Brand
Price
Additional Filters
318 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Lie-Nielsen Mortise Chisels - Set of 5 with Leather Roll [Preowned, Unused, SOLD]Lie-Nielsen Mortise Chisels - Set of 5 with Leather Roll [Preowned, Unused, SOLD]
Sold
Lie-Nielsen Mortise Chisels - Set of 5 with Leather Roll [Preowned, Unused, SOLD]
Over £750 pounds worth selling for a great price - we can't belive these haven't been snapped up! These mortise chisels are pre-owned but unused. A Lie-Nielsen branded 7 pocket tool roll houses these 5 unused Lie-Nielsen mortise chisels. The tool roll has a few minor cosmetic small stains which will clean off (no tears, rips or damage). Chisels sizes - 3/16'', 1/4'',...
£595.00 (VAT exempt)
10 Lie-Nielsen Chisels (with Afrcian Blackwood Handles) [Preowned, Unused, SOLD]10 Lie-Nielsen Chisels (with Afrcian Blackwood Handles) [Preowned, Unused, SOLD]
Sold
10 Lie-Nielsen Chisels (with Afrcian Blackwood Handles) [Preowned, Unused, SOLD]
Pre-owned, about 12 years old but unused. A commission sale. 10 bevel edge chisels by Lie-Nielsen Toolworks with specially commissioned African Blackwood handles made by Blue Spruce Toolworks. These beauties are possibly a unique combination. This is a commission sale on behalf of a great customer of ours who feels they should go to a good home where someone will put them to good use. All...
£1,800.00 (VAT exempt)
Blue Spruce Toolworks - Marking Knives & Awl Set (with African Blackwood Handles) [Preowned, SOLD]Blue Spruce Toolworks - Marking Knives & Awl Set (with African Blackwood Handles) [Preowned, SOLD]
Sold
Blue Spruce Toolworks - Marking Knives & Awl Set (with African Blackwood Handles) [Preowned, SOLD]
These are the earlier made marking knives and awl with fixed blades/point into brass ferrules with beautifully turned African blackwood handles. Large marking knife Small Marking Knife Small awl. In the original Blue Spruce Box. Seemingly unused. A commission sale.
£285.00 (VAT exempt)
Blue Spruce Toolworks Ultimate Coping Saw [Preowned, Unused, SOLD]Blue Spruce Toolworks Ultimate Coping Saw [Preowned, Unused, SOLD]
Sold
Blue Spruce Toolworks Ultimate Coping Saw [Preowned, Unused, SOLD]
A lightweight maple handled 3" throat coping saw with 8 possible lockable settings for your blade or you can unlock the thumbwheels so the blade, blade clamps and sleeves rotate freely while cutting. This saw also has the adaptors to house pin-less saw blades. 3 blades included. Here is what Blue Spruce Toolworks say about the saw... "Coping saws have always had a dilemma. Curved...
£250.00 (VAT exempt)
Veritas Medium Router Plane - 1/4'' blade [Preowned, SOLD]Veritas Medium Router Plane - 1/4'' blade [Preowned, SOLD]
Sold
Veritas Medium Router Plane - 1/4'' blade [Preowned, SOLD]
Slightly larger than the Veritas small router plane, this tool has the advantage of using the same blades as Veritas' full-size router planes. For general use, the blade may be positioned inboard with the sole encircling it for maximum registration on the workpiece, even when approaching from the side or working an edge. This allows it to bridge recesses, providing great stability even on narrow...
£120.00 (VAT exempt)
Blue Spruce Toolworks Optima Chisel Plane (Straight blade - Rosewood Tote) [Preowned, Unused, SOLD]Blue Spruce Toolworks Optima Chisel Plane (Straight blade - Rosewood Tote) [Preowned, Unused, SOLD]
Sold
Blue Spruce Toolworks Optima Chisel Plane (Straight blade - Rosewood Tote) [Preowned, Unused, SOLD]
This is not the standard Blue Spruce chisel plane with the straight blade and resin infused maple tote, this one has a darker tote, probably rosewood. All original. "Reach for it anytime you need to trim plugs, end grain, pare away joinery surfaces, clean glue squeeze-out, and more. It thrives in wide-open plywood projects and confined casework. The elevated handle allows the iron to lie flat - a...
