Friday Finds

Welcome to Friday Finds!

Here you can find pre-owned tools and clearance items that are as new, second hand and used, surplus stock, things we need to move along including an occasional vintage or antique tool. Enjoy browsing this unique section of our website and grab yourself a bit of a bargain.

We will be adding a selection of tools each Friday lunchtime for the foreseable future.

Our descriptions are accurate and we do not ebellish the condition of the tools on offer.

We will offer hand tools for sale on a commssion sale basis.

These tools are not owned by Classic Hand Tools and may not form part of our regular portfolio. We are selling on behalf of a customer (who we charge a commsssion). Usually these tools are sold without the requirement to pay VAT in the UK (unless our client is VAT registered which is unlikely).

Further information on Commission Sales can be found here

If you would like to see past sales of pre-owned tools, perhaps to get an idea of what your tools might be worth, visit our Friday Finds Sold Archive.

We buy and sell old tools, too

Occasionally we will buy old tools - mainly good usable chisels, some metal planes, gauges etc.

If you are thinning out your tool collecion wish to sell by commsssion or sell directly to us, please get in contact.

Commssion sale items should have a minimum consignment value of £200. Items of lower value may be sold but will attract a shipping small additional shipping charge of £5 (if sold singularly).

Individual tools such as planes or sets of chisels usually sell well and because we are selling high quality new hand tools to a wide customer base we tend to attract better prices than the auction route. Further information on Commission Sales here

For good quality branded hand tools please send in a few pictures for an initial appraisal. Classic Hand Tools can pick up the tools (by courier), evaluate an agreed selling price after detailed inspection, do the photography and accurately list the items for sale to our wide database. Once sold, we deal with the shipping of the item which can be worldwide.

Please give us a call first to discuss before making the trip to visit us.

Active Sales

Friday Finds Sold Archive

Lie-Nielsen - Cross Peen Hammer (Brass Head) [Preowned]

Pre-owned. G++ condition. Hickory handled. 12" overall. The head is 4" wide and weighs 4 ounces. Used for nailing tacks and making fine blade adjustments on your planes. This has been used and the head has been cleaned up a bit. It has some superficial stain marks, the head is solid (no wobble) so this hammer will work perfectly. The handle is excellent. Original box...

£70.00 (VAT exempt)

Lie-Nielsen - Cross Peen Hammer (Hardened A2 Steel Head) [Preowned]

£70.00 (VAT exempt)

Lie-Nielsen - Cross Peen Hammer (A2 Steel Head) [Preowned]

£70.00 (VAT exempt)

Sterling Toolworks - Plane Adjusting Hammer [Preowned]

This is a commission sale. Pre-owned but hardly used in G++ condition. Comes with a spare "spud" in a Sterling Toolworks branded bag. This is what we say about the hammer on our website, where it sells new for £175: "The Sterling Tool Works Plane Adjustment Hammer is designed to be used to adjust plane blades and wooden Plane wedges for wooden hand planes. The Hammer...

£145.00 (VAT exempt)

Pfeil Woodcarving Punches - Set of 9 Swiss Background Punches [Preowned, As New]

Made by Pfeil - Switzerland Unused - fine condition - a commission sale. These Pfeil Punches for wood are for creating background detail for your carvings. They are made from steel and weigh 540g each. They are housed in a wooden base. Size - 10mm x 10mm x 135mm each. These punches retail new for £170

£145.00 (VAT exempt)

Pfeil Lino & Block Cutting Tools - Set of 12 [Preowned, As New]

Made by Pfeil - Switzerland These tools are very popular based on our experience in selling Pfeil carving tools for the last 15 years (but clearly not by our customer though, as he has never used them!). Precisely ground and polished. Pear handles, 70mm blade length, 125mm overall length. The set which is housed in a wooden stand includes: 1 straight chisel 8mm (L1-8); 1 skew...

£215.00 (VAT exempt)

Set of 6 Incannel Firmer Gouges - Henry Taylor, Sheffield [Preowned, As New]

These Henry Taylor incannel gouges are ground on the inside face (as normal) which creates an outside cutting edge. The blades are about 4" (100mm) long and have stained beech rounded handles with brass ferrules. Made in Sheffield, England for over 150 years. This set comprises the following gouges (if bought new from our site they would cost you £214) F11 - 1/4" (6mm) wide F12...

