuts a joint with delicate 5 mm fingers, and is fully adjustable, maintaining the quality and accuracy that is synonymous with products from Gifkins product range.
The template uses a specially designed solid carbide cutter and will handle any thickness up to a maximum of 13 mm. As with dovetailing, the finger joints are cut on a table mounted router, giving the operator much greater...
Robert Sorby Thread Cutting Sets - 89HS
The Robert Sorby Thread Cutting Sets comprise a choice of 10, 16 or 20 tpi thread cutter pairs made in high speed steel with a unique helix angle for use in wood, a thread & sizing gauge and an instructional DVD "Focus on Threadcutting"
We also stock the Relief Cutting Tool (RS-895H), Tool Support (RS-893H) and the Thread and Sizing Gauge (RS-973) - all of these will make the forming...
Crown Tools HSS Continental Spindle Gouge
These are Crown Tools versions of Continental Spindle Gouges which are similar to the old carbon steel gouges.
Continental spindle gouges are made by forging a curved blade from a flat bar (similar to a roughing gouge but shallower) and depending on the size can be used like a standard gouge and also a small roughing gouge.
To measure a continental gouge you measure the width across the top of...
Flexcut Power Gouge Interchangeable Handle RG102
Allows any RG range reciprocating gouge to be used as a hand tool.
Gloforce 225mm Gooseneck Extension
This Glofroce 225mm Gooseneck extension is slightly shorter than the 270mm version but slightly thicker and even more secure.
It can be used with the Eye-Light Pro, Suction Cup or MagFoot and comes with a female 1/4" UNC thread on one side and a male 1/4" UNC thread on the other.
Flexible extension arm for positioning Gloforce accessories such as the Eye-Light Pro, Suction Cup, or MagFoot with...
Build a Dutch Tool Chest with Chris Schwarz
Tool chests come in many sizes and shapes. The Dutch Tool Chest is roomy, but portable – well thought out storage for the essential kit of tools for hand tool woodworking. Chris Schwarz builds these in a weekend.
Chapters
1. Introduction
2. Stock Selection and Orientation
3. Lay Out Baselines and Dovetails
4. Cutting Dovetails
5. Lay Out and Cut the Pins
6. Dados
7. Assemble the...
Kutzall 1 3/4'' Polyplug Insert
Enhance the performance of your Kutzall Contour Wheels with these PolyPlug (3/8'' bore) Accessories! They are designed to fit inside the wheels to help optimize performance and extend their life.
Reduces vibration for a smoother, quieter, and more comfortable operation.
Increases mounting accuracy resulting in a more 'true' operation - also allows the wheel to wear evenly for...
Lie-Nielsen Honing Guide 30° Skewed Jaw Pair, Left Hand
These Lie-Nielsen 30° Skewed Jaws fit the Lie-Nielsen No. 98/99 Side Rabbet Planes (left hand).
Barr Small Slick
Built with the same fine construction as the large slick, the small slick has a 5" blade length making it a little less hefty.
2½" cutting edge, 5½" blade length, length from cutting edge to end of socket 12", length with handle 26
Crown Tools Bead Forming Tool
The Crown Tools Bead Forming Tool is used for accurately cutting beads which are identical each time.
Sharpen across the top with an oilstone or diamond hone.
Available in two sizes, 1/4'' (6mm) and 3/8"' (10mm)
M2-HSS (High Speed Steel)
Stained beech handle. Walleted.
Any Port - Greetings Card
Any Port is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
21cm x 10cm (DL)
Flexcut No.5 Sweep Gouges
The Flexcut No.5 Sweep Gouges are interchangeable blades with a shallow cutting edge. These unhandled gouges are compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.
Available Widths:
2.5mm (micro) SK802
1/8" (3mm) SK601
9/16" (14mm) SK401
1 1/16"...
Mastercarver Flex-Shaft Essential Set
The Mastercarver Flex-Shaft Essential Set includes the following maintenance items:
Spare Inner Flex-Shaft x2
Spare Outer Sheath x1
Pro Flex-shaft Lube x1
Note: parts will fit on all 1/2hp, 1/3hp & 1/4hp Mastercarver® Flex-shaft motors from 1985 to present.
Includes instructions.
Robert Sorby 1/4'' & 1/2'' Bead Cutting Tip
The Robert Sorby Bead Cutter is one of five additional cutters available for the popular Robert Sorby Multi-tip Hollowing Tool. This double sided cutter will cut beautiful beads on spindle work at 1/4" and 1/2" and is one of two beading cutters available for this tool.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity...
Auriou Locksmiths Rasp
This is a very typical old French combination shaped rasp. It is called a locksmiths rasp and has a large knife shaped end and a rat tail end.