£125.00 (VAT exempt)
Kirschen 6 Chisel Set (2 Cherries Brand) [Preowned, SOLD]Kirschen 6 Chisel Set (2 Cherries Brand) [Preowned, SOLD]
Sold
Kirschen 6 Chisel Set (2 Cherries Brand) [Preowned, SOLD]
A boxed set of six chisels in a wooden presentation case by Kirschen, Germany. 6 little used "2 Cherries Brand" chisels with graduated beech handles (the wider the chisel the bigger the handle). 6, 10, 12, 16, 20 & 26mm wide blades, shaped handle and fitted with a steel ferrule. Polished blades made from high carbon steel. Pre-owned. Little used. Available new elsewhere in the UK for about...
£95.00 (VAT exempt)
Record 043 Plough Plane [Preowned, Unused, SOLD]Record 043 Plough Plane [Preowned, Unused, SOLD]
Sold
Record 043 Plough Plane [Preowned, Unused, SOLD]
This sweet little Record plough plane No. 043 is 140mm (5 1/2'') overall designed for making small rebates and cutting grooves. The 043 has an adjustable depth stop, 2 arms and a bridged fence which can be used on either side of the plane body (for left or right handed use). Original (tatty box). The plane is unused. 3mm, 4.5mm & 6.4mm cosmetically tarnished blades. Commission...

4

£75.00 (VAT exempt)
Stanley No.50 Combination Plane [Preowned, Unused, SOLD]Stanley No.50 Combination Plane [Preowned, Unused, SOLD]
Sold
Stanley No.50 Combination Plane [Preowned, Unused, SOLD]
It is quite easy to find this plane on reselling sites like Ebay etc. However, unlike many of the examples on those sites, this Stanley No.50 Combination plane is in unused, "as new" condition, in its original box (this has been drawn on in felt tip pen), with instruction leaflet, with the 17 cutters in the wooden cutter holder, has both spurs and the nickel plating is 95+ untarnished. 9 plough/dado...
£135.00 (VAT exempt)
Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]
Sold
Lie-Nielsen Toolworks Small Shoulder Plane No.041 [Preowned, Unused, SOLD]
Pre-owned in excellent, unused condition This description is from our site where this plane (without plane sack is available for £245) ''This is the smallest of the Lie-Nielsen ''Preston style'' shoulder planes, 5/8'' wide, 5 3/4'' long. The blade is 0.140'' thick, and the tool weighs 1.35 lbs. With an adjustable mouth like its larger siblings,...

5

£195.00 inc VAT
Lie-Nielsen Toolworks Medium Shoulder Plane No.042 [Preowned, Unused, SOLD]Lie-Nielsen Toolworks Medium Shoulder Plane No.042 [Preowned, Unused, SOLD]
Sold
Lie-Nielsen Toolworks Medium Shoulder Plane No.042 [Preowned, Unused, SOLD]
Pre-owned in excellent, unused condition This description is from our site where this plane (without plane sack is available for £329) ''An improved version of the now discontinued Record 042. This plane is 3/4'' wide and weighs 2.35lbs. The body is 9¼'' long, with a 3/4'' x .140'' thick blade. This is an elegant tool for trimming and...
£245.00 inc VAT
Lie-Nielsen Toolworks Large Shoulder Plane No.073 [Preowned, Unused, SOLD]Lie-Nielsen Toolworks Large Shoulder Plane No.073 [Preowned, Unused, SOLD]
Sold
Lie-Nielsen Toolworks Large Shoulder Plane No.073 [Preowned, Unused, SOLD]
Pre-owned in excellent, unused condition This description is from our mail site where this plane (without plane sack is normally available for £376 - but we are currently out of stock!) "A versatile, general purpose Shoulder Plane with nice heft and the best size to start with. This all-metal Shoulder Plane is based on the Record 073, which in turn was based on a Preston model. The Bronze lever...
