Sold Pre-owned and Second Hand Tools Archive: Page 6

Lie-Nielsen No. 4 1/2 - Smoothing Plane [Preowned, As New, SOLD]

Lie-Nielsen No. 4 1/2 - Smoothing Plane [Preowned, As New, SOLD]

Pre-owned, unused, as new. No box but Lie-Nielsen branded plane sack. Solidly built, this is the ultimate smoothing plane. It is longer, wider, and heavier than the No. 4, and its extra thick blade eliminates the possibility of chatter. Comes with a 45° frog as standard. Other frogs are available separately. 10-3/8" (264mm) long. 2-3/8" (60mm) blade. A2 steel. Iron body...

USD $447.12 excl tax, duties and fees

Lie-Nielsen - Cross Peen Hammer (Brass Head) [Preowned, SOLD]

Lie-Nielsen - Cross Peen Hammer (Brass Head) [Preowned, SOLD]

Pre-owned. G++ condition. Hickory handled. 12" overall. The head is 4" wide and weighs 4 ounces. Used for nailing tacks and making fine blade adjustments on your planes. This has been used and the head has been cleaned up a bit. It has some superficial stain marks, the head is solid (no wobble) so this hammer will work perfectly. The handle is excellent. Original box...

USD $91.61 excl tax, duties and fees

Lie-Nielsen - Cross Peen Hammer (Hardened A2 Steel Head) [Preowned, SOLD]

Lie-Nielsen - Cross Peen Hammer (Hardened A2 Steel Head) [Preowned, SOLD]

Pre-owned. G++ condition. Hickory handled. 12" overall. The head is 4" wide and weighs 4 ounces. Used for nailing tacks and making fine blade adjustments on your planes. This has been used and the head has been cleaned up a bit. It has some superficial stain marks, the head is solid (no wobble) so this hammer will work perfectly. The handle is excellent. Original box...

USD $91.61 excl tax, duties and fees

Lie-Nielsen - Cross Peen Hammer (A2 Steel Head) [Preowned, SOLD]

Lie-Nielsen - Cross Peen Hammer (A2 Steel Head) [Preowned, SOLD]

Pre-owned. G++ condition. Hickory handled. 12" overall. The head is 4" wide and weighs 4 ounces. Used for nailing tacks and making fine blade adjustments on your planes. This has been used and the head has been cleaned up a bit. It has some superficial stain marks, the head is solid (no wobble) so this hammer will work perfectly. The handle is excellent. Original box...

USD $91.61 excl tax, duties and fees

Sterling Toolworks - Plane Adjusting Hammer [Preowned, SOLD]

Sterling Toolworks - Plane Adjusting Hammer [Preowned, SOLD]

This is a commission sale. Pre-owned but hardly used in G++ condition. Note - this hammer comes with a spare "spud" in a Sterling Toolworks branded bag. This is what we say about the hammer on our website, where it sells new for £175: "The Sterling Tool Works Plane Adjustment Hammer is designed to be used to adjust plane blades and wooden plane wedges for wooden hand...

USD $163.58 excl tax, duties and fees

Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]

Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]

Made by Pfeil - Switzerland Unused - fine condition - a commission sale. These Pfeil Punches for wood are for creating background detail for your carvings. They are made from steel and weigh 540g each. They are housed in a wooden base. Size - 10mm x 10mm x 135mm each. These are the same set of puches as Classic Hand Tools sell in their Pfeil carving tools section for £170 (and...

USD $163.58 excl tax, duties and fees

Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New, SOLD]

Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New, SOLD]

Made by Pfeil - Switzerland These tools are very popular based on our experience in selling Pfeil carving tools for the last 15 years (but clearly not by our customer though, as he has never used them!). Precisely ground and polished. Pear handles, 70mm blade length, 125mm overall length. The set which is housed in a wooden stand includes: 1 straight chisel 8mm (L1-8); 1 skew...

