Sort By
Per Page
View
Grid
List
Gyokucho Compact Set of 2 (Ryoba & Jushi) - 180mm blades
2 saws, each with 180mm blades.
Double edged Ryoba and the single edged, backed Jushi.
Henry Taylor Hand Adze Shallow Curved Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes, this one a gouge end with a shallow/mid gouge or there is a tight gouge (sweep 9) and a 50mm (2") straight edge (like a chisel).
At the other end to the cutting edge is a square faced hammer poll.
All the adzes have an ash handle of 250mm (about 10") .
The overall head size (from the...
Lee Valley Small Plough Plane Blade Roll
To safely store and organize all the blades, this roll features a total of 28 blade pockets, labelled for all Imperial and metric sizes of our standard blades, wide blades and tongue-cutting blades, plus two spare pockets for extra blades. It also includes two pockets for the wide-blade conversion kit and miscellaneous small parts (hex keys, depth stop, etc.).
Internal flaps cover and protect...
ProEdge Woodworking Accessory Kit
The main jigs and belts required for sharpening chisels and plane blades.
The Robert Sorby ProEdge Woodworking Sharpening Accessory Kit includes......
Woodworkers’ Square Guide
Aluminium Oxide Belt 240 grit x1
Trizact Belt 600 grit x1
Trizact Belt 1200 grit x1
Trizact Belt 3000 grit x1
Robert Sorby SteadyPro Turning System
The Robert Sorby SteadyPro is a very easy to use jig that provides additional tool support when hollowing as well as many other woodturning operations.
The versatile SteadyPro fits a wide range of woodturning lathes by utilising the stems from the Robert Sorby modular tool rest system.
With the easy to adjust cantilever action of the clamping rollers, this ensures the optimum control for a large...
Sterling Tool Works Roubo Curves
Roubo Curves® are metal french curves on "steroids", the largest curve in the three piece set is 18 inches long! This metal french curve set is scaled to a perfect size for full scale work.
The set is made from 304 Stainless Steel precision cut with a laser and tumbled in media to debur all the flash and give a nice matte finish that is easy on the eyes for layout work - No Glare.
This will be...
Tormek Axe Jig
The new AX-40 Axe Jig from Tormek.
Easy to use.
Precise and symmetrical sharpening.
Versatile - sharpens convex, flat or concave bevels.
Fits all types of axes.
Works with the Tormek T-8, Tormek T-4 and older models.
Convex, Flat or Concave Bevels
The AX-40 Axe Jig lets you sharpen any kind of axe to a convex, flat, or concave bevel. Each jaw of the jig has two stops that lets you...
Veritas Gents Saw - Rip Cut
Sharing the same, advanced materials as the Veritas dovetail and carcass saws, these Gent’s saws have 200mm long high-carbon steel blades just 0.4mm thick with 0.08mm of teeth set per side.
The 20tpi ripsaw has teeth with a 14" rake angle and a 60° included angle.
Depth of cut is 41mm. For strength and rigidity, the glass and stainless steel-filled polymer spine is moulded over...
Flexcut 3' Draw Knife KN25
This handy little draw knife by Flexcut was developed for fan carving but works great for skinning small areas of bark and roughing-off corners.
Made in the USA by Flexcut.
Robert Sorby Relief Cutting Tool
The Robert Sorby Relief Cutting Tool enables the turner to produce a recess prior to threading.
Robert Sorby Standard Spindle Gouges
The Robert Sorby Standard Spindle Gouges are ideal tools for detailed work between centres, such as creating coves, beads, and other profiles on spindle projects. Available in sizes ranging from 1/4'' to 3/4'', these gouges feature comfortable handles and are suitable for turning projects like goblets, vases, and egg cups.
Henry Taylor Negative Rake Fine Point Tool
The Henry Taylor negative rake fine point tool was designed to be used with The Decorating Elf but can also be used as an individual tool.
Ideal for fine detail and is made with a high speed steel blade.
Abranet Dust Extraction Block Hose
4m extraction hose that will fit straight onto most vacuum cleaners.
Gyokucho Blade for Compact Ryoba 180mm (291)
Replacement for the Gyokucho #291 saw
Clifton No. 410 Shoulder Plane
The Clifton 410 Shoulder Rebate Plane fills the need for a narrow light and accurate shoulder plane. The cutting iron fits smoothly onto the machined pads in the body and can be finely adjusted by means of a screw..
Cutter: 11/16" (18mm) wide
Length of plane: 5.1/2" (138mm)
Approximate weight: 1.1/4"lbs (0.58kg)
Made in Sheffield, UK
Auriou Traditional Stonecarving Point Chisels
The point is the workhorse of the chisels. It is used for roughing out and removing material quickly.
Auriou point chisels are hardened steel which work well on softer stones and marble. For harder stones like granite, carbide tipped chisels are required.
