Category
Brand
Collection
Price
Additional Filters
390 products go reset
Sort By
Per Page
View
  • display as grid Grid
  • display as list List
Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]
Special Offer
Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]
Still in their original wrapping, this set comprises of 12 bevel edge chisels from the brand IYOROI in linen roll. 223mm in overall length. Red oak handles. Black finish to the blades with polished hollows. Black finish to striking hoops. Hollow ground backs with single flutes for all widths. Widths are as follows: 1.5, 3, 6, 9, 12,15,18, 21, 24, 30, 36 & 42mm. Denim tool...
£395.00 (VAT exempt)
Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New]Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New]
Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New]
Unused, as new. White paper tool steel and high carbon steel laminated blade with red oak handle and steel striking hoop. 240mm overall. 60mm blade. White paper steel (Shirogami in Japanese) is a carbon tool steel that is ideally suited to the production of chisels. It exhibits superior durability when compared to alloyed blue paper steels. Widely available in the UK for about £70...
£53.00 (VAT exempt)
Veritas - Small Shoulder Plane [Preowned]Veritas - Small Shoulder Plane [Preowned]
Revised
Veritas - Small Shoulder Plane [Preowned]
Pre-owned, a commission sale. This is what we and Lee Valley Tools say about the small shoulder plane... "Designed to seat nicely in the hand, the smallest Veritas shoulder plane is easily controlled using a one-handed grip. The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest...
£170.00 (VAT exempt)
5 Tasai Bench Chisels [Preowned]5 Tasai Bench Chisels [Preowned]
Special Offer
5 Tasai Bench Chisels [Preowned]
These are pre-owned bevel edged bench chisels from the forge of master blacksmith Akio Tasai in Japan. A commission sale. They have been used very sparingly; the hoops have been struck and there are burrs to be attended to in order to safeguard your fingers but that is a quick and easy job. The chisels and box are in G++ condition. Laminated steel with single hollows. The cutting edge is blue...
£965.00 inc VAT
Flexcut Left-Handed Carving Jack [Clearance]Flexcut Left-Handed Carving Jack [Clearance]
Revised
Flexcut Left-Handed Carving Jack [Clearance]
FLEXCUT CARVIN JACK - older version, new. LEFT HANDED For you whittlers out there! This is the older version of the Carvin Jack launched successfully by USA manufacturer Flexcut some 20 years ago to great acclaim. This a new unused version of the Carvin Jack in original packaging (the new version is labelled 2.0) Blades firmly lock in both open and closed positions Supplied with SlipStrop...
£88.00 inc VAT
File Sets
30%
OFF
Percent Off
File Sets
The RH Preyda File Sets, made from prized Arkansas Novaculite, are essential for deburring, chamfering, and creating smooth finishes. These files are highly valued by craftsmen such as gunsmiths, dentists, machinists, and jewelers. File shapes: Round, Square, Triangular, and Knife Blade Size: 4" x 3/8" (101.6mm x 9.5mm) Grit options: Soft (400-600), Surgical Black (4000-6000), Translucent...
Was £51.00 Now from £35.70 inc VAT
9'' Straight Drawknife by Marsden Brothers [Preowned, SOLD]9'' Straight Drawknife by Marsden Brothers [Preowned, SOLD]
Sold
9'' Straight Drawknife by Marsden Brothers [Preowned, SOLD]
Beech handles with brass ferules. This is a lovely drawknife which will serve you well for many a chair leg. The makers stamp is a little indistinct but it is Marsden Brothers. Owner’s stamp of C GIBSON
£58.00 inc VAT
Brusso Hardware – HD-638 Quadrant Hinge [Clearance, SOLD]Brusso Hardware – HD-638 Quadrant Hinge [Clearance, SOLD]
Sold
Brusso Hardware – HD-638 Quadrant Hinge [Clearance, SOLD]
Old stock (same as the new stock) but with old style packaging. This is new old stock – we are offering one pair of this hinge which is popular with box makers. The Brusso HD-638 brass quadrant hinge is engineered with a built-in stop that allows a lid to remain open at 95°. The arc is morticed into the side of the box, beneath the leaf. The hinge is sold in pairs. Each leaf measures...
£54.00 inc VAT
Chisel Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]Chisel Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Sold
Chisel Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Chisel jaw Clamp Pair – unused as new. Pre-owned (Aug 2023) but unused. Save a few pennies!