£175.00 (VAT exempt)

5 Bevel Edge Chisels (with Boxwood Handles) - Marples, Sheffield [Preowned]

These are pre-owned - little used chisels with cosmetic staining to the steel blades. We have quickly cleaned them up and we think they will be absolutely fine for many years to come presenting a very affordable opportunity to get a good spread of bench chisels. 3/8", 1/2", 5/8", 1", 1 1/4" wide Boxwood round handles with brass ferrules (the largest one is split but it isn't working free and could...

£75.00 (VAT exempt)

Set of 12 IYOROI Japanese Oire Nomi Bench Chisels [Preowned, As New]

Still in their original wrapping, this set comprises of 12 bevel edge chisels from the brand IYOROI in linen roll. 223mm in overall length. Red oak handles. Black finish to the blades with polished hollows. Black finish to striking hoops. Hollow ground backs with single flutes for all widths. Widths are as follows: 1.5, 3, 6, 9, 12,15,18, 21, 24, 30, 36 & 42mm. Denim tool...

£435.00 (VAT exempt)

Iyoroi Spearpoint 18mm Drawshave Chisel - Yari Kanna [Preowned, As New]

Boxwood handle - unused. In fact whilst it looks like a chisel it is best described as a plane (kanna). These work by drawing the edge towards you. They are also described as a Japanese skew chisel that tapers to a point from 18mm. The length of the blade is 60mm with an overall length of 210mm Japanese Yari Kanna are unusual tools, descended from ancient Korean and Japanese bent chisels used...

£65.00 (VAT exempt)

Shirogami Ichigou Nomi - 24mm Japanese Chisel [Preowned, As New]

Unused, as new. White paper tool steel and high carbon steel laminated blade with red oak handle and steel striking hoop. 240mm overall. 60mm blade. White paper steel (Shirogami in Japanese) is a carbon tool steel that is ideally suited to the production of chisels. It exhibits superior durability when compared to alloyed blue paper steels. Widely available in the UK for about £70...

£58.00 (VAT exempt)

Tormek Drill Bit Sharpening Attachment [Preowned, As New]

Pre-owned - unused, as new. This is a commission sale. With the Tormek Drill Bits Sharpening Attachment you can sharpen your drill bits (3-22mm) with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape. See the video on the...

£215.00 (VAT exempt)

Clifton No.3 - Smoothing Plane [Preowned]

Pre-owned, a commission sale. This plane has seen little use and is in G++ condition with original box and packaging. This is the smallest smoothing plane Clifton make; ideal for those with smaller hands, or those with smaller jobs that don't require so much heft. Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment...

£265.00 (VAT exempt)

Veritas - Edge Trimming Plane (Left Hand) [Preowned]

Pre-owned, a commission sale. This is what we and Lee Valley Tools say about the edge trimming plane "Edge-trimming planes are used for final trimming cuts on jointed boards to ensure smooth edges at exactly 90° to the face, and for working end grain. In many instances you will need only one model; the appropriate choice is often based on which of your hands is dominant. However, neither...

£135.00 (VAT exempt)

Veritas - Small Shoulder Plane [Preowned]

Pre-owned, a commission sale. This is what we and Lee Valley Tools say about the small shoulder plane "Designed to seat nicely in the hand, the smallest Veritas shoulder plane is easily controlled using a one-handed grip. The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest for the palm. The...

£185.00 (VAT exempt)

Veritas No.112 - Large Scraping Plane [Preowned]

Pre-owned, a commission sale. Original packaging, instruction leaflet and Veritas plane sack. This plane hasn't seen much work at all. G++ This is what we and Lee Valley Tools say about this large scraping plane "The Veritas® scraping plane is the ideal tool for final smoothing, especially when you have to deal with highly figured wood or reversing grain. With a well-sharpened blade...

£215.00 (VAT exempt)

Lie-Nielsen - Low Angle Smoothing Plane [Preowned]

Pre-owned, a commission sale. G++ condition. Very little use. Comes with branded plane sack. From our main Lie-Nielsen Section "The Low Angle Smoothing Plane is based on the rare Stanley 164, and is essentially a shorter version of the Low Angle Jack Plane - with an adjustable mouth, and a massive 2" (5.08cm) wide, 3/16" (4.7mm) thick blade, set at 12°. However, this tool is...

£295.00 (VAT exempt)

Lie-Nielsen No.60 1/2 - Low Angle Block Plane (Adjustable Mouth) [Preowned]

Lie-Nielsen No.60 1/2 - Low Angle Block Plane (Adjustable Mouth) [Preowned]

Pre-owned, a commission sale. From our main Lie-Nielsen Section "The Lie-Nielsen No 60½ Block Plane is based upon the old Stanley No 60½. This is a superb little block plane and should be in your tool kit, useful for all woodworking jobs in particular great for trimming end grain. The movable shoe in front of the blade allows you to easily adjust the mouth opening - fine mouth...

