Sold Pre-owned and Second Hand Tools Archive: Page 3

Stonemasons Firesharp Chisels – 10 widths [Clearance, SOLD]

Stonemasons Firesharp Chisels – 10 widths [Clearance, SOLD]

10 double-hooped strong-as-an-ox stone masonry chisels made in France by Forge de Saint Juery home of Auriou Tool Works. Widths: 10, 15, 25, 30, 35 ,40, 45, 50, 55 & 60mm. 270mm overall length. New old stock. These wooden handled chisels are ideal for softer stone including alabaster, limestone and soapstone. When they are gone, they are gone! 3 sets available – you...

£240.00 inc VAT

3 French Drags – Quality Stone Masons Tools [Clearance, SOLD]

3 French Drags – Quality Stone Masons Tools [Clearance, SOLD]

French drags are the equivalent of the plane in woodworking. They are used for soft stone and consist of 9 blades set at skewed angles over the length of a block of wood. 2 of these drags have toothed blades (straight and circular) to allow removal of surface material. The 3rd drag (30mm width) has toothless blades for smoothing out the surface of the stone. These 3 drags have the same overall...

£85.00 inc VAT

Lie-Nielsen Toolworks Dovetail Marker [Preowned, SOLD]

Lie-Nielsen Toolworks Dovetail Marker [Preowned, SOLD]

This brass and rosewood dovetail maker from Lie-Nielsen Toolworks was a popular item back in the day before being discontinued. It seems to be even more popular now! We have sold several over the last 6 months and no doubt this will fly off the shelf. It has no box, has been lightly cleaned and is in very good condition.

£75.00 inc VAT

Lie Nielsen Toolworks – Bronze No. 4 Smoothing Plane [Preowned, SOLD]

Lie Nielsen Toolworks – Bronze No. 4 Smoothing Plane [Preowned, SOLD]

This is a pre-owned bronze LN No.4 in good ++ (G++) condition. Look here to see what we say about the brand-new version (which retails for £595) on our main LN section. This Lie-Nielsen's smoothing plane has a manganese bronze casting and has a beautifully formed handle and knob. It has the Stanley Bedrock style frog which gives a fully machined mating fit between the frog and body....

£445.00 inc VAT

Record 405 Multiplane [Preowned, SOLD]

This plane has seen very little use at all and presents as almost new. It has its fitted box with wallet containing 24 cutters and instruction booklet. The cutters: 4, 6, 9 & 12mm plus 1/8'', 3/16'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 5/8'', 3/4'' & 7/8'' Plough & Dado cutters. 1/8'',...

£185.00 inc VAT

Record No.7 Jointer Plane (with Clifton Hand forged blade & 2 piece cap iron) [Preowned, SOLD]

Record No.7 Jointer Plane (with Clifton Hand forged blade & 2 piece cap iron) [Preowned, SOLD]

Pre-owned but in superb condition this plane has the considerable advantage of having been fitted with a Clifton hand forged blade and 2 piece cap iron. This plane has done very little planing. 21” overall with 2 3/8” wide blade. Stained beech handles. This plane is quite recent. Made in England.

£115.00 inc VAT

4 Ray Iles Mortise Chisels [Preowned, SOLD]

4 Ray Iles Mortise Chisels [Preowned, SOLD]

Very little used these are very well made mortise chisels by legendary English tool maker Ray Iles. These do not find their way on the market very often as they are not any easy tool to make and Ray tends to send his production to Tools for Working Wood in the USA. So, these tools have been sparingly used. The beech handles are slightly rounded at the butt (by special request) to make them more...

£360.00 (VAT exempt)

No.9 Mitre Plane - Lie-Nielsen Toolworks [Preowned, SOLD]

No.9 Mitre Plane - Lie-Nielsen Toolworks [Preowned, SOLD]

Pre-owned and used sparingly. This is the iron bodied version with the side handle. Later models had the option of a "hot dog" attachment which would still work with this model if you thought you needed it although this bad boy maybe heading to a collector. This discontinued beauty has marks of use. The sole is 90-95% free of any marks as are the side faces. This is not pristine,...

£625.00 inc VAT

2 Good Oval Handled Mortise Chisels 3/16'' & 3/8'' [Vintage, SOLD]

These would be termed vintage. In fact, these 2 were made centuries ago! They are great tools with original handles (in good but slightly grubby condition which can easily be rectified with a bit of wax and elbow grease). The chisels are not heavily used and will give a few decades of service. These legendary Sheffiled toolmaking companies made these mortise chisels between the times stated. 3/16''...