£42.00 inc VAT
Clifton No.5 1/2 Jack Plane [Preowned, SOLD]Clifton No.5 1/2 Jack Plane [Preowned, SOLD]
Sold
Clifton No.5 1/2 Jack Plane [Preowned, SOLD]
Pre-owned but in excellent condition. Usual scratch marks to sole but this is normal for moderate use. This plane has been very well cared for. The 5 1/2 is a mighty jack plane at 3.1kg and is the largest of the jack planes from Clifton. The 5 1/2 is regularly considered the "go to" plane for people starting out as it really is a versatile beastie.. The name ''jack plane''...
£245.00 (VAT exempt)
Clifton No.5 Jack Plane [Preowned, SOLD]Clifton No.5 Jack Plane [Preowned, SOLD]
Sold
Clifton No.5 Jack Plane [Preowned, SOLD]
Pre-owned but in excellent condition. A Clifton No.5 Jack Plane. The smaller of the two jack planes from Clifton. All Clifton planes have a heavy casting, so if you do not need the extra width of the wider 5 1/2 plane, this could be the jack plane for you. Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment of the...
£215.00 (VAT exempt)
Flexcut Special Edition Forged 4 Knife Set [Clearance, SOLD]Flexcut Special Edition Forged 4 Knife Set [Clearance, SOLD]
Sold
Flexcut Special Edition Forged 4 Knife Set [Clearance, SOLD]
4 different bladed knives for carving / whittling. A few years back (around 2016), Flexcut USA created some Special Edition Forged Knives with drop forged precision machines blades married to bocote wood (a dark wood, similar in appearance to walnut) and leather handles for comfort and grip. Pre-sharpened by hand. The 4 knives are each just over 6” (150mm) in length overall. The blades...
£112.00 inc VAT
Lie Nielsen No.5 1/2 – Jack Plane [Preowned, As New, SOLD]Lie Nielsen No.5 1/2 – Jack Plane [Preowned, As New, SOLD]
Sold
Lie Nielsen No.5 1/2 – Jack Plane [Preowned, As New, SOLD]
An unused, “as new” plane with Lie-Nielsen branded plane sock. This is what we say about the plane in our Lie-Nielsen section… "A Lie-Nielsen No.5 1/2 Jack Plane. Probably the most popular bench plane, and the one that many woodwork teachers recommend starting out with due to its versatility. The equivalent of a later type Stanley Bedrock No.605½. 14-3/4"...
£455.00 inc VAT
Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned, SOLD]Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned, SOLD]
Sold
Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned, SOLD]
This is a commission sale. Used but in G++ condition 3/8” straight blade. Reversible curved/straight detachable fence. Instruction leaflet. This is our description from our LN section… “A router plane is a great tool for working shallow mortices - hinge gains, inlay, door locks, trimming tenons and the like. Lie-Nielsen's version is based on an early Stanley...
£198.00 inc VAT
Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, SOLD]Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, SOLD]
Sold
Lie-Nielsen Toolworks - Metric Dowel Plate [Preowned, SOLD]
Used but in G++ condition. A commission sale.
£85.00 (VAT exempt)
Lie-Nielsen – 1/2'' Mortise Chisel [Preowned, As New, SOLD]Lie-Nielsen – 1/2'' Mortise Chisel [Preowned, As New, SOLD]
Sold
Lie-Nielsen – 1/2'' Mortise Chisel [Preowned, As New, SOLD]
Unused – pre-owned, as new Exactly the same chisel sells in our LN section for £138.
£108.00 inc VAT
Long Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]Long Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Sold
Long Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Unused as new (Sept 2023). Pre-owned but unused. Save a few pennies!
£42.00 inc VAT
Mortise Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]Mortise Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Sold
Mortise Jaw Clamp Pair for the Lie-Nielsen Honing Guide [Preowned, As New, SOLD]
Unused as new (Sept 2023). Pre-owned but unused. Save a few pennies!