£175.00 (VAT exempt)

Blue Spruce Toolworks - 16oz Round-Headed Mallet [Preowned]

Blue Spruce Toolworks - 16oz Round-Headed Mallet [Preowned]

Infused curly maple head with an attractive beech handle. Brass ferrule. There are 3 or 4 minor dinks (2mm x 2mm) on the head (easily missed at first glance) and some superficial scratches consistent with just a few malet blows. This mallet has not been used much at all. We don't think this particular combination of handle/head is available currently.

£84.00 inc VAT

Lie-Nielsen No.62 - Low Angle Jack Plane [Preowned]

Lie-Nielsen No.62 - Low Angle Jack Plane [Preowned]

This pre-owned plane has a few minor scratch marks on the sole but this plane has seen little use. No box but comes with a Lie-Nielsen branded plane sack. This is what we say about the plane in the main Lie-Nielsen section of our web site: ''The Lie-Nielsen No.62 Low Angle Jack Plane. What is not to like? You take the most popular and useful jack plane and bed it at a low angle (12°)....

£260.00 inc VAT

Lie-Nielsen No.073 - Large Shoulder Plane [Preowned]

Pre-owned in excellent condition with a branded plane sack. This description is from our main Lie-Nielsen section where this plane (without plane sack is normally available for £376 - but we are currently out of stock!) ''A versatile, general purpose shoulder plane with nice heft and the best size to start with. This all-metal shoulder plane is based on the Record 073, which in...

£315.00 inc VAT

Lie-Nielsen No.7 - Joiner Plane [Preowned, As New]

Lie-Nielsen No.7 - Joiner Plane [Preowned, As New]

Pre-owned in fabulous condition, as new. ''The Lie-Nielsen No.7 Jointer Plane is a great plane for edge jointing and flattening larger areas. The late, great Alan Peters used his No.7 for pretty much everything, and today we still come across ex-students which still favour their jointer over any other plane.'' The equivalent of a later type Stanley Bedrock No.607 jointer plane. 22''...

£525.00 inc VAT

Lie-Nielsen No.6 - Fore Plane [Preowned, As New]

Pre-owned in fabulous condition, as new. The Lie-Nielsen No.6 Fore Plane is sized midway between a Jack and a Jointer. The No.6 Fore Plane is designed to further true the surface after the Jack has sized it. Its length enables it to skim off high spots as it bridges low spots, delivering a levelled surface ready for the smoothing plane. 18" (457mm) long 2 3/8" (60mm) blade. A2...

£495.00 inc VAT

Lie-Nielsen No.4 1/2 - Smoothing Plane [Preowned, As New]

Lie-Nielsen No.4 1/2 - Smoothing Plane [Preowned, As New]

In fabulous condition, as new. "Solidly built, this is the ultimate smoothing plane. It is longer, wider, and heavier than the No. 4, and its extra thick blade eliminates the possibility of chatter. Comes with a 45° frog as standard. Other frogs are available separately. 10 3/8'' (264mm) long. 2 3/8'' (60mm) blade. A2 steel. Iron body 5½lbs (2.5kg).''

£395.00 inc VAT

Martinez Signature Series 7075 - Metric Rapid Square (with base) [Preowned]

This is a commission sale. Used but in G++ condition. This US made roofing square with a 180mm metric blade designed for accuracy and durability. Made with aerospace grade aluminium, hard anodised, this square is light and strong with very, easy to read measurements. The base (or heel) is anodised aluminium in red (no level) providing a reliable base that improves control and precision in marking...

£88.00 (VAT exempt)

Lie-Nielsen No.71 - Large Router Plane (Closed Throat) [Preowned]

This is a commission sale. Used but in G++ condition 3/8” straight blade. Reversible curved/straight detachable fence. Instruction leaflet. This is our description from our LN section… “A router plane is a great tool for working shallow mortices - hinge gains, inlay, door locks, trimming tenons and the like. Lie-Nielsen's version is based on an early Stanley...

£215.00 (VAT exempt)

Lie-Nielsen No.042 - Medium Shoulder Plane [Preowned]

Pre-owned, this is a commission sale. G++, little used condition Just a few surface scratches to the body. Full blade. Instruction leaflet included. This description of the plane is from the Lie-Nielsen planes section of our web site where this plane is available new for £329. ''An improved version of the now discontinued Record 042. This plane is 3/4'' wide and...