USD $281.36 excl tax, duties and fees

Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New, SOLD]

Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New, SOLD]

This is a great value buy. These Henry Taylor incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. This set comprises the following gouges (if bought new from our site they would cost you £214) F11...

USD $214.62 excl tax, duties and fees

5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned, SOLD]

5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned, SOLD]

These are pre-owned - little used chisels with cosmetic staining to the steel blades. We have quickly cleaned them up and we think they will be absolutely fine for many years to come presenting a very affordable opportunity to get a good spread of bench chisels. 3/8", 1/2", 5/8", 1", 1 1/4" wide Boxwood round handles with brass ferrules (the largest one is split but it isn't working free and could...

USD $85.06 excl tax, duties and fees

Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New, SOLD]

Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New, SOLD]

Still in their original wrapping, this set comprises of 12 bevel edge chisels from the brand IYOROI in linen roll. 223mm in overall length. Red oak handles. Black finish to the blades with polished hollows. Black finish to striking hoops. Hollow ground backs with single flutes for all widths. Widths are as follows: 1.5, 3, 6, 9, 12,15,18, 21, 24, 30, 36 & 42mm. Denim tool...

USD $516.91 excl tax, duties and fees

Iyoroi Spearpoint 18mm Drawshave Chisel - Yari Kanna [Preowned, As New, SOLD]

Iyoroi Spearpoint 18mm Drawshave Chisel - Yari Kanna [Preowned, As New, SOLD]

Boxwood handle - unused. In fact whilst it looks like a chisel it is best described as a plane (kanna). These work by drawing the edge towards you. They are also described as a Japanese skew chisel that tapers to a point from 18mm. The length of the blade is 60mm with an overall length of 210mm Japanese Yari Kanna are unusual tools, descended from ancient Korean and Japanese bent chisels used...

USD $85.06 excl tax, duties and fees

Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New, SOLD]

Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New, SOLD]

Unused, as new. White paper tool steel and high carbon steel laminated blade with red oak handle and steel striking hoop. 240mm overall. 60mm blade. White paper steel (Shirogami in Japanese) is a carbon tool steel that is ideally suited to the production of chisels. It exhibits superior durability when compared to alloyed blue paper steels. Widely available in the UK for about £70...

USD $69.36 excl tax, duties and fees

Tormek Drill Bit Sharpening Attachment [Preowned, As New, SOLD]

Tormek Drill Bit Sharpening Attachment [Preowned, As New, SOLD]

Pre-owned - unused, as new. This is a commission sale. With the Tormek Drill Bits Sharpening Attachment you can sharpen your drill bits (3-22mm) with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape. See the video on the...

USD $281.36 excl tax, duties and fees

Clifton No.3 - Smoothing Plane [Preowned, SOLD]

Clifton No.3 - Smoothing Plane [Preowned, SOLD]

Pre-owned, a commission sale. This plane has seen little use and is in G++ condition with original box and packaging. This is the smallest smoothing plane Clifton make; ideal for those with smaller hands, or those with smaller jobs that don't require so much heft. Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment...

USD $320.62 excl tax, duties and fees

Veritas - Edge Trimming Plane (Left Hand) [Preowned, SOLD]

Veritas - Edge Trimming Plane (Left Hand) [Preowned, SOLD]

Pre-owned, a commission sale. This is what we and Lee Valley Tools say about the edge trimming plane "Edge-trimming planes are used for final trimming cuts on jointed boards to ensure smooth edges at exactly 90° to the face, and for working end grain. In many instances you will need only one model; the appropriate choice is often based on which of your hands is dominant. However, neither...

USD $176.67 excl tax, duties and fees

Veritas - Small Shoulder Plane - A' Blade [Preowned, SOLD]

Veritas - Small Shoulder Plane - A' Blade [Preowned, SOLD]

Pre-owned, a commission sale. This is what we and Lee Valley Tools say about the small shoulder plane... "Designed to seat nicely in the hand, the smallest Veritas shoulder plane is easily controlled using a one-handed grip. The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest...