£42.00 inc VAT
Quercus Magazine – Working Wood by Hand – 6 back issues [Clearance, SOLD]Quercus Magazine – Working Wood by Hand – 6 back issues [Clearance, SOLD]
Sold
Quercus Magazine – Working Wood by Hand – 6 back issues [Clearance, SOLD]
As new. Nick Gibbs, long in the tooth English journalist was the editor of Quercus. Nick created this fantastic magazine with a lot of variety for woodworking by hand enthusiasts. Quercus Magazine was launched in June 2020 for anyone working wood by hand, with chairmaking, green woodworking, Slöjd, carving and furniture-making. After three successful years editing Quercus and taking part...
£15.00 (VAT exempt)
Set of 4 Odate Crowning Plates & an Odate Dressing Plate [Preowned, SOLD]Set of 4 Odate Crowning Plates & an Odate Dressing Plate [Preowned, SOLD]
Sold
Set of 4 Odate Crowning Plates & an Odate Dressing Plate [Preowned, SOLD]
This set of plates is from David Charlesworth workshop in North Devon at Hartland, Devon, England (see the new film featuring Gillian Anderson & Jason Isaacs called THE SALT PATH for an idea of where David lived if you have never been to Hartland). So, David will have used these (probably for testing and review for an article). The plates have not been heavily used in our opinion but are pre-owned...
£385.00 inc VAT
Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]
Sold
Stanley Bailey No.7 Low Knob Jointer Plane – Rosewood Handles [Vintage, SOLD]
This plane has seen good service for many decades and remains in good condition. The original Stanley Sweetheart blade has worn down to the last 3/4'' so we have fitted a 2 3/8'' HOCK A2 cyro replacement iron for you (the original iron will also come with the plane) Patent dates of MAR 25 - 02 AUG 19- 02 APR 19 – 10 Lovely rosewood handles.
£125.00 inc VAT
Stanley No.5 1/2 Jack Plane [Preowned, SOLD]Stanley No.5 1/2 Jack Plane [Preowned, SOLD]
Sold
Stanley No.5 1/2 Jack Plane [Preowned, SOLD]
Pre-owned in G++ condition. Attractive rosewood handles. A good user plane that has been well looked after. A commission sale.
£75.00 (VAT exempt)
Sterling Toolworks - Plane Adjusting Hammer [Preowned, SOLD]Sterling Toolworks - Plane Adjusting Hammer [Preowned, SOLD]
Sold
Sterling Toolworks - Plane Adjusting Hammer [Preowned, SOLD]
This is a commission sale. Pre-owned but hardly used in G++ condition. Note - this hammer comes with a spare "spud" in a Sterling Toolworks branded bag. This is what we say about the hammer on our website, where it sells new for £175: "The Sterling Tool Works Plane Adjustment Hammer is designed to be used to adjust plane blades and wooden plane wedges for wooden hand...
£125.00 (VAT exempt)
Woodpeckers - 900m Rule (with Hook & Rule Stop 2) [Preowned, SOLD]Woodpeckers - 900m Rule (with Hook & Rule Stop 2) [Preowned, SOLD]
Sold
Woodpeckers - 900m Rule (with Hook & Rule Stop 2) [Preowned, SOLD]
Pre-owned but in G+ to Fine condition The rule reads left to right up to 900mm on one bevelled edge. 0-450mm from the centre on the other edge. The ''0'' mark is the exact centre of the rule, with the scale running in both directions from that point. Its quick and easy to move the rule to locate centre of a board and then lay out equal spacing from that point Engraving tolerance...
£118.00 inc VAT
Woodpeckers 600mm Edge Rule [Preowned, As New, SOLD]Woodpeckers 600mm Edge Rule [Preowned, As New, SOLD]
Sold
Woodpeckers 600mm Edge Rule [Preowned, As New, SOLD]
Pre-owned but as new. Measuring the narrow edge of stock with typical rules is a little awkward. Getting the rule parallel to the stock and leaving yourself room to make a tick mark can become quite a juggling act. Working on the face of a piece is usually a little easier, but you can still struggle to jeep the rule parallel to your work. The Woodpeckers Woodworkers Edge Rule wraps around the edge...
£30.00 inc VAT
6 Pfeil Carving Tools [Preowned, As New, SOLD]6 Pfeil Carving Tools [Preowned, As New, SOLD]
Sold
6 Pfeil Carving Tools [Preowned, As New, SOLD]
1F/6 (fishtail chisel 6mm) 1F/12 (fishtail chisel 12mm) 3F/12 (fishtail gouge series 3 - 12mm) 5/5 (straight gouge series 5 – 5mm wide) 8/4 (straight gouge series 8 – 4mm wide) 8/10 (straight gouge series 8 – 10mm wide) No packaging. These carving tools have been used just a few times. They appear as new. A quick calculation from the Pfeil section of our website...