£215.00 (VAT exempt)

Lie-Nielsen - Boggs Spokeshave (Curved) [Preowned]

Pre-owned, used. G++ condition. A commission sale. Note: the curve on this spokeshave is extremely shallow. The Boggs Spokeshave is hefty and solid, weighing 12oz. Designed for fine, precise shaping in all woods. Body is 10" long with a 1" wide very slightly curved sole. The sole of this spokeshave has a gentle (almost imperceptible) 5 degree radius for working inside curves. 2"...

£185.00 (VAT exempt)

Lie-Nielsen - Boggs Spokeshave (Flat) [Preowned]

Lie-Nielsen - Boggs Spokeshave (Flat) [Preowned]

Pre-owned, used G++. A commission sale. The original Boggs Spokeshave is hefty and solid, weighing 12 oz. Designed for fine, precise shaping in all woods. Body is 10" long with a 1" wide flat sole. 2" wide x 1/8" thick A2 blade. Bronze body and cap. Hickory handles. Weight is 12 oz. Instruction leaflet and scruffy original box. This spokeshave hasn’t...

£145.00 (VAT exempt)

Veritas - Small Plow Plane (Right Hand with 6 Metric Blades) [Preowned]

Pre-owned – a commission sale 4, 5, 6, 7 ,8 & 10mm blades come with this plane which has been lightly used. Original packaging (the box is a bit tatty) and Instruction booklet. The condition of the plane and blades is Good ++ (G++) which indicates it is not new, but has been well cared for and has no defects over and above superficial cosmetic blemishes. “Closest in size...

£250.00 (VAT exempt)

Bad Axe Toolworks - D8 Panel Saw [Preowned]

Bad Axe Toolworks - D8 Panel Saw [Preowned]

A beauty and a steal. Pre-owned, commission sale. G++ condition – superficial wear marks only. The D8 is dubbed by Bad Axe Tool Works as the 'Henry Disston' in honour of the legendary saw maker himself. The Bad Axe D8 features a meticulously tapered grind achieved through advanced grinding techniques, ensuring a strong, agile blade that performs reliably under pressure. ergonomic...

£275.00 (VAT exempt)

5 Tasai Bench Chisels [Preowned]

These are pre-owned bevel edged bench chisels from the forge of master blacksmith Akio Tasai in Japan. A commission sale. They have been used very sparingly; the hoops have been struck and there are burrs to be attended to in order to safeguard your fingers but that is a quick and easy job. The chisels and box are in G++ condition. Laminated steel with single hollows. The cutting edge is blue...

£1,075.00 (VAT exempt)

Flexcut Left-Handed Carving Jack [Clearance]

FLEXCUT CARVIN JACK - older version, new. LEFT HANDED For you whittlers out there! This is the older version of the Carvin Jack launched successfully by USA manufacturer Flexcut some 20 years ago to great acclaim. This a new unused version of the Carvin Jack in original packaging (the new version is labelled 2.0) Blades firmly lock in both open and closed positions Supplied with SlipStrop...

£75.00 inc VAT

Lie-Nielsen SD-3 - Saw Nut Screwdriver [Preowned]

Tenon saw nut and thicknessing gauge screwdriver. Pre-owned, in great condition with a few dings to the handle. Curly Maple Handle (newer versions have cherry handles) Modelled after gunsmith’s screwdrivers with machined tips, these screwdrivers are made to fit specific screw slots on Lie-Nielsen tools to give you control without slipping. Hardened 416 Stainless Steel blades, numbered...

£42.00 inc VAT

Lie-Nielsen SD-9 - Honing Guide Screwdriver [Preowned]

Pre-owned, in great condition with a few dings to the handle. This screwdriver is made to fit the captive screws in the removable jaws for our Honing Guide. It may be useful for other jobs as well. 5.40'' Overall Length .285'' Blade Diameter .045'' Tip Thickness Curly Maple Handle (newer versions have cherry handles). Modeled after gunsmith’s screwdrivers...

£42.00 inc VAT

5 French Walnut Handles (with Tapered Brass Ferrules) [Clearance]

Attractive French Walnut handles for chisels, rasps etc 5" overall (125mm) with 3/4" diameter ferrule, rounded profile with waist. The handles are pre-drilled with a 4mm diameter hole about 12mm deep. Clear lacquer finish. New old stock.