USD $215.93 excl tax, duties and fees

Veritas No.112 - Large Scraping Plane [Preowned, SOLD]

Veritas No.112 - Large Scraping Plane [Preowned, SOLD]

Pre-owned, a commission sale. Original packaging, instruction leaflet and Veritas plane sack. This plane hasn't seen much work at all. G++ This is what we and Lee Valley Tools say about this large scraping plane.. "The Veritas® scraping plane is the ideal tool for final smoothing, especially when you have to deal with highly figured wood or reversing grain. With a well-sharpened...

USD $268.27 excl tax, duties and fees

Lie-Nielsen - Low Angle Smoothing Plane [Preowned, SOLD]

Lie-Nielsen - Low Angle Smoothing Plane [Preowned, SOLD]

Pre-owned, a commission sale. G++ condition. Very little use. Comes with branded plane sack. From our main Lie-Nielsen Section "The Low Angle Smoothing Plane is based on the rare Stanley 164, and is essentially a shorter version of the Low Angle Jack Plane - with an adjustable mouth, and a massive 2" (5.08cm) wide, 3/16" (4.7mm) thick blade, set at 12°. However, this tool is...

USD $386.05 excl tax, duties and fees

Lie-Nielsen No.60 1/2 - Low Angle Block Plane (Adjustable Mouth) [Preowned, SOLD]

Lie-Nielsen No.60 1/2 - Low Angle Block Plane (Adjustable Mouth) [Preowned, SOLD]

Pre-owned, a commission sale. From our main Lie-Nielsen Section "The Lie-Nielsen No 60½ Block Plane is based upon the old Stanley No 60½. This is a superb little block plane and should be in your tool kit, useful for all woodworking jobs in particular great for trimming end grain. The movable shoe in front of the blade allows you to easily adjust the mouth opening - fine mouth...

USD $229.01 excl tax, duties and fees

Blue Spruce Toolworks - 16oz Round-Headed Mallet [Preowned, SOLD]

Blue Spruce Toolworks - 16oz Round-Headed Mallet [Preowned, SOLD]

Infused curly maple head with an attractive beech handle. Brass ferrule. There are 3 or 4 minor dinks (2mm x 2mm) on the head (easily missed at first glance) and some superficial scratches consistent with just a few malet blows. This mallet has not been used much at all. We don't think this particular combination of handle/head is available currently.

USD $91.61 excl tax, duties and fees

Lie-Nielsen No.62 - Low Angle Jack Plane [Preowned, SOLD]

Lie-Nielsen No.62 - Low Angle Jack Plane [Preowned, SOLD]

This pre-owned plane has a few minor scratch marks on the sole but this plane has seen little use. No box but comes with a Lie-Nielsen branded plane sack. This is what we say about the plane in the main Lie-Nielsen section of our web site: ''The Lie-Nielsen No.62 Low Angle Jack Plane. What is not to like? You take the most popular and useful jack plane and bed it at a low angle (12°)....

USD $283.54 excl tax, duties and fees

Lie-Nielsen No.073 - Large Shoulder Plane [Preowned, SOLD]

Lie-Nielsen No.073 - Large Shoulder Plane [Preowned, SOLD]

Pre-owned in excellent condition with a branded plane sack. This description is from our main Lie-Nielsen section where this plane (without plane sack is normally available for £376 - but we are currently out of stock!) ''A versatile, general purpose shoulder plane with nice heft and the best size to start with. This all-metal shoulder plane is based on the Record 073, which in...

USD $321.71 excl tax, duties and fees

Lie-Nielsen No.7 - Joiner Plane [Preowned, As New, SOLD]

Lie-Nielsen No.7 - Joiner Plane [Preowned, As New, SOLD]

Pre-owned in fabulous condition, as new. ''The Lie-Nielsen No.7 Jointer Plane is a great plane for edge jointing and flattening larger areas. The late, great Alan Peters used his No.7 for pretty much everything, and today we still come across ex-students which still favour their jointer over any other plane.'' The equivalent of a later type Stanley Bedrock No.607 jointer plane. 22''...