£125.00 inc VAT
Gunmetal Shoulder Rebate Plane with Lovely Ebony infill and wedge [Vintage, SOLD]Gunmetal Shoulder Rebate Plane with Lovely Ebony infill and wedge [Vintage, SOLD]
Sold
Gunmetal Shoulder Rebate Plane with Lovely Ebony infill and wedge [Vintage, SOLD]
This is a little cutey measuring 5'' X 2'' high x 1'' wide (excluding the wedge and blade) No makers mark and we think this is owner made (T SHARP stamped on the wedge). The mouth requires a tiny filing to bring it to square. The infill and wedge are very well done. Good iron with 3/4'' remaining. We haven't cleaned this as we don't like buffing old...
£72.00 inc VAT
Record 722 Small Router Plane [Vintage, SOLD]Record 722 Small Router Plane [Vintage, SOLD]
Sold
Record 722 Small Router Plane [Vintage, SOLD]
This webpage will tell you more about this little English router plane: Record 722 Router Plane One 1/4" straight blade. No box.
£36.00 inc VAT
Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]
Sold
Record Circular (Circumference) Plane – 020c [Preowned, As New, SOLD]
In mint condition. This is a commission sale for a perfectly looked after unused plane. Quite a few of these planes, whether Stanley or Record are in circulation on Ebay and the like, but the buyer must be very wary as often these planes have had a hard life, particularly the vintage planes (the rivets on the sole near the mouth loosen and cracks can develop in the castings). No such fears here...
£185.00 (VAT exempt)
Veritas No.4 1/2 Smooth Plane [Preowned, SOLD]Veritas No.4 1/2 Smooth Plane [Preowned, SOLD]
Sold
Veritas No.4 1/2 Smooth Plane [Preowned, SOLD]
This plane is from Veritas range of bench planes, launched a few years ago. Bevel down blade. Adjustable mouth. 2 3/8” wide A2 blade. Common pitch frog (45 degrees) Tall front knob. Well protected by a light covering of oil this plane is in G++ to F condition. No box. A commission sale.
£180.00 (VAT exempt)
Clifton Convex Spokeshave – No.550 [Preowned, SOLD]Clifton Convex Spokeshave – No.550 [Preowned, SOLD]
Sold
Clifton Convex Spokeshave – No.550 [Preowned, SOLD]
Pre-owned – some minor wear and cosmetic markings. G++ condition. A commission sale. Clifton spokeshaves (UK) are made from virtually unbreakable spheroidal graphite/malleable iron; the surfaces are finished and polished to give maximum comfort in the hand; the weight and balance permits the spokeshave to sit firmly on the wood so that only a stroking action is required to make them cut. The...
£100.00 (VAT exempt)
Lie-Nielsen No.4 – Bronze Smoothing Plane [Preowned, As New, SOLD]Lie-Nielsen No.4 – Bronze Smoothing Plane [Preowned, As New, SOLD]
Sold
Lie-Nielsen No.4 – Bronze Smoothing Plane [Preowned, As New, SOLD]
Pre-owned in as new condition with LN plane sack. This is out of stock in our Lie-Nielsen plane section where it retails for £595. It is a popular plane. Hopefully we will be getting fresh stock during the summer. This is what we say about the brand-new version on our main LN section. “Lie-Nielsen's smoothing planes are precision machined from a manganese bronze casting, or...
£495.00 inc VAT
DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned, SOLD]DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned, SOLD]
Sold
DC Marking Knife – David Charlesworth Spear Pointed Marking Knife [Preowned, SOLD]
That’s DC for David Charlesworth of Hartland, Devon, England. This marking knife hasn’t left it’s packaging so is new, unused stock. These marking knives were made to David’s specification by (almost a rock star) Phil Edwards of Philly Planes fame
£45.00 inc VAT
Mappa Toolworks Mallet [Preowned, As New, SOLD]Mappa Toolworks Mallet [Preowned, As New, SOLD]
Sold
Mappa Toolworks Mallet [Preowned, As New, SOLD]
A commission sale. As new, unused. This has a lovely blackwood handle with an infused maple head. It weighs 650g Overall height of 215mm with a 90mm deep head, 60mm diameter. Mappa (Netherlands) didn’t really get going as a tool making concern. 2 great hand tool enthusiasts got too busy with life, work and other distractions to build their portfolio of tools (where is that travisher boys??)...