Remember on soft stone, the point chisel can leave a 'stone bruise', or white mark, when it has gone deeper into the stone than your intended surface....
Gyokucho Razorsaw ZA 240mm
Full Name : Gyokucho Razorsaw ZA.
Blade Length : 240mm.
Overall Length : 535mm Rattan / 540mm TPE.
Max Cutting Depth : 55mm.
Teeth Pitch / TPI : 1.5mm / 16.9
Blade Thickness : 0.3mm.
Cutting Width : 0.51mm.
Teeth Pattern : Crosscut.
Gyokucho Product Number : 306 Rattan / 307 TPE.
Weight : 185g Rattan / 240g TPE.
Replacement Blade : S306
A very useful crosscut saw with a...
Henry Taylor Woodcarving Punch - Circle
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Red Rose Reproductions Compass Attachment
Red Rose Reproductions dividers can now be converted to a compass for drawing arcs and circles using the compass attachment. To convert, one of the points is unscrewed from the dividers and replaced with the mounting bracket and screw. The second screw secures a wooden pencil in place. The attachment is universal, and will fit on either the 5" or 7½" divider. Two pencils are included,...
Veritas Miniature Plough Plane
The Veritas Miniature Plough Plane is an intriguing gift for any woodworker, this is a 1/3 scale working model of the popular Veritas small plough plane. It is only 3" long and weighs less than 3 oz.
Made from investment-cast and machined steel, it has a wooden tote and a 3/32" A2 wide blade for cutting slots. The fence is adjustable for offset.
Made in Canada, it comes in a French-fitted...
Henry Taylor Registered Mortice Chisel Set of 5
Made in Sheffield, England for over 150 years.
Blade about 5½" long.
F23 - 1/4" (6mm)
F24a - 3/8" (9mm)
F24 - 1/2" (12mm)
F25 - 3/4" (19mm)
F26 - 1" (25mm)
Spoon Knife Sheath - Fire Hose
A well made sheath from Wood Tools that will age beautifully and protect the edge of the tool and the user for many years. These spoon knife sheaths are made to perfectly fit all our spoon knives.
The sheaths are made from recycled decommisioned fire hose from a local fire station which is super tough and cut-resistant. We love that it also saves the hoses from landfill, and gives them a new lease...
Barr Large Slick
This large slick will take on the toughest jobs with ease. They take and hold a fine edge without being brittle. The handle angles up away from your work surface to allow hand clearance. If you are fed up with poor quality slicks, try one of these. Like all Barr tools, your satisfaction is guaranteed or your money back.
2½" cutting edge, 7½" blade length, length from cutting edge to end of socket...
David Barron Saw & 1 to 8 Dovetail Guide Bundle
The ever popular Gyokucho Razorsaw Dozuki 240mm Rip saw bundled together with the David Barron 1:8 Dovetail Guide.
This is the saw David recommends using with his guides.
Nakaya Kataba 250mm Japanese Folding Saw
The Nakaya Kataba Folding Saw is relatively fine cross-cut saw. Kataba refers to the blade not having a spine, so is therefore able to perform deeper cuts when required. The blade will still track straight in the cut as the blade will be under tension when pulled.
250mm long, 0.5mm thick blade.
Total length when folded 315mm.
Cross-cut teeth.
Tooth spacing / teeth per inch; 1.36mm or 18.7TPI
Comfortable...
Veritas Small Bevel-Up Bench Plane + PM-V11 Blade
This Veritas low angle smoother is 225mm long, 59mm wide and weighs only 1.25kg. It is easier to handle than a full size smoother. Think of it lying somewhere between a large block plane and a full size smoother, then you’ll see just how useful this plane can be.
Like a full size version, it is useful for final finishing of surfaces, end-grain work and for shooting mitres. The ductile cast...
Lie-Nielsen Mortice Chisel Roll
7 pocket leather tool roll, Brass fittings. Deeper tool roll accommodates the Lie-Nielsen mortise chisels. Beautifully made in Maine, USA.
Veritas Lapping Grit 90x Silicon Carbide 4oz
Silicon carbide is ideal for flattening oil and water stones or lapping plane bottoms and blades. Just sprinkle the grit on a piece of glass or a steel lapping plate, add a shot of oil or water (as required), and lap the item flat. This fast and easy process lets you keep all of your stones dead flat.
90x is used for most applications.
Using PSA-backed plastic laminate sheets on glass speeds...
Masasa
This is a hard wood used by turners and in furniture making. Its heartwood is reddish brown with occasional black or grey streak
Flexcut Fine Detail Knife KN35
Designed by Flexcut for making fine detail cuts, the user also has the ability to 'choke up' on the blade for even more precise cuts. The handle shape holds like a pencil or conventional knife.