USD $572.53 excl tax, duties and fees

Lie-Nielsen No.6 - Fore Plane [Preowned, As New, SOLD]

Lie-Nielsen No.6 - Fore Plane [Preowned, As New, SOLD]

Pre-owned in fabulous condition, as new. The Lie-Nielsen No.6 Fore Plane is sized midway between a Jack and a Jointer. The No.6 Fore Plane is designed to further true the surface after the Jack has sized it. Its length enables it to skim off high spots as it bridges low spots, delivering a levelled surface ready for the smoothing plane. 18" (457mm) long 2 3/8" (60mm) blade. A2...

USD $539.82 excl tax, duties and fees

Lie-Nielsen No.4 1/2 - Smoothing Plane [Preowned, As New, SOLD]

In fabulous condition, as new. "Solidly built, this is the ultimate smoothing plane. It is longer, wider, and heavier than the No. 4, and its extra thick blade eliminates the possibility of chatter. Comes with a 45° frog as standard. Other frogs are available separately. 10 3/8'' (264mm) long. 2 3/8'' (60mm) blade. A2 steel. Iron body 5½lbs (2.5kg).''

USD $430.76 excl tax, duties and fees

Martinez Signature Series 7075 - Metric Rapid Square (with base) [Preowned, SOLD]

Martinez Signature Series 7075 - Metric Rapid Square (with base) [Preowned, SOLD]

This is a commission sale. Used but in G++ condition. This US made roofing square with a 180mm metric blade designed for accuracy and durability. Made with aerospace grade aluminium, hard anodised, this square is light and strong with very, easy to read measurements. The base (or heel) is anodised aluminium in red (no level) providing a reliable base that improves control and precision in marking...

USD $115.16 excl tax, duties and fees

Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned, SOLD]

Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned, SOLD]

This is a commission sale. Used but in G++ condition 3/8” straight blade. Reversible curved/straight detachable fence. Instruction leaflet. This is our description from our LN section… “A router plane is a great tool for working shallow mortices - hinge gains, inlay, door locks, trimming tenons and the like. Lie-Nielsen's version is based on an early Stanley...

USD $215.93 excl tax, duties and fees

Lie-Nielsen No.042 - Medium Shoulder Plane [Preowned, SOLD]

Lie-Nielsen No.042 - Medium Shoulder Plane [Preowned, SOLD]

Pre-owned, this is a commission sale. G++, little used condition Just a few surface scratches to the body. Full blade. Instruction leaflet included. This description of the plane is from the Lie-Nielsen planes section of our web site where this plane is available new for £329. ''An improved version of the now discontinued Record 042. This plane is 3/4'' wide and...

USD $268.27 excl tax, duties and fees

Lie-Nielsen - Boggs Spokeshave (Curved) [Preowned, SOLD]

Lie-Nielsen - Boggs Spokeshave (Curved) [Preowned, SOLD]

Pre-owned, used. G++ condition. A commission sale. Note: the curve on this spokeshave is extremely shallow. The Boggs Spokeshave is hefty and solid, weighing 12oz. Designed for fine, precise shaping in all woods. Body is 10" long with a 1" wide very slightly curved sole. The sole of this spokeshave has a gentle (almost imperceptible) 5 degree radius for working inside curves. 2"...

USD $229.01 excl tax, duties and fees

Lie-Nielsen - Boggs Spokeshave (Flat) [Preowned, SOLD]

Lie-Nielsen - Boggs Spokeshave (Flat) [Preowned, SOLD]

Pre-owned, used G++. A commission sale. The original Boggs Spokeshave is hefty and solid, weighing 12 oz. Designed for fine, precise shaping in all woods. Body is 10" long with a 1" wide flat sole. 2" wide x 1/8" thick A2 blade. Bronze body and cap. Hickory handles. Weight is 12 oz. Instruction leaflet and scruffy original box. This spokeshave hasn’t...