£95.00 (VAT exempt)
Hans Karlsson Short Handled 60mm Adze [Preowned, As New, SOLD]Hans Karlsson Short Handled 60mm Adze [Preowned, As New, SOLD]
Sold
Hans Karlsson Short Handled 60mm Adze [Preowned, As New, SOLD]
These adzes are always in great demand but with a very limited production run. These famous Swedish made adzes are not so easy to get hold of (they seem to be sold out everywhere!). This example is a commission sale from a customer who has never used the adze, it is in “as new” condition, complete with a protective leather sheath. This 2 3/8” (about 60mm) wide cutting edge has...
£285.00 (VAT exempt)
Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]
Sold
Pair of Stanley 98/99 Rebate Planes [Preowned, SOLD]
They may look a bit scruffy but in fact that is just dried oil in the photos which disguises tools in G++ condition with full blades and nice rosewood knobs. This pair will clean up nicely. Patent date of Jan 95 (that will be 1895!).
£138.00 inc VAT
4 Small Beech Rebate Planes [Preowned, SOLD]4 Small Beech Rebate Planes [Preowned, SOLD]
Sold
4 Small Beech Rebate Planes [Preowned, SOLD]
All with the same owners stamp C Gibson. Convex from front to toe. 4 1/8” long C NURSE & CO. LONDON (owners stamp R. Gibson) Boat shaped sole. 4 ½” long. NURSE (C Gibson) Straight rebate. 4 ½” long. NURSE (C Gibson) Rounded sole. 4” long. (R. Gibson) All the wedges and irons are in g++ condition. It is a sweet collection. We have given...
£60.00 inc VAT
3 Vintage Mortise Chisels [Vintage, SOLD]3 Vintage Mortise Chisels [Vintage, SOLD]
Sold
3 Vintage Mortise Chisels [Vintage, SOLD]
These beauties (2 stamped BUCK and the larger one stamped I & H SORBY) I & H SORBY – octagonal handle – ½” wide BUCK – oval handle 3/16” wide BUCK – oval handle 3/8” wide Great condition. 11 1/2” - 12 ¼” overall length.
£72.00 inc VAT
Convex Beech Plane (with Adjustable Front Boxwood Depth Stop) [Preowned, SOLD]Convex Beech Plane (with Adjustable Front Boxwood Depth Stop) [Preowned, SOLD]
Sold
Convex Beech Plane (with Adjustable Front Boxwood Depth Stop) [Preowned, SOLD]
The 2 ¼” wide iron is by Buck Owners stamp C Gibson
£24.00 inc VAT
6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]
Sold
6 Jorgenson Wooden Hand Screws - 10'' [Preowned, As New, SOLD]
Six, unused Jorgensen hand screws. As new. A commission sale. From the manufacturer's website... "Seasoned, straight-grain hard maple wood jaws marry with cold drawn steel-spindles and nuts with special double-lead threads. Together they create a handscrew clamp that holds tightly over broad areas, providing greater reach and a wider distribution of pressure than other clamps. The angle...
£180.00 (VAT exempt)
5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned, SOLD]5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned, SOLD]
Sold
5 Pairs of Beech Hollows & Rounds Planes – Griffiths Norwich [Preowned, SOLD]
These 10 planes are all in G++ condition. We haven’t cleaned them up, but they will clean up beautifully. The wedges are all fine and the blades are working well. The planes are all stamped with the same owner’s stamp "C GIBSON" They came out of a joiner’s chest with some other tools featured in this week’s Fridays Finds. Pairs of No. 2, 4, 10, 12 &...