£115.00 inc VAT

7 Pneumatic Stone Carving Tools - Auriou [Clearance, SOLD]

7 Pneumatic Stone Carving Tools - Auriou [Clearance, SOLD]

Yes! The blacksmiths at legendary French artisan tool makers AURIOU TOOLWORKS also used to make tools for stone sculptors who use air powered chisels for their work. A bit noisy for us (and them maybe because they have stopped making them!) We have 3 gouges: 10mm wide, 15mm wide and 20mm wide. Also 2 snakes tongue (pied a biche) tools - for heavy shaping work (10 & 15mm wide) And 2 point...

£100.00 inc VAT

Lie-Nielsen Toolworks Dovetail Marker [Preowned, SOLD]

This brass and rosewood dovetail maker from Lie-Nielsen Toolworks was a popular item back in the day before being discontinued. This is little used and has its original box with instruction leaflet.. A commission sale.

£75.00 (VAT exempt)

Woodworking Starter Set [Preowned, SOLD]

Woodworking Starter Set [Preowned, SOLD]

Get yourself (or someone else started!) A Brass & Rosewood mortise gauge A Brass and rosewood 4'' square (Crown Tools) A Brass and rosewood 8'' bevel with lever lock. 3 bevel edged chisels: 3/8'' Marples 5/8'' Marples 1/2'' Ashley Iles A Record 4½ smoothing plane – that has seen little, if any, use. Stained beech...

£135.00 (VAT exempt)

Incra Stainless Steel Metric Rule Set [Preowned, SOLD]

Incra Stainless Steel Metric Rule Set [Preowned, SOLD]

300mm, 150mm & 75mm long. These super slim Incra rules are extremely precise measuring aids as they have holes for precise marking allowing accuracy to 0.25mm In almost new condition. You’ll need a 0.5mm diameter lead in your pencil to fit the holes.

£30.00 inc VAT

Ulmia Layout Tools from Germany [Clearance, SOLD]

Ulmia Layout Tools from Germany [Clearance, SOLD]

We bought these in as samples to have a good look alongside the fantastic new range of squares and precision bevels we are now selling from ULMIA . New Ulmia Squares & Bevels Made from white beech these are a throwback to the days of basic wooden measuring tools and they are very nicely made indeed. 15cm square & a 33cm bevel with excellent locking finger nut. New - unused.

£33.00 inc VAT

Vintage Squares [Preowned, SOLD]

All squared up? A selection of attractive vintage squares – all in G+ - G++ condition They probably aren’t super accurate, but they will be good enough for most DIY tasks should you chose to use them. However, cleaning these up (which we haven’t had time to do) will release the beauty of the wood and make the brass glisten like gold. A little bit of wire wool (medium) some...

£30.00 inc VAT

Stanley No.5 1/2 Jack Plane [Preowned, SOLD]

Stanley No.5 1/2 Jack Plane [Preowned, SOLD]

Pre-owned in G++ condition. Attractive rosewood handles. A good user plane that has been well looked after. A commission sale.

£75.00 (VAT exempt)

Bespoke E. Garlick & Sons Lynx 14'' Tenon Rip Saw [Preowned, SOLD]

Bespoke E. Garlick & Sons Lynx 14'' Tenon Rip Saw [Preowned, SOLD]

A bespoke made rip cut 11tpi tenon saw with lovely walnut handle. This saw was made by Thomas Flinn & Co., saw and tool makers in Sheffield, England. This closed walnut handled LYNX tenon saw is 14'' (350mm) long. This heavy brass backed tenon saw is in G++ condition having been well cared for during its use. The steel plate is 3 1/8'' deep, a heavy brass back with...

£85.00 (VAT exempt)

Karl Holtey 2 1/8'' Plane Blade [Clearance, SOLD]

Karl Holtey 2 1/8'' Plane Blade [Clearance, SOLD]

Unused old stock. Stamped HOLTEY. Also stamped “s”. 4” overall. 2 1/8” wide. 3/16” thick. 4 positioning holes.

