Sort By
Per Page
View
Grid
List
Kutzall 1/4'' Ball Nose Burr - 1/4'' x 1-3/8''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Robert Sorby Curved Scraper
The curved end profileof thie Robert Sorby Scraper makes this excellent for creating, smoothing and blending curved surfaces in bowl and spindle work, eg round bottomed boxes. This new tool is able to take an agressive cut, whilst retaining the butterfly sensitivity for the refining cuts.
3/4" Curved Scraper - 16" with handle
Veritas Small Scraping Plane
The Veritas Small Scraping Plane is a great tool for the final smoothing of small, flat surfaces, even highly figured timber, or small areas of difficult grain within a larger surface.
The scraping plane comes into action after the surface has been prepared as well as possible using a finely tuned smoothing plane. What the scraping plane does is to replace the need for sanding prior to applying...
Glenn Lucas Heavy Duty Bowl Roughing Gouge
The Glenn Lucas 3/4'' Heavy Duty Bowl Roughing Gouge with a 16" handle.
Ideal for rough shaping of unseasoned wood.
The gouge features a secondary bevel on the heel to give the tool some clearance when going around tight corners making concave curves or coves.
Gyokucho Razorsaw ZA 240mm
Full Name : Gyokucho Razorsaw ZA.
Blade Length : 240mm.
Overall Length : 535mm Rattan / 540mm TPE.
Max Cutting Depth : 55mm.
Teeth Pitch / TPI : 1.5mm / 16.9
Blade Thickness : 0.3mm.
Cutting Width : 0.51mm.
Teeth Pattern : Crosscut.
Gyokucho Product Number : 306 Rattan / 307 TPE.
Weight : 185g Rattan / 240g TPE.
Replacement Blade : S306
A very useful crosscut saw with a...
Clifton No.5 Jack Plane
A Clifton No.5 Jack Plane.
The smaller of the two jack planes from Clifton.
All Clifton planes have a heavy casting, so if you do not need the extra width of the wider 5 1/2 plane, this could be the jack plane for you.
Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment of the mouth.
Blade is cryogenically treated...
Pfeil 11 Piece Woodcarving Set
The Pfeil 11 piece woodcarving set has 11 full size tools supplied in a tool roll. The set was developed in collaboration with the National Trade School in Groden, South Tyrol.
Included in the set are 1S/10, 1S/20, 1S/30, 3/35, 4/20, 5/12, 7/10, 7/35, 11/5, 11/10 and number 12 (55mm) knife.
Pfeil Large Straight Drawknife
This Pfeil Straight Drawshave comes with a goatskin case and has cherry handles.
The blade is 250mm in length and the overall length is 440mm.
Classic carpenters design with straight back and straight blade.
Auriou Traditional Stonecarving Gouges Series 6
The Auriou Traditional Stonecarving Gouges Series 6 are meticulously crafted for exceptional performance in soft stone and marble carving. Available in a range of sizes from 8mm to 25mm, these gouges offer precise control and durability for various sculpting tasks. The traditional "fat" hexagonal barrel handle ensures comfort during extended use.
Sizes Available: 8mm, 10mm, 12mm, 16mm,...
David Barron Dovetail Spline Guide
Designed by David Barron to be used across the mitred corners of boxes. It accurately cuts the slots for reinforcing splines, with a 1:6 dovetail angles on one side and a 90° edge on the other.
Flexcut Hook Hone PW18
The Flexcut Hook Hone is used to sharpen the inside edge of any hook knife. This sharpening tool used abrasive paper as a more aggressive solution than stropping to remove nicks and scratches from the cutting edge.
Includes 400 and 600-grit abrasive paper and an instructional guide.
Robert Sorby Beading & Parting Tool
The Robert Sorby beading and parting tool is a versatile tool used for parting off as well as producing beads. Its size makes it very stable, but also very sensitive in use. Ideal for creating the spigots to fit in a chuck.
3/8" Beading & Parting Tool - 18¾" with handle.
Flexcut Pelican Knife KN18
The Flexcut Pelican Knife with its curved 1 5/8' blade offers a clean slicing action similar to a skew. The point is narrowed for a tight turning radius while still being durable. Cuts very well in hollow areas.
Robert Sorby Round End Swivel Tip
The Robert Sorby Round End Swivel Tip is an excellent choice for removing waste material very quickly especially undercutting. A true work horse designed for the multi-tip hollowing tool but suitable for a range of Robert Sorby tools (see below)
Sharpening: Use a diamond file or honing stone flat across the face. To gain best results and increase the longevity of the cutter this simple procedure...
Kutzall 1/4'' Taper Burr - 3/4'' x 1-1/4''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Veritas Tool Wax
Veritas Tool Wax. Applied sparingly and polished to a sheen, the light, clear microcrystalline wax creates a barrier that inhibits corrosion and protects against moisture, airborne pollutants and finger marks.
At the same time, it will gently remove grime and wax build-up. When used on a plane sole, machine table or fence it reduces friction, allowing smoother movement of workpieces. Only a small...
Barr Fat Boy Slick
If you need a big slick for paring, this is the one! The curved edge skives into the material lessening the initial force needed to start your cut.
