Barr Bench ChiselsBarr Bench Chisels
Barr Bench Chisels
The bench chisel has the same quality construction as their popular framing chisels, but with a shorter blade length. The chisels are all 13" (325mm) long overall. Available as 1" (25mm), 1½" (38mm), 2" (50mm) or as a set of 3 Bench Chisels.
£168.00 inc VAT
Barr Fat Boy SlickBarr Fat Boy Slick
Barr Fat Boy Slick
If you need a big slick for paring, this is the one! The curved edge skives into the material lessening the initial force needed to start your cut. 3½" cutting edge, 7½" blade length, 16" from edge to end of socket, length with handle 30".
£249.00 inc VAT

Barr Framing ChiselsBarr Framing Chisels
Barr Framing Chisels
Barr's framing chisels have become the first choice of professional timber framers and homebuilders. These chisels will take and hold a superior edge saving you time and giving you the best possible results. Hand forged from carbon steel with a flat back and socket handle, they are a must for mortise and tenon work. The chisels are all 17½" (438mm) long overall. Available as 1" (25mm), 1½" (38mm),...
£195.00 inc VAT
Barr Large SlickBarr Large Slick
Barr Large Slick
This large slick will take on the toughest jobs with ease. They take and hold a fine edge without being brittle. The handle angles up away from your work surface to allow hand clearance. If you are fed up with poor quality slicks, try one of these. Like all Barr tools, your satisfaction is guaranteed or your money back. 2½" cutting edge, 7½" blade length, length from cutting edge to end of socket...
£235.00 inc VAT

Barr Scarf SlickBarr Scarf Slick
Barr Scarf Slick
Invaluable for cutting scarf joints on your timber projects, this slick is a favorite among log and timber smiths. It is also well-suited for cleaning up adzed timbers. Barr's scarf slick has a mild sweep with a curved edge and will give you a slight concave cut. 3½" cutting edge, 7½" blade length, 16" from edge to end of socket, length with handle 30". Please note that this slick is not flat (by...
£236.00 inc VAT
Barr Small SlickBarr Small Slick
Barr Small Slick
Built with the same fine construction as the large slick, the small slick has a 5" blade length making it a little less hefty. 2½" cutting edge, 5½" blade length, length from cutting edge to end of socket 12", length with handle 26
£220.00 inc VAT

Henry Taylor Heavy Duty Socket Firmer ChiselsHenry Taylor Heavy Duty Socket Firmer Chisels
Henry Taylor Heavy Duty Socket Firmer Chisels
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers. The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased. Forged...
from £69.60 inc VAT
Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4
Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers. The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased. Forged...
£312.00 inc VAT

Henry Taylor Registered Mortice ChiselHenry Taylor Registered Mortice Chisel
Henry Taylor Registered Mortice Chisel
Made in Sheffield, England for over 150 years. Blade about 5½" long. F23 - 1/4" (6mm) F24a - 3/8" (9mm) F24 - 1/2" (12mm) F25 - 3/4" (19mm) F26 - 1" (25mm)
from £25.20 inc VAT
Henry Taylor Registered Mortice Chisel Set of 5Henry Taylor Registered Mortice Chisel Set of 5
Henry Taylor Registered Mortice Chisel Set of 5
Made in Sheffield, England for over 150 years. Blade about 5½" long. F23 - 1/4" (6mm) F24a - 3/8" (9mm) F24 - 1/2" (12mm) F25 - 3/4" (19mm) F26 - 1" (25mm)
£138.00 inc VAT

Henry Taylor Swan Neck ChiselsHenry Taylor Swan Neck Chisels
Henry Taylor Swan Neck Chisels
A Henry Taylor swan neck chisel is used to clean the bottom of mortices. The chisel is levered in use, not struck. Available in 1/4", 5/16" and 3/8".
from £22.80 inc VAT
Holster for Robert Sorby Timber Framer's Slick
Holster for Robert Sorby Timber Framer's Slick
A quality riveted leather holster for safer carriage of the Robert Sorby Timber Framer's Slick.
from £52.00 inc VAT