£40.00 inc VAT

Karl Holtey 2 1/4'' Plane Blade [Clearance, SOLD]

Karl Holtey 2 1/4'' Plane Blade [Clearance, SOLD]

Unused old stock. Stamped HOLTEY. Also stamped “2”. 9 1/8” overall. 2 ¼” wide. 3/16” thick. 7 positioning holes.

£60.00 inc VAT

EIGHT Henry Taylor Straight Carving Gouges [Clearance, SOLD]

EIGHT Henry Taylor Straight Carving Gouges [Clearance, SOLD]

New current stock - a straight carving gouge bundle! Ok – we overstocked through our enthusiasm to promote this great British brand and then Henry Taylor slimmed down their overall offering of carving tools, so we decided to concentrate our future investment in woodcarving hand tools in Swiss maker Pfeil and USA maker Flexcut. No crying here but we are trying to get these remaining new tools...

£160.00 inc VAT

SEVEN Henry Taylor Straight Fishtail Gouges [Clearance, SOLD]

SEVEN Henry Taylor Straight Fishtail Gouges [Clearance, SOLD]

New current stock. A fishtail bundle! Ok – so this is excess stock created through our enthusiasm to promote this great British brand a few years back. We still love these Henry Taylor carving tools but when HT slimmed down their overall offering, we were holding quite a lot (hundreds!) of carving tools. At that point we decided to concentrate our future investment in woodcarving hand tools...

£138.00 inc VAT

Paring chisels – 4 lovelies [Vintage, SOLD]

Paring chisels – 4 lovelies [Vintage, SOLD]

Well looked after vintage paring chisels all with brass ferrules. Some bashing to the handles (crack to the largest size and a split to the 1” chisel but they are functional and fit for good use) Marples & Sons, Sheffield - 15 1/2” (390mm) overall – 8” (200mm) blade – 1 ¼” (32mm) wide bevel edge paring chisel Hearnshaw Brothers, Sheffield...

£84.00 inc VAT

Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]

Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]

This plane has seen good service for many decades and remains in good condition. The original Stanley Sweetheart blade has worn down to the last 3/4'' so we have fitted a 2 3/8'' HOCK A2 cyro replacement iron for you (the original iron will also come with the plane) Patent dates of MAR 25 - 02 AUG 19- 02 APR 19 – 10 Lovely rosewood handles.

£125.00 inc VAT

Eclipse No.34 Butt Gauge [Vintage, SOLD]

Eclipse No.34 Butt Gauge [Vintage, SOLD]

Good condition, clear markings, and all works freely. Imperial and metric markings.

£15.00 inc VAT

Very Attractive Ebony & Brass Cutting Gauge [Vintage, SOLD]

Very Attractive Ebony & Brass Cutting Gauge [Vintage, SOLD]

A very attractive cutting gauge with ebony stem and full brass faced ebony fence. G++ condition. We have given this a very light clean, it will polish beautifully but we like the patina so we haven’t gone to town on this! The locking off screw is housed within a brass brass escutcheon. The cutting knife is held in place with a brass wedge. Very nice to handle, it locks firmly...

£65.00 inc VAT

1/2'' Lock Mortise Chisel [Vintage, SOLD]

1/2'' Lock Mortise Chisel [Vintage, SOLD]

A nice, socketed lock 1/2" wide mortise chisel with oak handle. 21” overall. No markers mark. Very good condition.

£20.00 inc VAT

7 Excellent Paring Gouges – Marples & Ibbotson [Vintage, SOLD]

7 Excellent Paring Gouges – Marples & Ibbotson [Vintage, SOLD]

Featuring famous makers from Sheffield, England - William Marples & Sons (5 of the 7) and Thomas Ibbotson (2). Did you know that Marples acquired Thomas Ibbotsons assets in 1905? – nor did we! A mix of long paring gouges with different handle styles and wood species, all with ferrules and virtually no defects (just one very short crack in one handle). A very tactile bunch of gouges. Overall...

£60.00 inc VAT

Set of 4 Odate Crowning Plates & an Odate Dressing Plate [Preowned, SOLD]

Set of 4 Odate Crowning Plates & an Odate Dressing Plate [Preowned, SOLD]

This set of plates is from David Charlesworth workshop in North Devon at Hartland, Devon, England (see the new film featuring Gillian Anderson & Jason Isaacs called THE SALT PATH for an idea of where David lived if you have never been to Hartland). So, David will have used these (probably for testing and review for an article). The plates have not been heavily used in our opinion but are pre-owned...