£88.00 inc VAT
Woodpeckers Woodworking Rule 300mm [Preowned, As New, SOLD]Woodpeckers Woodworking Rule 300mm [Preowned, As New, SOLD]
Sold
Woodpeckers Woodworking Rule 300mm [Preowned, As New, SOLD]
Pre-owned but unused. Reads from the centre on one edge and left to right on the other edge. Each edge is bevelled. Very crisp white markings 1mm increments. This rule has a very high level of accuracy. These rules are precision made from aircraft grade aluminium and anodized for surface protection and appearance. Woodpeckers say they are straighter, heavier and are easier to handle than any others...
£30.00 inc VAT
Lie-Nielsen No.5 1/2 - Jack Plane [Preowned, As New, SOLD]Lie-Nielsen No.5 1/2 - Jack Plane [Preowned, As New, SOLD]
Sold
Lie-Nielsen No.5 1/2 - Jack Plane [Preowned, As New, SOLD]
An unused, as new plane with Lie-Nielsen branded plane sock. Pre-owned but we don’t think the owner did much more that take it out of the box and stick in the plane sock. It is in great condition. This is what we say about the plane in our Lie-Nielsen section… "A Lie-Nielsen No.5 1/2 Jack Plane. Probably the most popular bench plane, and the one that many woodwork teachers...
£455.00 inc VAT
Boxed Set of 5 Narex Bevel Edge Chisels [Preowned, SOLD]Boxed Set of 5 Narex Bevel Edge Chisels [Preowned, SOLD]
Sold
Boxed Set of 5 Narex Bevel Edge Chisels [Preowned, SOLD]
Pre-owned but sparsely used, they have been sharpened. Good to go to work. These are The Narex Richter chisels, a very well made and designed all-round bench chisel. The base of the box has some scratch marks but is in otherwise G++ condition. The chisels are also in G++ - F condition. 6mm, 9mm, 12mm, 19mm & 25mm wide. Ash hardwood handles have solid stainless steel ferrules and...
£100.00 inc VAT
Lie-Nielsen - Cross Peen Hammer (Brass Head) [Preowned, SOLD]Lie-Nielsen - Cross Peen Hammer (Brass Head) [Preowned, SOLD]
Sold
Lie-Nielsen - Cross Peen Hammer (Brass Head) [Preowned, SOLD]
Pre-owned. G++ condition. Hickory handled. 12" overall. The head is 4" wide and weighs 4 ounces. Used for nailing tacks and making fine blade adjustments on your planes. This has been used and the head has been cleaned up a bit. It has some superficial stain marks, the head is solid (no wobble) so this hammer will work perfectly. The handle is excellent. Original box...
£70.00 (VAT exempt)
Lie-Nielsen - Cross Peen Hammer (Hardened A2 Steel Head) [Preowned, SOLD]Lie-Nielsen - Cross Peen Hammer (Hardened A2 Steel Head) [Preowned, SOLD]
Sold
Lie-Nielsen - Cross Peen Hammer (Hardened A2 Steel Head) [Preowned, SOLD]
Pre-owned. G++ condition. Hickory handled. 12" overall. The head is 4" wide and weighs 4 ounces. Used for nailing tacks and making fine blade adjustments on your planes. This has been used and the head has been cleaned up a bit. It has some superficial stain marks, the head is solid (no wobble) so this hammer will work perfectly. The handle is excellent. Original box...
£70.00 (VAT exempt)
Lie-Nielsen - Cross Peen Hammer (A2 Steel Head) [Preowned, SOLD]Lie-Nielsen - Cross Peen Hammer (A2 Steel Head) [Preowned, SOLD]
Sold
Lie-Nielsen - Cross Peen Hammer (A2 Steel Head) [Preowned, SOLD]
Pre-owned. G++ condition. Hickory handled. 12" overall. The head is 4" wide and weighs 4 ounces. Used for nailing tacks and making fine blade adjustments on your planes. This has been used and the head has been cleaned up a bit. It has some superficial stain marks, the head is solid (no wobble) so this hammer will work perfectly. The handle is excellent. Original box...
£70.00 (VAT exempt)
Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]
Sold
Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New, SOLD]
Made by Pfeil - Switzerland Unused - fine condition - a commission sale. These Pfeil Punches for wood are for creating background detail for your carvings. They are made from steel and weigh 540g each. They are housed in a wooden base. Size - 10mm x 10mm x 135mm each. These are the same set of puches as Classic Hand Tools sell in their Pfeil carving tools section for £170 (and...
£125.00 (VAT exempt)
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |