Sold Pre-owned and Second Hand Tools Archive: Page 5

Manufacturer unknown. Oval beech handle with brass ferrule and leather washer. 240mm overall with 120mm handle. HSS blade. Blade thickness is a very consistent 2.5 mm up to where it bevels. This has been well made whoever did it.

£28.00 inc VAT

William Marples 5/8'' socketed Lock Mortise Chisel [Preowned, SOLD]

William Marples 5/8'' socketed Lock Mortise Chisel [Preowned, SOLD]

17 1/2'' overall with a short stubby (slightly battered) beech handle. Original Marples trade label on handle. Also stamped W.Marples & Sons, Sheffield, England on the steel. This is the improved sock mortise chisel pattern No.745 This is in G++ condition You can learn more here.. https://williammarplesandsons.com/lock-mortice-chisels/

Was £35.00 Now £25.00 inc VAT

Marples Paring Chisels 1'' & 3/4'' [Preowned, Unused, SOLD]

Marples Paring Chisels 1'' & 3/4'' [Preowned, Unused, SOLD]

385mm overall with 140mm boxwood handles Pre-owned - Unused The 1'' has a cracked brass ferrule. Otherwise in G++ condition. We don't think they have done any work. The handles and blades are marked Marples. 2 bevel edge paring chisels.

£48.00 inc VAT

Marples Bevel Edged Bench Chisels x4 (1/4'', 3/8'', 5/8'' & 3/4'') [Preowned, SOLD]

Marples Bevel Edged Bench Chisels x4 (1/4'', 3/8'', 5/8'' & 3/4'') [Preowned, SOLD]

Pre-owned, little used, will clean up easily to look almost new. Beech handles with brass ferrules. 220-240mm overall. Edge guards included.

£36.00 inc VAT

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

Knight's American Mechanical Dictionaries [Preowned, Unused, SOLD]

This 3 volume set of Knight's American Mechanical Dictionaries and the single volume of Knight's New Mechanical Dictionary (Supplement) was reprinted jointly by The Mid-West Tool Collectors Association and The Early American Industries Association October 1979. It is written elsewhere that "This work has been selected by scholars as being culturally important, and is part of the knowledge...

£250.00 (VAT exempt)

Plough Plane Project [Preowned, SOLD]

So, this grubbly plane, like Fraser, needs a good clean. Beech, with brass tips, escutcheons and depth stop screw. You do not need to put on the marigolds or find a buffing wheel to clean it up. Nothing too heavy is needed , just a bit of tender loving care with a bit of fine wire wool to clean off a few idle paint marks, years of dust layers and a minor amount of surface rust. We think this...

£75.00 inc VAT

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Lie Nielsen Toolworks No.140 Skew Block Planes (Bronze) - Pair (Right & Left) [Preowned, SOLD]

Here is a rare treat. The left hand version has been discontinued and the right handed plane in bronze has not been seen for a few years yet. The Lie-Nielsen No 140 Skew Block Plane is based on the long unavailable Stanley 140, this multi-talented tool is designed to deal with difficult woods using a combination of a low angle approach, shear cutting action from the skewed and tilted blade. A...

£1,200.00 inc VAT

Timber Scribe and Race Knife [Preowned, SOLD]

Timber Scribe and Race Knife [Preowned, SOLD]

Rosewood handled with brass ferrule, this attractive race knife and scribe is unmarked. Original including the wing nut. A lovely vintage tool. Timber scribes were used to mark casks, imported timber, packing crates and trees for felling.

£36.00 inc VAT

Saddlers Round Knife - C S Osborne & Co. Newark N.J [Preowned, SOLD]

Saddlers Round Knife - C S Osborne & Co. Newark N.J [Preowned, SOLD]

This is a lovely vintage Saddlers round knife from the USA manufacturer CS Osborne. It is difficult to date but from its form and simplistic beauty we hazard a guess that it is an early one dating as far back as the 19th Century.The blade has a lovely ring to it when flicked by a finger. It is marked ''C S Osborne & Co. Newark N.J Made in USA'' on the blade. It is also marked...

£50.00 inc VAT

Record 041 Shoulder Plane (5/8'' Blade) [Preowned, SOLD]

Record 041 Shoulder Plane (5/8'' Blade) [Preowned, SOLD]

This is preowned, has a full blade, and has seen little or no use.

£84.00 inc VAT

Armourers Brass Brace [Preowned, SOLD]

This is a sweetie! Stamped RL . iii .10-13 . N . With the government arrow underneath. Measuring 10" overall with a tapered square chuck and a thumb screw (which we do not think is original but it works perfectly well). The 2 1/4” diameter rotating head connects to the body of the brace and it all seems to be working jolly nicely.

£35.00 inc VAT

3 Bridge City Tool Works Scratch Awls [Preowned, Unused, SOLD]

3 Bridge City Tool Works Scratch Awls [Preowned, Unused, SOLD]

SA 1 v 2 - 4 1/2" (115mm) scratch awl (red handle) SA - 2 v 2 - 8" (200mm) scratch awl (blue handle) SA - 3 v 2 - 8" (200mm) bent tip scratch awl (black handle) CNC-turned and anodised aluminium heads. Used for scribing wood, metal, glass, ceramics etc. You can draw lines in the tightest of situations, such as dovetails, mortises, tenons or profiles. The hardened steel blade is long and narrow and...

£60.00 inc VAT

2 Scratch Awls - Bridge City Tool Works [Preowned, Unused, SOLD]

2 Scratch Awls - Bridge City Tool Works [Preowned, Unused, SOLD]

SA - 2 v 2 - 8" (200mm) scratch awl (blue handle) SA - 3 v 2 - 8" (200mm) bent tip scratch awl (black handle) These have not been used. The lids to the original BC boxes are all missing. CNC-turned and anodised aluminium heads. Used for scribing wood, metal, glass, ceramics etc. You can draw lines in the tightest of situations, such as dovetails, mortises, tenons or profiles. The hardened steel...

Was £40.00 Now £36.00 inc VAT