3½" cutting edge, 7½" blade length, 16" from edge to end of socket, length with handle 30".
Kutzall 3 Piece Coarse 1/4'' Burr Kit
Kutzall burrs are the perfect companions for your rotary carving tools.
Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.
Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.
NOTE: These burrs should only...
Toothed Blade for Lie-Nielsen No. 60 1/2 Block Plane
Lie-Nielsen toothed blades have small chisel-like teeth .030" (.762mm) wide, and spaced .030" apart. They are used for heavy stock removal in difficult grain. Follow this with a fine-set Smoothing Plane.
Toothed blades are great for quick, heavy stock removal. However, something like a knot in pine can break the teeth so be careful around difficult spots. We recommend that you hone your...
Bessey Horizontal Toggle Clamp with Open Arm and Horizontal Base Plate
In the clamped position‚ the lever is horizontal.
Automatic and infinitely variable adjustment of the clamping height 0 - 65 mm (2 ½ In.) while clamping force remains unchanged - without having to make manual changes to the position of the pressure screws.
Clamping force is variable up to 2‚500 N (550 lbs) depending on the adjustment of the set screw in the cantilevered joint.
Sturdy‚...
Curved Replacement Blade for Veritas Dowel & Tenon Cutters
The curved blade is a replacement blade for the Veritas Dowel and Tenon Cutters. It can also be used on the 3/8", 7/16" and 1/2" Veritas Tapered Tenon Cutters (not recommended for the larger sizes as overheating may occur).
Lie-Nielsen Model Maker's Block Plane No.100
This delightful, small low angle tool fits snugly in the palm of your hand. It is a miniature work-horse ideal for all sorts of chamfering and trimming jobs.
Blade is 7/8" wide, .125 thick. At 4 3/8" long and 1 1/4" wide, weighing 8oz, this plane is effortless to use.
Spare Blade for Lie-Nielsen Large Router Plane
Replacement blade for the No. 71 Large Router Plane.
* 3/8" square tip
* O1 Tool Steel
Note: Blade does not work in vintage Stanley planes
Lie-Nielsen 50 Degree Frog
If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog.
Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch). The higher pitches make smoothing difficult wood easier.
These 50 degree frogs will fit Lie-Nielsen...
Blue Spruce Optima Skew Chisel Sets
Optima Skew Chisels fit into intricate joinery cuts when the others just won't. The blades are thin, flat and have a concave edge profile that gets you into the tightest places with ease while the 65° skew angle of the blade shaves fibers cleanly. Whether you're tackling something as complicated as a full-blind dovetail or simple, but tiny tenons, Optima Skew Chisels will get the job done.
All...
Kutzall 4 Piece Fine Detail 1/8'' Burr Kit
This is the perfect Kutzall tool set for woodcarving enthusiasts who demand the details. Featuring a selection of four (currently unavailable individually), 1/8'' shaft rotary burrs in the 'Fine' grade, they are designed for adding delicate touches and refining small details with ease. This exclusive set provides the control and accuracy needed for everything from fine lines to intricate...
Robert Sorby Set of 5 Octagonal Handled Bevel Edged Chisels
Robert Sorby Set of 5 Octagonal boxwood handled Bevel Edge Chisels with brass ferule and leather washer in a cardboard presentation box.
Includes 1/4'', 3/8'', 1/2'', 3/4'' and 1'' chisels
Overall Size 265 - 340mm
Blade Length 127 - 178mm
Veritas Shoulder-Vice Screw
This vice screw is for the L-shaped shoulder vise used on Scandinavian-style benches. 1-1/8" dia. screw with single-lead Acme threads.
The threaded guide is mortised into the vise shoulder, while the end guide attaches to the vise jaw. 7-1/4" clamping capacity (less wooden shoulder thickness), 13" overall. Mounting screws included.
Made in Canada. Patented.
Lynx Quadrant Scraper Set
This Lynx Quadrant Scraper Set is the perfect solution for scraping various quadrant areas and has the benefit of the straight edge to get into corners, which sanding cannot always do.
This two piece set has the following quadrant sizes cut from the scraper:
Scraper 1 - 1/8", 3/16", 1/4", 5/16"
Scraper 2 - 3/8", 7/16", 1/2", 5/8"
These are pefect for...
Henry Taylor Woodcarving Punch - 2 x 2 Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Henry Taylor Woodcarving Punch - Cross 2
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Furniture Mouldings (1574 - 1820)
By E. J. Warne,
Originally published in 1923, this book contains 140 plates of full-size English furniture mouldings from the late 16th to early 19th century. There are over 500 detailed mouldings of bedsteads, cabinets, a bureau, shelves, a secretaire, clothes presses, wardrobes, chests, chairs, lace boxes, chests of drawers, stools, settees, seats, tables, sideboards, a dresser, knife cases, mirror...
Side Handle for the Lie-Nielsen No. 62 Low Angle Jack Plane
This powder-coated Aluminum 'Hot Dog' attaches to the side of the No. 62 Low Angle Jack Plane to make shooting more comfortable.