£315.00 inc VAT
Woodpeckers Precision Straight Edge SERX - 24'' [Preowned, SOLD]Woodpeckers Precision Straight Edge SERX - 24'' [Preowned, SOLD]
Sold
Woodpeckers Precision Straight Edge SERX - 24'' [Preowned, SOLD]
This is a pre-owned Imperial 24" straight edge with bevelled graduated edge (1/32") Super useful for setting up your jointer or table saw. Crazy accuracy with .003" tolerance. The base edge has two edges for increased stability. Machined from aircraft grade aluminium and anodised for protection and appearance. We do not believe this straight edge has ever been used.
£72.00 inc VAT
Record Imp No. 80 Vice [Preowned, SOLD]Record Imp No. 80 Vice [Preowned, SOLD]
Sold
Record Imp No. 80 Vice [Preowned, SOLD]
Smooth working vice with anvil. This is a genuinely good and original example of this handy little beastie. We sold one just like it a couple of weeks ago and this is as good as that one. It is designed to clamp to your workbench and has 2 1/4'' jaws that open to about 2 3/4''.
£36.00 inc VAT
Tite Mark Glen-Drake Standard Marking Gauge [Preowned, SOLD]Tite Mark Glen-Drake Standard Marking Gauge [Preowned, SOLD]
Sold
Tite Mark Glen-Drake Standard Marking Gauge [Preowned, SOLD]
Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark Standard...
£95.00 inc VAT
Tite Mark Long Marking Gauge [Preowned, SOLD]Tite Mark Long Marking Gauge [Preowned, SOLD]
Sold
Tite Mark Long Marking Gauge [Preowned, SOLD]
Pre-owned in little used condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with a brass body and fixed circular A2 blade hardened to 58-60 Rockwell. The blade retracts safely into a recess in the head. The Tite-Mark...
£100.00 inc VAT
Tite-Mark Glen-Drake Mini Marking Gauge (with marking and mortise blade sets) [Preowned, SOLD]Tite-Mark Glen-Drake Mini Marking Gauge (with marking and mortise blade sets) [Preowned, SOLD]
Sold
Tite-Mark Glen-Drake Mini Marking Gauge (with marking and mortise blade sets) [Preowned, SOLD]
Pre-owned in very good condition. The Tite-Mark Range is manufactured by Glen Drake Toolworks and distributed by Lie-Nielsen Toolworks (both from the USA). NOTE - This mini tite-mark marking gauge is no longer in production. The unique micrometer adjustment makes these marking gauges an easy and very accurate tool to use. It has steel shafts with a brass body and fixed circular A2 blade hardened...
£115.00 inc VAT
NO KNICKERS! Lie-Nielsen Toolworks Rebating Block Plane No.507 [Preowned, SOLD]NO KNICKERS! Lie-Nielsen Toolworks Rebating Block Plane No.507 [Preowned, SOLD]
Sold
NO KNICKERS! Lie-Nielsen Toolworks Rebating Block Plane No.507 [Preowned, SOLD]
Pre-owned in little used condition with Lie-Nielsen branded plane sack The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R). This 12° angle rebate block plane is based on an old Sargent block plane (No 507). The plane body is made from unbreakable ductile iron and is ground flat and square to .001". The cap iron is polished...
£165.00 inc VAT
Lie-Nielsen No.103 Bronze Standard Angle Block Plane [Preowned, Unused, SOLD]Lie-Nielsen No.103 Bronze Standard Angle Block Plane [Preowned, Unused, SOLD]
Sold
Lie-Nielsen No.103 Bronze Standard Angle Block Plane [Preowned, Unused, SOLD]
This standard angle block plane has been discontinued for some time from Lie Nielsen Toolworks. They have now entered the "collectible" category and if that's your interest or just that you want to use this plane then it's deep pocket time (sorry!). It is identical in size to the low angle version (the 102) but the blade is bedded at 20 degrees which may appeal when working difficult timbers. This...
£275.00 inc VAT
Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]
Sold
Woodpeckers Box Clamps - Set of 4 [Preowned, SOLD]
The Woodpeckers Box Clamp is designed for clamping cases, drawers, cabinets and most other boxes made from material 1/4" - 1" thick. Its main advantage is its ability to apply simultaneous in and downward pressure against 2 perpendicular pieces. The box clamp can be assembled in "fixture mode" or "hand clamp mode"- either way it works the same with the difference being from which side of the clamp...
