Sort By
Per Page
View
Grid
List
Gyokucho Flush Cutting Saw Double Edge 125mm
Blade Length : 125mm.
Overall Length : 215mm.
Max Cutting Depth : N/A.
Teeth Pitch / TPI : Fine side 1.0mm / 25.4. Coarse side 1.3mm / 19.5
Blade Thickness : 0.3mm.
Gyokucho Product Number : 1151.
Weight : 50g.
A flexible 0.3mm blade with no set allows you to cut flush wihtout damaging your work surface. Useful for trimming dowels, plugs and smaller joints. These are great saws...
James Krenov:
Leave Fingerprints
Leave Fingerprints
By Brendan Bernhardt Gaffney
James Krenov (1920-2009) was one of the most influential woodworking writers, instructors and designers of the 20th century. His best-selling books – starting with “A Cabinetmaker’s Notebook” – inspired tens of thousands of people to pick up the tools and build things to the highest standard.
Yet, little is known about his life, except...
David Barron 45 degree Guide
A useful aluminium magnetic guide from David Barron for making exact 45° cuts. Great for dovetail mitres, mouldings, picture frames etc.
Muzzles for Veritas Bench Dogs & Pups
For clamping a finished piece without marking it, the slip-resistant muzzles slide over the Bench Dogs (or Bench Pups) to give you a non-marring surface. They have a hard, spring-grip, plastic body with six face ribs.
Available in two sizes: 1¼" long for Bench Dogs or 3/4" long for Bench Pups. Sold in pairs.
Brusso Brass Offset Pivot Hinge L-97
The Brusso L-97 offset pivot hinge is employed when a minimum of visible hardware is desired or when the door must swing free of its frame. It is morticed into the top and bottom of the door and frame; only the pivot is visible. The leaf measures 3¼" x 3/4" x 5/16".
Length: 3.250" - 3¼" - 83mm
Width: 0.750" - 3/4" - 19mm
Leaf Thickness: 0.313"...
Veritas Dowel & Tenon Cutters
Obtaining dowels to perfectly match a project or specific species of timber, is to say the least, almost impossible. Not so if you own a Veritas Dowel cutter and have a few timber off-cuts to hand. These cutters can be used two ways. Either use them like a hand-held pencil sharpener, to put accurate tenons on the tips of turnings or on rustic furniture components. Alternatively using a cordless drill,...
Pfeil Series 1Se - Single Bevel Skew Chisel
The Pfeil Series 1Se Single Bevel Skew Chisel is an essential tool for woodcarvers who require accuracy and control in their projects. This chisel is expertly designed to carve blanks into rough forms and is particularly effective for working on large areas. The single bevel edge allows for smooth, precise cuts, making it ideal for both roughing out and fine detailing.
Key Features:
Single...
Veritas HSS Lipped Metric Brad-Point Drills
These come very high recommended, and Lee Valley consider them their best brad-point drills they've ever made.
Starting with a top-of-the-line American-made twist drill, they reshape and sharpen the tips on a state-of-the-art Swiss CNC grinder. Made from high-speed steel, the bits are not subject to burning, and stay sharp about 10 times as long as carbon steel bits.
The polished flutes give...
Making & Mastering Wood Planes (Revised Edition)
By David Finck. Foreword by James Krenov
No matter what sort of handplane you use, “Making & Mastering Wood Planes” is perhaps the best guide available to understanding, tuning and using these tools at a high level.
Written by a graduate of the College of the Redwoods (now The Krenov School), “Making & Mastering Wood Planes” is ostensibly about the laminated handplanes...
Saburrtooth 1/8'' Flame - 3/8'' x 5/8''
Head Diameter: 3/8"
Head Length: 5/8"
Lie-Nielsen Large Router Plane Closed Throat
A router plane is a great tool for working shallow mortices - hinge gains, inlay, doorlocks, trimming tenons and the like. Lie-Nielsen's version is based on an early Stanley 071 model, but with a closed throat which is ideal for working on the edges of boards or cleaning out the end of a stopped groove in a rail or stile. Also, the blade is held solidly in the body in a square broached hole (blades...
Auriou Needle Rasps
1/2 round, flat, rat tail and knife shaped needle rasps, very fine grain (14) for detailing work.