Tormek MSK-200 Stainless Steel Shaft for T3/T4
Tormek Stainless steel main shaft with Ezylock nut in composite. The EzyLock ensures that the grindstone is held securely with no danger of unwinding. Unique design requires no tools to mount or loosen the grindstone.
With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation...
''Family Tree of Chairs'' Letterpress Poster
The "Family Tree of Chairs" is an original piece of art made by Lee John Phillips of Wales that was first printed as the endpapers for "The Stick Chair Book" by Christopher Schwarz. The "Family Tree" shows the development of chair forms through the centuries – from a tree stump all the way to the more complex types, such as the high-style Chippendale chairs and a...
2'' Blade for Clifton No.4 & 5 Bench Plane
2'' blade to fit the Clifton No.4 smoothing plane, and the No.5 jack plane.
The Clifton bench plane blades are made from O1 steel that has been cryogenically treated to give a hardness of 60 to 62 Rockwell C. 3.6mm thick.
2'' (50mm) wide.
Made in Sheffield, UK
Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)
What's included.....
30 1/2" Saw Plate and 10" Kerfing Plane Plate. Blue Tempered 1095 Spring Steel. Hammer-set and sharpened by hand.
Two brackets (with kerf pre-cut), one of which is tapped for the 3/8" eye bolt.
3" x 3/8" eyebolt with jam nut.
Striker Plate with fastening screws.
Two U-bolts to secure plate to brackets.
''All you have to do is cut and form the wooden components.''
Blade for Veritas Flat & Round Spokeshaves
Replacement PM-V11 blade to fit both the Veritas Flat (05P3373) and Round (05P3374) Spokeshaves.
Carving the Traditional Greenman with Mary May
Variations of the Greenman motif are found in many cultures around the world. Often related to natural vegetative deities, the Greenman is a symbol of rebirth and the cycle of growth each spring. Mary May uses the Greenman project to demonstrate a variety of carving techniques, with special emphasis on carving facial features.
Mary May is a professional woodcarver in Charleston, SC, who specializes...
Flexcut Pro Series 1 3/8'' Detail Knife FP01
The 1 3/8'' Flexcut Pro Detail Knife features a narrowly tapered full flat grind wharncliffe blade in precision, heat treated 1095 steel, polished to a brilliant mirror finish.
This knife excels at precise detail carving work. The shorter blade length, slim profile, and narrower detail tip provides the highest level of precision and control.
Flexcut Whittlin' Jack JKN88
Designed for all outdoors people. The ultimate for portability. Whittlin' Jack features a 1½'' Detail Knife and a 2'' Roughing Knife.
It weighs in at just 3oz and is just over 4'' long when closed, so it neatly fits in your pocket.
Blades do not lock in place.
Gomtaro 300 Saw
The Silky Gomtaro is a traditional straight bladed pruning saw.
It is one of the most popular and longest standing Silky saws and is widely used by professionals and serious amateurs alike for the general pruning of medium to large size branches. We know it is also used by Kuksa makers!
Gomtaro saws have a teeth configuration of 8 teeth per 30mm for a smooth finish when cutting dryer and/or...
Gyokucho Blade for Compact Kataba Atsuba 180mm (293)
Replacement for the Gyokucho #293 saw
Hock High Carbon 8'' Chef's Knife Kit
A kit by Ron Hock to create a Chef's Knife with a 8" blade. 1/8" thick - sold without handles and include 3 steel pins.
General Info on the Hock Tools Knife Kits - The top quality, high carbon tool steel in these blades makes a superior cutting tool in the kitchen. While stainless cutlery can be handy nothing cuts better in the kitchen than high-carbon tool steel. This is O1 tool...
Journeyman Handcrafts Wool Lined Tool Roll
Keep your carving tools protected and portable with this Journeyman Handcrafts tool roll made from a two colours of 8oz waxed cotton canvas giving a lovely contrast of colour when rolled up. The tool roll is lined with a cream wool to give added protection to your tools.
This tool roll is made to last and will endure many years of hard use. It’s double stitched with a very strong bonded nylon...
Replacement PM-V11 Blade for the Veritas Shop Knife
Made of PM-V11 tool steel , this replacement blade for the Veritas Shop Knife is 3/32" thick and about 3/8" wide with a 55° spear-point tip. Ground to a keen edge at a 25° bevel angle.
Robert Sorby Full Round Scraper Cutter
The Robert Sorby Full Round Scraper Cutter is the perfect circular cutter for all general and large purpose hollow form turning. An incredible all rounder this cutter, like all full round cutters, provides the opportunity to rotate a couple of times to provide a clean sharp edge before it requires sharpening.
The perfect accompaniment for the Robert Sorby Hollowmaster the tool it was designed for...
Robert Sorby Tool Rest Adjustment Collar
The Robert Sorby Tool Rest Adjustment Collar allows easy height adjustments of your tool rest by up to 1/2" (13mm) without losing the set height when the locking handle is released. It features an outer adjustment ring for precise control and an Acetal seating disc for smooth operation. Available in stem sizes of 3/4", 1", 25mm, and 30mm, it's perfect for woodturners seeking flexibility...