£75.00 (VAT exempt)
Woodpeckers Medium & Large Bevel Squares & Reference Plate - The Deluxe Set [Preowned, SOLD]Woodpeckers Medium & Large Bevel Squares & Reference Plate - The Deluxe Set [Preowned, SOLD]
Sold
Woodpeckers Medium & Large Bevel Squares & Reference Plate - The Deluxe Set [Preowned, SOLD]
The stainless-steel blade of the bevel squares has a beautiful satin finish. Stainless steel is also used throughout the internal blade locking mechanism. The handles are milled from a solid aluminium billet and then anodized to give it the familiar “Woodpeckers Red” appearance and outstanding corrosion protection. The Angle Reference Plate, the perfect companion. When you need to transfer...
£225.00 (VAT exempt)
Woodpeckers Corner Jig (with 12 Radius and 6 Chamfer Attachments) [Preowned, SOLD]Woodpeckers Corner Jig (with 12 Radius and 6 Chamfer Attachments) [Preowned, SOLD]
Sold
Woodpeckers Corner Jig (with 12 Radius and 6 Chamfer Attachments) [Preowned, SOLD]
12 Radius templates (originally sold with 16, however this set does not include the 4 biggest sizes) 6 chamfer templates Here is some video information that shows you how useful this jig could be. Radius or Chamfered corners? The choice is yours with Woodpeckers Corner Jig Corner Jig | Woodpeckers Woodworking Tools Only one of the radius corners seems to have been well used, only a...
£225.00 (VAT exempt)
Woodpeckers Equal Space Divider [Preowned, SOLD]Woodpeckers Equal Space Divider [Preowned, SOLD]
Sold
Woodpeckers Equal Space Divider [Preowned, SOLD]
This very handy tool divides your space into 6 equal parts from 3/4" (20mm) to 4" (100mm) Based on the mathematical theory of the parallelogram this tool has arms that always move parallel to each other and stay perpendicular to the target line which allows you to be able to draw a line instead of just a point. Laser cut from stainless spring steel with Swiss machined precision pins made to very exacting...
£88.00 (VAT exempt)
Woodpeckers - Setup Blocks (Metric) - 10pc Set [Preowned, SOLD]Woodpeckers - Setup Blocks (Metric) - 10pc Set [Preowned, SOLD]
Sold
Woodpeckers - Setup Blocks (Metric) - 10pc Set [Preowned, SOLD]
Woodpeckers Precision Setup Blocks Beat a Tape Measure Every Time Stop Squinting! Have you noticed that as the years go by, the marks on rules and tapes seem to get closer and closer together? Uncle Albert has had this problem for a long time now. Here’s a way to get those tiny lines out of your life when working on critical machinery set ups. Woodpeckers Setup Blocks give you precise physical references...
£80.00 (VAT exempt)
Woodpeckers Pocket Compass Set [Preowned, SOLD]Woodpeckers Pocket Compass Set [Preowned, SOLD]
Sold
Woodpeckers Pocket Compass Set [Preowned, SOLD]
Little used, no case. PCOMP21-SET. Composed of Pocket Compass XL & Pocket Compass. Metric & Imperial Scaling. A traditional divider-style two-legged compass leaves a lot to be desired in a woodworking shop. The slightest nudge can change the setting. The pivot point is approaching the stock at an angle, so it likes to skate out of position. And, they’re just plain awkward to carry around (not...
£85.00 (VAT exempt)
Woodpeckers Pocket T Square - TS-75 [Preowned, SOLD]Woodpeckers Pocket T Square - TS-75 [Preowned, SOLD]
Sold
Woodpeckers Pocket T Square - TS-75 [Preowned, SOLD]
Pre-owned TS-75 metric Saddle T - Square made in the USA. Little used in G++ condition..(available new elsewhere in the UK for about £75) Edge markings to 90mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical...
£55.00 (VAT exempt)
Woodpeckers Saddle Square - TS150 [Preowned, SOLD]Woodpeckers Saddle Square - TS150 [Preowned, SOLD]
Sold
Woodpeckers Saddle Square - TS150 [Preowned, SOLD]
Edge markings to 170mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils) . Laying down a line parallel to the edge of your stock is as simple as finding the hole...
£60.00 (VAT exempt)
Woodpeckers Saddle Square - TS200 [Preowned, SOLD]Woodpeckers Saddle Square - TS200 [Preowned, SOLD]
Sold
Woodpeckers Saddle Square - TS200 [Preowned, SOLD]
Pre-owned TS-200 metric Saddle T -square made in the USA. Little used in G++ condition.. Edge markings to 220mm in 1mm increments. The first thing to notice with a Woodpeckers Saddle T-Square is the array of holes perforating the centre of the blade. These holes are perfectly spaced 1 mm apart and are sized just right for the tip of a mechanical pencil (see our excellent Pentel Graphgear pencils)...
£72.00 (VAT exempt)
Woodpeckers 300mm Precision Square (No.1281) [Preowned, SOLD]Woodpeckers 300mm Precision Square (No.1281) [Preowned, SOLD]
Sold
Woodpeckers 300mm Precision Square (No.1281) [Preowned, SOLD]
The core of the 1281 is a precisely machined square milled from cast and ground tool plate......the most stable aluminium in the world. The stability of the material and the methods Woodpeckers use to machine the core mean they all hold the tolerance to +/-.0085°. To this highly accurate core they add cheeks to make the base thicker. Metric graduations One piece central core Cheeks are narrower...
£120.00 (VAT exempt)
Woodpeckers 200mm Precision Square (No.851) [Preowned, SOLD]Woodpeckers 200mm Precision Square (No.851) [Preowned, SOLD]
Sold
Woodpeckers 200mm Precision Square (No.851) [Preowned, SOLD]
What sets Woodpeckers squares above the rest is their one-piece central core design. Rather than a blade attached to a beam, as you will find in most try-squares of this size, the 851 has one piece of tool plate aluminium meticulously machined into a square. Then cheeks are added to the central core with stainless steel location pins. The cheeks are 1/4'' (6mm) narrower than the central core,...
£100.00 (VAT exempt)
Woodpeckers 150mm Precision Square (No. 641) [Preowned, SOLD]Woodpeckers 150mm Precision Square (No. 641) [Preowned, SOLD]
Sold
Woodpeckers 150mm Precision Square (No. 641) [Preowned, SOLD]
What sets Woodpeckers squares above the rest is their one-piece central core design. Rather than a blade attached to a beam, as you will find in most try-squares of this size, the 641 has one piece of tool plate aluminium meticulously machined into a square. Then cheeks are added to the central core with stainless steel location pins. The cheeks are 1/4'' (6mm) narrower than the central core,...
£80.00 (VAT exempt)
2 Woodpeckers Metric Carpenter's Squares & Mini Square Bundle [Preowned, SOLD]2 Woodpeckers Metric Carpenter's Squares & Mini Square Bundle [Preowned, SOLD]
Sold
2 Woodpeckers Metric Carpenter's Squares & Mini Square Bundle [Preowned, SOLD]
Pre-owned, commission sale. All 3 squares are in excellent condition with minor cosmetic blemishes. 150mm & 95mm Carpenter's Squares & The Mini Square All made by Woodpeckers USA. Both of these One-Piece Carpenter Squares have an engraved scale along the vertical edge and the 150mm also has the most common angles marked (18, 22-1/2, 30, 45, 60, 67.5, 72). Metric graduations every millimetre. The...
£88.00 (VAT exempt)
Woodpeckers 6SS Carpenters Square [Preowned, SOLD]Woodpeckers 6SS Carpenters Square [Preowned, SOLD]
Sold
Woodpeckers 6SS Carpenters Square [Preowned, SOLD]
The fixed 90° and 45° angles are accurate to within .0085° or better. The square’s stout construction, including a stainless steel blade, means it will last a lifetime and never lose tolerance. The tool’s aluminum handles are registered on the base of the square with precision-milled, tight-tolerance steel pins, then fastened with stainless steel socket head screws. Woodpeckers Model 6SS Carpenters...
£88.00 (VAT exempt)
Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, Unused, SOLD]Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, Unused, SOLD]
Sold
Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, Unused, SOLD]
Pre-owned but unused in original packaging (2021) This is from our description on our main site where the dowel pate is available for £106 "If you want to make exact-size dowels from any wood you choose, a Lie-Nielsen Dowel Plate is the best tool. It's also handy to get a precise tenon on chair spindles. The Lie Nielsen plates are 1/4" x 5-5/8" x 1½" surface...