Approximately 7¼" long with a 2¾" blade, these are well suited for making models or musical instruments and shaping keyholes or pierced carvings - anywhere a larger tool would be awkward or too aggressive.
Stickmakers love using these for detailing work on their sticks.
Veritas Planing Stop
These low-profile work stops present a broad bearing surface. Particularly useful with thin or narrow workpieces, each 1 1/4" wide anodized aluminum rail projects just 0.22" above the bench top, allowing materials as thin as 1/4" to be worked or planed without obstruction. It also provides a reliable registration surface for materials too narrow to span two adjacent bench dogs.
The...
Veritas Precision Square - Metric
This could easily become the most-used measuring tool in your shop. An ideal size for cabinet-making, it has the accuracy of an engineer's square (0.001" per inch of length). All four edges are ground, and both faces are graduated on the inside and outside edges. This version is graduated in half millimetres on the 8cm leg and in millimetres on the 15cm leg. 1.03mm in thickness.
Each...
Fret Saw 5' Throat
This fret saw has a deeper throat that some people may prefer to the 3" version.
This is a light saw (actually a jewellers saw) with a good blade clamp which reduces blade breakage.
Notice the tension adjustment on the end of the saw. This allows for a very tight blade that limits bowing during use.
Supplied with 12 x 12.5 tpi skip tooth blades.
The saw is designed to cut on the...
Lie-Nielsen Tapered Dovetail Saw with Cherry Handle
Lie-Nielsen have redesigned their three most popular back saws to feature a slight tapering of the blade from toe to heel. This taper gives you better control over precise cuts. When you reach the gauge line on the front of your stock, the blade is slightly above the line on the back side, which reduces the risk of sawing past your line. In addition, the taper introduces an angled approach to your...
Set of 3 Clifton Scrapers
A very useful set of 3 scrapers - made in Sheffield, England
Clifton scrapers are made of medium carbon steel with a hardness of RC40/42. This gives them the best balance of edge holding qualities and a flex in the blade for control in using the tool.
Set of 3 - includes 5" x 2.1/2" rectangle, Concave/Convex & Gooseneck.
0.032" stiff carbon steel.
Burnisher not included.
Rob Cosman Shawn Shim Dovetail Offset Tool
This is the larger of the two Shawn Shims that Rob offers.
One of the most difficult tasks in hand cutting dovetails is accurately transferring the tails and precisely sawing the pins. Rob's improved method of transferring tails to the pin board by offsetting the tailboard by the thickness of the saw kerf takes all the guess work out of where to saw.
Offsetting by the exact thickness can...
Campaign Furniture
By Christopher Schwarz
For almost 200 years, simple and sturdy pieces of campaign furniture were used by people all over the globe, and yet this remarkable furniture style is now almost unknown to most woodworkers and furniture designers.
The latest book from Lost Art Press seeks to restore this style to its proper place by introducing woodworkers to the simple lines, robust joinery and ingenious...
The Tool Chest of Benjamin Seaton
This important publication describes a unique set of over 200 tools from the late eighteenth century, giving an extraordinary insight into the trade practices of the time. The tools were bought by Joseph Seaton for his son Benjamin but were hardly used - instead they survive intact, with an original inventory recording the prices paid at Christopher Gabriel's London toolshop, and can be seen in...
Tormek Centreing Knife Jig
With Tormek's patented KJ-45 Centreing Knife Jig, you'll get symmetrical bevels with the same angle on both sides of the knife, regardless of the thickness or geometry of the blade. Whether you're sharpening a regular kitchen knife or a thicker, tapered hunting knife, you'll get the same results on both bevels of the knife without needing to reset the jig.
The KJ-45 Centreing Knife...
Rob Cosman Dovetail Marking Knife
This dovetail marking knife took Rob Cosman several years to design and perfect. Hand Cut Dovetailing is Rob's specialism and he has no doubt this tool is a great asset to those of you who want a go to marking knife.
This is what Rob said several years back now."For over thirty years one of my most trusted dovetail tools has been my modified marking knife. Working with renowned blade manufacture...
Wild Mango
Wild Mango is a stunning deep cream coloured wood with golden undertones. For furniture, flooring, turning and carving.
Veritas Skew Rabbet + PM-V11 Blade
Like the Stanley #289 that inspired it, it is configured with a blade skewed at a 30° angle to reduce cut resistance, aid in shaving clearance, and help pull the fence tight against the workpiece. Because the blade sits flush with the side of the plane body, corner cuts are clean and accurate.