£385.00 inc VAT

Sash Pocket Chisel [Vintage, SOLD]

10 ½" overall, 1 1/2" wide, with 3 1/2" long blade. Original handle with brass ferrule and leather washer. Sash pocket chisels are medium length chisels designed to cut the 'pocket piece' in the side of the frame of a sash sliding window. This pocket piece is the removeable wooden 'window' to enable access into the space at each side of sash windows where...

£28.00 inc VAT

This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]

This has the Wow Factor - Heavy Duty Chisel! [Vintage, SOLD]

This beauty dates from the 2nd World War and was of government issue. The arrow stamped in the blade is the giveaway sign for this. It is 14 1/2" long overall (about 365mm) and 2 1/2" wide (58mm) It has the original very attractive handle which is in great condition. There are many years of use left in this super chisel which tapers along its length from 1/4" to 1/8"...

£65.00 inc VAT

Record 077A Bullnose & Chisel Plane [Vintage, SOLD]

Record 077A Bullnose & Chisel Plane [Vintage, SOLD]

This is great alternative to buying a new plane if your budget is constrained. G++ condition, good blade (3/4") remaining. The front nose will detach so you can use this as a chisel plane. The blade is 1 1/8" wide. This excellent site will give you further information

£45.00 inc VAT

Gunmetal Shoulder Rebate Plane with Lovely Ebony infill and wedge [Vintage, SOLD]

Gunmetal Shoulder Rebate Plane with Lovely Ebony infill and wedge [Vintage, SOLD]

This is a little cutey measuring 5'' X 2'' high x 1'' wide (excluding the wedge and blade) No makers mark and we think this is owner made (T SHARP stamped on the wedge). The mouth requires a tiny filing to bring it to square. The infill and wedge are very well done. Good iron with 3/4'' remaining. We haven't cleaned this as we don't like buffing old...

£72.00 inc VAT

Record 722 Small Router Plane [Vintage, SOLD]

Record 722 Small Router Plane [Vintage, SOLD]

This webpage will tell you more about this little English router plane: Record 722 Router Plane One 1/4" straight blade. No box.

£36.00 inc VAT

Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]

Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]

In mint condition. This is a commission sale for a perfectly looked after unused plane. Quite a few of these planes, whether Stanley or Record are in circulation on Ebay and the like, but the buyer must be very wary as often these planes have had a hard life, particularly the vintage planes (the rivets on the sole near the mouth loosen and cracks can develop in the castings). No such fears here...

£185.00 (VAT exempt)

5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]

5 Vintage Boxwood London Pattern handled gouges by Robert Sorby [Preowned, SOLD]

4 of these gouges have matching London pattern boxwood handles (the smallest has a 1'' split near the brass ferrule). The shorter gouges are ½'', ¾'', 1'' & 1 ½'' wide with a medium sweep. The blade lengths vary from 4'' (100mm) – 5'' (125mm). The 5th gouge has a very slightly different London pattern boxwood...

£150.00 (VAT exempt)

Lie-Nielsen No.4 – Bronze Smoothing Plane [Preowned, As New, SOLD]

Lie-Nielsen No.4 – Bronze Smoothing Plane [Preowned, As New, SOLD]

Pre-owned in as new condition with LN plane sack. This is out of stock in our Lie-Nielsen plane section where it retails for £595. It is a popular plane. Hopefully we will be getting fresh stock during the summer. This is what we say about the brand-new version on our main LN section. “Lie-Nielsen's smoothing planes are precision machined from a manganese bronze casting, or...

£495.00 inc VAT

DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned, SOLD]

DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned, SOLD]

That’s DC for David Charlesworth of Hartland, Devon, England. This marking knife hasn’t left it’s packaging so is new, unused stock. These marking knives were made to David’s specification by (almost a rock star) Phil Edwards of Philly Planes fame

£45.00 inc VAT

Mappa Toolworks Mallet [Preowned, As New, SOLD]

Mappa Toolworks Mallet [Preowned, As New, SOLD]

A commission sale. As new, unused. This has a lovely blackwood handle with an infused maple head. It weighs 650g Overall height of 215mm with a 90mm deep head, 60mm diameter. Mappa (Netherlands) didn’t really get going as a tool making concern. 2 great hand tool enthusiasts got too busy with life, work and other distractions to build their portfolio of tools (where is that travisher boys??)...