USD $189.75 excl tax, duties and fees

Claire Minihan - Walnut & Brass Travisher [Preowned, SOLD]

Claire Minihan - Walnut & Brass Travisher [Preowned, SOLD]

Pre-owned, a commission sale. Unusually for us we were unaware of Claire Minihan as a tool maker but we are glad to be offering one of her travishers for sale. A bit of research informs us that her travishers are a favourite with the likes of Peter Galbert USA (“she makes the best travishers in the world”). In 2024 she was offering this travisher for about $500 but you would have to wait well...

USD $307.53 excl tax, duties and fees

Lie-Nielsen SD-9 - Honing Guide Screwdriver (Curly Maple Handle) [Preowned, SOLD]

This is designed for the Lie-Nielsen honing guide. Pre-owned in new condition F (Fine). A commission sale.

USD $54.96 excl tax, duties and fees

Lie-Nielsen SD-7 - Frog Screwdriver (Curly Maple Handle) [Preowned, SOLD]

Lie-Nielsen SD-7 - Frog Screwdriver (Curly Maple Handle) [Preowned, SOLD]

This is for the Small Handle Nut and for adjusting the frog. Pre-owned in new condition F (Fine). A commission sale.

USD $54.96 excl tax, duties and fees

Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned, SOLD]

Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned, SOLD]

Pre-owned – a commission sale 4, 5, 6, 7 ,8 & 10mm blades come with this plane which has been lightly used. Original packaging (the box is a bit tatty) and Instruction booklet. The condition of the plane and blades is Good ++ (G++) which indicates it is not new, but has been well cared for and has no defects over and above superficial cosmetic blemishes. “Closest in size...

USD $250.82 excl tax, duties and fees

Bad Axe Toolworks - D8 Panel Saw [Preowned, SOLD]

Bad Axe Toolworks - D8 Panel Saw [Preowned, SOLD]

A beauty and a steal. Pre-owned, commission sale. G++ condition – superficial wear marks only. The D8 is dubbed by Bad Axe Tool Works as the 'Henry Disston' in honour of the legendary saw maker himself. The Bad Axe D8 features a meticulously tapered grind achieved through advanced grinding techniques, ensuring a strong, agile blade that performs reliably under pressure. ergonomic...

USD $359.88 excl tax, duties and fees

Bad Axe Toolworks – 14'' Hybrid Tenon Saw [Preowned, SOLD]

Bad Axe Toolworks – 14'' Hybrid Tenon Saw [Preowned, SOLD]

Pre-owned, commission sale. G++ condition –We have given this a very light clean and many of the usual grubby spots that always accumulate have disappeared but some remain with some scratches. Closed maple handle with brass nuts. The saw blade depth is 3 3/8” The saw back is black oxidised steel. 11 ppi

USD $242.10 excl tax, duties and fees

5 Tasai Bench Chisels [Preowned, SOLD]

These are pre-owned bevel edged bench chisels from the forge of master blacksmith Akio Tasai in Japan. A commission sale. They have been used very sparingly; the hoops have been struck and there are burrs to be attended to in order to safeguard your fingers but that is a quick and easy job. The chisels and box are in G++ condition. Laminated steel with single hollows. The cutting edge is blue...

USD $1,030.56 excl tax, duties and fees

Lie-Nielsen – Pair of 1/2'' Skew Chisels [Preowned, SOLD]

Lie-Nielsen – Pair of 1/2'' Skew Chisels [Preowned, SOLD]

Pre-owned but still with the wax on the ends. A commission sale. These skew chisels are not currently offered by Lie-Nielsen so this is a rare opportunity to purchase. No box.

USD $327.16 excl tax, duties and fees

Lie-Nielsen – 3/8'' Corner Chisels [Preowned, SOLD]

Lie-Nielsen – 3/8'' Corner Chisels [Preowned, SOLD]

Pre-owned but unused. A commission sale. Producing square mortises is exacting work. The Corner Chisel, used after the mortise has been roughed out by hand or with a slot mortiser—which produces round edged mortises—helps square corners easily and precisely. Made from A2 Tool Steel, hardened to RC 60-62 and ground razor sharp. Bevelled at 30º. Overall length is approximately 10". No box.