£88.00 (VAT exempt)
Lie-Nielsen Honing Guide [Preowned, As New, SOLD]Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Sold
Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Pre-owned but unused in original packaging. A commission sale. This description of the honing guide is from our Lie-Nielsen section of our website ''The Lie-Nielsen version of the side clamping style of honing guide is solidly machined from Stainless Steel, with a Bronze bearing. Their Honing Guide features removable jaws: it comes with a standard pair of jaws that fit most Lie-Nielsen...
£135.00 (VAT exempt)
Woodpeckers T-Square Metric 600mm [Preowned, SOLD]Woodpeckers T-Square Metric 600mm [Preowned, SOLD]
Sold
Woodpeckers T-Square Metric 600mm [Preowned, SOLD]
This is pre-owned in good condition. The classic bright red finish has faded which is a well documented feature affecting some Woodpecker tools over time. This square is 10+ years old but has seen little use. The anodizing process to coat the aluminium surface can be inconsistent between batches, some tools may fade over time, most do not it seems. However if you want a red colour match to mirror your...
£114.00 (VAT exempt)
Woodpeckers OneTIME Tool - 36'' Steel Straight Edge [Preowned, SOLD]Woodpeckers OneTIME Tool - 36'' Steel Straight Edge [Preowned, SOLD]
Sold
Woodpeckers OneTIME Tool - 36'' Steel Straight Edge [Preowned, SOLD]
This 36" pre-owned steel straight edge is 7/32'' thick by 2 1/2'' wide Heavy duty to check for flatness with a miserly 0.0002'' tolerance per foot In very good condition. This tool was discontinued by Woodpeckers about 4 years ago. A commission sale.
£85.00 (VAT exempt)
A Descent of Woodpeckers! - 4 Rule Bundle [Preowned, SOLD]A Descent of Woodpeckers! - 4 Rule Bundle [Preowned, SOLD]
Sold
A Descent of Woodpeckers! - 4 Rule Bundle [Preowned, SOLD]
A group of Woodpeckers hanging together is known as a “descent.” This makes sense because most Woodpeckers start at the top of trees and then continue to work their way down. If you see a group of Wrens together, then you are witnessing a “herd” or “chime” of Wrens. A group of bullfinches is called a "bellowing". 6 pre-owned Woodpeckers tools! Woodpeckers...
£250.00 (VAT exempt)
Lie-Nielsen Bevel Edge Chisels (O1 Steel) - Set of 5 in leather roll [Preowned, Unused, SOLD]Lie-Nielsen Bevel Edge Chisels (O1 Steel) - Set of 5 in leather roll [Preowned, Unused, SOLD]
Sold
Lie-Nielsen Bevel Edge Chisels (O1 Steel) - Set of 5 in leather roll [Preowned, Unused, SOLD]
5 chisels in O1 steel. 1/8", 1/4", 3/8", 1/2" & 3/4" wide. Lie-Nielsen Leather tool roll. Most bench chisel makers now use A2 steel (or in the case of Veritas, PMV11), in the making of their chisels. Basically this steel offers an improvement in edge retention although it is more difficult to sharpen. O1 steel, on the other hand, is still preferred by many for...
Was £495.00 Now £475.00 inc VAT
Lie-Nielsen Toolworks - Set of 5 Mortise Chisels with Lie Nielsen Roll [Preowned, As New, SOLD]Lie-Nielsen Toolworks - Set of 5 Mortise Chisels with Lie Nielsen Roll [Preowned, As New, SOLD]
Sold
Lie-Nielsen Toolworks - Set of 5 Mortise Chisels with Lie Nielsen Roll [Preowned, As New, SOLD]
An unused set of 5 chisels in the branded Lie-Nielsen leather roll. 3/16'', 1/4'', 5/16'', 3/8'' & 1/2'' Pre-owned but not used.