Adjustable in two axes (vertical and horizontal) for depth and projection, the scoring spur sits...
Brusso Brass Jewellery Cabinet Pull MC-432
The Brusso MC-432 brass decorative knob, with a flattened dome face ringed by a band-shaped edge, is pressure-fit and glued into place. It measures 1/2" in diameter and projects 9/16". The mounting dowel is 5/16" in diameter.
Diameter: 0.500" - 1/2" - 13mm
Length: 0.598" - 9/16" - 14mm
Veritas Japanese Style Awl
These Veritas Japanese style awls have accurately turned conical tips, strong bolsters and comfortable handles. The tip is A2 steel hardened to Rc60-62 for toughness, and can be replaced if damaged.
The bolster, made from stainless steel, transitions smoothly into the taper of the handle to provide a larger hand contact area. The hard maple handles have been torrefied, a heating process that changes...
Ray Iles 6'' Drawknife Sheath
Hand made by Ray Iles in house cobbler in brown leather. Keep you and your drawknife safe and protected from the elements and any potential accidents.
The smaller sized sheath (6'') fits the Ray Iles Gents Drawknife and the Ray Iles 6'' Drawknife.
Shapton Professional Sharpening Stone Holder
Solid sharpening stone holder, of hard rubber with tempered glass core for secure positioning.
Veritas Box-Maker's Plough Plane
This tool has been missing for a very long time. It is based upon the Record 043 Plough Plane which was produced during the heydays of British manufacturing.
An ideal tool for making grooves in boxes and small drawers, this compact plough plane excels at precise grooving and beading applications on small workpieces.
5 1/2" (140mm) long cast-iron body and weighing just 1 lb 7 oz (650 grams),...
A Sharpening Handbook
by Richard D. Wile
There are many books available on sharpening, however as Richard Wile points out, “sharpening has evolved.” He has directed his book towards the novice to intermediate sharpener, with the aim of enhancing their experience with advice on guides, new and traditional media, and techniques.
Techniques cover the primary hand tools in most woodworkers’ workshops...
Nakaya Kataba Classic Saw
The Nakaya Classic Kataba is a well-balanced saw thast is available in two lengths; the 250mm has finer teeth which is designed for fine joinery work, and the more coarse 300mm version for general carpentry. Kataba refers to the blade not having a spine, so is therefore able to perform deeper cuts when required. The blade will still track straight in the cut as the blade will be under tension when...
Crucible Dovetail Template for 1:
6 & 1:8
6 & 1:8
The Crucible Dovetail Template marks out dovetail joints – both the tails and the pins – and allows you to easily and accurately lay out the angled and straight parts of the joint. This template marks out the two most common dovetail slopes, 1:6 and 1:8 (9.5° and 7.1° respectively).
This solid steel template is based on a discontinued version from Woodjoy Tools. We contacted...
Barr Framing Chisels
Barr's framing chisels have become the first choice of professional timber framers and homebuilders. These chisels will take and hold a superior edge saving you time and giving you the best possible results. Hand forged from carbon steel with a flat back and socket handle, they are a must for mortise and tenon work.
The chisels are all 17½" (438mm) long overall.
Available as 1" (25mm), 1½" (38mm),...
Henry Taylor Outcannel Firmer Gouges
Henry Taylor standard length carpenters chisels with gouge shaped blades. Outcannel gouges are ground on the outside face which creates an inside cutting edge. The blades are about about 4" (100mm) long and have stained beech rounded handles with brass ferrules.
Made in Sheffield, England for over 150 years.
Blade about 4" long.
F17 - 1/4" (6mm)
F18 - 3/8" (9mm)
F19...
Lee Valley Cast Scratch Stock
Founded in 1825, Edward Preston & Sons, Ltd. produced some of the finest tools of the Victorian age.
This elegant hand reeder and beading tool can be used to cut decorative profiles into furniture (such as beading on small table or cabinet edges or reeding on chair and table legs). It can also be used with a straight cutter for shallow rabbeting work, such as on mirror and picture frames.
The...
Tormek Square Edge Jig
With the Tormek SE-77 Square Edge Jig, it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also set the jig for a slightly convex shape.
The SE-77 Square Edge Jig is a further development of the SE-76 jig. It has been provided with an...