Tormek DF-200 Diamond Wheel Fine 600G
The Tormek Diamond Wheel Fine with a grit size of 600 is the ultimate all round wheel combining efficient steel removal with smooth surface finish which makes it the perfect versatile wheel.
You can sharpen all types of material, including steel, ceramic and carbide. Fits Tormek T-4 Original and Tormek T-4 Bushcraft.
Included with every diamond wheel is a bottle of Tormek Anti-Corrosion Concentrate....
Tormek LA-220 Leather Honing Wheel
Gently removes the burr which develops during grinding and polishes the bevel. Fits Tormek T-8, Tormek T-7 and Tormek 2000.
It is used together with Tormek Honing Compound PA-70. To get the highest possible sharpness on your edge tool, you finish the sharpening process by honing your tool on the Leather Honing Wheel.
The leather on the Leather Honing Wheel is provided by the tannery Tärnsjö...
Arbortech Power Carving Unit Sanding Discs
Enhance your woodcarving projects with the Arbortech Power Carving Unit Sanding Discs. Designed for optimal performance with the Arbortech Power Carving Unit, these 100mm diameter discs feature a convenient hook and loop backing, allowing for quick and easy abrasive changes. Available in various grits, you can choose from single packs of 8 discs or a mixed pack of 12 (3 of each grit: 60, 120, 180,...
Connells Leather Tool Holdall
The Connell Tool Holdall is ideal for storing a variety of tools. Made from soft moss backed leather for durability.
Guaranteed against faulty workmanship and materials.
Dimensions - 18'' x 7'' x 7''.
Flexcut 5 Piece Craft Carver Set SK106
This Flexcut 5-Piece Craft Carver Set comes with four carving blades, a quick connect ABS handle, leaf project carving blank, and an 11-pocket tool roll. An owner's manual is also included with step-by-step instructions for completing the included project.
Profiles included: SK305 #3 x 3/8', SK306 #6 x 5/16', SK801 #9 x 1.5mm, SK307 70 deg. x 1/4'.
Flexcut 5/16'' (8mm) Scorp KN23
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. 3 additional profiles available.
Henry Taylor Woodcarving Punch - Triangle of Dots
Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.
Muller French-Style Sculptors Adze
Again, these adzes are from Leonhard Muller's Carpenter's Hatchets range but they are based on the traditional French design where the head gradually flares from the poll. 3 sweep widths to chose from and all come with straight hickory handles.
Straight 450mm hickory handles (about 18")
Choice of 65mm, 60mm or 56mm wide medium sweep cutting edge.
Saburrtooth 1/8'' Taper - 1/8'' x 7/8''
Head Diameter: 1/8"
Head Length: 7/8"
If grits are not displayed they are no longer available.
Veritas Gents Saw - Cross Cut
Sharing the same, advanced materials as the Veritas dovetail and carcass saws, these Gent’s saws have 200mm long high-carbon steel blades just 0.4mm thick with 0.08mm of teeth set per side.
The teeth on the 22tpi crosscut saw have a rake angle of 15°, an included angle of 60° and alternating 15° bevel angles so that they sever rather than tear wood fibres.
Depth of cut is 41mm....
Veritas Joiner's Knife
With a design that is both practical and elegant, this joinery knife is an adaptation of the popular Veritas carving knife.
Like their carving knife, it has a brass collet designed for use with standard disposable scalpel blades, holding the blade firmly and allowing quick, easy blade changes. The handle is turned from torrefied maple, with a contoured shape that permits a comfortable, controlled...
Kutzall 1/4'' Ball Nose Burr - 1/4'' x 1-3/8''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Orbicut Spare Cutters
The Orbicut comes with fine HSS cutters as standard. Kirjes have now added a coarse option which has a heavier cut than the standard.
Come as a pair with screws.
Henry Taylor No.3 Allongee Gouge - 2'' (50mm)
These tools were created especially for sculptors who work in large sections of timber.
They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Glenn Lucas 5/8'' Bar Bowl Gouge
The Glenn Lucas 5/8'' Bar Bowl Gouge with 16'' handle.
This tool is great for the rough shaping of wet or dry bowls as well as refining work.
The gouge features a secondary bevel on the heel to give the tool some clearance when going around tight corners making concave curves or coves.
Leonhard Muller Brush-Hook (Billhook)
Leather wrapped handle. Rounded tip.
430mm overall (14")
260mm cutting edge (10")
Veritas Miniature Edge Plane
A 1/3-scale version of the current Veritas iron edge plane, which is the third-generation design of a model they first produced in 1986, this is a fully functional miniature. Useful for fine trimming work on thin stock up to 3/8" thick, such as with small-scale boxes or maquettes, it fits the hand well, making it easy to control under fingertip pressure.
The 2-3/8" long body and lever cap are...