£95.00 (VAT exempt)

Hans Karlsson Short Handled 60mm Adze [Preowned, As New, SOLD]

Hans Karlsson Short Handled 60mm Adze [Preowned, As New, SOLD]

These adzes are always in great demand but with a very limited production run. These famous Swedish made adzes are not so easy to get hold of (they seem to be sold out everywhere!). This example is a commission sale from a customer who has never used the adze, it is in “as new” condition, complete with a protective leather sheath. This 2 3/8” (about 60mm) wide cutting edge has...

£285.00 (VAT exempt)

Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]

Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]

They may look a bit scruffy but in fact that is just dried oil in the photos which disguises tools in G++ condition with full blades and nice rosewood knobs. This pair will clean up nicely. Patent date of Jan 95 (that will be 1895!).

£138.00 inc VAT

4 Small Beech Rebate Planes [Preowned, SOLD]

4 Small Beech Rebate Planes [Preowned, SOLD]

All with the same owners stamp C Gibson. Convex from front to toe. 4 1/8” long C NURSE & CO. LONDON (owners stamp R. Gibson) Boat shaped sole. 4 ½” long. NURSE (C Gibson) Straight rebate. 4 ½” long. NURSE (C Gibson) Rounded sole. 4” long. (R. Gibson) All the wedges and irons are in g++ condition. It is a sweet collection. We have given...

£60.00 inc VAT

3 Vintage Mortise Chisels [Vintage, SOLD]

3 Vintage Mortise Chisels [Vintage, SOLD]

These beauties (2 stamped BUCK and the larger one stamped I & H SORBY) I & H SORBY – octagonal handle – ½” wide BUCK – oval handle 3/16” wide BUCK – oval handle 3/8” wide Great condition. 11 1/2” - 12 ¼” overall length.

£72.00 inc VAT

Convex Beech Plane (with Adjustable Front Boxwood Depth Stop) [Preowned, SOLD]

Convex Beech Plane (with Adjustable Front Boxwood Depth Stop) [Preowned, SOLD]

The 2 ¼” wide iron is by Buck Owners stamp C Gibson

£24.00 inc VAT

9'' Straight Drawknife by Marsden Brothers [Preowned, SOLD]

9'' Straight Drawknife by Marsden Brothers [Preowned, SOLD]

Beech handles with brass ferules. This is a lovely drawknife which will serve you well for many a chair leg. The makers stamp is a little indistinct but it is Marsden Brothers. Owner’s stamp of C GIBSON

£58.00 inc VAT

Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned, SOLD]

Sanderson Hardware – Cotter Pin Ring Pull in Brass (x2) [Preowned, SOLD]

This is old stock from the early days of starting up Classic Hand Tools. Sanderson Hardware are still going in California. (Note - these cotter pins are different to what they offer now). The diameter of the ring pull is 3/4". The rod stock is 1/8" diameter and 2 1/4” ong . The square plate is ¾” x 5/8” with 4 screw holes (screws provided). The plate has...

£10.00 inc VAT

6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]

6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]

Six, unused Jorgensen hand screws. As new. A commission sale. From the manufacturer's website... "Seasoned, straight-grain hard maple wood jaws marry with cold drawn steel-spindles and nuts with special double-lead threads. Together they create a handscrew clamp that holds tightly over broad areas, providing greater reach and a wider distribution of pressure than other clamps. The angle...

£180.00 (VAT exempt)

Philip Marcou - Smoothing Plane [Preowned, SOLD]

Philip Marcou - Smoothing Plane [Preowned, SOLD]

Offers are invited in the region of £2500 for this fabulous plane. Email sales@classichandtools.com or call 01473 784983 to discuss

£2,500.00 (VAT exempt)

5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned, SOLD]

5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned, SOLD]

These 10 planes are all in G++ condition. We haven’t cleaned them up, but they will clean up beautifully. The wedges are all fine and the blades are working well. The planes are all stamped with the same owner’s stamp "C GIBSON" They came out of a joiner’s chest with some other tools featured in this week’s Fridays Finds. Pairs of No. 2, 4, 10, 12 &...

£88.00 inc VAT

Friday Finds Sold Archive: Page 3

Classic Hand Tools

Customer Service

Friday Finds Sold Archive: Page 3

Brand

Collection

Price

Additional Filters

Sort By

Per Page

View