£30.00 inc VAT

Lie-Nielsen - Spare Blade for a LN 97 1/2 Small Chisel Plane [Preowned, Unused]

As new, pre-owned. Replacement blade for the Lie-Nielsen No. 97½ Small Chisel Plane. Comes with a 25° flat ground bevel. 1¾" wide x 3/16" thick A2 cryogenically treated Tool Steel

£54.00 inc VAT

Woodpeckers - Rule Stop 2 [Preowned, As New]

Pre-owned but unused, so as new. Simply take any ruler (or look at our Woodpeckers Friday Finds or Woodpeckers Section) and add this well engineered stop to help you repeat your accurate marking out. Selling in our Woodpecker Section for £52

£38.00 inc VAT

30%
OFF

File Sets

The RH Preyda File Sets, made from prized Arkansas Novaculite, are essential for deburring, chamfering, and creating smooth finishes. These files are highly valued by craftsmen such as gunsmiths, dentists, machinists, and jewelers. File shapes: Round, Square, Triangular, and Knife Blade Size: 4" x 3/8" (101.6mm x 9.5mm) Grit options: Soft (400-600), Surgical Black (4000-6000), Translucent...

Was £51.00 Now from £35.70 inc VAT

view options

25%
OFF

Knife Blade Files

Prized by craftsmen worldwide, Arkansas Novaculite is the only known substance that can sharpen a blade and polish it as well. These Multi-Form Files are designed to accommodate the various shapes and gauges of V-tools. The dimensions and specifications of each stone will match tools ranging from ultra-flat to semi-circular and a variety of curves in between. Multi-Forms are ideal for sharpening, finishing...

Was £14.40 Now from £10.80 inc VAT

view options

25%
OFF

Square Double Angle Files

The Square Double Angle Files offered by Classic Hand Tools are high-quality sharpening tools made from Arkansas Novaculite, a natural material prized for its ability to both sharpen and polish blades effectively. These files are designed to accommodate the various shapes and gauges of V-tools, making them ideal for detailed sharpening, finishing, and maintaining the edges of your tools. Key Features: Material:...

Was £14.40 Now from £10.80 inc VAT

view options

Bad Axe Toolworks – 14'' Hybrid Tenon Saw [Preowned, SOLD]

Bad Axe Toolworks – 14'' Hybrid Tenon Saw [Preowned, SOLD]

Pre-owned, commission sale. G++ condition –We have given this a very light clean and many of the usual grubby spots that always accumulate have disappeared but some remain with some scratches. Closed maple handle with brass nuts. The saw blade depth is 3 3/8” The saw back is black oxidised steel. 11 ppi

£185.00 (VAT exempt)

Claire Minihan - Walnut & Brass Travisher [Preowned, SOLD]

Claire Minihan - Walnut & Brass Travisher [Preowned, SOLD]

Pre-owned, a commission sale. Unusually for us we were unaware of Claire Minihan as a tool maker but we are glad to be offering one of her travishers for sale. A bit of research informs us that her travishers are a favourite with the likes of Peter Galbert USA (“she makes the best travishers in the world”). In 2024 she was offering this travisher for about $500 but you would have to wait well...

£235.00 (VAT exempt)

Lie-Nielsen - Dovetail Saw [Preowned, SOLD]

Lie-Nielsen - Dovetail Saw [Preowned, SOLD]

Pre-owned with a few dinks and minor scratches/staining marks. 15ppi Rip cut Lie-Nielsen dovetail saw – 9” blade. This has been used but has a lot of life left to cut several hundred more dovetails. A commission sale.

£115.00 (VAT exempt)

Lie-Nielsen No.5 - Jack Plane [Preowned, SOLD]

Lie-Nielsen No.5 - Jack Plane [Preowned, SOLD]

Used. The equivalent of a later type Stanley Bedrock No.605 jack plane. 14" long (355mm) 2" wide blade (50mm) Iron body 5-1/2lbs (2.5kg) Selling on our main site for £469 (currently out of stock though) This plane has been used and shows scratch wear consistent with light use. It is in ready to go mode. Condition is G++ Supplied with Lie-Nielsen branded tool sack.

£365.00 inc VAT

Lie-Nielsen SD-6 - Block Plane Screwdriver [Preowned, SOLD]

Screwdriver for the No.140 skew block plane. This screwdriver is made to fit the fence and side plate locking screws on our Low Angle Skew Block Planes. It also fits the cap screw on our No. 60 1/2 Block Plane. Pre-owned, in great condition with a few dings to the handle. Curly Maple Handle (newer versions have cherry handles). Modelled after gunsmith’s screwdrivers with machined...

£42.00 inc VAT