Leather Chisel Guard Set - Large (Set 2)
Leather Chisel Guard Set - Large (Set 2)
Set contains the following leather chisel guards: 2 x 3-3/8", 2 x 2-3/8", 2 x 2''
£31.00 inc VAT
Leather Chisel Guard Set - Small (Set 1)
Leather Chisel Guard Set - Small (Set 1)
Set contains the following leather chisel guards: 2 x 2", 2 x 1¼", 2 x 1", 2 x ¾", 6 x ½''
£36.00 inc VAT

Narex Mortice Chisels - Set of 4Narex Mortice Chisels - Set of 4
Narex Mortice Chisels - Set of 4
Robust mortice chisels for chopping out joints and cutting mortices. Sides taper in height and length from tip to shoulder for sidewall clearance. Bulky handle made from hornbeam which is strong enough to withstand heavy blows with a mallet. Overall length 304mm. Available as a boxed set of 4 (4mm, 6mm, 10mm and 12mm).
£66.00 inc VAT
Robert Sorby Bevel Edged Framing Chisel
Robert Sorby Bevel Edged Framing Chisel
Very similar to the RS285 framing chisel that the blade is beveled to give extra clearance in the cut. Tapered along the length. Ash handle. Shorter than the RS285 - 388mm overall length.
from £84.15 inc VAT

Robert Sorby Corner Chisel
Robert Sorby Corner Chisel
Designed for squaring up the ends of mortises, grooves or housings. The faces are precision ground to produce clean, accurate 90 degree angles. Often used nowadays to clean up after a router. Sharpen each face individually with an oil stone. The origins of this tool are from wheelwrights and millwrights who used a v shaped chisel to hollow out mortises in wheels and wooden beams (often referred...
£73.17 inc VAT
Robert Sorby Double Hooped Registered Chisel
Robert Sorby Double Hooped Registered Chisel
Originally it was thought that registered (or shipwrights chisels) were used by barge builders and they first appeared in the mid 19th century. “strong ship” or registered chisels were also described in the Scottish tool manufacturer Mathieson’s catalogue of 1900. More recently these chisels have become very popular with joiners and timber framers for mortising. The double hoops give...
from £37.07 inc VAT

Robert Sorby Framing Chisel
Robert Sorby Framing Chisel
The Robert Sorby Framing Chisel is the same principle as their registered chisel but with a longer blade and handle for deeper morticing work. Overall Size:- 495mm Blade Length:- 267mm
from £63.90 inc VAT
Robert Sorby Heavy Duty Corner Chisel
Robert Sorby Heavy Duty Corner Chisel
A heavyweight 1" (25mm) wide bruzz (corner chisel) for cleaning up deep corners of mortises. Ash Handle Overall Size:- 380-407mm Blade Length 239mm
£142.80 inc VAT

Barr 7/8' Corner Chisel
Barr 7/8' Corner Chisel
Corner chisels are forged from tough carbon steel; these chisels are hand-tapered, bent to 90 degrees, then flat ground. Terrific for cleaning out mortises. 7/8" (22.225mm) x 7/8" (22.225mm) x 18" (450mm)
£230.00 inc VAT
Robert Sorby Leather Edge GuardsRobert Sorby Leather Edge Guards
Robert Sorby Leather Edge Guards
We highly recommend edge guards to protect yourself and your tools. The chisel guards are available in 1", 1½" and 2" sizes, these tough leather guards are a snug fit for both the 285 and 286 framing chisels. The slick guards are available in 60mm and 85mm sizes suitable for the 289 framer's slicks.
from £7.20 inc VAT

Robert Sorby Timber Framer's Slick
Robert Sorby Timber Framer's Slick
This heavy duty timber framers and boat builders slick from Robert Sorby has an offset blade to allow for clearance when working in deep sockets and mortises. It can also be used as a massive paring chisel. Choice of two widths - 2-3/8" (60mm) & 3-3/8" (85mm). Solid one piece forged blade including the heavy tang which is set deep into the handle. A heavy duty socket is fitted between...
from £134.73 inc VAT