Chairmaker's Notebook
By Peter Galbert
Some words about Chairmakers Notebook from Chris Schwarz of Lost Art Press...
Whether you are an aspiring professional chairmaker, an experienced green woodworker or a home woodworker curious about the craft, "Chairmaker's Notebook" is an in-depth guide to building your first Windsor chair or an even-better 30th one. Using more than 500 hand-drawn illustrations,...
Narex Mortice Chisels - Set of 4
Robust mortice chisels for chopping out joints and cutting mortices. Sides taper in height and length from tip to shoulder for sidewall clearance. Bulky handle made from hornbeam which is strong enough to withstand heavy blows with a mallet.
Overall length 304mm.
Available as a boxed set of 4 (3mm, 6mm, 10mm and 12mm).
 1.png "20% off")
Henry Taylor No.7 Straight Gouges
20% discount from price shown. Whilst stocks last!
Ingenious Mechanicks
by Christopher Schwarz
Workbenches with screw-driven vises are a fairly modern invention. For more than 2,000 years, woodworkers built complex and beautiful pieces of furniture using simpler benches that relied on pegs, wedges and the human body to grip the work.
While it's easy to dismiss these ancient benches as obsolete, they are - at most - misunderstood.
For the last three years,...
Mortise & Tenon Magazine - Issue 14
Issue Fourteen is no chronicle of the “good old days” – it’s an invitation to personal participation. The authors in this issue have crafted their words to inspire, but their aim is to inspire to something: namely, action. Mortise & Tenon Magazine want to see you roll up your sleeves at the bench, seek to cultivate personal skill, and enjoy the work of your hands.
TABLE...
Pfeil - 8 Tool - Standard Size Carving Set
This Pfeil 8 piece carving set is a starter set containing 7 full size fully forged tools and one chip carving tool. It is supplied in a rugged canvas roll case and the tools are honed and sharpened ready for use.
The tools included are 1/12, 1s/12, 5/12, 4/20, 7/10, 9/4, 12/8 and KERB12.
This in plain English means a 12mm chisel,
12mm skew chisel,
Series 5 12mm gouge,
Series 4 20mm gouge,
Series...
Saburrtooth 1/8'' Ball Nose - 1/4'' x 1/2''
Saburrtooth 1/8" ball nose available in Whispers Extra Fine (white), Fine (yellow), Coarse (green) and Extra Coarse (orange)
Head Diameter: 1/4"
Head Length: 1/2"
If grits are not displayed they are no longer available.
Saburrtooth 1/8'' Bud - 1/4'' x 3/4''
Available in
Fine (yellow), Coarse (green) and Ex Coarse (orange)
Head Diameter: 1/4"
Head Length: 3/4"
Please Note:
Not for use on METAL or CERAMICS.
Safety: Always use approved eye protection and safety devices!
Sizes: Coated diameters are nominal and may vary in size by .150"
Recommended Operating Speed: 4,000 to 25,000 RPM
If grits are not displayed they are no longer...
Pfeil Series 13 - 90° V Parting Tools
The Pfeil Series 13 - 90° V Parting Tools are expertly crafted for woodcarvers who demand precision and versatility. These tools are designed for a range of detailed carving tasks, from lettering and ornamentation to sculpting intricate figures. Their 90° angle makes them ideal for creating sharp, clean cuts that enhance the depth and definition of your work.
Key Features:
High-Quality...
Mortise & Tenon Magazine - Issue 15
The Table of Contents for Issue 15 of Mortise and Tenon Magazine is
“Ambulance for Monuments: Saving Romanian Heritage” – Dragos Nuta
“Making the Versatile Hutch Table” – Joshua A. Klein
“The Traveling ‘Ukulele” – Aaron Keim
“Accustomed to Handle the Hammer: The Nail Making Specialty in Pre-industrial Manufacture” –...
DMT Dia-Sharp 2.5'' Mini-Hone Sharpeners Set of 3
For professional sharpening in tight spaces, the Kit of Dia-Sharp® 2.5-in. Diamond Mini-Hone® Sharpeners has you covered. Featuring ergonomic handles to provides comfortable sharpening, deburring, and honing in tight spaces, you can handily maneuver the easy access tips that measure in at .033" thick. Each diamond surface measures 2.5" x .75" (63mm x 19mm). Included in this kit...