£595.00 inc VAT
Flexcut Carving Tools - Set of 9 Box [Preowned, Unused, SOLD]Flexcut Carving Tools - Set of 9 Box [Preowned, Unused, SOLD]
Sold
Flexcut Carving Tools - Set of 9 Box [Preowned, Unused, SOLD]
The sets comprises: No.2 15mm gouge No.3 12mm gouge No.3 18mm gouge No.6 21mm gouge No.8 22mm gouge No.9 14mm gouge No.11 12mm gouge 22mm back bent gouge 16mm 70 degree V parting tool These tools have long fixed handles and the set is described (poorly) as a Deluxe Power Handle Set LH100. They are better described as a set of handled carving tools for larger scale work...
£120.00 inc VAT
Veritas Optical Center Punch 05N59.01 [Preowned, Unused, SOLD]Veritas Optical Center Punch 05N59.01 [Preowned, Unused, SOLD]
Sold
Veritas Optical Center Punch 05N59.01 [Preowned, Unused, SOLD]
This is now discontinued by its makers who said this about it...(apologies for the misspelling of the word centre!) ''To keep a twist drill from skating on metal (and leaving you with a hole in the wrong place) you should always use a center punch, especially when using small flexible bits. The dimple created by the punch holds the bit point true. The Veritas optical center punch simplifies...
£30.00 inc VAT
Veritas Magnetic Rule Magnifier 05N5701 [Preowned, Unused, SOLD]Veritas Magnetic Rule Magnifier 05N5701 [Preowned, Unused, SOLD]
Sold
Veritas Magnetic Rule Magnifier 05N5701 [Preowned, Unused, SOLD]
The rare earth magnets in the 28mm diameter base which holds a short post that has a magnet at its head to hold the magnifier. This allows you to accurately read small measurements on your steel rule. (See photo - steel rule not included in the sale) Unused in original box
£24.00 inc VAT
2x Wonder Dogs & 2x Bench Dogs - Veritas [Preowned, SOLD]
Sold
2x Wonder Dogs & 2x Bench Dogs - Veritas [Preowned, SOLD]
The Wonder Dog by Veritas is a steel post and screw with black oxide finish, solid brass clamp head and handle. The Wonder Dog can pivot in any direction that clamping is required. An easy-adjusting handle provides ample clamping pressure in any position. The dog head has two screw holes, so any tip shape can be cut with a scroll saw and attached for specialized work. The Wonder Dog post is 6...
£75.00 inc VAT
Eclipse No: 230 Engineers 1 1/2'' Vee blocks and clamp [Preowned, SOLD]Eclipse No: 230 Engineers 1 1/2'' Vee blocks and clamp [Preowned, SOLD]
Sold
Eclipse No:
230 Engineers 1 1/2'' Vee blocks and clamp [Preowned, SOLD]
Pre-owned but in excellent, possibly unused condition.
£48.00 inc VAT
Record Imp No. 80 Vice [Preowned, SOLD]Record Imp No. 80 Vice [Preowned, SOLD]
Sold
Record Imp No. 80 Vice [Preowned, SOLD]
Smooth working vice with anvil. This is a genuinely good and original example of this handy little beastie. It is designed to clamp to your workbench and has 2 1/4'' jaws that open to about 2 3/4''.
£42.00 inc VAT
Millers Falls Hand Vice with bits [Preowned, SOLD]Millers Falls Hand Vice with bits [Preowned, SOLD]
Sold
Millers Falls Hand Vice with bits [Preowned, SOLD]
A bit of vintage fun with this lovely example of a Millers Falls hand vice with 6 bits. The bits are secretly housed in the ebony handle which has a screw top, The handle can be screwed into the vice from the underside or from the side. All original. 6 bits include a little circular anvil, 3 chisels and 2 V shaped bits bent at right angle. Lightly cleaned to reveal the maker's mark...
Was £60.00 Now £48.00 inc VAT
Swan Neck Lock Mortise Chisel 3/8'' [Preowned, SOLD]Swan Neck Lock Mortise Chisel 3/8'' [Preowned, SOLD]
Sold
Swan Neck Lock Mortise Chisel 3/8'' [Preowned, SOLD]
14 1/2'' overall with a lovely beech handle. Stamped "I Sorby" on the steel. This hasn't done any work in our opinion and is in G++ condition
£36.00 inc VAT
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 |