It is 250mm overall (10 inches) and is used to shape mortises or grooves, not just by locksmiths nowadays but used by sculptors.
Grain 9.
Bee on a Comb - Greetings Card
Bee on a Comb is an image of one of Fiona Kingdon's creations which has been printed on 300gsm card and blank inside for your own greeting.
15cm x 15cm
Robert Sorby 3/8' & 5/8' Bead Cutting Tip
The Robert Sorby Bead Cutter is one of a few additional cutters available for the popular Robert Sorby Multi-tip Hollowing Tool. This double sided cutter will cut beautiful beads on spindle work at 3/8" and 5/8" and is one of two beading cutters available for this tool.
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity...
Set of 3 Narex Marking Knives
Set of 3 Narex Marking knives; 2.5mm, 1.2mm, & 0.75mm.
The Narex marking knife is an essential tool for creating marks on wood when laying out precision joinery or transferring measurements. The flat handle profile prevents the knife from rolling off the bench.
With the addition of laser cut finger indents which are useful for applying pressure closer to the tip.
Handle: Polished Rosewood...
Woodpeckers Engle Angle 6''
Woodpeckers Engle Angle 6'' (150mm). 2023.
This tool is inspired by the vintage #30 Stanley Angle Divider from 1903. By fitting the connected legs into an existing corner, the tool bisects the angle automatically. This is particularly important when mitering trim for existing structures. Corners that should be 90° are quite often not. If the corner is 88° instead of 90° the Engle...
.png "Last Ones!")
Saburrtooth 6mm Cylinder - 3/4'' x 1''
15% discount from price shown.
Toothed Blade for the Lie-Nielsen 102 Block Plane
Replacement blade for the No. 102 or No. 103 Block Planes. Comes with a 25° flat ground bevel.
1.250'' wide x .125'' thick
A2 cryogenically treated Tool Steel
Toothed blades have small chisel-like teeth .030'' (.762mm) wide, and spaced .030'' apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
Please...
Woodpeckers Hook Stop
Hook rules have been around for ages, and allow you to reference quickly and exactly against the starting edge of a board. The Woodpeckers hook simply attaches to the Woodpeckers woodworking rules using two screws.
Woodpeckers woodworking rule not included, but can be found by clicking here
Robert Sorby Set of 5 Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle.
This set of 5 comes in a cardboard presentation box and includes the following sizes: 1/4'', 3/8'', 1/2'', 3/4'' and 1''
Fitted with a tapered brass ferrule for comfort and elegance.
Flexcut Wide-Format Palm Set FR404
For those who require the close control of a palm-sized tool but need to remove larger amounts of wood. The low-resistance edge gives them the feel of a narrower tool.
Palm Tools included: FR400 #3 x 5/8', FR401 #5 x 9/16', FR402 #8 x 3/8', FR403 70 deg. x 3/8'.
Arbortech Sanding Pad for Power Carving Unit
100mm sanding pad for the Arbortech Power Carving Unit is slightly flexible, making it good for sanding medium to large projects and capable of moulding to slight contours. It has a hook and loop facing for rapid abrasive changing. Use the Sanding Pad in combination with the Chip Catcher and attach to a vacuum for wood dust control or with the Levelling Guide to achieve flat, smooth surfaces.
Blue Spruce Spearpoint Blade for Chisel Plane
A spearpoint blade to fit the Blue Spruce Chisel Plane. Gets you into the tight spots that the flat blade struggles with.
A2 steel. Honed and ready to go.
Woodpeckers Rule Stop 2
Woodpeckers Rule Stop-2.
Simply take any ruler and add this well engineered stop stop to help you repeat your accurate marking out.
Spare Blade for Lie-Nielsen Small Bronze Spokeshaves
Replacement blade for the Flat or Curved Sole Small Bronze Spokeshaves. Comes with a 25° flat ground bevel.
* 1.375" wide x .125" thick
* A2 cryogenically treated Tool Steel
Blue Spruce Router Plane Fence
Optional fence for the Blue Spruce Toolworks Router Plane. Attaches using two screws and can placed on three sides of the plane.
Saburrtooth 6mm Sphere - 1/2' x 1/2''
15% discount from price shown.
Woodpeckers Stainless Steel Squares
Woodpeckers Stainless Steel Precision Woodworking Squares with Rack-It
These squares feature the same one piece precision machines central core found in all Woodpeckers fixed blade squares. Some of the highlights.......
Metric graduations
One piece central core
Cheeks are narrower than core to give a shoulder to give stability when laying out
Mark parallel to an edge by dropping a pencil...
Henry Taylor Woodcarving Punch - Star
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Flower 4
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