USD $163.58 excl tax, duties and fees

Lie-Nielsen No.97 1/2 - Small Chisel Plane [Preowned, SOLD]

Lie-Nielsen No.97 1/2 - Small Chisel Plane [Preowned, SOLD]

Pre-owned but we think this plane is unused. A commission sale. The Lie-Nielsen Chisel Plane is the perfect little tool 175mm x 45mm (6 1/2" x 1 3/4") for removing glue and trimming dowel plugs. It is very useful for working into corners and to the ends of rebates. The heavy 4.8mm - 3/16" A2 thick blade is set at 12 degrees. The blade is as new. You adjust the depth of the cut...

USD $229.01 excl tax, duties and fees

Lie-Nielsen No.5 1/2 - Jack plane (with extra Frog) [Preowned, SOLD]

Lie-Nielsen No.5 1/2 - Jack plane (with extra Frog) [Preowned, SOLD]

A commission sale. Used with some wear marks and some cosmetic stain / surface rust marks (which have been cleaned and oiled). So, this is a user grade plane, the sole of the plane is good. Don’t buy if you cant ignore the visual distractions. This plane has been used and will offer a lifetime of use yet. It is priced accordingly. The plane is fitted with a 50 degree frog but is also...

USD $516.91 excl tax, duties and fees

Lie-Nielsen - Pair of Preston-style Bronze Spokeshaves [Preowned, SOLD]

Lie-Nielsen - Pair of Preston-style Bronze Spokeshaves [Preowned, SOLD]

Lovely flat and curved faced, small "Edward Preston" style spokeshaves each with its own leather Lie-Nielsen leather pouch. We don't think these spokeshaves have been used. Note - The pair, brand new, without the leather wallets would currently set you back £345 on our website so effectively the leather wallets are for free. A commission sale.

USD $451.48 excl tax, duties and fees

Lie-Nielsen No.4 - Bronze Smoothing Plane [Preowned, SOLD]

Lie-Nielsen No.4 - Bronze Smoothing Plane [Preowned, SOLD]

A commission sale. Pre-owned and used but well cared for, We have given this plane a quick clean so it looks quite shiny and new. We cleaned it to rid it of some staining marks which have mostly disappeared. Scratch marks on the sole, consistent with use remain. This is what we say about the brand-new version on our main LN section. “Lie-Nielsen's smoothing planes are precision...

USD $556.17 excl tax, duties and fees

Blue Spruce Toolworks - 16oz. Round Mallet [Preowned, SOLD]

Blue Spruce Toolworks - 16oz. Round Mallet [Preowned, SOLD]

Pre-owned - a commission sale on behalf of our customer. Almost as new, save for a very small dink at the base of the handle. Virtually unused. Beautifully figured resin impregnated maple head with African blackwood. This is a extract from our Blue Spruce section where this mallet retails for £148 ''Blue Spruce Round Mallets feature a maple head infused with a tough polymer...

USD $157.04 excl tax, duties and fees

Lie-Nielsen - Dovetail Marker [Preowned, SOLD]

Lie-Nielsen - Dovetail Marker [Preowned, SOLD]

Hardly used. Cleaned by us to rid it of some age staining. This is a discontinued offering from Lie-Nielsen. Boxed (the box is in G+ condition). This brass and rosewood dovetail maker was a great seller back in the day. A commission sale.

USD $58.89 excl tax, duties and fees

Lie-Nielsen - Dovetail Saw [Preowned, SOLD]

Lie-Nielsen - Dovetail Saw [Preowned, SOLD]

Pre-owned with a few dinks and minor scratches/staining marks. 15ppi Rip cut Lie-Nielsen dovetail saw – 9” blade. This has been used but has a lot of life left to cut several hundred more dovetails. A commission sale.

USD $150.49 excl tax, duties and fees